mirror of
https://github.com/RevCurtisP/C02.git
synced 2024-11-25 21:33:44 +00:00
143 lines
5.8 KiB
Plaintext
143 lines
5.8 KiB
Plaintext
Sta Functions
|
|
|
|
This module contains functions to access and manipulate a stack structure.
|
|
The entries on a stack are stored in contiguous bytes of memory.
|
|
|
|
Each element of the stack can vary in size from 1 to 255 bytes. Both
|
|
arrays and strings may be pushed onto and pulled off the stack.
|
|
|
|
Usage: at the beginning of the program use the directives
|
|
|
|
#include <stddef.h02>
|
|
#include <memory.h02>
|
|
#include <stack.h02>
|
|
|
|
The following application functions are defined:
|
|
|
|
stkbgn(&b); Stack Begin: Sets the beginning of the stack
|
|
to address b.
|
|
|
|
The beginning of a stack is the first byte
|
|
of memory in the stack space.
|
|
|
|
Although stack space usually begins on a 256
|
|
byte boundary, this is not required.
|
|
|
|
Note: Sets variables stkslo and stkshi.
|
|
|
|
stkend(&e); Stack End: Sets the end of the stack to address
|
|
e. The end of a stack is the byte after the last
|
|
byte of memory in the stack space.
|
|
|
|
Although stack space usually ends on a 256
|
|
byte boundary, this is not required.
|
|
|
|
Note: Sets variables stkelo and steshi.
|
|
|
|
stkrst(); Stack Reset: Set stack pointer to stack begin
|
|
address.
|
|
|
|
This routine is called before populating a
|
|
stack with calls to the stkpsh function.
|
|
|
|
r = stkpsh(n ,&m); Stack Push: Creates a new entry at the end of
|
|
the stack consisting of n bytes of array m.
|
|
|
|
If n is 0 or the new entry would overflow the
|
|
end of the stack space, no entry is created and
|
|
a value of 0 is returned. Otherwise, the number
|
|
of bytes in the new entry is returned.
|
|
|
|
Note: Sets dstlo and dsthi to stkslo and stkhi
|
|
prior to the copy, updates stkslo and stkshi,
|
|
then calls the memcpy function.
|
|
|
|
r = stkpop(&m); Stack Pop: Copies the bytes from the last entry of
|
|
the stack into array m and removes the entry from
|
|
the stack.
|
|
|
|
If the stack is empty, the value 0 is returned.
|
|
Otherwise, the number of bytes in the popped entry
|
|
is returned.
|
|
|
|
Note: Sets dstlo and dsthi to the address of m,
|
|
updates stklo and stkhi to point to the beginning
|
|
of the last entry, sets srclo and srchi to stklo
|
|
and stkhi, then calls the memcpy function.
|
|
|
|
r,m,l = stksiz(); Stack Size: Calculates and returns the current size
|
|
of the stack along with a flag indicating whether
|
|
the stack is populated or empty.
|
|
|
|
The first byte returned will be 255 (True) if the
|
|
stack contains at least one entry, or 0 (False) if
|
|
the stack is empty. The second and third returned
|
|
bytes are the size of the stack as a sixteen bit
|
|
number, most-significant and least-significant byte,
|
|
respectively.
|
|
|
|
Note: Subtracts the sixteen bit value contained in
|
|
stkslo and stkhi from the value in stklo and stkhi.
|
|
|
|
The following utility functions are not normally used in applications:
|
|
|
|
*,m,l = stkptr(); Stack Pointer: Returns the address contained in
|
|
the stack pointer as the most significant byte
|
|
and the least significant byte.
|
|
|
|
Note: Reads variables stklo and stkhi.
|
|
|
|
stkset(&d); Stack Set: Sets stack pointer to address d.
|
|
|
|
Note: Sets variables stklo and stshi.
|
|
|
|
stkadd(b); Stack Add: Increases the stack pointer by b.
|
|
|
|
Note: Updates variables stklo and stshi.
|
|
|
|
stksub(b); Stack Subtract: Decreases the stack pointer by b.
|
|
|
|
Note: Updates variables stslo and stshi.
|
|
|
|
stkinc(b); Stack Increment: Increases the stack pointer by 1.
|
|
|
|
Note: Updates variables stklo and stshi.
|
|
|
|
stkdec(b); Stack Decrement: Secreases the stack pointer by 1.
|
|
|
|
Note: Updates variables stslo and stshi.
|
|
|
|
stkssp(); Save Stack Pointer: Copies contents of the stack
|
|
pointer to variables temp1 and temp2.
|
|
|
|
Note: Calls stkptr() then savrxy().
|
|
|
|
stkrsp(); Restore Stack Pointer: Copies contents of variables
|
|
temp1 and temp2 to the stack pointer.
|
|
|
|
Note: Calls resrxy() then stkset().
|
|
|
|
Note: This module expects the following functions to be defined
|
|
|
|
memcpl Copy memory (alternate entry point)
|
|
ressrc Restore source pointer
|
|
resrxy Restore X and Y registers
|
|
savrxy Save X and Y registers
|
|
setdst Set destination pointer
|
|
setsrc Set source pointer and initialize index
|
|
|
|
along with the zero page variable pairs
|
|
|
|
srclo, srchi Source String Pointer
|
|
dstlo, dsthi Destination String Pointer
|
|
stklo, stkhi stack Pointer
|
|
|
|
the static variables
|
|
|
|
stkslo, stkshi Stack Start Address
|
|
stkelo, stkehi Stack End Address
|
|
|
|
and the transient variables
|
|
|
|
temp0, temp1, temp2 Temporary storage
|