Thomas Harte
|
d3257c345a
|
Tested against public ROMs and corrected. Also moved the deferred adjustment into a more canonical place.
|
2017-03-04 17:00:28 -05:00 |
|
Thomas Harte
|
e09b76bf32
|
Fixed 'same value, then immediate increment, then proper counting increments' behaviour and ensured it takes one cycle to commit a value. Adjusted tests to match.
|
2017-03-04 15:57:54 -05:00 |
|
Thomas Harte
|
ced644b103
|
It seems likely that an AY divides its clock by 8, not 16. I had conflated wave frequency and counter clock.
|
2017-01-11 22:03:01 -05:00 |
|
Thomas Harte
|
eca3995481
|
Added a CRC check for read address, ensured CRC, lost data and record not found are initially reset.
|
2017-01-01 21:00:25 -05:00 |
|
Thomas Harte
|
044c920a5b
|
Made it more explicit that there are no unhandled cases.
|
2017-01-01 20:56:52 -05:00 |
|
Thomas Harte
|
0df9ce5a76
|
Made an attempt at read address. So superficially that leaves only the force interrupts.
|
2017-01-01 20:55:09 -05:00 |
|
Thomas Harte
|
f94f34f053
|
Made an attempt at read track. Which means process_input_bit can't just swallow syncs any more; it now reports them as tokens of type ::Sync.
|
2017-01-01 20:39:19 -05:00 |
|
Thomas Harte
|
c994fa39f6
|
Ensured spin-up doesn't occur if there's no motor line.
|
2016-12-31 16:18:30 -05:00 |
|
Thomas Harte
|
1ea4f0d79d
|
Made an attempt to implement 'write track' and ensure that 'write sector' can't end without announcing that it has ended writing.
|
2016-12-31 16:01:44 -05:00 |
|
Thomas Harte
|
8eb21c6702
|
The "MFM...Byte"s aren't MFM-specific, they're relevant to both FM and MFM encoding. So renamed them. Also slimmed syntax within MFM.cpp mostly where emigration from the Acorn disk analyser had left a residue of lengthy namespace specification.
|
2016-12-31 15:25:11 -05:00 |
|
Thomas Harte
|
a8bc9d830e
|
Removed leftover very temporary debugging aid.
|
2016-12-28 23:03:05 -05:00 |
|
Thomas Harte
|
e4000bd060
|
Added some even more verbose logging; slightly simplified write loop logic, and decided it's definitely write_byte that's responsible for CRC generator feeding.
|
2016-12-28 21:24:19 -05:00 |
|
Thomas Harte
|
4adcb46665
|
Fixed FM-mode CRC generation.
|
2016-12-28 19:51:27 -05:00 |
|
Thomas Harte
|
1277a67f9a
|
Introduced data_mode_ to replace is_reading_data_, representing that there are now three possible modes. When writing, any input from the read head won't affect the CRC generator.
|
2016-12-28 19:26:21 -05:00 |
|
Thomas Harte
|
7a627b782d
|
Reintroduced writing of MFM sync marks when writing a sector.
|
2016-12-28 18:48:50 -05:00 |
|
Thomas Harte
|
a568172758
|
Made steps towards proper CRC generation. Am currently comparing against Oric disk images, as — amongst other things — they include precomputed CRCs.
|
2016-12-28 18:29:37 -05:00 |
|
Thomas Harte
|
9c0f622a2e
|
Started working CRC checking into the 1770. Discovered immediately that my generated CRC does not match that built into the Oric disk images. So mine is pretty-much certainly wrong. An opportunity for learning!
|
2016-12-26 16:46:26 -05:00 |
|
Thomas Harte
|
0490a47058
|
Worked on the all-around framework for decoding sectors back from tracks when closing down a file. Hit the wall that the parser is more observant of CRCs than the WD. No, really. So I guess I have to stop avoiding that whole issue.
|
2016-12-26 14:24:33 -05:00 |
|
Thomas Harte
|
83c433c142
|
Deviated from the data sheet, which seems likely to be correct. Hence removed a whole load of the temporary logging.
|
2016-12-26 12:48:49 -05:00 |
|
Thomas Harte
|
742c5df367
|
With lots of logging arising temporarily, fixed bug whereby conversion to a patched track would lead to holding a track with a distinct measure of time, leading to improperly-placed patches.
|
2016-12-25 22:00:39 -05:00 |
|
Thomas Harte
|
acc35885cd
|
Attempted to reduce track invalidations.
|
2016-12-25 20:38:25 -05:00 |
|
Thomas Harte
|
c0a1264ab0
|
Slightly improved legibility.
|
2016-12-25 20:19:47 -05:00 |
|
Thomas Harte
|
e2b829f68e
|
Made an attempt to write the proper address mark.
