1
0
mirror of https://github.com/TomHarte/CLK.git synced 2024-11-30 04:50:08 +00:00
CLK/Components/6560/6560.hpp

474 lines
15 KiB
C++
Raw Normal View History

//
// 6560.hpp
// Clock Signal
//
// Created by Thomas Harte on 05/06/2016.
// Copyright © 2016 Thomas Harte. All rights reserved.
//
#ifndef _560_hpp
#define _560_hpp
#include "../../Outputs/CRT/CRT.hpp"
#include "../../Outputs/Speaker.hpp"
#include "../../ClockReceiver/ClockReceiver.hpp"
namespace MOS {
// audio state
class Speaker: public ::Outputs::Filter<Speaker> {
public:
Speaker();
void set_volume(uint8_t volume);
void set_control(int channel, uint8_t value);
void get_samples(unsigned int number_of_samples, int16_t *target);
void skip_samples(unsigned int number_of_samples);
private:
unsigned int counters_[4];
unsigned int shift_registers_[4];
uint8_t control_registers_[4];
uint8_t volume_;
};
/*!
The 6560 Video Interface Chip ('VIC') is a video and audio output chip; it therefore vends both a @c CRT and a @c Speaker.
To run the VIC for a cycle, the caller should call @c get_address, make the requested bus access
and call @c set_graphics_value with the result.
@c set_register and @c get_register provide register access.
*/
template <class T> class MOS6560 {
public:
MOS6560() :
crt_(new Outputs::CRT::CRT(65*4, 4, Outputs::CRT::NTSC60, 2)),
2017-03-26 18:34:47 +00:00
speaker_(new Speaker),
horizontal_counter_(0),
vertical_counter_(0),
cycles_since_speaker_update_(0),
is_odd_frame_(false),
is_odd_line_(false) {
crt_->set_composite_sampling_function(
"float composite_sample(usampler2D texID, vec2 coordinate, vec2 iCoordinate, float phase, float amplitude)"
"{"
"vec2 yc = texture(texID, coordinate).rg / vec2(255.0);"
"float phaseOffset = 6.283185308 * 2.0 * yc.y;"
"float chroma = cos(phase + phaseOffset);"
2017-05-14 02:01:02 +00:00
"return mix(yc.x, step(yc.y, 0.75) * chroma, amplitude);"
"}");
// default to NTSC
set_output_mode(OutputMode::NTSC);
}
2017-03-26 18:34:47 +00:00
void set_clock_rate(double clock_rate) {
speaker_->set_input_rate((float)(clock_rate / 4.0));
}
std::shared_ptr<Outputs::CRT::CRT> get_crt() { return crt_; }
std::shared_ptr<Outputs::Speaker> get_speaker() { return speaker_; }
enum OutputMode {
PAL, NTSC
};
/*!
Sets the output mode to either PAL or NTSC.
*/
2017-03-26 18:34:47 +00:00
void set_output_mode(OutputMode output_mode) {
output_mode_ = output_mode;
2017-05-13 18:29:36 +00:00
// Lumunances are encoded trivially: on a 0255 scale.
const uint8_t luminances[16] = {
0, 255, 109, 189,
199, 144, 159, 161,
126, 227, 227, 207,
235, 173, 188, 196
};
2017-05-13 18:29:36 +00:00
// Chrominances are encoded such that 0128 is a complete revolution of phase;
// anything above 191 disables the colour subcarrier. Phase is relative to the
// colour burst, so 0 is green.
