Thomas Harte
902b33d25d
Makes more failing attempts at a clean shutdown.
2020-06-15 00:00:44 -04:00
Thomas Harte
ac732e2e7b
Attempts to ensure clean shutdown.
2020-06-14 23:38:44 -04:00
Thomas Harte
d08ffd6c8b
Makes sure the timer really, really is on a different thread.
...
Thereby allows me substantially to reduce audio latency.
2020-06-14 23:22:00 -04:00
Thomas Harte
79833deeaf
With some attempt at vsync prediction, seeks to smooth audio/video output.
...
There's plenty more work to do here, but hopefully it takes the issue immediately off the table.
2020-06-14 19:26:56 -04:00
Thomas Harte
405e9e7c68
Shunts audio into its own QThread.
...
For the record, this was the first means I found of attempting that which actually seemed to work. A plain QThread, with something `connect`ed to its `started` signal didn't seem to work (perhaps `connect` is smart at thread confinement?), `moveToThread` didn't work on the audio output after the fact, etc.
2020-06-10 22:14:54 -04:00
Thomas Harte
5f13ee7c19
Simplifies AudioBuffer by consolidating logic into writes.
...
This is kind of fiddling in the margins though; I'm having a lot of difficulty determining the semantically-correct way to get Qt not to funnel all activity through a single thread.
2020-06-09 23:56:08 -04:00
Thomas Harte
d9f02aecdf
Adds an additional buffer. To reduce latency. No, really.
...
Specifically: there's no way to guarantee no overbuffering due to the startup race, other than having QAudioOutput obtain data by pull rather than push. But if it's pulling then that implies an extra buffer. And since the sizes it may pull are not explicit, there's guesswork involved there.
So: no extra buffer => uncontrollable risk of over-buffering. Extra buffer => a controllable risk of over-buffering.
2020-06-09 00:01:22 -04:00
Thomas Harte
bcb23d9a15
Attempt to reduce audio latency. Unsuccessfully.
2020-06-08 21:30:35 -04:00
Thomas Harte
d027450502
Consolidates timer/thread ownership for the timer.
2020-06-07 00:31:46 -04:00
Thomas Harte
63ad1290f4
Actually, QIODevice is listed as reentrant. So no need to forward audio.
...
That said, latency is still absurd for some reason.
2020-06-06 23:47:57 -04:00
Thomas Harte
7c7cb61d2f
Corrects missing audio, at the cost of frame rate.
...
I'm now spinning on the ability of QAudioOutput to accept additional data.
2020-06-06 22:35:50 -04:00
Thomas Harte
68b165e244
QIODevice isn't guaranteed thread safe, so use of it is now thread confined.
2020-06-06 21:14:04 -04:00
Thomas Harte
fe1b6812f1
Fixes processing cap and attempts full-rate video output.
...
Audio now seems to be present, though hugely stuttered.
2020-06-06 19:47:35 -04:00
Thomas Harte
378ff39e5e
Makes an unsuccessful attempt at producing audio.
...
On the plus side, it does seem successfully to sniff out an appropriate audio format and to communicate mono/stereo onward.
2020-06-06 19:19:01 -04:00
Thomas Harte
e47cb91223
Pushes rudimentary keyboard input.
2020-06-05 23:06:28 -04:00
Thomas Harte
d62fb16a58
Adds an eventFilter, in order to steal keypresses.
2020-06-05 22:11:17 -04:00
Thomas Harte
235efcb2d4
Attempts to silence asserts, etc, for release builds.
2020-06-04 23:14:51 -04:00
Thomas Harte
a6ada129e8
Adds very low quality, race-condition infested video output.
2020-06-04 22:58:02 -04:00
Thomas Harte
a681576d6c
Adds redraw logic.
...
If you sit around and constantly reeize the window, you can now see that a machine is running.
2020-06-04 22:39:32 -04:00
Thomas Harte
fdc234ed3b
Advances to having a selected machine actually run.
...
Albeit, invisibly.
