Thomas Harte
2c39229b13
Adds has-new-disk flag, allowing mounting of software from the desktop.
2019-07-12 13:17:24 -04:00
Thomas Harte
b730ac5d5a
Reintroduces 1-second disable implementation.
2019-07-11 23:02:47 -04:00
Thomas Harte
c8917e677b
Edging towards implementing IWM write support, but mainly tidied up.
2019-07-11 21:42:34 -04:00
Thomas Harte
cac97a9663
Devolves drive responsibility.
2019-07-10 22:39:56 -04:00
Thomas Harte
be251d6b03
Begins substituting the DoubleDensityDrive for the Sony.
2019-07-10 16:24:48 -04:00
Thomas Harte
6cfaf920ee
Added attribution and commentary on rotation speeds.
2019-07-10 16:22:06 -04:00
Thomas Harte
1657f8768c
Transfers and slightly extends drive logic into the drive.
2019-07-10 16:17:51 -04:00
Thomas Harte
c4ab0bb867
Starts sketching out an interface for IWM drives, eliminating a dangling use of unsigned as it goes.
2019-07-10 16:05:59 -04:00
Thomas Harte
fb6da1de4a
Reduces logging temporarily.
2019-07-08 17:37:15 -04:00
Thomas Harte
191a7a9386
Reintroduces an empty second drive.
...
This prevents the uninitialised disk error. Which is a clue.
2019-07-02 16:59:00 -04:00
Thomas Harte
b9c2c42bc0
Switches drives to using floats for time counting.
...
Hopefully to eliminate a lot of unnecessary `Time` work; inaccuracies should still be within tolerable range.
2019-07-02 15:43:03 -04:00
Thomas Harte
6c588a1510
Makes some further random swings at tracking the startup procedure.
2019-06-28 13:03:47 -04:00
Thomas Harte
00c32e4b59
Further miscellaneous changes to debug logging. All temporary.
2019-06-18 10:34:31 -04:00
Thomas Harte
877b46d2c1
Advances IWM/drive emulation very close to the point of 'Welcome to Macintosh'.
2019-06-15 16:08:54 -04:00
Thomas Harte
cc7226ae9f
Starts trying to get a bit more rigorous about collected meanings.
2019-06-13 22:48:10 -04:00
Thomas Harte
bde975a3b9
Possibly mights the tiniest bit of headway with 'the IWM'.
...
I'm now pretty sure that my 3.5" drive, which for now is implemented in the IWM (yuck) is just responding to queries incorrectly.
2019-06-13 22:38:09 -04:00
Thomas Harte
f6f9024631
Corrects Macintosh aspect ratio (and framing).
2019-06-13 18:41:38 -04:00
Thomas Harte
535747e3f2
Restores single-line logging format.
2019-06-13 13:35:03 -04:00
Thomas Harte
d6150645c0
By hook or by crook, mouse input now works.
2019-06-12 22:19:25 -04:00
Thomas Harte
ad8b68c998
Switches to a proper form of zero-upon-read data.
...
Not that it's necessarily correct.
2019-06-11 19:53:51 -04:00
Thomas Harte
3c075e9542
Switches drives 0 and 1.
2019-06-10 14:58:39 -04:00
Thomas Harte
50d37798a2
Eradicates magic constants.
2019-06-06 21:37:43 -04:00
Thomas Harte
e9d0676e75
Fiddles further with the tachometer.
2019-06-06 21:36:19 -04:00
Thomas Harte
7591906777
Numerous IWM fixes: the machine now seems to be trying to measure the tachometer.
2019-06-06 18:32:11 -04:00
Thomas Harte
a413ae11cb
Makes some sort of first attempt at having the IWM read.
2019-06-04 22:13:00 -04:00
Thomas Harte
b8a1553368
Adds putative support for PlusToo-style BIN files.
...
Albeit a bit of a guess, since it's not intended to be an emulator file format.