|
2016-12-25 20:15:07 -05:00 |
|
Thomas Harte
|
beaa868079
|
Factored the MFM parser out into encodings.
|
2016-12-25 20:00:57 -05:00 |
|
Thomas Harte
|
74e98fd097
|
Made an attempt to write actual data (albeit that CRC calculation is still missing).
|
2016-12-25 19:18:45 -05:00 |
|
Thomas Harte
|
98be6ede45
|
Shuffled a little to reduce risk of overflow, ensured writing is a loop, still seem to be writing too quickly for some reason.
|
2016-12-25 16:13:05 -05:00 |
|
Thomas Harte
|
d2ad2c756e
|
Added enough shovelling to write rubbish for an entire sector.
|
2016-12-25 15:46:49 -05:00 |
|
Thomas Harte
|
aceb7e3b6b
|
Started implementing write sector on the 1770, immediately deciding it would be useful to have a callback for end-of-queued-data-written from disk controller. So had a go at implementing that, naively. More investigation required.
|
2016-12-25 12:31:38 -05:00 |
|
Thomas Harte
|
901f19f89c
|
Added enough stuff that SSDs attached to a 1770 will now reach the entry point for writing.
|
2016-12-25 09:46:12 -05:00 |
|
Thomas Harte
|
c304db0f5a
|
Deintegrated the busy flag and the interrupt request line, as the latter is reset by status reads. Which also means I can start reporting the WD INTRQ line status directly from the Microdisc. That appears to be correct, rather than honouring the Microdisc IRQ select there.
|
2016-12-06 21:16:29 -05:00 |
|
Thomas Harte
|
ca50606e1d
|
Restored Vic audio.
|
2016-12-03 17:10:47 -05:00 |
|
Thomas Harte
|
36bc558798
|
Converted all 'Components' to postfix underscores.
|
2016-12-03 10:51:09 -05:00 |
|
Thomas Harte
|
81ee834530
|
As well as a bunch of logging, reinstated rotation position preservation across tracks.
|
2016-12-02 18:36:47 -05:00 |
|
Thomas Harte
|
93c573bfa9
|
Implemented missing status bits (other than the index hole), and a head loading delay for the Microdisc.
|
2016-12-01 21:13:16 -05:00 |
|
Thomas Harte
|
0a0775c3bd
|
Removed earlier hacky solution.
|
2016-12-01 20:16:11 -05:00 |
|
Thomas Harte
|
442986ee2c
|
Introduced a head loading path for 1793 machines.
|
2016-12-01 20:12:22 -05:00 |
|
Thomas Harte
|
82899f2f47
|
Ensured flag setting is atomic, removed duplication of interrupt request versus busy, found better names for the personality testers, unified delegate protocol.
|
2016-12-01 07:41:52 -05:00 |
|
Thomas Harte
|
b31fd11470
|
Fixed reporting of data request line, initial status values.
|
2016-11-30 22:39:55 -05:00 |
|
Thomas Harte
|
2222cb65d6
|
Split the status up into flags, assembled into a register upon demand. Attempted to implement some of the differences between the 1770/1772 and 1773/1793. Albeit with a motor fix still in place.
|
2016-11-30 22:26:02 -05:00 |
|
Thomas Harte
|
84cb07613d
|
Checked some documentation more thoroughly; the 1793 has quite different spin-up (/head load) semantics. So it's another distinct personality. Grrr.
|
2016-11-27 20:39:08 -08:00 |
|
Thomas Harte
|
02ba1f220f
|
The '72 seems to be a '70 with altered timing. So worth differentiating.
|
2016-11-27 21:06:17 +08:00 |
|
Thomas Harte
|
2c01f9dbed
|
Added meaningful TODOs.
|
2016-11-27 08:42:39 +08:00 |
|
Thomas Harte
|
2f459690d4
|
It would appear the 1770 and 1773 actually differ in relation to the (non-sensical) ability not to spin-up for a Type 2, and whether a side compare can occur. So the WD1770 class now requires a personality to be specified. Which it singly fails to honour.
|
2016-11-26 23:29:30 +08:00 |
|
Thomas Harte
|
d8ecc52de8
|
Temporarily disabled spin-down as harmful to the status register if following anything other than a Type 1 command.
|
2016-11-26 22:27:20 +08:00 |
|
Thomas Harte
|
b9677c9927
|
Consolidated interrupt request setting.
|
2016-11-26 09:41:53 +08:00 |
|
Thomas Harte
|
d5f9e0aa3b
|
Ensured there's no such thing as a zero-cycle operation, even if i don't yet know exactly what I should be doing.
|
2016-11-25 21:24:25 +08:00 |
|
Thomas Harte
|
4af678d2ed
|
Gave the Microdisc a clock signal, added just enough of force interrupt to avoid a spurious belief that a type 3 command has started.
