CLK/Machines/Apple/AppleIIgs/ADB.cpp

//
//  ADB.cpp
//  Clock Signal
//
//  Created by Thomas Harte on 31/10/2020.
//  Copyright © 2020 Thomas Harte. All rights reserved.
//

#include "ADB.hpp"

#include <cassert>
#include <cstdio>
#include <iostream>

// TEST.
#include "../../../InstructionSets/M50740/Parser.hpp"
#include "../../../InstructionSets/Disassembler.hpp"

#define LOG_PREFIX "[ADB GLU] "
#include "../../../Outputs/Log.hpp"

using namespace Apple::IIgs::ADB;

namespace {

// Flags affecting the CPU-visible status register.
enum class CPUFlags: uint8_t {
	MouseDataFull = 0x80,
	MouseInterruptEnabled = 0x40,
	CommandDataIsValid = 0x20,
	CommandDataInterruptEnabled = 0x10,
	KeyboardDataFull = 0x08,
	KeyboardDataInterruptEnabled = 0x04,
	MouseXIsAvailable = 0x02,
	CommandRegisterFull = 0x01,
};

// Flags affecting the microcontroller-visible register.
enum class MicrocontrollerFlags: uint8_t {
	CommandRegisterFull = 0x40,
};

}

GLU::GLU() :
	executor_(*this),
	bus_(HalfCycles(1'789'772)),
	controller_id_(bus_.add_device()),
	mouse_(bus_),
	keyboard_(bus_) {}

// MARK: - External interface.

uint8_t GLU::get_keyboard_data() {
	// The classic Apple II serial keyboard register:
	// b7:		key strobe.
	// b6–b0:	ASCII code.
	return (registers_[0] & 0x7f) | ((status_ & uint8_t(CPUFlags::KeyboardDataFull)) ? 0x80 : 0x00);
}

void GLU::clear_key_strobe() {
	// Clears the key strobe of the classic Apple II serial keyboard register.
	status_ &= ~uint8_t(CPUFlags::KeyboardDataFull);
}

uint8_t GLU::get_any_key_down() {
	// The Apple IIe check-for-any-key-down bit.
	return registers_[5];
}

uint8_t GLU::get_mouse_data() {
	// Alternates between returning x and y values.
	//
	// b7: 		1 = button is up; 0 = button is down.
	// b6:		delta sign bit; 1 = negative.
	// b5–b0:	mouse delta.

	const uint8_t result = registers_[visible_mouse_register_];
	if(visible_mouse_register_ == 2) {
		++visible_mouse_register_;
	} else {
		status_ &= ~uint8_t(CPUFlags::MouseDataFull);
	}
	return result;
}

uint8_t GLU::get_modifier_status() {
	// b7:		1 = command key pressed; 0 = not.
	// b6:		option key.
	// b5:		1 = modifier key latch has been updated, no key has been pressed; 0 = not.
	// b4:		any numeric keypad key.
	// b3:		a key is down.
	// b2:		caps lock is pressed.
	// b1:		control key.
	// b0:		shift key.
	return registers_[6];
}

uint8_t GLU::get_data() {
	// b0–2:	number of data bytes to be returned.
	// b3:		1 = a valid service request is pending; 0 = no request pending.
	// b4:		1 = control, command and delete keys have been pressed simultaneously; 0 = they haven't.
	// b5:		1 = control, command and reset have all been pressed together; 0 = they haven't.
	// b6:		1 = ADB controller encountered an error and reset itself; 0 = no error.
	// b7:		1 = ADB has received a response from the addressed ADB device; 0 = no respone.
	status_ &= ~uint8_t(CPUFlags::CommandDataIsValid);
	return registers_[7];
}

uint8_t GLU::get_status() {
	// b7:	1 = mouse data register is full; 0 = empty.
	// b6:	1 = mouse interrupt is enabled.
	// b5:	1 = command/data has valid data.
	// b4:	1 = command/data interrupt is enabled.
	// b3:	1 = keyboard data is full.
	// b2:	1 = keyboard data interrupt is enabled.
	// b1:	1 = mouse x-data is available; 0 = y.
	// b0:	1 = command register is full (set when command is written); 0 = empty (cleared when data is read).
	return status_ | ((visible_mouse_register_ == 2) ? uint8_t(CPUFlags::MouseXIsAvailable) : 0);
}

void GLU::set_status(uint8_t status) {
	// This permits only the interrupt flags to be set.
	constexpr uint8_t interrupt_flags =
		uint8_t(CPUFlags::MouseInterruptEnabled) |
		uint8_t(CPUFlags::CommandDataInterruptEnabled) |
		uint8_t(CPUFlags::KeyboardDataInterruptEnabled);
	status_ = (status_ & ~interrupt_flags) | (status & interrupt_flags);
}

void GLU::set_command(uint8_t command) {
	registers_[1] = command;
	registers_[4] |= uint8_t(MicrocontrollerFlags::CommandRegisterFull);
	status_ |= uint8_t(CPUFlags::CommandRegisterFull);
}

// MARK: - Setup and run.

void GLU::set_microcontroller_rom(const std::vector<uint8_t> &rom) {
	executor_.set_rom(rom);