const uint8_t pal_chrominances[16] = {
255, 255, 40, 112,
2017-05-14 02:01:02 +00:00
8, 88, 120, 56,
40, 48, 40, 112,
2017-05-14 02:01:02 +00:00
8, 88, 120, 56,
};
const uint8_t ntsc_chrominances[16] = {
255, 255, 8, 72,
32, 88, 48, 112,
0, 0, 8, 72,
32, 88, 48, 112,
};
const uint8_t *chrominances;
Outputs::CRT::DisplayType display_type;
2017-03-26 18:34:47 +00:00
switch(output_mode) {
case OutputMode::PAL:
chrominances = pal_chrominances;
display_type = Outputs::CRT::PAL50;
timing_.cycles_per_line = 71;
timing_.line_counter_increment_offset = 0;
timing_.lines_per_progressive_field = 312;
timing_.supports_interlacing = false;
break;
case OutputMode::NTSC:
chrominances = ntsc_chrominances;
display_type = Outputs::CRT::NTSC60;
timing_.cycles_per_line = 65;
timing_.line_counter_increment_offset = 65 - 33; // TODO: this is a bit of a hack; separate vertical and horizontal counting
timing_.lines_per_progressive_field = 261;
timing_.supports_interlacing = true;
break;
}
crt_->set_new_display_type((unsigned int)(timing_.cycles_per_line*4), display_type);
crt_->set_visible_area(Outputs::CRT::Rect(0.05f, 0.05f, 0.9f, 0.9f));
2017-03-26 18:34:47 +00:00
// switch(output_mode) {
// case OutputMode::PAL:
// crt_->set_visible_area(crt_->get_rect_for_area(16, 237, 15*4, 55*4, 4.0f / 3.0f));
// break;
// case OutputMode::NTSC:
// crt_->set_visible_area(crt_->get_rect_for_area(16, 237, 11*4, 55*4, 4.0f / 3.0f));
// break;
// }
2017-03-26 18:34:47 +00:00
for(int c = 0; c < 16; c++) {
uint8_t *colour = (uint8_t *)&colours_[c];
colour[0] = luminances[c];
2017-05-13 18:29:36 +00:00
colour[1] = chrominances[c];
}
}
/*!
Runs for cycles. Derr.
*/
inline void run_for(const Cycles cycles) {
// keep track of the amount of time since the speaker was updated; lazy updates are applied
cycles_since_speaker_update_ += cycles;
int number_of_cycles = cycles.as_int();
2017-03-26 18:34:47 +00:00
while(number_of_cycles--) {
// keep an old copy of the vertical count because that test is a cycle later than the actual changes
int previous_vertical_counter = vertical_counter_;
// keep track of internal time relative to this scanline
horizontal_counter_++;
full_frame_counter_++;
2017-03-26 18:34:47 +00:00
if(horizontal_counter_ == timing_.cycles_per_line) {
if(horizontal_drawing_latch_) {
current_character_row_++;
if(
(current_character_row_ == 16) ||
(current_character_row_ == 8 && !registers_.tall_characters)
) {
current_character_row_ = 0;
current_row_++;
}
pixel_line_cycle_ = -1;
columns_this_line_ = -1;
column_counter_ = -1;
}
horizontal_counter_ = 0;
if(output_mode_ == OutputMode::PAL) is_odd_line_ ^= true;
horizontal_drawing_latch_ = false;
vertical_counter_ ++;
2017-03-26 18:34:47 +00:00
if(vertical_counter_ == (registers_.interlaced ? (is_odd_frame_ ? 262 : 263) : timing_.lines_per_progressive_field)) {
vertical_counter_ = 0;
full_frame_counter_ = 0;
if(output_mode_ == OutputMode::NTSC) is_odd_frame_ ^= true;
current_row_ = 0;
rows_this_field_ = -1;
vertical_drawing_latch_ = false;
base_video_matrix_address_counter_ = 0;
current_character_row_ = 0;
}
}
// check for vertical starting events
vertical_drawing_latch_ |= registers_.first_row_location == (previous_vertical_counter >> 1);
horizontal_drawing_latch_ |= vertical_drawing_latch_ && (horizontal_counter_ == registers_.first_column_location);
if(pixel_line_cycle_ >= 0) pixel_line_cycle_++;
2017-03-26 18:34:47 +00:00
switch(pixel_line_cycle_) {
case -1:
2017-03-26 18:34:47 +00:00
if(horizontal_drawing_latch_) {
pixel_line_cycle_ = 0;
video_matrix_address_counter_ = base_video_matrix_address_counter_;
}
break;
case 1: columns_this_line_ = registers_.number_of_columns; break;
case 2: if(rows_this_field_ < 0) rows_this_field_ = registers_.number_of_rows; break;
case 3: if(current_row_ < rows_this_field_) column_counter_ = 0; break;
}
uint16_t fetch_address = 0x1c;
2017-03-26 18:34:47 +00:00
if(column_counter_ >= 0 && column_counter_ < columns_this_line_*2) {
if(column_counter_&1) {
fetch_address = registers_.character_cell_start_address + (character_code_*(registers_.tall_characters ? 16 : 8)) + current_character_row_;
2017-03-26 18:34:47 +00:00
} else {
fetch_address = (uint16_t)(registers_.video_matrix_start_address + video_matrix_address_counter_);
video_matrix_address_counter_++;
if(
(current_character_row_ == 15) ||
(current_character_row_ == 7 && !registers_.tall_characters)
) {
base_video_matrix_address_counter_ = video_matrix_address_counter_;
}
}
}
fetch_address &= 0x3fff;
uint8_t pixel_data;
uint8_t colour_data;
static_cast<T *>(this)->perform_read(fetch_address, &pixel_data, &colour_data);
// TODO: there should be a further two-cycle delay on pixels being output; the reverse bit should
// divide the byte it is set for 3:1 and then continue as usual.