|
2016-11-25 20:51:39 +08:00 |
|
Thomas Harte
|
d4a1961378
|
Added getters for the IRQ and DRQ lines plus a delegate to receive changes; adjusted code so that the two lines signal.
|
2016-11-21 13:21:49 +08:00 |
|
Thomas Harte
|
7eeaac23e7
|
Reversed myself. I once again do not think the clock is divided by 256 for envelopes.
|
2016-11-11 20:31:48 -05:00 |
|
Thomas Harte
|
77987bf31e
|
Decided to go with divide by 256 for the envelope counter after all.
|
2016-11-09 21:51:56 -05:00 |
|
Thomas Harte
|
77ce200fbb
|
Simplified/corrected AY tone/noise mixer logic, and made a new guess at the effect of reading registers that are smaller than 8 bits.
|
2016-11-09 21:21:17 -05:00 |
|
Thomas Harte
|
fa65cc2058
|
Resolved type conversion error.
|
2016-11-05 12:57:01 -04:00 |
|
Thomas Harte
|
30c670f8de
|
Ensured programmatic setting of the timers occurs during phase 2 _instead_ of counting.
|
2016-11-04 21:30:18 -04:00 |
|
Thomas Harte
|
21604376e6
|
Reintroduced clocking of the AY and boxed in the range of the master divider a little further.
|
2016-10-30 22:51:08 -04:00 |
|
Thomas Harte
|
ad00304e8a
|
Fixed 6522 countdown.
|
2016-10-28 21:05:42 -04:00 |
|
Thomas Harte
|
4fab794747
|
Added a direct-to-two-cycles emulation path for 6522 owners.
|
2016-10-27 21:13:25 -04:00 |
|
Thomas Harte
|
2eda0b3c86
|
Attempted to simplify the logic behind the most common 6522 usage.
|
2016-10-27 21:06:31 -04:00 |
|
Thomas Harte
|
fd823dc222
|
Settled on terminology.
|
2016-10-23 20:42:49 -04:00 |
|
Thomas Harte
|
b12f2f2796
|
Switched to more straightforward version of two-step loop, dealing with my mistaken dealing of when _master_divider&15 == 0 upon entry without adding an extra sanity check. Am also temporarily on non-modulo logic for tone generation, for a profiling test.
|
2016-10-23 20:32:48 -04:00 |
|
Thomas Harte
|
583db88299
|
Added a dispatch queue-powered Apple implementation of the async task queue, removed any mention of skip_samples in the AY since it isn't implemented.
|
2016-10-22 21:58:45 -04:00 |
|
Thomas Harte
|
33e628a096
|
Made an attempt to eliminate what amounts to manual division.
|
2016-10-21 22:16:44 -04:00 |
|
Thomas Harte
|
46a3c0922f
|
Slightly simplified code, fixed divider.
|
2016-10-21 22:12:44 -04:00 |
|
Thomas Harte
|
d7c0c49715
|
Might as well be consistent with divider loads.
|
2016-10-21 20:07:14 -04:00 |
|
Thomas Harte
|
782ef960e1
|
Sought both to [start to] optimise the AY and correct divider reloads. It turns out that conditionals aren't that troubling. But I can probably eliminate the counters.
|
2016-10-21 20:05:38 -04:00 |
|
Thomas Harte
|
cd59eb5f43
|
Implemented non-linear volume.
|
2016-10-19 23:07:51 -04:00 |
|
Thomas Harte
|
b59da7d4bc
|
Added some documentation.
|
2016-10-19 22:47:44 -04:00 |
|
Thomas Harte
|
08275c6241
|
Fixed mixer IO bit usage.
|
2016-10-19 22:22:15 -04:00 |
|
Thomas Harte
|
59162228ef
|
Reduced mask for clarity.
|
2016-10-19 22:14:05 -04:00 |
|
Thomas Harte
|
319d7c2b12
|
Fixed premature wrapping of the envelope, played about with whether that should be subject to a predivision by 256. It feels unlikely?
|
2016-10-19 22:12:51 -04:00 |
|
Thomas Harte
|
6073906c39
|
Commented and fixed mistake that would equate any noise divider > 32768 with 0.
|
2016-10-19 21:51:35 -04:00 |
|
Thomas Harte
|
101f168ea4
|
Made an attempt to tidy up.
|
2016-10-19 21:43:18 -04:00 |
|
Thomas Harte
|
ada37abe23
|
Made an attempt to implement noise and envelopes. Not quite right yet.
|
2016-10-19 21:13:22 -04:00 |
|
Thomas Harte
|
bd6e6674a0
|
Fixed signed shift assumption and noise-related register test.
