772 Commits

Author	SHA1	Message	Date
Thomas Harte	481487f084	Oh yuck, it looks like I've repeated this same test in two different places. Must figure out where to factor it out to. But in the meantime, the emulated Electron has just loaded its first CSW.	2017-07-13 22:39:30 -04:00
Thomas Harte	ac59dd8b1d	Added enough typing to issue a load command. No thoughts as to running yet though.	2017-07-09 22:07:12 -04:00
Thomas Harte	353c854734	Removed a TODO that is no longer appropriate.	2017-07-09 22:06:50 -04:00
Thomas Harte	3e5c209039	Added basic Typer support for the ZX80 and '81.	2017-07-09 22:00:34 -04:00
Thomas Harte	ed28260aaf	Hardens the ZX80/81 video routines to ensure they never try to push data into the future and don't double-count time when pixels would ostensibly run into sync. You could previously see the CRT being handed negative run lengths if sync interrupted pixels or if a run of more than 320 pixels (my arbitrary buffer size) occurred, with corresponding poor behaviour given my use of unsigned numbers.	2017-07-09 19:33:05 -04:00
Thomas Harte	87658e83c1	Moved line counter reset logic; I think this is actually correct.	2017-07-09 00:05:30 -04:00
Thomas Harte	4509c3ce34	By observation, it appears that disabling vsync occurs on any port output whatsoever, as long as NMI isn't blocking it.	2017-07-08 21:01:52 -04:00
Thomas Harte	30e93979d2	Removed data work if sync is enabled; in that case no data is output.	2017-07-08 21:01:07 -04:00
Thomas Harte	d6b87053bf	Introduced an explicit record of whether a video byte is latched. It's definitely incorrect to treat the latching of 0 as equivalent to no latching, as the byte that will eventually become video is not strongly implied.	2017-07-08 20:40:19 -04:00
Thomas Harte	22389a5d2d	Merge branch 'master' into HiRes	2017-07-08 20:38:25 -04:00
Thomas Harte	54efcb7e2f	Made a game attempt at automatic motor control and ensured setting is initialised correctly from the user defaults.	2017-07-08 19:31:20 -04:00
Thomas Harte	e2575d6de4	Routed tape motor selections through to the C++ side of the world, and ensured that manual tape playback works properly.	2017-07-08 19:21:12 -04:00
Thomas Harte	46fff8e8a2	Ensured bit 8 is uniquely from the latched video byte, not an OR of that with the refresh address.	2017-07-06 22:48:48 -04:00
Thomas Harte	a3684545b5	Added a block on the tape motor for a short period after each time the ROM routine is intercepted for a substituted byte read. To reduce the collision between fast tape and real tape loading.	2017-07-06 22:33:54 -04:00
Thomas Harte	b842c5b8bb	Merge branch 'master' into ZX81FastLoading	2017-07-06 22:03:24 -04:00
Thomas Harte	0c037627fc	Typer fixes: the recipient no longer releases the caller, and a duplicate call to strlen and piece of arithmetic is corrected.	2017-07-06 21:38:56 -04:00
Thomas Harte	a72a2e0a1a	Ensured tape doesn't proceed of its own volition when in fast-loading mode.	2017-06-23 20:21:37 -04:00
Thomas Harte	50375fb373	Ensured tape position is unaffected if the attempt at loading quickly fails.	2017-06-23 20:18:19 -04:00
Thomas Harte	cb105fdeb4	Took a first stab at high-res support.	2017-06-22 22:48:17 -04:00
Thomas Harte	acfd4dde36	Reduced port writes which can adjust programmatic sync, and prevented anything while NMI generation is active. Moved line counter increment from triggered by interrupt acknowledge to triggered by horizontal sync. In both cases, cribbing from my own earlier work. Initial results suggest that sync issues are resolved in third-party software.	2017-06-22 22:44:06 -04:00
Thomas Harte	644ef13acd	Connected up the fast-tape GUI option for the ZX80 and '81.	2017-06-22 20:20:31 -04:00
Thomas Harte	b7c978e078	Added getters for most of the input lines, and attempted to round out the ZX81's wait logic.	2017-06-22 20:11:19 -04:00
Thomas Harte	52d9ddf9e5	Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.	2017-06-21 22:13:24 -04:00
