Thomas Harte
|
37696532c2
|
Merge pull request #143 from TomHarte/MotorControl
Introduces both manual and automatic tape control for the ZX80 and 81
|
2017-07-08 19:34:40 -04:00 |
|
Thomas Harte
|
54efcb7e2f
|
Made a game attempt at automatic motor control and ensured setting is initialised correctly from the user defaults.
|
2017-07-08 19:31:20 -04:00 |
|
Thomas Harte
|
bcb7c27cc4
|
Given that I'm not racing this any more, turned the intended 1 second back into 1 second.
|
2017-07-08 19:21:33 -04:00 |
|
Thomas Harte
|
e2575d6de4
|
Routed tape motor selections through to the C++ side of the world, and ensured that manual tape playback works properly.
|
2017-07-08 19:21:12 -04:00 |
|
Thomas Harte
|
23e989e170
|
This will likely do for the Swift/XIB side of things: the play/pause button is enabled or disabled as per the user's choice of automatic tape control, and toggles function when pressed. It communicates activity down to the Objective-C[++] layer, giving it a route through to the actual machine.
|
2017-07-08 19:12:06 -04:00 |
|
Thomas Harte
|
28412150e6
|
Added controls for controlling the tape motor of the ZX80/81, assuming I can find an automatic option.
|
2017-07-08 17:59:33 -04:00 |
|
Thomas Harte
|
6d941b0c1f
|
Merge pull request #142 from TomHarte/BufferOverflow
Corrects a source of potential desynchronisation between the texture and geometry builders
|
2017-07-08 16:54:41 -04:00 |
|
Thomas Harte
|
2f90f35478
|
Ensured the same write area can be submitted multiple times — this is actively used if a run of data overlaps a flywheel-suggested sync. Which nullifies the idea of not having a write area in the barrel, at least as soon as any one has been allocated.
|
2017-07-07 23:37:44 -04:00 |
|
Thomas Harte
|
12f7e1b804
|
Enshrined a default colour burst amplitude. Which now everybody relies on. The 102 figure is derived from the burst apparently being 40 IRE.
|
2017-07-07 23:35:14 -04:00 |
|
Thomas Harte
|
c7fa2ed11a
|
It makes more sense not to retain the previous texture builder run until vertex storage is confirmed.
|
2017-07-07 23:21:25 -04:00 |
|
Thomas Harte
|
bfbe12b94b
|
Made an attempt further to tie geometry and texture generation fully together, removing the assumption that the caller will achieve one-to-one calling.
|
2017-07-07 22:25:05 -04:00 |
|
Thomas Harte
|
7476c64a66
|
Merge branch 'master' into BufferOverflow
|
2017-07-07 21:11:07 -04:00 |
|
Thomas Harte
|
46fff8e8a2
|
Ensured bit 8 is uniquely from the latched video byte, not an OR of that with the refresh address.
|
2017-07-06 22:48:48 -04:00 |
|
Thomas Harte
|
cd646aab9e
|
Merge pull request #141 from TomHarte/ZX81FastLoading
Corrects ZX81 fast loading
|
2017-07-06 22:39:19 -04:00 |
|
Thomas Harte
|
a3684545b5
|
Added a block on the tape motor for a short period after each time the ROM routine is intercepted for a substituted byte read. To reduce the collision between fast tape and real tape loading.
|
2017-07-06 22:33:54 -04:00 |
|
Thomas Harte
|
2f42874fd3
|
Another fix to deal with real-time fighting: allow 8 and 18 pulses to be recognised as 1s and 0s. That's because the hand-off from ROM routines to parsing may occur very shortly before the first pulse of a valid sequence, making it look like there's a ghost. A cleaner solution needs to be found, probably revolving around allowing parsers to be attached to tapes and therefore to run constantly.
|
2017-07-06 22:33:03 -04:00 |
|
Thomas Harte
|
84d0e9b4cd
|
Accept a pulse that begins exactly on seek_time as being found while seeking.
|
2017-07-06 22:31:45 -04:00 |
|
Thomas Harte
|
a53011f778
|
Extended intro and outro length because right now I'm racing this myself. Can return to normal once tape motor control is implemented.
|
2017-07-06 22:31:12 -04:00 |
|
Thomas Harte
|
b842c5b8bb
|
Merge branch 'master' into ZX81FastLoading
|
2017-07-06 22:03:24 -04:00 |
|
Thomas Harte
|
ab1374f801
|
Added an assert on an assumed buffer size alignment.
|
2017-07-06 21:46:24 -04:00 |
|
Thomas Harte
|
a5359027f0
|
Merge pull request #140 from TomHarte/ColourSuppression
Causes the CRT to react properly to absence of a colour burst
|
2017-07-06 21:42:02 -04:00 |
|
Thomas Harte
|
43951a36eb
|
Merge branch 'master' into ColourSuppression
|
2017-07-06 21:40:42 -04:00 |
|
Thomas Harte
|
55df96491c
|
Merge pull request #139 from TomHarte/TyperFixes
Corrects a potential invalid memory dereference in the default typer implementation
|
2017-07-06 21:40:15 -04:00 |
|
Thomas Harte
|
0c037627fc
|
Typer fixes: the recipient no longer releases the caller, and a duplicate call to strlen and piece of arithmetic is corrected.
|
2017-07-06 21:38:56 -04:00 |
|
Thomas Harte
|
344d267fd2
|
Introduced sharper chrominance for genuinely black-and-white signals.