2020-06-03 23:39:16 -04:00
Thomas Harte
e2ceb77501
Attempts to start updating a started machine.
...
No real progress on graphics output though.
2020-06-03 00:21:37 -04:00
Thomas Harte
11c28357a1
Implements a basic ROM installation loop.
...
Albeit that I need to figure out how layouts work to keep that request view at least centred.
2020-06-02 23:35:01 -04:00
Thomas Harte
ba2a0600dc
Adds a basic Qt ROM fetcher and attempt to create a machine.
2020-06-01 23:14:57 -04:00
Thomas Harte
ab53165b34
Adds note on implementation obstacle.
2020-06-01 22:08:21 -04:00
Thomas Harte
a30723c3d4
Cleans up a little and ensures a safe exit of the timer thread.
2020-05-31 23:58:19 -04:00
Thomas Harte
d64b4fbc26
Adds a Qt timer class. Precision seems to be 'acceptable'.
2020-05-31 23:39:08 -04:00
Thomas Harte
5e0bea9d1c
Adds all header files to the QMake project.
2020-05-30 16:48:52 -04:00
Thomas Harte
48afc54af6
Cuts down unused parameter warnings to just a few that may well indicate implementation errors.
2020-05-30 01:06:43 -04:00
Thomas Harte
d066dd2b44
Resolves further unused parameter warnings.
...
Also adds warning to Xcode build, for better symmetry with Qt defaults.
2020-05-30 00:58:10 -04:00
Thomas Harte
0bf7de9d43
Advances to actually completing a build.
...
Many more warnings to iron out, however.
2020-05-30 00:47:43 -04:00
Thomas Harte
267006782f
Starts to add Qt target; resolves many build warnings.
2020-05-30 00:37:06 -04:00
Thomas Harte
512a52e88d
Increases const correctness, marks some additional constructors as constexpr, switches std::atomic construction style.
2020-05-20 23:34:26 -04:00
Thomas Harte
ff3c2fdc59
Adds 68000 state to SConstruct.
2020-05-16 18:33:36 -04:00
Thomas Harte
8b76d4007e
Starts adding State for the 68000.
2020-05-14 22:46:40 -04:00
Thomas Harte
80f2836cb8
Adds Z80 state to SConstruct.
2020-05-13 22:05:23 -04:00
Thomas Harte
7c9d9ee048
Adds basic Z80 state.
2020-05-13 20:15:22 -04:00
Thomas Harte
6dc7a4471d
Removes unused .cpp file.
2020-05-09 23:43:05 -04:00
Thomas Harte
25996ce180
Further doubles down on construction syntax for type conversions.
2020-05-09 23:00:39 -04:00
Thomas Harte
3729bddb2a
Farewell, BestEffortUpdater.
2020-05-09 21:48:04 -04:00
Thomas Harte
4136428db3
Removes dead StandardOptions.cpp.
2020-05-09 21:35:15 -04:00
Thomas Harte
4c6d0f7fa0
Corrects SConstruct; applies default initialisation in Struct.cpp.
2020-05-09 18:11:50 -04:00
Thomas Harte
40b60fe5d4
Renames folder as per intended scope.
2020-05-09 18:04:11 -04:00
Thomas Harte
303965fbb8
Removes the crutch of my first-attempt implementation.
2020-05-08 20:53:34 -04:00
Thomas Harte
0505b82384
Restores top bit of channel period, propagates it to the envelope generator.
2020-05-05 00:28:24 -04:00
Thomas Harte
386a7ca442
Continues doing away with the attempt heavily to interleave the OPLL and OPL2, creating a new OPLL class.
2020-05-04 21:14:51 -04:00
Thomas Harte
94614ae4c3
Shifts the LFO implementation inline.
2020-05-03 21:44:22 -04:00
Thomas Harte
1223c99e0f
Adds waveform generation logic to the new factoring.
2020-05-03 21:38:20 -04:00
Thomas Harte
1ff5ea0a6e
Adds KeyLevelScaler, implements EnvelopeGenerator, adds reset to PhaseGenerator.
