Thomas Harte
82367a2246
Added documentation.
2017-08-16 09:14:56 -04:00
Thomas Harte
3947347d88
Introduces active input handling for the AY and uses it in the CPC to give proper, active keyboard input, rather than push-on-select, which was only ever a temporary hack. Also maps a few more keys for the Amstrad.
2017-08-15 22:47:17 -04:00
Thomas Harte
aefbafa18d
Centralised the 8272's actions of setting the non-DMA execution flag, picking the drive and head and loading the head for accessing commands, and switched error flag if read ID doesn't find anything.
2017-08-15 21:49:10 -04:00
Thomas Harte
d12c834f9c
Increased amount reported.
2017-08-15 20:35:33 -04:00
Thomas Harte
56de5cb2b3
Removed one further logging event.
2017-08-15 20:18:32 -04:00
Thomas Harte
709257a0c5
Quick fix: also treat reception of sync as a reason not to stop looking for a data address mark.
2017-08-15 20:16:56 -04:00
Thomas Harte
75a9d2bb33
Started withdrawing logging, reduced index hole count back to the correct number and tried to increase read_data rigour.
2017-08-15 20:12:01 -04:00
Thomas Harte
73080d6c36
Added an easy way for disk controllers to clamp termination of written data exactly to the index hole.
...
This commit also temporarily provides a whole load of extra logging and minor logic improvements from the 8272. I'm mid-flow on finding a particularly vicious error in its handling of writing; wait for the pull request. But, at least: now waits for the first part of a post-ID gap before writing data, and attempts partially to handle appearance of the index hole during writing a track. More work to do on that though.
2017-08-15 16:05:10 -04:00
Thomas Harte
9d77f33611
Dealt with another source of repeating magic constants: the command numbers.
2017-08-15 11:06:10 -04:00
Thomas Harte
7d132f81f7
Increased logging by quite a distance and made an attempt once again to allow the processor some time to supply the first byte when writing before declaring overrun.
2017-08-15 10:50:28 -04:00
Thomas Harte
6553bf05b4
Corrected multi-sector reads: ensured the incremented sector number isn't replaced by the original, and that the controller returns to scanning mode.
2017-08-14 22:27:31 -04:00
Thomas Harte
0816d3f5a9
Corrected 'read deleted data' command. It's 0xc, not 0xb.
2017-08-14 21:41:20 -04:00
Thomas Harte
55055c7847
Minor: ensured immediate line comparison works. But I think my problem might be trying to do this as straight line logic?
2017-08-14 19:08:20 -04:00
Thomas Harte
cddcd0fb79
Put my money where my mouth is and switched the superclass of WD1770 to MFMController, eliminating duplicated (/factored out) code.
2017-08-14 16:32:53 -04:00
Thomas Harte
a366298022
Factored out the standard [M]FM gap and mark groups, to increase 8272 readability and because it's pretty-much certain I'll need them again if ever I try to tackle e.g. the 8271.
2017-08-14 16:03:35 -04:00
Thomas Harte
4df9307d25
Factored out the dull and repetitious stuff of writing n bytes of the same value.
2017-08-14 15:50:36 -04:00
Thomas Harte
9038ba622e
Added a quick version of read track.
2017-08-14 14:34:56 -04:00
Thomas Harte
7b8bb0297a
Implemented single density version of format track.
2017-08-14 13:03:17 -04:00
Thomas Harte
0da02d3902
Added read/write escape clauses if faced with a read-only disk.
2017-08-14 12:53:18 -04:00
Thomas Harte
2e5ad19fe1
Minor tidying.
2017-08-14 12:42:48 -04:00
Thomas Harte
a10389a22c
Factored out the stuff of stuffing the bus.
2017-08-14 12:42:22 -04:00
Thomas Harte
cefec7a19f
Sought more robustly (i.e. less repetitively) to handle dispatch, including cancelling seeks where appropriate.
2017-08-14 10:37:39 -04:00
Thomas Harte
7264fbb3d2
read_id now clears status. I probably need to find a way to generalise this.
2017-08-14 09:58:55 -04:00
Thomas Harte
8a7b23dc9e
Ensured data-accessing commands cancel seeks on their drives. Also introduced a count of drives currently seeking in order to make for a slightly better broad-phase test in run_for.