// determine output state; colour burst and sync timing are currently a guess
if(horizontal_counter_ > timing_.cycles_per_line-4) this_state_ = State::ColourBurst;
else if(horizontal_counter_ > timing_.cycles_per_line-7) this_state_ = State::Sync;
2017-03-26 18:34:47 +00:00
else {
this_state_ = (column_counter_ >= 0 && column_counter_ < columns_this_line_*2) ? State::Pixels : State::Border;
}
// apply vertical sync
if(
(vertical_counter_ < 3 && (is_odd_frame_ || !registers_.interlaced)) ||
(registers_.interlaced &&
(
(vertical_counter_ == 0 && horizontal_counter_ > 32) ||
(vertical_counter_ == 1) || (vertical_counter_ == 2) ||
(vertical_counter_ == 3 && horizontal_counter_ <= 32)
)
))
this_state_ = State::Sync;
// update the CRT
2017-03-26 18:34:47 +00:00
if(this_state_ != output_state_) {
switch(output_state_) {
case State::Sync: crt_->output_sync(cycles_in_state_ * 4); break;
case State::ColourBurst: crt_->output_colour_burst(cycles_in_state_ * 4, (is_odd_frame_ || is_odd_line_) ? 128 : 0); break;
case State::Border: output_border(cycles_in_state_ * 4); break;
case State::Pixels: crt_->output_data(cycles_in_state_ * 4, 1); break;
}
output_state_ = this_state_;
cycles_in_state_ = 0;
pixel_pointer = nullptr;
2017-03-26 18:34:47 +00:00
if(output_state_ == State::Pixels) {
pixel_pointer = (uint16_t *)crt_->allocate_write_area(260);
}
}
cycles_in_state_++;
2017-03-26 18:34:47 +00:00
if(this_state_ == State::Pixels) {
if(column_counter_&1) {
character_value_ = pixel_data;
2017-03-26 18:34:47 +00:00
if(pixel_pointer) {
uint16_t cell_colour = colours_[character_colour_ & 0x7];
2017-03-26 18:34:47 +00:00
if(!(character_colour_&0x8)) {
uint16_t colours[2];
2017-03-26 18:34:47 +00:00
if(registers_.invertedCells) {
colours[0] = cell_colour;
colours[1] = registers_.backgroundColour;
2017-03-26 18:34:47 +00:00
} else {
colours[0] = registers_.backgroundColour;
colours[1] = cell_colour;
}
pixel_pointer[0] = colours[(character_value_ >> 7)&1];
pixel_pointer[1] = colours[(character_value_ >> 6)&1];
pixel_pointer[2] = colours[(character_value_ >> 5)&1];
pixel_pointer[3] = colours[(character_value_ >> 4)&1];
pixel_pointer[4] = colours[(character_value_ >> 3)&1];
pixel_pointer[5] = colours[(character_value_ >> 2)&1];
pixel_pointer[6] = colours[(character_value_ >> 1)&1];
pixel_pointer[7] = colours[(character_value_ >> 0)&1];
2017-03-26 18:34:47 +00:00
} else {
uint16_t colours[4] = {registers_.backgroundColour, registers_.borderColour, cell_colour, registers_.auxiliary_colour};
pixel_pointer[0] =
pixel_pointer[1] = colours[(character_value_ >> 6)&3];
pixel_pointer[2] =
pixel_pointer[3] = colours[(character_value_ >> 4)&3];
pixel_pointer[4] =
pixel_pointer[5] = colours[(character_value_ >> 2)&3];
pixel_pointer[6] =
pixel_pointer[7] = colours[(character_value_ >> 0)&3];
}
2017-05-13 18:29:36 +00:00
pixel_pointer += 8;
}
2017-03-26 18:34:47 +00:00
} else {
character_code_ = pixel_data;
character_colour_ = colour_data;
}
column_counter_++;
}
}
}
/*!
Causes the 6560 to flush as much pending CRT and speaker communications as possible.
*/
inline void flush() { update_audio(); speaker_->flush(); }
/*!
Writes to a 6560 register.