|
2016-10-18 22:20:12 -04:00 |
|
Thomas Harte
|
9669a5ec9b
|
Switched to a more authentic interfacing to the AY.
|
2016-10-18 19:32:15 -04:00 |
|
Thomas Harte
|
43612e1ca2
|
Made an attempt to eliminate conditionals (running before I can walk?) and started edging towards an envelope generator.
|
2016-10-17 08:03:38 -04:00 |
|
Thomas Harte
|
9730e8247f
|
Ensured propagation of synchronise messages, added enough to do plain tone. Probably. So: noise and envelopes missing. And it's all far too quiet.
|
2016-10-15 21:04:21 -04:00 |
|
Thomas Harte
|
51bdac27ae
|
Made some AY advances; it's now being polled for samples and collecting more information on what it needs to output.
|
2016-10-15 17:45:39 -04:00 |
|
Thomas Harte
|
288d10c253
|
Got some keyboard reaction.
|
2016-10-14 21:44:15 -04:00 |
|
Thomas Harte
|
138eabcff4
|
Continued in my effort to wire up a keyboard. Will need further to continue.
|
2016-10-14 21:35:15 -04:00 |
|
Thomas Harte
|
d8e4c488c2
|
Started iterating towards having an AY and a fully-working keyboard.
|
2016-10-14 21:18:03 -04:00 |
|
Thomas Harte
|
922dd6a586
|
Hit up the other two kinds of audio generator.
|
2016-10-07 17:10:00 -04:00 |
|
Thomas Harte
|
79412dc84d
|
Upped MFM clock cycles, switched back to using the typer for the ADFS and adjusted ADFS ROM slots.
|
2016-09-28 21:28:34 -04:00 |
|
Thomas Harte
|
91235c7fd7
|
Fixed issue whereby parts of data that merely looked like index or ID address marks within tracks caused a resynchronisation of the tokeniser.
|
2016-09-27 07:36:37 -04:00 |
|
Thomas Harte
|
6330e5706c
|
Fixed seek verify. First ADFS directory is visible.
|
2016-09-25 21:44:46 -04:00 |
|
Thomas Harte
|
4db086949a
|
Made an attempt to add MFM decoding to the 1770; ensured something is returned when reading the Plus 3 status register again.
|
2016-09-25 21:38:52 -04:00 |
|
Thomas Harte
|
572d5587d9
|
Made a first stab at enabling multi-disk machines and thereby obeying (some of) the Plus 3's status register.
|
2016-09-25 21:24:16 -04:00 |
|
Thomas Harte
|
9bbcbd1001
|
Renamed class, intending to turn a Disk::Drive into literally just that, and have a thing with a PLL that consumes events be a Controller .
|
2016-09-25 20:05:56 -04:00 |
|
Thomas Harte
|
6084020ab3
|
Added shift-break as a better way to boot suitable disks. Continued attempting to clean the 1770.
|
2016-09-25 14:11:22 -04:00 |
|
Thomas Harte
|
a538b45213
|
Sought to implement the verify step of type 1 commands.
|
2016-09-25 09:54:49 -04:00 |
|
Thomas Harte
|
0918751802
|
Fixed stepping out.
|
2016-09-24 22:48:45 -04:00 |
|
Thomas Harte
|
9e1d4c8b01
|
Fixed an initial setup error with seek.
|
2016-09-24 22:43:12 -04:00 |
|
Thomas Harte
|
d50629e6aa
|
This is clearly the winning solution. Edited down.
|
2016-09-24 22:36:38 -04:00 |
|
Thomas Harte
|
07ff5138b7
|
The catalogue now loads.
|
2016-09-24 22:35:34 -04:00 |
|
Thomas Harte
|
1b69ad0fd4
|
This attempts to implment sector reading. DFS reports an error.
|
2016-09-24 22:29:02 -04:00 |
|
Thomas Harte
|
ce4100e5b9
|
Fixed slots for DFS and ADFS to sideways RAM; continued working on the 1770 to get as far as trying to get the body of a sector.
|
2016-09-24 22:04:54 -04:00 |
|
Thomas Harte
|
7154e8986e
|
Fixed stepping delay.
|
2016-09-24 20:16:23 -04:00 |
|
Thomas Harte
|
53522e28e2
|
Performed an about-face on how this should probably be implemented. Now forsaking the state machine in favour of a macro'd switch-for-cooperative-event-based-messaging implementation. Let's see how this ends up looking.
|
2016-09-24 20:12:45 -04:00 |
|
Thomas Harte
|
88bbeedad3
|
Set actual bit length.
|
2016-09-22 21:28:23 -04:00 |
|
Thomas Harte
|
75eb62b577
|
One painful step at a time, this now starts the disk rotating and gets as far as deciding whether it's about to head off on a read or a write.