Thomas Harte	a6810fc3ef	Removed some minor duplicity and ensured that hsync/NMI ends on the nominated cycle, not one afterwards.	2017-06-21 21:44:42 -04:00
Thomas Harte	15f6c51062	Added the most trivial implementation of the ZX81 wait line.	2017-06-21 21:28:14 -04:00
Thomas Harte	e1355d4b62	Restored proper video output.	2017-06-21 21:18:09 -04:00
Thomas Harte	4bf13610ce	Reinstated interrupts by moving the refresh test back into the refresh cycle.	2017-06-21 21:03:39 -04:00
Thomas Harte	0e0ce379b4	Renamed MachineCycle to PartialMachineCycle given that it mostly no longer intends to describe an entire machine cycle.	2017-06-21 20:38:08 -04:00
Thomas Harte	36e8a11505	Sought to simplify the way partial machine cycles are communicated, for ease of machine implementation. Also implemented the wait line.	2017-06-21 20:32:08 -04:00
Thomas Harte	e1a2580b2a	Renamed BusOperation to MachineCycle::Operation.	2017-06-17 21:53:45 -04:00
Thomas Harte	08a542a324	Reenabled the fast-loading hack.	2017-06-15 18:30:12 -04:00
Thomas Harte	9b3d05e05f	Simplified decoding logic.	2017-06-14 22:24:44 -04:00
Thomas Harte	d8e3103a2b	Fixes: switched ZX80 and ZX81 timing to the correct way around, ensured that my wait takes effect if HALT **isn't** set, and made sure to recover from it.	2017-06-13 21:48:17 -04:00
Thomas Harte	76a64d13a0	Made a first attempt at ZX81 emulation.	2017-06-13 21:25:55 -04:00
Thomas Harte	1e975859c2	Started splitting ZX80 and ZX81 paths. Also the '80 fires its horizontal sync a little earlier than the '81, so pulled that back a little.	2017-06-13 20:09:09 -04:00
Thomas Harte	4c5261bfa0	Made first attempt to use the horizontal counter for something; here for sync timing only, even though I've gone exclusively with '81-style timing for now.	2017-06-12 22:28:30 -04:00
Thomas Harte	8b09b4180b	This now at least remembers whether it is meant to be a ZX81 and has storage for a horizontal counter.	2017-06-12 21:33:16 -04:00
Thomas Harte	b9dbb6bcf8	Discovered my timing error: the I/R <-> A loads should take an extra cycle. This means the ZX80 now finally takes the correct 207 cycles per line. Fixed the video output wave to be clocked at the appropriate rate.	2017-06-12 18:55:04 -04:00
Thomas Harte	302c2e94de	Corrected lingering hard-coded mask. So titles for memory configurations above 1kb now load.	2017-06-11 21:27:46 -04:00
Thomas Harte	06fe07932a	While tidying up, killed an unused instance variable.	2017-06-11 21:21:26 -04:00
Thomas Harte	6913c7a018	This also can just use rom_mask_.	2017-06-11 19:29:20 -04:00
Thomas Harte	6b602c74b7	Made an attempt to support memory maps other than the unexpanded default of 1kb.	2017-06-11 19:29:02 -04:00
Thomas Harte	e40d553045	Bumped the tape parser up into the machine to ensure a maintained state. Temporarily disabled normally-timed tape playback.	2017-06-11 18:31:43 -04:00
Thomas Harte	e5b30cdfbb	Attempted to ensure appropriate resumption of processing after quick-reading a tape byte.	2017-06-11 17:28:47 -04:00
Thomas Harte	ba5f34f827	Narrowed view to the centre 80% of a frame.	2017-06-11 17:24:32 -04:00
Thomas Harte	84d2feb2e6	Cleaned up and implemented fast-tape hack. I've decided it'd be better to test some other software, potentially to give multiple issues to think about, rather than sitting around with just the one.	2017-06-11 16:42:49 -04:00
Thomas Harte	d910a4fd38	Adjusted to signal an interrupt during the refresh cycle rather than weirdly just afterwards. Which cuts video timing down by 4 cycles a line. There still might be a problem here somewhere though, as I'm getting 206 cycles/line and the internet states it should be 207. ... Also: lots of printfs have grown temporarily as I try to figure out what I'm doing so wrong as to break loading.	2017-06-11 13:32:20 -04:00
Thomas Harte	5626d35bc4	Tried flipping the bit meaning; decided at least to leave it in full-byte form.	2017-06-06 18:38:05 -04:00
Thomas Harte	63e0802f4e	Ensured tape input appears on the returned value.	2017-06-06 18:16:27 -04:00
Thomas Harte	e3ee9604a5	Added comments.	2017-06-06 18:01:33 -04:00