*/
2017-03-26 18:34:47 +00:00
void set_register(int address, uint8_t value) {
address &= 0xf;
registers_.direct_values[address] = value;
2017-03-26 18:34:47 +00:00
switch(address) {
case 0x0:
registers_.interlaced = !!(value&0x80) && timing_.supports_interlacing;
registers_.first_column_location = value & 0x7f;
break;
case 0x1:
registers_.first_row_location = value;
break;
case 0x2:
registers_.number_of_columns = value & 0x7f;
registers_.video_matrix_start_address = (uint16_t)((registers_.video_matrix_start_address & 0x3c00) | ((value & 0x80) << 2));
break;
case 0x3:
registers_.number_of_rows = (value >> 1)&0x3f;
registers_.tall_characters = !!(value&0x01);
break;
case 0x5:
registers_.character_cell_start_address = (uint16_t)((value & 0x0f) << 10);
registers_.video_matrix_start_address = (uint16_t)((registers_.video_matrix_start_address & 0x0200) | ((value & 0xf0) << 6));
break;
case 0xa:
case 0xb:
case 0xc:
case 0xd:
update_audio();
speaker_->set_control(address - 0xa, value);
break;
case 0xe:
update_audio();
registers_.auxiliary_colour = colours_[value >> 4];
speaker_->set_volume(value & 0xf);
break;
2017-03-26 18:34:47 +00:00
case 0xf: {
uint16_t new_border_colour = colours_[value & 0x07];
2017-03-26 18:34:47 +00:00
if(this_state_ == State::Border && new_border_colour != registers_.borderColour) {
output_border(cycles_in_state_ * 4);
cycles_in_state_ = 0;
}
registers_.invertedCells = !((value >> 3)&1);
registers_.borderColour = new_border_colour;
registers_.backgroundColour = colours_[value >> 4];
}
break;
// TODO: the lightpen, etc
default:
break;
}
}
/*
Reads from a 6560 register.
*/
2017-03-26 18:34:47 +00:00
uint8_t get_register(int address) {
address &= 0xf;
int current_line = (full_frame_counter_ + timing_.line_counter_increment_offset) / timing_.cycles_per_line;
2017-03-26 18:34:47 +00:00
switch(address) {
default: return registers_.direct_values[address];
case 0x03: return (uint8_t)(current_line << 7) | (registers_.direct_values[3] & 0x7f);
case 0x04: return (current_line >> 1) & 0xff;
}
}
private:
std::shared_ptr<Outputs::CRT::CRT> crt_;
std::shared_ptr<Speaker> speaker_;
Cycles cycles_since_speaker_update_;
2017-03-26 18:34:47 +00:00
void update_audio() {
speaker_->run_for(Cycles(cycles_since_speaker_update_.divide(Cycles(4))));
}
// register state
struct {
bool interlaced, tall_characters;
uint8_t first_column_location, first_row_location;
uint8_t number_of_columns, number_of_rows;
uint16_t character_cell_start_address, video_matrix_start_address;
uint16_t backgroundColour, borderColour, auxiliary_colour;
bool invertedCells;
uint8_t direct_values[16];
} registers_;
// output state
enum State {
Sync, ColourBurst, Border, Pixels
} this_state_, output_state_;
unsigned int cycles_in_state_;
// counters that cover an entire field
int horizontal_counter_, vertical_counter_, full_frame_counter_;
// latches dictating start and length of drawing
bool vertical_drawing_latch_, horizontal_drawing_latch_;
int rows_this_field_, columns_this_line_;
// current drawing position counter
int pixel_line_cycle_, column_counter_;
int current_row_;
uint16_t current_character_row_;
uint16_t video_matrix_address_counter_, base_video_matrix_address_counter_;
// data latched from the bus
uint8_t character_code_, character_colour_, character_value_;
bool is_odd_frame_, is_odd_line_;
// lookup table from 6560 colour index to appropriate PAL/NTSC value
uint16_t colours_[16];
uint16_t *pixel_pointer;
2017-03-26 18:34:47 +00:00
void output_border(unsigned int number_of_cycles) {
uint16_t *colour_pointer = (uint16_t *)crt_->allocate_write_area(1);
if(colour_pointer) *colour_pointer = registers_.borderColour;
crt_->output_level(number_of_cycles);
}
struct {
int cycles_per_line;
int line_counter_increment_offset;
int lines_per_progressive_field;
bool supports_interlacing;
} timing_;
OutputMode output_mode_;
};
}
#endif /* _560_hpp */