more verilog presets

presets/verilog/7segment.v

@@ -0,0 +1,80 @@
+`include "hvsync_generator.v"
+
+module seven_segment_decoder(digit, segments);
+  input [3:0] digit;
+  output [6:0] segments;
+
+  always @(*)
+    case(digit)
+      0: segments = 7'b1111110;
+      1: segments = 7'b0110000;
+      2: segments = 7'b1101101;
+      3: segments = 7'b1111001;
+      4: segments = 7'b0110011;
+      5: segments = 7'b1011011;
+      6: segments = 7'b1011111;
+      7: segments = 7'b1110000;
+      8: segments = 7'b1111111;
+      9: segments = 7'b1111011;
+      default: segments = 7'b0000000;
+    endcase
+endmodule
+
+module segments_to_bitmap(segments, line, bits);
+  input [6:0] segments;
+  input [2:0] line;
+  output [4:0] bits;
+  
+  always @(*)
+    case (line)
+      0:bits = (segments[6]?5'b11111:0) ^ (segments[5]?5'b00001:0) ^ (segments[1]?5'b10000:0);
+      1:bits = (segments[1]?5'b10000:0) ^ (segments[5]?5'b00001:0);
+      2:bits = (segments[0]?5'b11111:0) ^ (|segments[5:4]?5'b00001:0) ^ (|segments[2:1]?5'b10000:0);
+      3:bits = (segments[2]?5'b10000:0) ^ (segments[4]?5'b00001:0);
+      4:bits = (segments[3]?5'b11111:0) ^ (segments[4]?5'b00001:0) ^ (segments[2]?5'b10000:0);
+      default:bits = 0;
+    endcase
+endmodule
+
+module test_numbers_top(
+  input clk, reset,
+  output hsync, vsync,
+  output [2:0] rgb
+);
+  wire display_on;
+  wire [8:0] hpos;
+  wire [8:0] vpos;
+  
+  hvsync_generator hvsync_gen(
+    .clk(clk),
+    .reset(reset),
+    .hsync(hsync),
+    .vsync(vsync),
+    .display_on(display_on),
+    .hpos(hpos),
+    .vpos(vpos)
+  );
+  
+  wire [3:0] digit = hpos[7:4];
+  wire [2:0] xofs = hpos[3:1];
+  wire [2:0] yofs = vpos[3:1];
+  wire [4:0] bits;
+  wire [6:0] segments;
+  
+  seven_segment_decoder decoder(
+    .digit(digit),
+    .segments(segments)
+  );
+  
+  segments_to_bitmap numbers(
+    .segments(segments),
+    .line(yofs),
+    .bits(bits)
+  );
+
+  wire r = display_on && 0;
+  wire g = display_on && bits[~xofs];
+  wire b = display_on && 0;
+  assign rgb = {b,g,r};
+
+endmodule

presets/verilog/ball_slip_counter.v

@@ -13,11 +13,12 @@ module ball_paddle_top(clk, reset, hsync, vsync, rgb);
   reg [8:0] ball_htimer;
   reg [8:0] ball_vtimer;
   
-  reg [8:0] ball_horiz_stop = 204;
   reg [8:0] ball_horiz_move = -2;
-  reg [8:0] ball_vert_stop = 251;
   reg [8:0] ball_vert_move = 2;
   
+  localparam ball_horiz_stop = 204;
+  localparam ball_vert_stop = 251;
+  
   hvsync_generator hvsync_gen(
     .clk(clk),
     .reset(reset),
@@ -40,7 +41,7 @@ module ball_paddle_top(clk, reset, hsync, vsync, rgb);
         ball_htimer <= ball_horiz_stop;
     end else
       ball_htimer <= ball_htimer + 1;
-  end;
+  end
 
   // update vertical timer
   always @(posedge hsync or posedge reset)
@@ -51,30 +52,33 @@ module ball_paddle_top(clk, reset, hsync, vsync, rgb);
       ball_vtimer <= ball_vert_stop + ball_vert_move;
     else
       ball_vtimer <= ball_vtimer + 1;
-  end;
+  end
-  
-  // vertical bounce
-  always @(posedge ball_vert_collide)
-  begin
-    ball_vert_move <= -ball_vert_move;
-  end;
-
-  // horizontal bounce
-  always @(posedge ball_horiz_collide)
-  begin
-    ball_horiz_move <= -ball_horiz_move;
-  end;
-
-  wire ball_hgfx = ball_htimer >= 508;
-  wire ball_vgfx = ball_vtimer >= 508;
-  wire ball_gfx = ball_hgfx && ball_vgfx;
   
   // collide with vertical and horizontal boundaries
   wire ball_vert_collide = ball_vgfx && vpos >= 240;
   wire ball_horiz_collide = ball_hgfx && hpos >= 256 && vpos == 255;
   
+  // vertical bounce
+  always @(posedge ball_vert_collide)
+  begin
+    ball_vert_move <= -ball_vert_move;
+  end
+
+  // horizontal bounce
+  always @(posedge ball_horiz_collide)
+  begin
+    ball_horiz_move <= -ball_horiz_move;
+  end
+
+  // compute ball display
+  wire ball_hgfx = ball_htimer >= 508;
+  wire ball_vgfx = ball_vtimer >= 508;
+  wire ball_gfx = ball_hgfx && ball_vgfx;
+
+  // compute grid display
   wire grid_gfx = (((hpos&7)==0) && ((vpos&7)==0));
 