|
2016-09-22 21:25:31 -04:00 |
|
Thomas Harte
|
8db0030068
|
Fixed ROM loading by the Electron, turned the WD1770 into a 'disk drive' (it'll do for now), persuaded it to get all the way through a very specifically convenient type 1 command.
|
2016-09-20 22:14:33 -04:00 |
|
Thomas Harte
|
7a34ae0da6
|
This is the start of my slog through type 1 commands. I kind of need to figure out what I'm doing about drives and PLLs now though.
|
2016-09-20 16:58:23 -04:00 |
|
Thomas Harte
|
3b97b038b9
|
Corrected and sketched out state machine far enough to get to a complaint about unhandled work.
|
2016-09-20 15:56:31 -04:00 |
|
Thomas Harte
|
a9e65e9b7a
|
Tweaked disk side density, added call-outs to a WD1770 if the Electron had one (albeit without run_for_cycles yet as I need to figure out the clock rate), added a shell of the basic functions of the WD1770. No implementation yet.
|
2016-09-19 22:06:56 -04:00 |
|
Thomas Harte
|
bcf91de7e9
|
Declared support for the Acorn disk files, started hammering out an encoder.
|
2016-09-18 13:35:54 -04:00 |
|
Thomas Harte
|
e3daf80564
|
Added a file for the 1770, at least.
|
2016-09-17 18:01:00 -04:00 |
|
Thomas Harte
|
eeec516fa6
|
Implemented seeking on tapes, mucked about a bit more with the Commodore analyser, at least temporarily removed cropping from the Vic emulator.
|
2016-09-11 17:09:00 -04:00 |
|
Thomas Harte
|
1541273785
|
Moved responsibility for throwing in a low-pass filter up to the Vic, appropriately.
|
2016-08-21 18:13:31 -04:00 |
|
Thomas Harte
|
c783090980
|
It turns out that the Vic has a 1.6Khz low-pass filter. So added that.
|
2016-08-21 12:13:41 -04:00 |
|
Thomas Harte
|
8d839c5278
|
I think this is correct. And have explained why.
|
2016-08-20 16:54:43 -04:00 |
|
Thomas Harte
|
7c9455251d
|
Fixed reload for the lower-frequency audio channels.
|
2016-08-19 17:34:01 -04:00 |
|
Thomas Harte
|
99157ad6b2
|
Ensured the 6560 knows its real audio clock on a PAL machine; removed some stray semicolons.
|
2016-08-19 13:35:34 -04:00 |
|
Thomas Harte
|
902c0f967a
|
Implements known phase pattern for PAL output.
|
2016-08-17 08:09:48 -04:00 |
|
Thomas Harte
|
142774be37
|
Collapsed 6560 template to a more direct loop, albeit with quite a bit still left to fix.
|
2016-08-09 21:10:53 -04:00 |
|
Thomas Harte
|
12bad8f23f
|
Turned the 6560 into an ordinary template, similar to the rest of the project, albeit right now with a fairly shonky internal implementation. Fixed a Mac-specific interface sizing issue.
|
2016-08-09 20:41:05 -04:00 |
|
Thomas Harte
|
3e65450a54
|
Converted the 6560 fully into a template; worked on allowing the typer to run at a much faster rate where hardware has some trigger by which it can request the next key.
|
2016-08-06 14:33:24 -04:00 |
|
Thomas Harte
|
c6e046253e
|
Shunted code for the main part up into the header, in advance of turning it into a template so as to bring it inside the normal orthodoxy.
|
2016-08-05 19:13:49 -04:00 |
|
Thomas Harte
|
5d40d70c92
|
Fixed 6560 addressing error, added an autotyper for Vic disks (more work potentially needed), fixed semantics for testing whether a 6502 is about to reset.
|
2016-08-01 10:32:32 -04:00 |
|
Thomas Harte
|
b43a7381ae
|
Fixed framing and first-byte-after-sync signalling. Hacked together as parts of it are, loading now appears to work!
|
2016-08-01 04:25:11 -04:00 |
|
Thomas Harte
|
11cd541786
|
Fixed accidental indentation.
|
2016-07-10 08:05:05 -04:00 |
|
Thomas Harte
|
c0ab45a73d
|
Disabled a bunch of the caveman debug logging.
|
2016-07-09 22:29:11 -04:00 |
|
Thomas Harte
|
7cc4bf3fe7
|
Hit and hope is getting me nowhere. Time to unit test this thing.
|
2016-07-09 15:40:25 -04:00 |
|
Thomas Harte
|
1baf21827c
|
Since the ROM is well disassembled, let's actually try to be a 1541 first.
|
2016-07-06 22:17:32 -04:00 |
|
Thomas Harte
|
8819711bc8
|
Threw in the second VIA as a currently clearly incorrect thing.