2020-05-03 16:24:55 -04:00
Thomas Harte
9d2691d1d2
Taking it as given that outstanding deficiencies are mostly due to poor design, starts breaking out the envelope and phase generators.
2020-05-01 23:46:42 -04:00
Thomas Harte
5896288edd
Adapts to new interface.
2020-04-29 22:08:36 -04:00
Thomas Harte
f899af0eef
Fixes OPL tests.
2020-04-28 20:17:16 -04:00
Thomas Harte
6d4e29c851
Strips mixer back to basics in search of audio issues.
2020-04-24 23:32:02 -04:00
Thomas Harte
9e3614066a
Adds tremolo support, switches to global timer for ADSR stages other than attack.
2020-04-23 23:55:49 -04:00
Thomas Harte
32fd1897d0
Via a unit test, confirms and fixes relative volumes of OPLL channels.
...
Also rejigs responsibility for scaling to emulator-standard volume.
2020-04-20 23:17:29 -04:00
Thomas Harte
39e6a28730
Rearranges file.
2020-04-20 19:41:04 -04:00
Thomas Harte
3852e119aa
Adds test data for FM wave generation.
2020-04-20 19:33:03 -04:00
Thomas Harte
99fa86a67e
Adds a test for lookup sine. And fixes lookup sine.
2020-04-20 18:40:47 -04:00
Thomas Harte
c54bbc5a04
Rename Table.h; LogSin -> LogSign and make it a bit more typer.
2020-04-19 13:33:17 -04:00
Thomas Harte
0aceddd088
Starts tidying up the OPL2.
...
This is as a precursor to switching to using the proper table lookups, which I hope will automatically fix my range issues.
2020-04-15 22:10:50 -04:00
Thomas Harte
a7e63b61eb
Just from printing numbers: corrects transition from attack to decay.
2020-04-15 00:26:01 -04:00
Thomas Harte
b13b0d9311
Starts towards implementing some OPL test cases.
2020-04-14 23:51:45 -04:00
Thomas Harte
d9e41d42b5
Adds the OPL2 to SConstruct.
2020-04-05 21:34:19 -04:00
Thomas Harte
b0abc4f7bb
Implements enough wiring that the Master System will instantiate and talk to an OPLL.
2020-04-03 20:05:36 -04:00
Thomas Harte
e4d4e4e002
Adds 6502 State to the SConstruct file.
...
On the assumption I'll actually use it at some point.
2020-04-02 19:16:22 -04:00
Thomas Harte
dfc1c7d358
Separates 6502 State object to make it optional.
...
Also makes a few minor const improvements while I'm poking around.
2020-04-02 19:11:27 -04:00
Thomas Harte
f417fa82a4
Splits 'CRTMachine' into three parts: ScanProducer, AudioProducer, TimedMachine.
...
Simultaneously cleans up some of the naming conventions and tries to make things a bit more template-compatible.
2020-04-01 23:19:34 -04:00
Thomas Harte
5fd2be3c8e
Makes a genuine attempt at five and three decoding.
2020-03-25 20:50:26 -04:00
Thomas Harte
cfca3e2507
Adds missing header for std::setw, std::set fill.
2020-03-23 21:26:50 -04:00
Thomas Harte
fcdc1bfbd0
Prints the CRC32(s) of any missing ROMs.
2020-03-23 20:00:13 -04:00
Thomas Harte
0e502f6d5c
Ensures the macOS version retains volume.
2020-03-23 00:10:56 -04:00
Thomas Harte
bd1b4b8a9f
Increases volume fade-out speed.
2020-03-22 21:13:55 -04:00
Thomas Harte
38d81c394f
Switches OSAtomics to stdatomics. The former were deprecated by macOS 10.12.
2020-03-22 21:11:04 -04:00
Thomas Harte
72103a4adb
Corrects execution cap for splitAndSync ticks.
2020-03-22 19:25:02 -04:00
Thomas Harte
e6bae261c4
Ensures volume controls appear for mouse-capture machines when not capturing.