+  // combine into RGB signals
   wire r = display_on && (ball_hgfx | ball_gfx);
   wire g = display_on && (grid_gfx | ball_gfx);
   wire b = display_on && (ball_vgfx | ball_gfx);

presets/verilog/cpu8.v

@@ -0,0 +1,198 @@
+
+`define OP_LOAD_A	4'h0
+`define OP_LOAD_B	4'h1
+`define OP_ADD		4'h2
+`define OP_SUB		4'h3
+`define OP_INC		4'h4
+`define OP_DEC		4'h5
+`define OP_ASL		4'h6
+`define OP_LSR		4'h7
+`define OP_OR		4'h8
+`define OP_AND		4'h9
+`define OP_XOR		4'ha
+
+module ALU(
+  input  [7:0] A,
+  input  [7:0] B,
+  output [8:0] Y,
+  input  [3:0] aluop
+);
+  
+  always @(*)
+    case (aluop)
+      `OP_LOAD_A:	Y = {1'b0, A};
+      `OP_LOAD_B:	Y = {1'b0, B};
+      `OP_ADD:		Y = A + B;
+      `OP_SUB:		Y = A - B;
+      `OP_INC:		Y = A + 1;
+      `OP_DEC:		Y = A - 1;
+      `OP_ASL:		Y = {A[7], A + A};
+      `OP_LSR:		Y = {A[0], A >> 1};
+      `OP_OR:		Y = {1'b0, A | B};
+      `OP_AND:		Y = {1'b0, A & B};
+      `OP_XOR:		Y = {1'b0, A ^ B};
+      default:		Y = 9'bx;
+    endcase
+  
+endmodule
+
+`define REG_A 1'b0
+`define REG_B 1'b1
+`define I_CONST(r,x) { 2'b00, r, x }
+`define I_LOAD_ADDR(r,addr) { 3'b010, r, addr }
+`define I_STORE_ADDR(r,addr) { 3'b011, r, addr }
+`define I_COMPUTE(r,op) { 3'b100, r, op }
+`define I_RESET 8'hff
+
+module CPU(
+  input        clk,
+  input        reset,
+  output [7:0] address,
+  input  [7:0] data_in,
+  output [7:0] data_out,
+  output       write
+);
+  
+  reg [7:0] ip;
+  reg [7:0] opcode;
+  reg [3:0] aluop;
+  reg [7:0] A, B;
+  reg [8:0] Y;
+  reg [2:0] state;
+  
+  reg carry;
+  reg zero;
+  wire [1:0] flags = { zero, carry };
+  
+  localparam S_RESET = 0;
+  localparam S_SELECT = 1;
+  localparam S_DECODE = 2;
+  localparam S_LOAD_ADDR = 3;
+  localparam S_STORE_ADDR = 4;
+  localparam S_COMPUTE = 5;
+
+  wire load_const = opcode[3:1] == 3'b111;
+  
+  ALU alu(.A(A), .B(B), .Y(Y), .aluop(aluop));
+  
+  always @(posedge clk)
+    if (reset) begin
+      state <= 0;
+      write <= 0;
+    end else begin
+      case (state)
+        // state 0: reset
+        S_RESET: begin
+          ip <= 8'h80;
+          write <= 0;
+          state <= S_SELECT;
+        end
+	// state 1: select opcode address
+        S_SELECT: begin
+          address <= ip;
+          ip <= ip + 1;
+          write <= 0;
+          state <= S_DECODE;
+        end
+        // state 2: read/decode opcode
+        S_DECODE: begin
+          casez (data_in)
+            8'b00??????: begin
+              if (data_in[5])
+                B <= {3'b0, data_in[4:0]};
+              else
+                A <= {3'b0, data_in[4:0]};
+              state <= S_SELECT;
+            end
+            8'b010?????: begin
+              address <= {4'b0, data_in[3:0]};
+              state <= S_LOAD_ADDR;
+            end
+            8'b011?????: begin
+              address <= {4'b0, data_in[3:0]};
+              state <= S_STORE_ADDR;
+            end
+            8'b100?????: begin
+              aluop <= data_in[3:0];
+              state <= S_COMPUTE;
+            end
+            default: begin
+              state <= S_RESET; // reset
+            end
+          endcase
+          opcode <= data_in;
+        end
+        // state 3: load address
+        S_LOAD_ADDR: begin
+          if (opcode[4])
+            B <= data_in;
+          else
+            A <= data_in;
+          state <= S_SELECT;
+        end
+        // state 4: store address
+        S_STORE_ADDR: begin
+          if (opcode[4])
+            data_out <= B;
+          else
+            data_out <= A;
+          write <= 1;
+          state <= S_SELECT;
+        end
+        // state 5: compute ALU op and flags
+        S_COMPUTE: begin
+          if (opcode[4])
+            B <= Y[7:0];
+          else
+            A <= Y[7:0];
+          carry <= Y[8];
+          zero <= ~|Y;
+          state <= S_SELECT;
+        end
+      endcase
+    end
+
+endmodule
+
+module test_CPU_top(
+  input  clk,
+  input  reset,
+  output [7:0] address_bus,
+  output reg [7:0] to_cpu,
+  output [7:0] from_cpu,
+  output write_enable
+);
+
+  reg [7:0] ram[127:0];
+  reg [7:0] rom[127:0];
+  
+  CPU cpu(.clk(clk),
+          .reset(reset),
+          .address(address_bus),
+          .data_in(to_cpu),
+          .data_out(from_cpu),
+          .write(write_enable));
+
+  // does not work as (posedge clk)
+  always @(*)
+    if (write_enable)
+      ram[address_bus[6:0]] = from_cpu;
+    else if (address_bus[7] == 0)
+      to_cpu = ram[address_bus[6:0]];
+    else
+      to_cpu = rom[address_bus[6:0]];
+  
+  initial begin
+    // address 0x80
+    rom['h00] = `I_CONST(`REG_A, 5'h1f);
+    rom['h01] = `I_COMPUTE(`REG_A, `OP_ASL);
+    rom['h02] = `I_COMPUTE(`REG_A, `OP_ASL);
+    rom['h03] = `I_COMPUTE(`REG_A, `OP_ASL);
+    rom['h04] = `I_COMPUTE(`REG_A, `OP_ASL);
+    rom['h05] = `I_COMPUTE(`REG_B, `OP_LOAD_A);
+    rom['h06] = `I_STORE_ADDR(`REG_B, 4'd1);
+    rom['h07] = `I_LOAD_ADDR(`REG_B, 4'd1);
+    rom['h08] = `I_RESET;
+  end
+
+endmodule