2019-06-04 21:41:09 -04:00
Thomas Harte
8557558bd8
Mildly improves investigatory reporting.
2019-06-03 21:51:45 -04:00
Thomas Harte
da2b190288
Stores expected bit length.
2019-06-01 19:08:29 -04:00
Thomas Harte
48d837c636
Attempts to respond more sensibly to various queries.
...
Including adding a 1-second delay on motor off.
2019-06-01 18:43:47 -04:00
Thomas Harte
723137c0d4
With some time additions to the 6522, starts wiring in Macintosh audio.
...
The audio buffer is also the disk motor buffer, so this is preparatory to further disk work.
2019-06-01 14:39:40 -04:00
Thomas Harte
4197c6f149
Attempts to make some further semantic sense of the various IWM controls.
2019-05-30 22:17:49 -04:00
Thomas Harte
4632be4fe5
Wires up the final IWM signal, SEL, preparatory to an implementation.
2019-05-30 12:08:00 -04:00
Thomas Harte
ce099a297a
Eliminates RAM writes in ROM area.
...
I no longer think that logic is correct.
2019-05-07 17:16:22 -04:00
Thomas Harte
96facc103a
Adds an IWM shim and corrects graphics output.
...
... now that there is some.
2019-05-05 21:55:34 -04:00
Thomas Harte
ee89be6730
Removes many stray spaces.
2018-11-23 22:32:32 -05:00
Thomas Harte
70c4d6b9b3
Adds a one second delay between controller and drive motor off.
2018-08-03 21:13:18 -04:00
Thomas Harte
98bb5bd9f1
Ensures flux bits are observable for two cycles rather than one; it should be 1us.
2018-07-31 23:01:11 -04:00
Thomas Harte
dde9b73a22
Creates the through-path that will be necessary for RWTS acceleration.
2018-06-09 12:51:53 -04:00
Thomas Harte
076fa55651
Corrects: flux set is no-flux incoming.
...
This restores good sleeping behaviour.
2018-06-03 08:11:17 -04:00
Thomas Harte
75f9e3caeb
Resolves incorrect bracketing.
2018-05-28 17:48:35 -04:00
Thomas Harte
928aab13dc
Introduces more granular clocking announcements to the Disk II.
...
As well as making it accept the clock rate it'll actually receive, to supply to the drives, so that they spin at the proper speed.
2018-05-28 17:19:29 -04:00
Thomas Harte
db8d8d8404
Commutes Sleeper to ClockingHint::Source, making state more granular.
2018-05-27 23:17:06 -04:00
Thomas Harte
086b801c29
Mildly rearranges to avoid unnecessary call.
2018-05-22 21:50:07 -04:00
Thomas Harte
e482929da8
Enhances the Disk II's ability to sleep.
...
Also enables Disk II sleep observation in the Oric.
2018-05-19 23:15:28 -04:00
Thomas Harte
ed06533e60
Implements write support out of the Disk II.
2018-05-18 22:07:58 -04:00
Thomas Harte
7b7beb13a3
Eliminates the fiction of setting and getting registers.
...
The Disk II seems lower level than that; it will read the data bus whenever it likes, it is the programmer's responsibility to keep up with that. It also reserves the right not to load the bus regardless of whether it receives a read or write access.
2018-05-17 21:39:11 -04:00
Thomas Harte
c46007332a
Switches to returning the shift register contents on every even read.
2018-05-17 20:18:34 -04:00
Thomas Harte
908d3b0ee5
Slightly wrong as to the details, but gets the controller trying to output.
...
At an initial look, I think the shift register should end up on the data bus for all odd accesses. Need to investigate more thoroughly.
2018-05-16 22:37:22 -04:00
Thomas Harte
8a031b1137
Eliminates 'data' register as it doesn't exist; rejigs state machine command set.
2018-05-16 22:09:59 -04:00
Thomas Harte
1aba9f807e
Ensures proper upward propagation of sleeping from first start.
2018-05-16 22:07:54 -04:00