2017-08-14 09:45:39 -04:00
Thomas Harte
b7065575f3
Added (empty) call-ins for DMA usage; switched to having the 'is seeking' bit in the status register stay high until sense interrupt status, but now it goes high even for seeks that don't actually go anywhere, and corrected interpretation of the specify command, with a positive result: the received step rate time, now that it's being interpreted correctly, is much shorter.
2017-08-14 09:04:22 -04:00
Thomas Harte
7ea703f150
Started making provisions for a DMA-compatible implementation. Re: the CPC, it sounds like DMA acknowledge might be permanently wired, causing DMA mode seemingly to work from the 8272's point of view.
2017-08-14 08:38:00 -04:00
Thomas Harte
1011143dbe
Sought to correct my interpretation of 'gap 3'.
2017-08-13 21:52:48 -04:00
Thomas Harte
9ace6e1f71
Applied minimum constraints for specified parameters.
2017-08-13 19:25:57 -04:00
Thomas Harte
5221837be8
Fixed Non-DMA flag for the format track execution phase. The emulated machine now provides sector details.
2017-08-13 18:51:06 -04:00
Thomas Harte
e1e9a06712
Made an attempt at format a track.
2017-08-13 18:05:19 -04:00
Thomas Harte
b0a7208cc7
Strung together a very basic version of 8272 write [/deleted] data. Lots of cases as-yet unhandled.
2017-08-13 12:50:07 -04:00
Thomas Harte
eec42aa7ae
Entrusted further status to drives; also adjusted them to report read only if diskless, which I now believe to be correct.
2017-08-13 11:50:49 -04:00
Thomas Harte
5f42022c1d
Added a tester for the control mark.
2017-08-12 17:35:14 -04:00
Thomas Harte
11d0c37506
Attempted to find a more expressive way for maintaining state — macros for all conditions, to bind both values and destinations.
2017-08-12 17:33:52 -04:00
Thomas Harte
27d1dc5c37
Removed some old printfs.
2017-08-12 16:49:20 -04:00
Thomas Harte
7135259cc1
Sought to flesh out error conditions.
2017-08-12 16:36:37 -04:00
Thomas Harte
4909325e79
Implemented read deleted data.
2017-08-12 13:01:17 -04:00
Thomas Harte
a4ee697ed1
Quickie: head unload is scheduled only if the head is presently loaded.
2017-08-12 12:53:45 -04:00
Thomas Harte
0f15a2f97f
Relented: it actually looks like status bytes aren't per-drive. But each drive may fail at seeking individually. So that piece of state accumulates at the 8272 drive.
2017-08-12 12:52:36 -04:00
Thomas Harte
89ace671a4
Corrected unload time. Was 8000 times too short.
2017-08-12 09:44:01 -04:00
Thomas Harte
e7db2a2f6d
Sought to introduce head loading and unloading delays.
2017-08-12 09:36:21 -04:00
Thomas Harte
ffb1a14ace
Minor: clear status registers before a read data.
2017-08-11 18:56:33 -04:00
Thomas Harte
e4f04d0977
Merge branch 'master' into AYFidelity
2017-08-11 14:41:08 -04:00
Thomas Harte
a5593bec79
Threw in support for the light-pen trigger.
2017-08-10 15:00:14 -04:00
Thomas Harte
a1e2646301
Imposed counter size limits.
2017-08-10 14:58:24 -04:00
Thomas Harte
6a6e5ae79c
Forced users of the 6845 to be explicit about which type. So far with no effect.
2017-08-10 12:28:57 -04:00
Thomas Harte
02d792c003
Simplified logic slightly, avoiding repetition.
2017-08-10 11:48:37 -04:00
Thomas Harte
be8e7a4144
Eliminated false register aliasing, restricted register sizes and locked out reading and writing where appropriate.
2017-08-10 11:22:30 -04:00
Thomas Harte
b1dbd7833a
Merge branch 'master' into 6845Address
2017-08-10 11:15:08 -04:00
Thomas Harte
a4c910f1de
This appears to be a more accurate take on 6845 address advancement — it is necessary that character output has finished for the line address to be updated.
2017-08-10 11:12:53 -04:00