presets/verilog/digits10.v

@@ -1,11 +1,10 @@
 `include "hvsync_generator.v"
 
-module digits10_case(digit, yofs, bits);
+module digits10_case(
-  
+  input [3:0] digit,
-  input [3:0] digit;
+  input [2:0] yofs,
-  input [2:0] yofs;
+  output [4:0] bits
-  output [4:0] bits;
+);
-
   wire [6:0] caseexpr = {digit,yofs};
   always @(*)
     case (caseexpr)/*{w:5,h:5,count:10}*/
@@ -73,13 +72,12 @@ module digits10_case(digit, yofs, bits);
     endcase
 endmodule
 
-module digits10_array(digit, yofs, bits);
+module digits10_array(
-  
+  input [3:0] digit,
-  input [3:0] digit;
+  input [2:0] yofs,
-  input [2:0] yofs;
+  output [4:0] bits
-  output [4:0] bits;
+);
-  
+  reg [4:0] bitarray[16][5];
-  reg [4:0] bitarray[10][5];
 
   assign bits = bitarray[digit][yofs];
   
@@ -143,21 +141,25 @@ module digits10_array(digit, yofs, bits);
     bitarray[9][2] = 5'b11111;
     bitarray[9][3] = 5'b00001;
     bitarray[9][4] = 5'b11111;
+
+    for (int i = 10; i <= 15; i++)
+      for (int j = 0; j <= 4; j++) 
+        bitarray[i][j] = 0; 
   end
 endmodule
 
-module test_numbers_top(clk, hsync, vsync, rgb);
+module test_numbers_top(
-
+  input clk, reset,
-  input clk;
+  output hsync, vsync,
-  output hsync, vsync;
+  output [2:0] rgb
-  output [2:0] rgb;
+);
   wire display_on;
   wire [8:0] hpos;
   wire [8:0] vpos;
   
   hvsync_generator hvsync_gen(
     .clk(clk),
-    .reset(0),
+    .reset(reset),
     .hsync(hsync),
     .vsync(vsync),
     .display_on(display_on),

presets/verilog/gates.v

@@ -0,0 +1,16 @@
+module gates(clk, out_not, out_and, out_or, out_xor, in);
+  
+  input  clk;
+  output out_not, out_and, out_or, out_xor;
+  output reg [3:0] in;
+  
+  not U1(out_not,in[0]);
+  and U2(out_and,in[0],in[1],in[2],in[3]);
+  or  U3(out_or,in[0],in[1],in[2],in[3]);
+  xor U4(out_xor,in[0],in[1],in[2]);
+  
+  always @(posedge clk) begin
+    in <= in + 1;
+  end
+  
+endmodule;

presets/verilog/hvsync_generator.v

@@ -1,6 +1,23 @@
 `ifndef HVSYNC_GENERATOR_H
 `define HVSYNC_GENERATOR_H
 
+// constant declarations for TV-simulator sync parameters
+localparam H_DISPLAY       = 256; // horizontal display width
+localparam H_BACK          =  23; // horizontal left border (back porch)
+localparam H_FRONT         =   7; // horizontal right border (front porch)
+localparam H_SYNC          =  23; // horizontal sync width
+localparam H_SYNC_START    = H_DISPLAY + H_FRONT;
+localparam H_SYNC_END      = H_DISPLAY + H_FRONT + H_SYNC - 1;
+localparam H_MAX           = H_DISPLAY + H_BACK + H_FRONT + H_SYNC - 1;
+
+localparam V_DISPLAY       = 240; // vertical display height
+localparam V_TOP           =   5; // vertical top border
+localparam V_BOTTOM        =  14; // vertical bottom border
+localparam V_SYNC          =   3; // vertical sync # lines
+localparam V_SYNC_START    = V_DISPLAY + V_BOTTOM;
+localparam V_SYNC_END      = V_DISPLAY + V_BOTTOM + V_SYNC - 1;
+localparam V_MAX           = V_DISPLAY + V_TOP + V_BOTTOM + V_SYNC - 1;
+
 module hvsync_generator(
   input clk,
   input reset,
@@ -10,23 +27,6 @@ module hvsync_generator(
   output [8:0] vpos
 );
 
