mirror of
https://github.com/RevCurtisP/C02.git
synced 2024-11-24 15:31:17 +00:00
143 lines
6.6 KiB
Plaintext
143 lines
6.6 KiB
Plaintext
Extended Input/Output Functions for C02 Programs
|
|
|
|
At the beginning of the program use the directives
|
|
|
|
#include <stddef.h02>
|
|
#include <stdlib.h02>
|
|
#include <stdiox.h02>
|
|
|
|
The following functions are defined:
|
|
|
|
c = getprc(&s); Writes the string s, waits for a key to be pressed.
|
|
then writes blank line
|
|
|
|
Returns the ASCII value of the key that was
|
|
pressed.
|
|
|
|
Note: Calls the puts function, the newlin
|
|
function twice, then the getc function.
|
|
|
|
c = anykey(); Writes the string "Press any key to continue...",
|
|
followed by a blank line, to the screen, then waits
|
|
for a key to be pressed.
|
|
|
|
Returns the ASCII value of the key that was
|
|
pressed.
|
|
|
|
Note: Calls the getprc function, with a hard
|
|
coded string.
|
|
|
|
putspc(b); Writes a space character to the screen.
|
|
|
|
Note: Used by the putdel and putder functions.
|
|
|
|
putdec(b); Writes the decimal representation of byte b to the
|
|
screen. The output will be between one and three
|
|
digits with no leading spaces.
|
|
|
|
Note: Calls part of the ctoa routine from stdlib
|
|
which leaves the binary values of the ones, tens,
|
|
and hundreds digits in variables temp0, temp1, and
|
|
temp2, respectively.
|
|
|
|
putdel(b); Writes the decimal representation of byte b to the
|
|
screen. The output is left justified by appending it
|
|
with 1 space if b is between 10 and 99, or two spaces
|
|
if b is less than 10.
|
|
|
|
Note: Calls putdec and putspc. Leaves the value
|
|
of b in varible temp3.
|
|
|
|
putder(b); Writes the decimal representation of byte b to the
|
|
screen. The output is right justified by prepending it
|
|
with 1 space if b is between 10 and 99, or two spaces
|
|
if b is less than 10.
|
|
|
|
Note: Calls putdec and putspc. Leaves the value
|
|
of b in varible temp3.
|
|
|
|
puthex(b); Writes the hexadecimal representation of byte b to the
|
|
screen. The output is always two hex digits, the first
|
|
being a leading 0 if b is less than 16.
|
|
|
|
Note: Aliased to the prbyte routine.
|
|
|
|
putwrd(&d); Writes the hexadecimal representation of address &d to
|
|
the screen. The output is always four hex digits, with
|
|
leading zeros if b is less than $1000.
|
|
|
|
Note: Calls savrxy, saving the X and Y registers to
|
|
temp1 and temp2, respectively, then calls puthex, once
|
|
for the most significant byte and again for the least
|
|
significant byte.
|
|
|
|
putdst(); Prints the destination string set by the setdst or
|
|
setstr functions.
|
|
|
|
This can be used to print the results of any function
|
|
call that stores it's result in the destination string,
|
|
such as strcat, strcpy, and strcut in string,
|
|
|
|
Note: calls putc and is called by printf when
|
|
processing a %S formatting tag.
|
|
|
|
r = printf(b, &s): Writes the value of byte b to screen, formatting
|
|
the output according the contents of string s.
|
|
|
|
The output consists of the characters in s, but with
|
|
any formatting tags replaced with an ASCII
|
|
representation of the value of b.
|
|
|
|
The recognized formatting tags are:
|
|
%C - output the ASCII character represented by b
|
|
%D - output b as a an unjustified decimal number
|
|
%H - output b as a two-digit hexadecimal number
|
|
%L - output b as a left justified decimal number
|
|
%R - output b as a right justified decimal number
|
|
%% - output a single % character
|
|
|
|
Unlike the printf function in standard C, only
|
|
one value argument may be passed and that value is
|
|
used for each formatting tag in the format string.
|
|
|
|
Two additional formatting tag are supported:
|
|
%S - output the destination string
|
|
%W - output the destination address as a
|
|
as a four-digit hexadecimal number
|
|
|
|
The destination string and/or address is set using
|
|
the setdst or strdst function (from the "string"
|
|
library) before calling printf. Multiple occurances
|
|
of the %S or %w tag will cause the destination string
|
|
and/or address to be repeated.
|
|
|
|
When tag types are mixed, the %S and/or %W tags will
|
|
output the destination string and/or address, while
|
|
the other tags will output the formatted byte. If
|
|
only the %S and/or %W tags are used, then the byte
|
|
argument may be excluded from the call.
|
|
|
|
The letter in the formatting tag may be upper or
|
|
lower case with either a 0 or 1 in the high bit.
|
|
Unrecognized formatting tags are interpreted as %C.
|
|
|
|
Note: Calls putdec, putdel, putder, puthex, putwrd,
|
|
or putdst depending on which formatting tags are
|
|
used. The value of b is left in variable temp3.
|
|
|
|
Note: This library expects the following functions to be defined:
|
|
|
|
cubcd(); Convert byte to BCD and unpack into three bytes
|
|
prbyte(); Print byte to screen as hexadecimal number
|
|
prchr(c); Print ASCII character to screen
|
|
savrxy(); Save X and Y registers.
|
|
setsrc(&s); Set source string pointer and initialize index
|
|
|
|
along with the zero page variable pairs:
|
|
|
|
srclo,srchi: Source string pointer
|
|
|
|
and the temporary variables
|
|
|
|
temp0,temp1,temp2,temp3
|