C02/doc/stddef.txt

Standard Definitions for C02 Library Functions

This module includes constant and function definitions common to the
entire standard library.

At the beginning of the program use the directives

  #include <stddef.h02>
  
The following constants are defined:

  #TRUE                 The byte 255, $FF, or %11111111, representing 
                        the true condition.

  #FALSE                The byte 0, $00 or %00000000, representing the 
                        false condition.

The following functions are defined:

  savreg();             Saves the A, X, and Y registers. 

                        Note: Stores A, X, and Y in temp0, temp1, and
                        temp2, respectively.

  savrxy();             Saves only the X and Y registers. 

                        Note: This is an alternate entry point into 
                        the savreg function, which stores X and Y in 
                        temp1 and temp2, respectively.

  resreg();             Restore the A, X, and Y registers. 

                        Note: Loads A, X, and Y from temp0, temp1, and
                        temp2, respectively.

  resrxy();             Resrtores only the X and Y registers. 

                        Note: This is an alternate entry point into 
                        the resreg function, which loads X and Y from 
                        temp1 and temp2, respectively.

  setsrc(&d);           Sets the source pointer to address d. 

                        Note: Stores the least significant byte, 
                        passed in the X register, in srclo, and the 
                        most significant byte, passed in the Y 
                        register, to srchi.

  setdst(&d);           Sets the destination pointer to address d. 

                        Note: Stores the least significant byte, 
                        passed in the X register, in destlo, and the 
                        most significant byte, passed in the Y 
                        register, to desthi.

  setdss();             Sets the destination pointer to the source 
                        pointer.

                        Note: Calls the getsrc function, followed by
                        the setdst function, copying srclo and srchi
                        to dstlo and dsthi, respectively.

  setsrd();             Sets the source pointer to the destination 
                        pointer.

                        Note: Calls the getdst function, followed by
                        the setsrc function, copying dstlo and dsthi
                        to srclo and srchi, respectively.

  *,hi,lo=getsrc();     Gets the address in the source pointer,
                        returning the least significant byte in lo
                        and the most significant byte in hi.

                        Note: Loads the srclo into the X register and 
                        srchi into the Y. 

  *,hi,lo=getdst();     Gets the address in the destination pointer,
                        returning the least significant byte in lo
                        and the most significant byte in hi.

                        Note: Loads the dstlo into the X register and 
                        dsthi into the Y. 

  savsrc();             Saves the destination pointer. 

                        Note: Calls the getsrc function, followed by
                        the savrxy function, copying srclo and srchi
                        to temp1 and temp2, respectively.

  savdst();             Saves the destination pointer. 

                        Note: Calls the getdst function, followed by
                        the savrxy function, copying dstlo and dsthi
                        to temp1 and temp2, respectively.

  ressrc();             Restores the source pointer. 

                        Note: Calls the resrxy function, followed by
                        the setsrc function, copying temp1 and temp2
                        to srclo and srchi, respectively.

  resdst();             Restores the destination pointer. 

                        Note: Calls the resrxy function, followed by
                        the setdst function, copying temp1 and temp2
                        to dstlo and dsthi, respectively.

Note: This library expects the following to be defined:

the zero page variables

  srclo,srchi:        Source pointer
  dstlo,dsthi:        Destination pointer

and the transient variables
  
  temp0               Temporary storage
  temp1
  temp2