-  // constant declarations for TV-simulator sync parameters
-  localparam H_DISPLAY       = 256; // horizontal display width
-  localparam H_BACK          =  23; // horizontal left border (back porch)
-  localparam H_FRONT         =   7; // horizontal right border (front porch)
-  localparam H_SYNC          =  23; // horizontal sync width
-  localparam H_SYNC_START    = H_DISPLAY + H_FRONT;
-  localparam H_SYNC_END      = H_DISPLAY + H_FRONT + H_SYNC - 1;
-  localparam H_MAX           = H_DISPLAY + H_BACK + H_FRONT + H_SYNC - 1;
-
-  localparam V_DISPLAY       = 240; // vertical display height
-  localparam V_TOP           =   5; // vertical top border
-  localparam V_BOTTOM        =  14; // vertical bottom border
-  localparam V_SYNC          =   3; // vertical sync # lines
-  localparam V_SYNC_START    = V_DISPLAY + V_BOTTOM;
-  localparam V_SYNC_END      = V_DISPLAY + V_BOTTOM + V_SYNC - 1;
-  localparam V_MAX           = V_DISPLAY + V_TOP + V_BOTTOM + V_SYNC - 1;
-
   wire hmaxxed = (hpos == H_MAX) || reset;
   wire vmaxxed = (vpos == V_MAX) || reset;
   
@@ -37,7 +37,7 @@ module hvsync_generator(
       hpos <= 0;
     else
       hpos <= hpos + 1;
-  end;
+  end
 
   // increment vertical position counter
   always @(posedge clk)
@@ -47,7 +47,7 @@ module hvsync_generator(
         vpos <= vpos + 1;
       else
         vpos <= 0;
-  end;
+  end
   
   // compute hsync + vsync + display_on signals
   always @(posedge clk)

presets/verilog/ram1.v

@@ -0,0 +1,82 @@
+`include "hvsync_generator.v"
+`include "digits10.v"
+
+module RAM_1KB(clk, addr, din, dout, we);
+  input  clk;		// clock
+  input  [9:0] addr;	// 10-bit address
+  input  [7:0] din;	// 8-bit data input
+  output [7:0] dout;	// 8-bit data output
+  input  we;		// write enable
+  
+  reg [7:0] mem [1024]; // 1024x8 bit memory
+  
+  always @(posedge clk) begin
+    if (we)		// if write enabled
+      mem[addr] <= din;	// write memory from din
+    dout <= mem[addr];	// read memory to dout
+  end
+endmodule
+
+module test_framebuf_top(
+  input clk, reset,
+  output hsync, vsync,
+  output [2:0] rgb
+);
+  wire display_on;
+  wire [8:0] hpos;
+  wire [8:0] vpos;
+  
+  wire [9:0] ram_addr;
+  wire [7:0] ram_read;
+  reg [7:0] ram_write;
+  reg ram_writeenable = 0;
+  
+  RAM_1KB ram(
+    .clk(clk),
+    .dout(ram_read),
+    .din(ram_write),
+    .addr(ram_addr),
+    .we(ram_writeenable)
+  );
+  
+  hvsync_generator hvsync_gen(
+    .clk(clk),
+    .reset(reset),
+    .hsync(hsync),
+    .vsync(vsync),
+    .display_on(display_on),
+    .hpos(hpos),
+    .vpos(vpos)
+  );
+  
+  wire [4:0] row = vpos[7:3];
+  wire [4:0] col = hpos[7:3];
+  wire [3:0] digit = ram_read[3:0];
+  wire [2:0] yofs = vpos[2:0];
+  wire [2:0] xofs = hpos[2:0];
+  wire [4:0] bits;
+  
+  assign ram_addr = {row,col};
+  
+  digits10_case numbers(
+    .digit(digit),
+    .yofs(yofs),
+    .bits(bits)
+  );
+
+  wire r = display_on && 0;
+  wire g = display_on && bits[~xofs];
+  wire b = display_on && 0;
+  assign rgb = {b,g,r};
+
+  always @(posedge clk)
+    if (display_on && vpos[2:0] == 7)
+      case (hpos[2:0])
+        6: begin
+          ram_write <= (ram_read + 1);
+          ram_writeenable <= 1;
+        end
+        7: ram_writeenable <= 0;
+      endcase
+      
+endmodule

