8bitworkshop/presets/atari8-800/hellopm.dasm

; Atari 8-bit sample code
; Written by Daniel Boris (danlb_2000@yahoo.com)
; Modified by Steven Hugg @8bitworkshop
; Assemble with DASM
;

        processor 6502

	include "atari.inc"

;*************** Variable ***********************
line	equ 	$20                  ;Current DLI line
pm0pos	equ	$21                  ;Current pos of P0

;*************** Start of Code *******************

	org     $a000           ;Start of cartridge area
Start

;************* Setup display list *******************

        ldx     #$21            ;Number of bytes in list
dlloop                          ;Copy display list to RAM
        lda     dlist,x         ;Get byte
        sta     $1000,x         ;Copy to RAM
        dex                     ;next byte
        bpl     dlloop

;************* Setup hardware registers *************

        lda     #$22            ;Set color PF0
        sta     COLOR0
        lda     #$0F            ;Set color PF1
        sta     COLOR1
        lda     #$84            ;Set color PF2
        sta     COLOR2             
        lda     #$00            ;Set Display list pointer
        sta     SDLSTL
        lda     #$10
        sta     SDLSTH
        lda     #$f8            ;Set Charcter Set Base
        sta     CHBAS
        lda     #$22            ;Enable DMA
        sta     SDMCTL
	; load display list interrupt address
	lda	#<dli
	sta	VDSLST
	lda	#>dli
	sta	VDSLST+1
	; activate display list interrupt and vertical blank interrupt
	lda	#$C0
	sta	NMIEN

;************ Draw display graphics *******************

        ldy     #$02            ;Draw bars on screen
        lda     #$18            ;Screen memory starts at $1800
        sta     $81             
        lda     #$00
        sta     $80
        ldx     #$18
crloop5
        lda     #$FF            ;Bar 4 pixels wide of color 3
        sta     ($80),y         ;Store data
        iny                     
        iny                     ;Skip 4 pixels
        lda     #$55            ;Bar 4 pixels wide of color 1
        sta     ($80),y         ;Store data
        iny
        iny                     ;Skip 4 pixels
        lda     #$AA            ;Bar 4 pixels wide of color 2
        sta     ($80),y         ;Store data
        tya
        clc         
        adc     #$06            ;Move pointer to next line
        tay
        dex                     ;Next line
        bne     crloop5         ;Branch if not done

;************* Setup Player/Missile registers ***************

        lda     #$3A           ;Enable DMA (single line resolution/
        sta     SDMCTL         ;normal background)
        lda     #$20           ;Set PM base address ($200)
        sta     PMBASE
        lda     #$03           ;Enable players and missiles
        sta     GRACTL
        lda     #$16           ;Color of player 0
        sta     PCOLR0
        ldy     #$00
        lda     #$02           ;Size of player 0
        sta     SIZEP0
        lda     #$01           ;Give players priority over playfield
        sta     GPRIOR
      

;************ Copy player data to RAM ********************************

pmloop1        
        lda     pm1,y           ;Get data         
        sta     $2430,y         ;Write it into RAM
        sta     $24C0,y
        iny
        cpy     #$08            ;Copy 8 bytes
        bne     pmloop1

;************ Move player ********************************************

        ldx     #$20            ;Starting position of player
mvloop1
        jsr     waitvb          ;Wait for a vertical bank
        lda     #$00            ;Reset line counter
        sta     line
        stx     HPOSP0          ;Set position of player
        stx     pm0pos          ;Save position for DLI
        inx
        cpx     #$C0            ;Check for end of move
        bne     mvloop1         ;If not keep moving right
        lda     #$04            ;Give playfield priority player
        sta     GPRIOR

mvloop2
        jsr     waitvb          ;Wait for a vertical blank
        lda     #$00            ;Reset line counter
        sta     line
        stx     HPOSP0          ;Set position of player
        stx     pm0pos          ;Save position for DLI
        dex
        cpx     #$30            ;Check for end of move
        bne     mvloop2         ;If not keep moving left
        lda     #$01            ;Give player priority over playfield
        sta     GPRIOR
        jmp     mvloop1         ;Continue looping

;************ Wait for vertical blank ************************

waitvb
        lda     RTCLOK+2    ;Read timer (this is incremented during VB)
waitvb2
        cmp     RTCLOK+2    ;Did it change?
        beq     waitvb2     ;If not keep waiting
        rts

;************ Display list interrupt ************************

dli
        pha             ;Save A
        inc line        ;Increment the line counter
        lda line        ;Past the fifth DLI?
        cmp #$05
        bne done        ;If not then exit DLI
        lda pm0pos      ;Get player 0 position
        eor #$FF        ;Invert it
        sta HPOSP0      ;Set player 0 position
        lda #$0F        ;Change player color
        sta COLPM0      ;
        ; Note: Player color is changed in hardware register not the shadow
        ; register so it takes effect immediatly. 
done
        pla             ;Restore A
        rti             ;Done

;************* Display list data ****************************
; starts at $1000

dlist   .byte     $70,$70,$70      ;24 blank scanlines
        .byte     $48,$00,$18      ;Mode 8 and Load memory scan $1800
        .byte     $88,$88,$88,$88,$88,$88,$88   ;23 more line of mode 8
        .byte     $88,$88,$88,$88,$88,$88,$88,$88,$88,$88,$88,$88,$88
        .byte     $88,$88,$88
        .byte     $41,$00,$10       ;Jump back to start at $1000

;************* Player shape *********************************

pm1     .byte     %00111100
        .byte     %01000010
        .byte     %10100101
        .byte     %10000001
        .byte     %10100101
        .byte     %10011001
        .byte     %01000010
        .byte     %00111100

;************** Cart reset vector **************************

        ;Cartridge footer
        org     CARTCS
        .word   Start   ; cold start address
        .byte   $00     ; 0 == cart exists
        .byte   $04     ; boot cartridge
        .word   Start   ; start