	// TEST invocation.
/*	InstructionSet::Disassembler<InstructionSet::M50740::Parser, 0x1fff, InstructionSet::M50740::Instruction, uint8_t, uint16_t> disassembler;
	disassembler.disassemble(rom.data(), 0x1000, uint16_t(rom.size()), 0x1000);

	const auto instructions = disassembler.instructions();
	const auto entry_points = disassembler.entry_points();
	for(const auto &pair : instructions) {
		std::cout << std::hex << pair.first << "\t\t";
		if(entry_points.find(pair.first) != entry_points.end()) {
			std::cout << "L" << pair.first << "\t";
		} else {
			std::cout << "\t\t";
		}
		std::cout << operation_name(pair.second.operation) << " ";
		std::cout << address(pair.second.addressing_mode, &rom[pair.first - 0x1000], pair.first);

		std::cout << std::endl;
	}*/
}

void GLU::run_for(Cycles cycles) {
	executor_.run_for(cycles);
}

// MARK: - M50470 port handler

void GLU::set_port_output(int port, uint8_t value) {
	switch(port) {
		case 0:
			register_latch_ = value;
		break;
		case 1:
//			printf("Keyboard write: %02x???\n", value);
		break;
		case 2: {
//			printf("ADB data line input: %d???\n", value >> 7);
//			printf("IIe keyboard reset line: %d\n", (value >> 6)&1);
//			printf("IIgs reset line: %d\n", (value >> 5)&1);
//			printf("GLU strobe: %d\n", (value >> 4)&1);
//			printf("Select GLU register: %d [%02x]\n", value & 0xf, value);

			register_address_ = value & 0xf;

			// This is an ugly hack, I think. Per Neil Parker's Inside the Apple IIGS ADB Controller
			// http://nparker.llx.com/a2/adb.html#external:
			//
			// The protocol for reading an ADB GLU register is as follows:
			//
			// 1. Put the register number of the ADB GLU register in port P2 bits 0-3.
			// 2. Clear bit 4 of port P2, read the data from P0, and set bit 4 of P0.
			//
			// The protocol for writing a GLU register is similar:
			//
			// 1. Write the register number to port P2 bits 0-3.
			// 2. Write the data to port P0.
			// 3. Configure port P0 for output by writing $FF to $E1.
			// 4. Clear bit 4 of P2, and immediately set it again.
			// 5. Configure port P0 for input by writing 0 to $E1.
			//
			// ---
			//
			// I tried: linking a read or write to rising or falling edges of the strobe.
			// Including with hysteresis as per the "immediately" (which, in practice, seems
			// to mean "in the very next instruction", i.e. 5 cycles later). That didn't seem
			// properly to differentiate.
			//
			// So I'm focussing on the "configure port P0 for output" bit. Which I don't see
			// would be visible here unless it is actually an exposed signal, which is unlikely.
			//
			// Ergo: ugly. HACK.
			const bool strobe = value & 0x10;
			if(strobe != register_strobe_) {
				register_strobe_ = strobe;

				if(!register_strobe_) {
					if(executor_.get_output_mask(0)) {
						registers_[register_address_] = register_latch_;
						switch(register_address_) {
							default: break;
							case 0:		status_ |= uint8_t(CPUFlags::KeyboardDataFull);		break;
							case 2:
							case 3:
								status_ |= uint8_t(CPUFlags::MouseDataFull);
								visible_mouse_register_ = 2;
								printf("Mouse: %d <- %02x\n", register_address_, register_latch_);
							break;
							case 7:		status_ |= uint8_t(CPUFlags::CommandDataIsValid);	break;
						}
					} else {
						register_latch_ = registers_[register_address_];
						switch(register_address_) {
							default: break;
							case 1:
								registers_[4] &= ~uint8_t(MicrocontrollerFlags::CommandRegisterFull);
								status_ &= ~uint8_t(CPUFlags::CommandRegisterFull);
							break;
						}
					}
				}
			}
		} break;
		case 3:
			if(modifier_state_ != (value & 0x30)) {
				modifier_state_ = value & 0x30;
				LOG("Modifier state: " << int(value & 0x30));
			}

			// Output is inverted respective to input; the microcontroller
			// sets a value of '1' in order to pull the ADB bus low.
			bus_.set_device_output(controller_id_, !(value & 0x08));
		break;

		default: assert(false);
	}
}

bool GLU::get_command_button() const {
	return modifier_state_ & 0x20;
}

bool GLU::get_option_button() const {
	return modifier_state_ & 0x10;
}

uint8_t GLU::get_port_input(int port) {
	switch(port) {
		case 0:	return register_latch_;
		case 1:
//			printf("IIe keyboard read\n");
		return 0x06;
		case 2:
//			printf("ADB data line input, etc\n");
		return bus_.get_state() ? 0x80 : 0x00;
		case 3:
//			printf("ADB data line output, etc\n");
		return 0x00;

		default: assert(false);
	}
	return 0xff;
}

void GLU::run_ports_for(Cycles cycles) {
	bus_.run_for(cycles);
}

void GLU::set_vertical_blank(bool is_blank) {
	executor_.set_interrupt_line(is_blank);
}