presets/verilog/ram2.v

@@ -0,0 +1,77 @@
+`include "hvsync_generator.v"
+`include "digits10.v"
+
+module RAM_1KB_tri(clk, addr, data, we);
+  input  clk;
+  input  [9:0] addr;
+  inout  [7:0] data;
+  input  we;
+  
+  reg [7:0] mem [1023:0];
+  assign data = !we ? mem[addr] : 8'bz;
+  always @(posedge clk) begin
+    if (we)
+      mem[addr] <= data;
+  end
+endmodule
+
+module test_framebuf_top(
+  input clk, reset,
+  output hsync, vsync,
+  output [2:0] rgb
+);
+  wire display_on;
+  wire [8:0] hpos;
+  wire [8:0] vpos;
+  
+  reg ram_writeenable = 0;
+  wire [9:0] ram_addr = {row,col};
+  wire [7:0] ram_data = ram_writeenable ? ram_write : 8'bz;
+  wire [7:0] ram_read = ram_writeenable ? 8'bz : ram_data;
+  reg [7:0] ram_write;
+  
+  RAM_1KB_tri ram(
+    .clk(clk),
+    .data(ram_data),
+    .addr(ram_addr),
+    .we(ram_writeenable)
+  );
+  
+  hvsync_generator hvsync_gen(
+    .clk(clk),
+    .reset(reset),
+    .hsync(hsync),
+    .vsync(vsync),
+    .display_on(display_on),
+    .hpos(hpos),
+    .vpos(vpos)
+  );
+  
+  wire [4:0] row = vpos[7:3];
+  wire [4:0] col = hpos[7:3];
+  wire [3:0] digit = ram_read[3:0];
+  wire [2:0] yofs = vpos[2:0];
+  wire [4:0] bits;
+  
+  digits10_array numbers(
+    .digit(digit),
+    .yofs(yofs),
+    .bits(bits)
+  );
+
+  wire r = display_on && 0;
+  wire g = display_on && bits[hpos[2:0] ^ 3'b111];
+  wire b = display_on && 0;
+  assign rgb = {b,g,r};
+  
+  always @(posedge clk)
+    if (display_on && vpos[2:0] == 7)
+      case (hpos[2:0])
+        6: begin
+          ram_write <= ram_read + 1;
+          ram_writeenable <= 1;
+        end
+        7: ram_writeenable <= 0;
+      endcase
+      
+endmodule

presets/verilog/sprite_bitmap.v

@@ -1,14 +1,11 @@
 `include "hvsync_generator.v"
 
-module car_bitmap(yofs, bits);
+module car_bitmap(
-  
+  input [3:0] yofs,
-  input [3:0] yofs;
+  output [7:0] bits
-  output [7:0] bits;
+);
-  
   reg [7:0] bitarray[16];
-
   assign bits = bitarray[yofs];
-  
   initial begin/*{w:8,h:16}*/
     bitarray[0] = 8'b0;
     bitarray[1] = 8'b101110;
@@ -29,10 +26,9 @@ module car_bitmap(yofs, bits);
   end
 endmodule
 
-module sprite_bitmap_top(clk, hsync, vsync, rgb, hpaddle, vpaddle);
+module sprite_bitmap_top(clk, reset, hsync, vsync, rgb);
 
-  input clk;
+  input clk, reset;
-  input hpaddle, vpaddle;
   output hsync, vsync;
   output [2:0] rgb;
   wire display_on;
@@ -44,12 +40,12 @@ module sprite_bitmap_top(clk, hsync, vsync, rgb, hpaddle, vpaddle);
   reg [3:0] car_sprite_yofs;
   wire [7:0] car_sprite_bits;
   
-  reg [7:0] player_x = 128;
+  reg [8:0] player_x = 128;
-  reg [7:0] player_y = 128;
+  reg [8:0] player_y = 128;
   
   hvsync_generator hvsync_gen(
     .clk(clk),
-    .reset(0),
+    .reset(reset),
     .hsync(hsync),
     .vsync(vsync),
     .display_on(display_on),
@@ -63,23 +59,22 @@ module sprite_bitmap_top(clk, hsync, vsync, rgb, hpaddle, vpaddle);
 
   always @(posedge hsync)
     // start sprite?
-    if (vpos == {1'0,player_y})
+    if (vpos == player_y)
       car_sprite_yofs <= 15;
     else if (car_sprite_yofs != 0)
       car_sprite_yofs <= car_sprite_yofs - 1;
   
   always @(posedge clk)
-    if (display_on) begin
+    if (hpos == player_x)
-      if (hpos == {1'0,player_x})
       car_sprite_xofs <= 15;
     else if (car_sprite_xofs != 0)
       car_sprite_xofs <= car_sprite_xofs - 1;
-    end
 
   // mirror sprite in X direction
-  wire car_gfx = car_sprite_bits[car_sprite_xofs>=8 ? 
+  wire [3:0] car_bit = car_sprite_xofs>=8 ? 
                                  15-car_sprite_xofs:
-                                 car_sprite_xofs];
+                                 car_sprite_xofs;
+  wire car_gfx = car_sprite_bits[3'(car_bit)];
 
   wire r = display_on && car_gfx;
   wire g = display_on && car_gfx;