|
2017-07-06 21:38:33 -04:00 |
|
Thomas Harte
|
4211389ac7
|
Connected machine-supplied colour burst amplitude to shader, discarding hard-coded value. Net effect: the colour component is now discarded for the ZX80 and 81.
|
2017-07-06 21:29:08 -04:00 |
|
Thomas Harte
|
c6d00ec7d1
|
Switched phase and amplitude varying to a 3d vector; the third component is 1/amplitude if amplitude is non-zero, and zero otherwise. So you can multiply by that to get chrominance, rather than dividing by amplitude. With the direct effect that detected chrominance should automatically be zero if the colour burst didn't exist (i.e. had zero amplitude).
|
2017-07-06 21:25:38 -04:00 |
|
Thomas Harte
|
212ae60622
|
Typer fixes: the recipient no longer releases the caller, and a duplicate call to strlen and piece of arithmetic is corrected.
|
2017-07-06 21:17:04 -04:00 |
|
Thomas Harte
|
a72a2e0a1a
|
Ensured tape doesn't proceed of its own volition when in fast-loading mode.
|
2017-06-23 20:21:37 -04:00 |
|
Thomas Harte
|
50375fb373
|
Ensured tape position is unaffected if the attempt at loading quickly fails.
|
2017-06-23 20:18:19 -04:00 |
|
Thomas Harte
|
2d02c23574
|
Merge pull request #138 from TomHarte/ZX81Ports
Increases port decoding on the ZX81
|
2017-06-23 08:32:21 -04:00 |
|
Thomas Harte
|
cb105fdeb4
|
Took a first stab at high-res support.
|
2017-06-22 22:48:17 -04:00 |
|
Thomas Harte
|
acfd4dde36
|
Reduced port writes which can adjust programmatic sync, and prevented anything while NMI generation is active. Moved line counter increment from triggered by interrupt acknowledge to triggered by horizontal sync. In both cases, cribbing from my own earlier work. Initial results suggest that sync issues are resolved in third-party software.
|
2017-06-22 22:44:06 -04:00 |
|
Thomas Harte
|
919fc48cc5
|
Fixed dumb out-of-bounds access error.
|
2017-06-22 22:28:50 -04:00 |
|
Thomas Harte
|
aec4fd066b
|
I think I've definitively decided against this model of timing.
|
2017-06-22 21:32:14 -04:00 |
|
Thomas Harte
|
73c7b18900
|
Added a public declaration of ZX80/81 support to the readme.
|
2017-06-22 21:14:43 -04:00 |
|
Thomas Harte
|
3dfe45d225
|
Merge pull request #137 from TomHarte/NMIWaitTest
Introduces an NMI/wait interrupt timing test
|
2017-06-22 21:11:54 -04:00 |
|
Thomas Harte
|
95a6b0f85c
|
Introduced an NMI/wait interrupt timing test, and adjusted the Z80 to conform to information posted by Wilf Rigter.
|
2017-06-22 21:09:26 -04:00 |
|
Thomas Harte
|
87ee8450fe
|
Minor rejig: it's much more likely that something that can't be distinguished is a ZX81 program. TODO: some sort of BASIC token parsing, to be more confident.
|
2017-06-22 20:23:14 -04:00 |
|
Thomas Harte
|
f2a6bcf2a8
|
Merge pull request #136 from TomHarte/ZX8081Options
Finally adjusts ZX80/81 tape loading so that the fast loading hack is optional as per the GUI
|
2017-06-22 20:21:28 -04:00 |
|
Thomas Harte
|
644ef13acd
|
Connected up the fast-tape GUI option for the ZX80 and '81.
|
2017-06-22 20:20:31 -04:00 |
|
Thomas Harte
|
342574761f
|
Merge pull request #135 from TomHarte/InterruptWaitStates
Ensures wait states are observed during interrupt response
|
2017-06-22 20:15:54 -04:00 |
|
Thomas Harte
|
b7c978e078
|
Added getters for most of the input lines, and attempted to round out the ZX81's wait logic.
|
2017-06-22 20:11:19 -04:00 |
|
Thomas Harte
|
f0398a6db8
|
Added wait state hooks to the interrupt programs, and added an is_wait query on PartialMachineCycle.
|
2017-06-22 20:07:47 -04:00 |
|
Thomas Harte
|
f3b1ef99cc
|
Merge pull request #134 from TomHarte/BinaryTape
Switches the binary tape player to low = false, high = true
|
2017-06-21 22:25:42 -04:00 |
|
Thomas Harte
|
52d9ddf9e5
|
Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.
|
2017-06-21 22:13:24 -04:00 |
|
Thomas Harte
|
93f251dbcd
|
Merge pull request #133 from TomHarte/ZX81Wait
Utilises the newly-working wait line in ZX81 emulation
|
2017-06-21 21:46:08 -04:00 |
|
Thomas Harte
|
a6810fc3ef
|
Removed some minor duplicity and ensured that hsync/NMI ends on the nominated cycle, not one afterwards.
|
2017-06-21 21:44:42 -04:00 |
|
Thomas Harte
|
15f6c51062
|
Added the most trivial implementation of the ZX81 wait line.
|
2017-06-21 21:28:14 -04:00 |
|
Thomas Harte
|
5e21c706f3
|
Merge pull request #132 from TomHarte/MachineCycles
Subdivides the Z80's machine cycles
|
2017-06-21 21:19:48 -04:00 |
|