|
2016-07-05 22:22:09 -04:00 |
|
Thomas Harte
|
602e7f01c7
|
Control lines seem to have evolved to pure push.
|
2016-07-05 21:15:29 -04:00 |
|
Thomas Harte
|
93c2bb80a2
|
Improved a comment, added independent C[A/B]2 input mode.
|
2016-07-05 21:11:51 -04:00 |
|
Thomas Harte
|
1bb109a23b
|
Made a quick attempt at basic C[A/B]2 interrupts.
|
2016-07-05 20:39:15 -04:00 |
|
Thomas Harte
|
c3b7d24293
|
It appears that the attention line is also wired to CB2. So the ball is back in the 6522's court.
|
2016-07-05 19:19:46 -04:00 |
|
Thomas Harte
|
97751a9d86
|
Took the preliminary steps necessary to wire up a serial port.
|
2016-07-05 10:55:47 -04:00 |
|
Thomas Harte
|
88964ceac0
|
Eliminated plain pointer passing for object types.
|
2016-07-04 19:33:55 -04:00 |
|
Thomas Harte
|
82b0bc9b58
|
Discovered that this is another meaningful usage of using .
|
2016-07-04 19:10:10 -04:00 |
|
Thomas Harte
|
7fa010a463
|
Attempted to add support for the most basic of control line output, and slightly to optimise the Vic.
|
2016-07-01 19:01:22 -04:00 |
|
Thomas Harte
|
5c85366de2
|
Made an attempt to prevent spurious border colour pushes.
|
2016-06-29 21:22:26 -04:00 |
|
Thomas Harte
|
ff53accca0
|
Demonstrated that issue is coloured borders, made a guess as to buffer exhaustion, upped limits as a temporary fix.
|
2016-06-29 21:16:34 -04:00 |
|
Thomas Harte
|
0182b0483a
|
Added a 'power on' flag that is set automatically at construction but can be declined. Saves all that stuff of every machine having to set and then unset the RST line, and fixes an Electron bug related to that.
|
2016-06-29 19:13:24 -04:00 |
|
Thomas Harte
|
de5d2f1113
|
Ensured the line counter increments late on NTSC.
|
2016-06-27 22:12:55 -04:00 |
|
Thomas Harte
|
69d78dfdb3
|
Removed logging.
|
2016-06-26 21:36:26 -04:00 |
|
Thomas Harte
|
843d1fdca7
|
Added some extra logging while trying to determine what's going on; added interrupt clearing for the control lines.
|
2016-06-26 21:30:06 -04:00 |
|
Thomas Harte
|
c306d705e1
|
Made a quick first attempt at all-the-way-through tape wiring for the Vic.
|
2016-06-26 19:43:09 -04:00 |
|
Thomas Harte
|
37ba42a52f
|
Factored out the stuff of playing a tape, started basic sketch of the Vic-related classes.
|
2016-06-26 19:03:57 -04:00 |
|
Thomas Harte
|
066db59773
|
Made a hasty attempt to implement CA1 and CB1 input as a potential source of interrupts.
|
2016-06-26 16:32:27 -04:00 |
|
Thomas Harte
|
d5e50f5ea0
|
Got a bit more explicit about how ports are identified on the 6522.
|
2016-06-26 12:30:01 -04:00 |
|
Thomas Harte
|
3c9183d034
|
Improved some commenting.
|
2016-06-23 20:43:29 -04:00 |
|
Thomas Harte
|
359ffb9aa7
|
Made some attempt to implement what appears to be the proper address generation logic.
|
2016-06-23 07:32:24 -04:00 |
|
Thomas Harte
|
b753690d5e
|
Made an attempt to adjust the 6560 to a model compatible with that advocated by the available documentation. Exact decision timing may need further work.
|
2016-06-21 22:12:01 -04:00 |
|
Thomas Harte
|
106e56600d
|
Added a DC offset for 6560 volume level, albeit one plucked from thin air.
|
2016-06-21 07:31:14 -04:00 |
|
Thomas Harte
|
fe17d1778c
|
Expanded 6532 tests substantially, beefing up implementation to match.
|
2016-06-20 21:02:42 -04:00 |
|
Thomas Harte
|
88e2b382e5
|
Made an attempt at a full and thorough 6532 implementation (and got a bit more explicit about flag size in the 6502).
|
2016-06-20 18:57:35 -04:00 |
|
Thomas Harte
|
d4b9ff0ca4
|
Doubles up on register mirroring. Will do for now. More to come.
|
2016-06-20 07:27:38 -04:00 |
|
Thomas Harte
|
4db61d98f4
|
Killed the .cpp.
|
2016-06-19 20:21:38 -04:00 |
|
Thomas Harte
|
7cf6008e7c
|
Started some very basic RIOT unit tests; corrected to pass.