presets/verilog/sprite_rotation.v

@@ -0,0 +1,305 @@
+`include "hvsync_generator.v"
+
+module tank_bitmap(addr, bits);
+  
+  input [7:0] addr;
+  output [7:0] bits;
+  
+  reg [15:0] bitarray[256];
+  
+  assign bits = (addr[0]) ? bitarray[addr>>1][15:8] : bitarray[addr>>1][7:0];
+  
+  initial begin/*{w:16,h:16,bpw:16,count:5}*/
+    bitarray[0'h00] = 16'b11110000000;
+    bitarray[0'h01] = 16'b11110000000;
+    bitarray[0'h02] = 16'b1100000000;
+    bitarray[0'h03] = 16'b1100000000;
+    bitarray[0'h04] = 16'b111101101111000;
+    bitarray[0'h05] = 16'b111101101111000;
+    bitarray[0'h06] = 16'b111111111111000;
+    bitarray[0'h07] = 16'b111111111111000;
+    bitarray[0'h08] = 16'b111111111111000;
+    bitarray[0'h09] = 16'b111111111111000;
+    bitarray[0'h0a] = 16'b111111111111000;
+    bitarray[0'h0b] = 16'b111100001111000;
+    bitarray[0'h0c] = 16'b111100001111000;
+    bitarray[0'h0d] = 16'b0;
+    bitarray[0'h0e] = 16'b0;
+    bitarray[0'h0f] = 16'b0;
+    
+    bitarray[0'h10] = 16'b111000000000;
+    bitarray[0'h11] = 16'b1111000000000;
+    bitarray[0'h12] = 16'b1111000000000;
+    bitarray[0'h13] = 16'b11000000000;
+    bitarray[0'h14] = 16'b11101110000;
+    bitarray[0'h15] = 16'b1101110000;
+    bitarray[0'h16] = 16'b111101111110000;
+    bitarray[0'h17] = 16'b111101111111000;
+    bitarray[0'h18] = 16'b111111111111000;
+    bitarray[0'h19] = 16'b11111111111000;
+    bitarray[0'h1a] = 16'b11111111111100;
+    bitarray[0'h1b] = 16'b11111111111100;
+    bitarray[0'h1c] = 16'b11111001111100;
+    bitarray[0'h1d] = 16'b1111001110000;
+    bitarray[0'h1e] = 16'b1111000000000;
+    bitarray[0'h1f] = 16'b1100000000000;
+    
+    bitarray[0'h20] = 16'b0;
+    bitarray[0'h21] = 16'b0;
+    bitarray[0'h22] = 16'b11000011000000;
+    bitarray[0'h23] = 16'b111000111100000;
+    bitarray[0'h24] = 16'b111101111110000;
+    bitarray[0'h25] = 16'b1110111111000;
+    bitarray[0'h26] = 16'b111111111100;
+    bitarray[0'h27] = 16'b11111111110;
+    bitarray[0'h28] = 16'b11011111111110;
+    bitarray[0'h29] = 16'b111111111111100;
+    bitarray[0'h2a] = 16'b111111111001000;
+    bitarray[0'h2b] = 16'b11111110000000;
+    bitarray[0'h2c] = 16'b1111100000000;
+    bitarray[0'h2d] = 16'b111110000000;
+    bitarray[0'h2e] = 16'b11110000000;
+    bitarray[0'h2f] = 16'b1100000000;
+
+    bitarray[0'h30] = 16'b0;
+    bitarray[0'h31] = 16'b0;
+    bitarray[0'h32] = 16'b110000000;
+    bitarray[0'h33] = 16'b100001111000000;
+    bitarray[0'h34] = 16'b1110001111110000;
+    bitarray[0'h35] = 16'b1111010111111100;
+    bitarray[0'h36] = 16'b1111111111111111;
+    bitarray[0'h37] = 16'b1111111111111;
+    bitarray[0'h38] = 16'b11111111110;
+    bitarray[0'h39] = 16'b101111111110;
+    bitarray[0'h3a] = 16'b1111111101100;
+    bitarray[0'h3b] = 16'b11111111000000;
+    bitarray[0'h3c] = 16'b1111111100000;
+    bitarray[0'h3d] = 16'b11111110000;
+    bitarray[0'h3e] = 16'b111100000;
+    bitarray[0'h3f] = 16'b1100000;
+
+    bitarray[0'h40] = 16'b0;
+    bitarray[0'h41] = 16'b0;
+    bitarray[0'h42] = 16'b0;
+    bitarray[0'h43] = 16'b111111111000;
+    bitarray[0'h44] = 16'b111111111000;
+    bitarray[0'h45] = 16'b111111111000;
+    bitarray[0'h46] = 16'b111111111000;
+    bitarray[0'h47] = 16'b1100001111100000;
+    bitarray[0'h48] = 16'b1111111111100000;
+    bitarray[0'h49] = 16'b1111111111100000;
+    bitarray[0'h4a] = 16'b1100001111100000;
+    bitarray[0'h4b] = 16'b111111111000;
+    bitarray[0'h4c] = 16'b111111111000;
+    bitarray[0'h4d] = 16'b111111111000;
+    bitarray[0'h4e] = 16'b111111111000;
+    bitarray[0'h4f] = 16'b0;
+  end
+endmodule
+
+module sprite_renderer(clk, vstart, load, hstart, rom_addr, rom_bits, 
+                       hmirror, vmirror,
+                       gfx, busy);
+  
+  input clk, vstart, load, hstart;
+  input hmirror, vmirror;
+  output [4:0] rom_addr;
+  input [7:0] rom_bits;
+  output gfx;
+  output busy = state != WAIT_FOR_VSTART;
+
+  reg [2:0] state;
+  reg [3:0] ycount;
+  reg [3:0] xcount;
+  
+  reg [15:0] outbits;
+  
+  localparam WAIT_FOR_VSTART = 0;
+  localparam WAIT_FOR_LOAD   = 1;
+  localparam LOAD1_SETUP     = 2;
+  localparam LOAD1_FETCH     = 3;
+  localparam LOAD2_SETUP     = 4;
+  localparam LOAD2_FETCH     = 5;
+  localparam WAIT_FOR_HSTART = 6;