2020-03-22 19:06:38 -04:00
Thomas Harte
5edb0c0ee7
Adds animated fade-out to volume control. Bumps macOS version to 10.12.2.
2020-03-22 18:45:24 -04:00
Thomas Harte
442ce403f9
It's a bit jarring, but ensures volume control shows and hides according to mouse cursor.
2020-03-22 16:25:07 -04:00
Thomas Harte
7398cb44e2
Adds a functioning volume control for macOS, it just doesn't know how to hide yet.
2020-03-22 13:24:23 -04:00
Thomas Harte
15d54dfb4c
Adds 'volume' command-line parameter for kiosk mode.
2020-03-21 22:24:31 -04:00
Thomas Harte
0c689e85a5
Use screen number for spotting screen changes.
...
NSScreen implements Swift Equatable but doesn't seem officially to implement -isEqual:.
2020-03-21 17:01:57 -04:00
Thomas Harte
5a1bae8a9c
Ensures proper NSScreen comparison, and no never-ending setupDisplayLink loop on exit.
2020-03-20 23:00:16 -04:00
Thomas Harte
69277bbb27
Renames files to match project convention.
2020-03-19 23:24:06 -04:00
Thomas Harte
b8b335f67d
Exposes the Master System's region for SDL selection.
2020-03-19 21:46:42 -04:00
Thomas Harte
eef7868199
Ensures 'new' overrides default selection; doesn't try to propagate multiple files if machines won't take them.
2020-03-19 21:15:38 -04:00
Thomas Harte
c1b69fd091
Attempts to support multiple pieces of media on the SDL command line, ensures proper window titling.
2020-03-19 20:40:43 -04:00
Thomas Harte
b8ebdc012f
Ensure normative construction declaration ordering.
2020-03-19 18:58:36 -04:00
Thomas Harte
9995d776de
Attempts to fix the macOS version, plus some implicit type conversions.
2020-03-18 23:29:09 -04:00
Thomas Harte
c6f35c9aac
Rejigs help output.
2020-03-18 23:11:25 -04:00
Thomas Harte
615ea2f573
Applies parsed arguments.
2020-03-18 22:31:32 -04:00
Thomas Harte
a7e1920597
Restores ColecoVision runtime options.
2020-03-18 00:06:52 -04:00
Thomas Harte
f9ca443667
Adds the ability for reflective structs to limit the permitted values to enumerated properties.
2020-03-17 21:44:04 -04:00
Thomas Harte
394ee61c78
Starts a switch to reflectable-style runtime options.
...
The Amstrad CPC and ZX80/81 have made the jump so far, subject to caveats. The macOS build is unlikely currently to work properly.
2020-03-16 23:25:05 -04:00
Thomas Harte
8e3bf0dbca
Starts moving towards a Deflectable-based system of runtime options.
2020-03-15 23:48:53 -04:00
Thomas Harte
2031a33edf
Technically SDL users can now start a new machine.
...
Missing though: all the old per-machine command-line options, and any control over the new one.
2020-03-15 21:50:43 -04:00
Thomas Harte
fc3d3c76f8
Edges further towards providing enough information for dynamic user-provided machine creation.
2020-03-15 12:54:55 -04:00
Thomas Harte
f9c8470b20
Ensure targets always nominate a machine.
2020-03-15 00:13:38 -04:00
Thomas Harte
cab4bead72
Promotes explicit specialisations to namespace scope.
2020-03-13 23:38:29 -04:00
Thomas Harte
1a2872c815
Starts to build an easy set interface.
2020-03-13 22:42:37 -04:00
Thomas Harte
52f644c4f1
Ensures that reflection is completely blind; starts adding SDL instantiation logic.
2020-03-12 20:56:02 -04:00
Thomas Harte
044a2b67e1
Beefs up documentation on this miniature sort-of reflection.
2020-03-11 23:03:05 -04:00
Thomas Harte
ce80825abb
Starts working towards a registration-based model of reflective enums.
2020-03-11 23:03:05 -04:00