|
2016-06-19 20:12:47 -04:00 |
|
Thomas Harte
|
65413f078c
|
Factored out the 6532, eventually to make it testable.
|
2016-06-19 18:57:40 -04:00 |
|
Thomas Harte
|
ce2f5515c0
|
Made some minor documentation improvements, killed 6522.cpp as the 6522 is going to be a template only, attempting to promote good inlining behaviour.
|
2016-06-19 18:11:37 -04:00 |
|
Thomas Harte
|
f4915c5ad6
|
Fixed test and added basic implementation of data direction.
|
2016-06-18 17:17:03 -04:00 |
|
Thomas Harte
|
5d26cd85a3
|
Wrote test case for what appears to be correct timer behaviour if those were acting in isolation. Ensured implementation matches test case.
|
2016-06-18 14:30:23 -04:00 |
|
Thomas Harte
|
394902f409
|
Switched to clocking the 6522 by the half-cycle. Very trivial test now passes.
|
2016-06-18 13:57:10 -04:00 |
|
Thomas Harte
|
595791cee0
|
Made the base 6522 class more abstract: you must now opt-in if you want the IRQ line to be sent to a delegate.
|
2016-06-18 08:51:18 -04:00 |
|
Thomas Harte
|
ce7488dd30
|
Added support for _invertedCells. Treading water a little before making real changes.
|
2016-06-14 21:06:29 -04:00 |
|
Thomas Harte
|
926f819e3b
|
Added some documentation, made the speaker private.
|
2016-06-14 20:00:16 -04:00 |
|
Thomas Harte
|
a2a6e3c818
|
Fixed phase offsets.
|
2016-06-14 18:19:06 -04:00 |
|
Thomas Harte
|
f4884a3481
|
Added the noise channel, albeit not very creatively.
|
2016-06-14 17:50:32 -04:00 |
|
Thomas Harte
|
c18cc4c8f5
|
It appears the Vic's output is sine-ish, after all. Also adjusted centre of display, simultaneously adding some validation on that.
|
2016-06-14 07:29:35 -04:00 |
|
Thomas Harte
|
fdc854c0c2
|
Fixed tone channels; made an attempt at loading PRGs that are supposed to go into RAM.
|
2016-06-13 21:49:59 -04:00 |
|
Thomas Harte
|
efcb196ef7
|
Made a complete attempt at the tone channels.
|
2016-06-13 20:59:01 -04:00 |
|
Thomas Harte
|
f1a45c1011
|
Merge branch 'VicAudio' into Vic-20
|
2016-06-13 19:34:13 -04:00 |
|
Thomas Harte
|
2d23bc46f2
|
Whoops; fixed line count target test.
|
2016-06-13 19:34:01 -04:00 |
|
Thomas Harte
|
5fc36b956c
|
Attempted most basic sketching of a container for Vic audio.
|
2016-06-13 19:30:52 -04:00 |
|
Thomas Harte
|
91c406e065
|
Made an attempt to honour interlaced-frame line counts.
|
2016-06-13 18:21:21 -04:00 |
|
Thomas Harte
|
2e946e785f
|
Settled on half-intensity colour for now, appears likely not to be too incorrect(?)
|
2016-06-13 18:20:21 -04:00 |
|
Thomas Harte
|
e10535181d
|
Made an attempt to implement interlaced video.
|
2016-06-12 22:27:58 -04:00 |
|
Thomas Harte
|
4ad55a7f5e
|
Trimmed the visible area.
|
2016-06-12 18:01:38 -04:00 |
|
Thomas Harte
|
a5efa7543a
|
Added vertical sync, switching fully to the normal NTSC colour space.
|
2016-06-12 17:57:52 -04:00 |
|
Thomas Harte
|
4c2b964cd4
|
Added NTSC-VIC's switching of phase every field.
|
2016-06-12 17:45:25 -04:00 |
|
Thomas Harte
|
6b5a322918
|
Fixed all colours, plus special case no-chroma for black and white.
|
2016-06-12 17:41:52 -04:00 |
|
Thomas Harte
|
580c8bdcbd
|
Ported rest.
|
2016-06-12 17:29:44 -04:00 |
|
Thomas Harte
|
1a2b18f93b
|
Steps towards CPU mapping; diagnostic.
|
2016-06-12 17:27:57 -04:00 |
|
Thomas Harte
|
8abf395202
|
Experimented with table-based GLSL lookups, and a sine curve. Now _exceedingly_ slow, but colours are correct if I pretend I'm in the YUV colour space.
|
2016-06-12 14:57:24 -04:00 |
|
Thomas Harte
|
2992183aae
|
Switched to a lookup table for phase, temporarily in YUV colour space, probably. Working on it.