+  localparam DRAW            = 7;
+  
+  always @(posedge clk)
+    begin
+      case (state)
+        WAIT_FOR_VSTART: begin
+          ycount <= 0;
+          // set a default value (blank) for pixel output
+          // note: multiple non-blocking assignments are vendor-specific
+	  gfx <= 0;
+          if (vstart) state <= WAIT_FOR_LOAD;
+        end
+        WAIT_FOR_LOAD: begin
+          xcount <= 0;
+	  gfx <= 0;
+          if (load) state <= LOAD1_SETUP;
+        end
+        LOAD1_SETUP: begin
+          rom_addr <= {vmirror?~ycount:ycount, 1'b0};
+          state <= LOAD1_FETCH;
+        end
+        LOAD1_FETCH: begin
+	  outbits[7:0] <= rom_bits;
+          state <= LOAD2_SETUP;
+        end
+        LOAD2_SETUP: begin
+          rom_addr <= {vmirror?~ycount:ycount, 1'b1};
+          state <= LOAD2_FETCH;
+        end
+        LOAD2_FETCH: begin
+          outbits[15:8] <= rom_bits;
+          state <= WAIT_FOR_HSTART;
+        end
+        WAIT_FOR_HSTART: begin
+          if (hstart) state <= DRAW;
+        end
+        DRAW: begin
+          // mirror graphics left/right
+          gfx <= outbits[hmirror ? ~xcount[3:0] : xcount[3:0]];
+          xcount <= xcount + 1;
+          if (xcount == 15) begin // pre-increment value
+            ycount <= ycount + 1;
+            if (ycount == 15) // pre-increment value
+              state <= WAIT_FOR_VSTART; // done drawing sprite
+            else
+	      state <= WAIT_FOR_LOAD; // done drawing this scanline
+          end
+        end
+      endcase
+    end
+  
+endmodule
+
+module rotation_selector(rotation, bitmap_num, hmirror, vmirror);
+  input [4:0] rotation;
+  output [2:0] bitmap_num;
+  output hmirror, vmirror;
+  
+  always @(*)
+    case (rotation[3:2])
+      0: begin
+        bitmap_num = {1'b0, rotation[1:0]};
+        hmirror = 0;
+        vmirror = 0;
+      end
+      1: begin
+        bitmap_num = -rotation[2:0];
+        hmirror = 0;
+        vmirror = 1;
+      end
+      2: begin
+        bitmap_num = {1'b0, rotation[1:0]};
+        hmirror = 1;
+        vmirror = 1;
+      end
+      3: begin
+        bitmap_num = -rotation[2:0];
+        hmirror = 1;
+        vmirror = 0;
+      end
+    endcase
+
+endmodule
+
+module tank_controller(clk, reset, hpos, vpos, hsync, vsync, 
+                       sprite_addr, sprite_bits, gfx);
+  
+  input clk;
+  input reset;
+  input hsync;
+  input vsync;
+  input [8:0] hpos;
+  input [8:0] vpos;
+  output [7:0] sprite_addr;
+  input [7:0] sprite_bits;
+  reg hmirror;
+  reg vmirror;
+  output gfx;
+  wire busy;
+
+  reg [7:0] player_x = 64;
+  reg [7:0] player_y = 64;
+  reg [4:0] player_rot = 0;
+  
+  wire vstart = {1'b0,player_y} == vpos;
+  wire hstart = {1'b0,player_x} == hpos;
+
+  sprite_renderer renderer(
+    .clk(clk),
+    .vstart(vstart),
+    .load(hsync),
+    .hstart(hstart),
+    .hmirror(hmirror),
+    .vmirror(vmirror),
+    .rom_addr(sprite_addr[4:0]),
+    .rom_bits(sprite_bits),
+    .gfx(gfx),
+    .busy(busy));
+  
+  rotation_selector rotsel(
+    .rotation(player_rot),
+    .bitmap_num(sprite_addr[7:5]),
+    .hmirror(hmirror),
+    .vmirror(vmirror));
+  
+  always @(posedge vsync)
+    player_rot <= player_rot + 1;
+
+endmodule
+
+module test_top(clk, reset, hsync, vsync, rgb);
+
+  input clk;
+  input reset;
+  output hsync;
+  output vsync;
+  output [2:0] rgb;
+  wire display_on;
+  wire [8:0] hpos;
+  wire [8:0] vpos;
+
+  reg [7:0] paddle_x;
+  reg [7:0] paddle_y;
+  
+  hvsync_generator hvsync_gen(
+    .clk(clk),
+    .reset(reset),
+    .hsync(hsync),
+    .vsync(vsync),
+    .display_on(display_on),
+    .hpos(hpos),
+    .vpos(vpos)
+  );
+  
+  wire [7:0] tank_sprite_addr;
+  wire [7:0] tank_sprite_bits;
+  
+  tank_bitmap tank_bmp(
+    .addr(tank_sprite_addr), 
+    .bits(tank_sprite_bits));
+  
+  tank_controller tank1(
+    .clk(clk),
+    .reset(reset),
+    .hpos(hpos),
+    .vpos(vpos),
+    .hsync(hsync),
+    .vsync(vsync),
+    .sprite_addr(tank_sprite_addr), 
+    .sprite_bits(tank_sprite_bits),
+    .gfx(tank1_gfx)
+  );
+  
+  wire tank1_gfx;
+  wire unused;
+  
+  wire r = display_on && tank1_gfx;
+  wire g = display_on && tank1_gfx;
+  wire b = display_on && tank1_gfx;
+  assign rgb = {b,g,r};
+
+endmodule

