Thomas Harte
d97a073d1b
Adds the necessary routine for all machines to be able to respond to get_scan_status.
...
They all just as the CRT, as all are currently based on the CRT. Which doesn't currently know the total clock rate it would need to in order properly to scale the answer to the question. Further thought coming.
2020-01-20 21:45:10 -05:00
Thomas Harte
c755411636
Slightly improves comments.
2020-01-19 20:05:22 -05:00
Thomas Harte
d674fd0e67
The WD uses only the low two bits for sector size.
2020-01-18 13:40:50 -05:00
Thomas Harte
aac3d27c10
Adds activity indicators for the BD-500 and Jasmin.
...
Also slightly cleans up DiskController a little further.
2020-01-15 23:39:15 -05:00
Thomas Harte
2d233b6358
Makes a more concrete attempt at track/sector combination.
2020-01-12 22:18:31 -05:00
Thomas Harte
6a44936a7c
Ensures programmatic volume level 0 is completely off.
2020-01-05 22:44:52 -05:00
Thomas Harte
c1bae49a92
Standardises on read and write for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
153f60735d
Banishes redefined macro warning.
2020-01-01 12:38:30 -05:00
Thomas Harte
e59de71d79
Disables status logging, at least until next needed.
2019-12-24 21:44:50 -05:00
Thomas Harte
4205e95883
Switches to capture of the track 0 flag during a type 1 operation.
2019-12-24 21:43:20 -05:00
Thomas Harte
dfa6b11737
Adds responsibility for an ongoing index pulse to the drive.
2019-12-24 20:53:37 -05:00
Thomas Harte
42926e72cc
Adjusted: Flag::WriteProtect works in real time for a type-1 status.
2019-12-24 19:57:12 -05:00
Thomas Harte
80cb06eb33
It provisionally seems as though spin_up should be reset by a force interrupt?
2019-12-24 19:37:37 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
ac604b30f3
Eliminates dangling static_casts in favour of construction.
2019-12-22 20:59:20 -05:00
Thomas Harte
b035b92f33
Corrects accidental use of sector contents as addresses in multi-sector reads and writes.
...
As a secondary defect, this was also causing erroneous CRC error reports.
2019-12-22 19:58:02 -05:00
Thomas Harte
d25b48878c
Cleans up READ_ID macro, inter alia.
2019-12-22 17:58:33 -05:00
Thomas Harte
274867579b
Deploys constexpr as a stricter const.
2019-12-22 00:22:17 -05:00
Thomas Harte
a847654ef2
Corrects various old-fashioned bits of indentation, plus the odd const.
2019-12-22 00:00:23 -05:00
Thomas Harte
57ce10418f
Switches prescale logic, the better to deal with changes in prescaler.
...
According to my assumptions about the behaviour, anyway.
2019-12-20 23:33:14 -05:00
Thomas Harte
2a1520c04e
Removes mostly-uninformative piece of logging.
2019-12-19 22:58:28 -05:00
Thomas Harte
206ab380c7
Introduces double-resolution envelopes for the Atari ST.
2019-12-18 22:03:02 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
c2646a415f
Switch to faster timer implementation; it seems to work.
2019-12-09 19:23:08 -05:00
Thomas Harte
7cd11ecb7f
Adds necessary #include for assert.
2019-12-08 22:43:39 -05:00
Thomas Harte
acfe2c63b8
Adds an assert to verify the interrupt line is clear after a full reset.
2019-12-08 22:34:19 -05:00
Thomas Harte
b192381928
Implements a fuller reset, takes a run at the overran flag.
2019-12-08 21:20:06 -05:00
Thomas Harte
7ff57f8cdf
Starts to flesh out documentation.
2019-11-19 22:32:07 -05:00
Thomas Harte
06edeea866
Adds reload during event count mode.
...
Plus a helpful bit of TODO.
2019-11-19 22:24:32 -05:00
Thomas Harte
e0ceab6642
Pivots towards looking at Timer B as a cause of in-frame inaccuracy.
2019-11-19 21:52:50 -05:00
Thomas Harte
0ce5057fd9
Attempts to factor in event counting direction.
2019-11-18 22:37:20 -05:00
Thomas Harte
6ec3c47cc0
Ensures same-level interrupts don't double trigger.
2019-11-12 22:18:13 -05:00
Thomas Harte
d6edfa5c6d
Removes the redundant state encased within interrupt_causes_.
2019-11-11 21:49:02 -05:00
Thomas Harte
072b0266af
It seems status reads are not required to clear the interrupt line.
2019-11-09 20:12:09 -05:00
Thomas Harte
5fc4e57db7
Eliminates non-portable use of fls.
2019-11-09 16:03:00 -05:00
Thomas Harte
e3abbc9966
Renames what didn't end up being a whole SerialPort.
2019-11-09 15:21:51 -05:00
Thomas Harte
8c736a639a
Eliminates unexpected bottleneck created by ACIA.
2019-11-09 15:00:12 -05:00
Thomas Harte
14e790746b
Fixes return value when reading received data.
2019-11-02 21:25:00 -04:00
Thomas Harte
75e34b4215
Reacts to no acknowledgement.
2019-10-31 21:00:05 -04:00
Thomas Harte
a5bbf54a27
Adds the ability for the 68901 to decline an interrupt acknowledgement.
2019-10-31 19:57:36 -04:00
Thomas Harte
731dc350b4
Adds sometime real-time clocking for DMA.
2019-10-30 22:59:32 -04:00
Thomas Harte
635e18a50d
Ensures the MFP requests and receives real-time clocking when needed.
2019-10-30 22:42:06 -04:00
Thomas Harte
4857ceb3eb
Attempts to get a bit more systematic.
...
Spotted that interrupt_enable_ isn't being used properly while doing so, hopefully that's now correct.
2019-10-29 23:16:08 -04:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
fd02b6fc18
Corrects in-service test; adds pending clearing upon enabled clearing.
2019-10-28 22:51:00 -04:00
Thomas Harte
553f3b6d8b
Properly conforms to GPIP input/output blending.
2019-10-28 22:37:11 -04:00
Thomas Harte
a5057e6540
Ensures that stop means stop.
2019-10-28 22:12:45 -04:00
Thomas Harte
aa52652027
Adds a const.
2019-10-28 21:21:35 -04:00
Thomas Harte
5f6711b72c
Ensures interrupt changes are notified to the delegate.
2019-10-28 21:13:06 -04:00
Thomas Harte
de1bfb4e24
Stores and returns timer configuration.
2019-10-27 22:38:49 -04:00