|
2016-06-12 14:39:17 -04:00 |
|
Thomas Harte
|
ed76e36b18
|
Made basic attempt at 16-line character mode.
|
2016-06-12 11:23:57 -04:00 |
|
Thomas Harte
|
d1731b1d26
|
Hacked my 6522 to work. Mistake is in not returning output as input when appropriate — i.e. that I'm ignoring data direction. Also fixed K and L keys.
|
2016-06-11 13:06:01 -04:00 |
|
Thomas Harte
|
7a241b5ef5
|
Added just enough hopefully to allow implementation of the keyboard-input VIA.
|
2016-06-11 11:34:39 -04:00 |
|
Thomas Harte
|
de84758862
|
This is how flags writes are supposed to work, it seems.
|
2016-06-11 07:58:32 -04:00 |
|
Thomas Harte
|
1054793fd7
|
Fixed interrupt enable register. This makes a lot more sense!
|
2016-06-11 07:57:04 -04:00 |
|
Thomas Harte
|
82a3c4964b
|
Decided to keep the internal copy of the interrupt enable the other way around. Reduced delegate noise.
|
2016-06-11 07:49:07 -04:00 |
|
Thomas Harte
|
a71259dec3
|
Gave the 6522 a full and grouped register set.
|
2016-06-11 07:12:55 -04:00 |
|
Thomas Harte
|
1ed04fae1e
|
Resolved 6560 addressing.
|
2016-06-10 18:12:21 -04:00 |
|
Thomas Harte
|
f3b1d7de82
|
... and that's a flashing cursor. Keyboard input next!
|
2016-06-09 22:37:59 -04:00 |
|
Thomas Harte
|
30b7db3979
|
Attempted a square wave, made the Vic itself responsible for address manipulation re:the 6560.
|
2016-06-09 22:05:17 -04:00 |
|
Thomas Harte
|
e99055bedb
|
Attempted switching back to a square wave for the composite video and otherwise implementing what's necessary to get to that flashing cursor — the 6560 returns its scan line and the timing bits of the 6522 are appearing.
|
2016-06-08 22:15:24 -04:00 |
|
Thomas Harte
|
581eace478
|
Increased logging slightly, ensured all of colour RAM can be read, slightly improved the 2600 pixel decoder.
|
2016-06-07 22:01:14 -04:00 |
|
Thomas Harte
|
26ab96868a
|
Decided to turn the 6522 into a template, since it's a per-cycle thing with variable behaviour. Added appropriate memory map callouts to hit the two in the Vic. Though they don't yet do anything.
|
2016-06-07 19:15:18 -04:00 |
|
Thomas Harte
|
6522530e1c
|
Actually, I'm dithering over whether the 6522 should be an ordinary class or a curiously-recurring template. But it'll need a file, definitely.
|
2016-06-06 21:56:02 -04:00 |
|
Thomas Harte
|
ca23e2e10a
|
This now proceeds to an ostensibly working basic prompt. Colours are wrong, 6560 is probably very wrong, 6522 is still absent. Hence no cursor.
|
2016-06-06 20:33:06 -04:00 |
|
Thomas Harte
|
c7c55528e2
|
Realised that registers appear also to be readable.
|
2016-06-06 20:29:39 -04:00 |
|
Thomas Harte
|
e8cb674073
|
Made some attempt at colours, at least.
|
2016-06-06 20:18:24 -04:00 |
|
Thomas Harte
|
89c87c3e81
|
Some major hackiness gives the first line of expected text repeating endlessly (as the end of columns is never reached, as that's back to thinking it's 0x7f); I also don't yet know which actor is supposed to do the '+0x8000' (which probably shouldn't be that but might be a pin on the 6560 indicating what sort of value is being fetched, that effects chip select for the various bits of memory?)
|
2016-06-06 07:47:30 -04:00 |
|
Thomas Harte
|
64539a2b24
|
Advanced to having some characters displayed, even though they're obviously very much incorrect and the display is still rolling.
|
2016-06-06 07:35:35 -04:00 |
|
Thomas Harte
|
79e05a2413
|
Without yet figuring out what vertical sync is meant to do, moved just about far enough forwards to see _something_ that hopefully I can soon discern characters within.
|
2016-06-05 18:02:49 -04:00 |
|
Thomas Harte
|
444d3b69b6
|
Made some elementary attempt to hit something like the correct states within the VIC.
|
2016-06-05 17:06:10 -04:00 |
|
Thomas Harte
|
9e9e50edb1
|
Added guess on how colour memory and the 12-bit bus possibly works.
|
2016-06-05 16:28:06 -04:00 |
|
Thomas Harte
|
3be1ce457b
|
Made some attempt at discerning fields.
|
2016-06-05 14:05:31 -04:00 |
|