presets/verilog/test_hvsync.v

@@ -1,10 +1,12 @@
 `include "hvsync_generator.v"
 
-module test_hvsync_top(clk, hsync, vsync, rgb);
+module test_hvsync_top(
+  input clk,
+  output hsync,
+  output vsync,
+  output [2:0] rgb
+);
   
-  input clk;
-  output hsync, vsync;
-  output [2:0] rgb;
   wire display_on;
   wire [8:0] hpos;
   wire [8:0] vpos;

src/platform/verilog.js

@@ -5,12 +5,16 @@ var VERILOG_PRESETS = [
   {id:'hvsync_generator.v', name:'Video Sync Generator'},
   {id:'test_hvsync.v', name:'Test Pattern'},
   {id:'lfsr.v', name:'Linear Feedback Shift Register'},
-  {id:'digits10.v', name:'Digits'},
+  {id:'digits10.v', name:'Bitmapped Digits'},
+  {id:'7segment.v', name:'7-Segment Decoder'},
   {id:'ball_slip_counter.v', name:'Ball Motion (slipping counter)'},
   {id:'ball_paddle.v', name:'Brick Smash Game'},
   {id:'sprite_bitmap.v', name:'Sprite Bitmaps'},
   {id:'sprite_renderer.v', name:'Sprite Rendering'},
   {id:'sprite_multiple.v', name:'Multiple Sprites'},
+  {id:'sprite_rotation.v', name:'Sprite Rotation'},
+  {id:'ram1.v', name:'RAM Text Display'},
+  {id:'tank.v', name:'Tank Game'},
   {id:'cpu8.v', name:'Simple 8-Bit CPU'},
 ];
 
@@ -568,7 +572,7 @@ var VerilogPlatform = function(mainElement, options) {
   this.runToVsync = function() {
     var self = this;
     this.setDebugCondition(function() {
-      if (gen.vsync && gen.ticks() > debugTargetClock+1000) {
+      if (gen.vsync && gen.ticks() > debugTargetClock+2000) {
         self.breakpointHit(gen.ticks());
         return true;
       }

src/worker/workermain.js

@@ -1114,6 +1114,7 @@ function compileYosys(code, platform, options) {
     return {errors:errors};
   }
   endtime("compile");
+  //TODO: filename in errors
   if (errors.length) return {errors:errors};
   try {
     var json_file = FS.readFile(topmod+".json", {encoding:'utf8'});

tools/parsebdf3x5.py

@@ -60,10 +60,13 @@ def tohex(v):
     return '%02x'%v
 def tohex2(v):
     return '0x%02x'%v
+def tobin(v):
+    return "bitarray[0][0]=3'b{0:3b};\n".format(v)
 
 print '\thex ' + string.join(map(tohex,output),'')
 print string.join(map(tohex2,output),',')
 print '\thex ' + string.join(map(tohex,outputlo),'')
 print '\thex ' + string.join(map(tohex,outputhi),'')
+print string.join(map(tobin,output),'')
 
 print len(output),len(outputlo),len(outputhi)

tools/parsebdf8.py

@@ -17,6 +17,7 @@ outfmtgroup.add_argument("-A", "--asmhex", action="store_true", help="DASM-compa
 outfmtgroup.add_argument("-B", "--asmdb", action="store_true", help="Z80ASM-compatible hex")
 outfmtgroup.add_argument("-C", "--carray", action="store_true", help="Nested C array")
 outfmtgroup.add_argument("-F", "--flatcarray", action="store_true", help="Flat C array")
+outfmtgroup.add_argument("-V", "--verilog", action="store_true", help="Verilog-compatible hex")
 parser.add_argument('bdffile', help="BDF bitmap file")
 args = parser.parse_args()
 
@@ -98,5 +99,12 @@ for arr in [output]:
         print "static char FONT[%d] = {" % ((hichar-lochar+1) * height)
         print string.join(map(tohex2,arr),',')
         print "}";
-
+    if args.verilog:
-
+        j = 0
+        for i in range(0,len(output),height):
+            #print "rom["+str(j)+"] = 32'h" + string.join(map(tohex,arr[i:i+height/2]),'') + ";"
+            #j += 1
+            #print "rom["+str(j)+"] = 32'h" + string.join(map(tohex,arr[i+height/2:i+height]),'') + ";"
+            #j += 1
+            print "rom["+str(j)+"] = 64'h" + string.join(map(tohex,arr[i:i+height]),'') + ";"
+            j += 1