Thomas Harte
|
c84004bfa3
|
Fixed: colour_cycle_numerator_ doesn't need to be multiplied by the time multiplier because it'll get that for free from the calculation of next_run_length.
|
2017-01-06 21:36:19 -05:00 |
|
Thomas Harte
|
c746a3711f
|
Temporarily disabled my attempt to be clever with bilinear filtering when applying a lowpass filter. Will need to investigate.
|
2017-01-04 08:06:18 -05:00 |
|
Thomas Harte
|
aa7774a9a6
|
Experimental: up the chroma accuracy, just let the luma go straight through. Subject to figuring out how I'm still losing so much precision.
|
2017-01-03 22:41:34 -05:00 |
|
Thomas Harte
|
a836120945
|
Restored proper colour separation, but somewhere a massive hit in horizontal resolution is happening — much greater than one would expect from the sample size picked. So investigation to come.
|
2017-01-03 22:32:07 -05:00 |
|
Thomas Harte
|
7d60df9075
|
Added the option for both intermediate and output shaders to use only a portion of the input/output texture; made an attempt to pick an appropriate proportion in order to align signal sampling with the colour subcarrier.
|
2017-01-03 22:16:52 -05:00 |
|
Thomas Harte
|
f2b8b26bc4
|
Started throwing some comments into my shaders.
|
2017-01-03 21:16:38 -05:00 |
|
Thomas Harte
|
34d213dec4
|
Decreased Y resolution, again also hopefully temporarily.
|
2016-12-10 15:35:38 -05:00 |
|
Thomas Harte
|
81a102d951
|
Upped intermediate buffer size, at least temporarily, while I look for the source of the interference patterns I'm seeing.
|
2016-12-10 15:20:10 -05:00 |
|
Thomas Harte
|
0e71802b92
|
Reduced Oric video to single nibble constants. Removed attempt at asynchronous flush as no longer required.
|
2016-12-10 14:17:46 -05:00 |
|
Thomas Harte
|
a549fd1ecc
|
Introduced the ability simply to piggy-back off the CRT's natural phase for the colour burst, thereby eliminating a couple of redundant independent attempts in the Oric and Electron.
|
2016-12-10 13:42:34 -05:00 |
|
Thomas Harte
|
5216dda675
|
Added some brief extra exposition to the texture builder, cut all internal tex_x/y and source_divider stuff from the CRT.
|
2016-12-06 19:08:55 -05:00 |
|
Thomas Harte
|
33d52bb573
|
Ensured no over-moving.
|
2016-12-06 19:02:18 -05:00 |
|
Thomas Harte
|
4ff33254e1
|
Sought to shift locking back up to the CRT. And to be a bit more RAII-ish.
|
2016-12-06 18:48:30 -05:00 |
|
Thomas Harte
|
60f9ddfde8
|
Fixed start test and added incrementation of start locations.
|
2016-12-06 08:08:57 -05:00 |
|
Thomas Harte
|
f388ba11cc
|
Missed an initialisation. Fixed!
|
2016-12-06 07:26:23 -05:00 |
|
Thomas Harte
|
0fee8096c1
|
Made an attempt to shuffle the texture builder to a similar flush/submit pattern as the input builder. Don't care about thread safety yet, as it's obvious I'm going to need to move that back up to the CRT.
|
2016-12-06 07:24:07 -05:00 |
|
Thomas Harte
|
0edc043378
|
Started introducing an extra layer of indirection so as to be able to bind the texture builder to the same flush and submit patern as the array builder.
|
2016-12-03 20:47:19 -05:00 |
|
Thomas Harte
|
cb3c837e30
|
Simplified interface by baking in last-minute-only updates.
|
2016-12-03 18:19:12 -05:00 |
|
Thomas Harte
|
0220d33562
|
Resolved failure of initial state setting, which was causing tests sometimes to fail.
|
2016-12-03 16:42:10 -05:00 |
|
Thomas Harte
|
c5016a3eaa
|
Completed flight of 'Outputs' to postfix underscores.
|
2016-12-03 11:02:34 -05:00 |
|
Thomas Harte
|
7c85cb62e4
|
Moved underscores, removed indirections where they're not necessary, converted those names that were still looking very Objective-C and moved the GL fence variable into the private area, where it should always have been.
|
2016-11-21 12:14:52 +08:00 |
|
Thomas Harte
|
bc03e12dc5
|
Switched to suffix underscores.
|
2016-11-21 11:57:45 +08:00 |
|
Thomas Harte
|
340607e13e
|
Switched the flywheel to suffix underscores.
|
2016-11-21 11:48:31 +08:00 |
|
Thomas Harte
|
e1285028aa
|
Removed a redundant clear and some dead code.
|
2016-11-21 11:42:45 +08:00 |
|
Thomas Harte
|
7b38247ab3
|
Updated outdated comments.
|
2016-11-21 11:40:13 +08:00 |
|
Thomas Harte
|
d7d0ed378a
|
Only the final intermediate buffer needs clearing, on reflection.
|
2016-11-21 11:26:07 +08:00 |
|
Thomas Harte
|
c89345c639
|
Reduced buffer size.
|
2016-11-21 11:21:14 +08:00 |
|
Thomas Harte
|
32dbfe947d
|
With hindsight, the elimination of this might have been overzealous.
|
2016-11-20 10:53:35 +08:00 |
|
Thomas Harte
|
ef0367d4a4
|
Corrected typo.
|
2016-11-20 09:12:43 +08:00 |
|
Thomas Harte
|
5bc165960a
|
Completed refactoring.
|
2016-11-20 09:12:06 +08:00 |
|
Thomas Harte
|
fda90c5aef
|
Documented.
|
2016-11-20 09:11:24 +08:00 |
|
Thomas Harte
|
c2349ee3f4
|
This thing has clearly becoma a real class.
|
2016-11-19 20:12:40 +08:00 |
|
Thomas Harte
|
7857ef774f
|
Ensured resets genuinely kill outstanding data.
|
2016-11-19 20:09:38 +08:00 |
|
Thomas Harte
|
a4c7b00ecd
|
Fixed code that was causing the failing test.
|
2016-11-19 19:55:30 +08:00 |
|
Thomas Harte
|
f59537bce9
|
Added a testing hook, but as of yet no tests.
|
2016-11-17 14:06:16 +08:00 |
|
Thomas Harte
|
aca1fa0577
|
Returned some video output. Enough significantly to reduce my paranoia.
|
2016-11-17 13:37:53 +08:00 |
|
Thomas Harte
|
1f91d29434
|
Progressed to usage of an array builder and a texture builder up to the point of a successful build.
|
2016-11-17 12:26:04 +08:00 |
|
Thomas Harte
|
0f3b02edb7
|
Switched to postfix underscores and gave this class ownership of a texture builder and an array builder, though it presently uses neither.
|
2016-11-17 11:00:11 +08:00 |
|
Thomas Harte
|
57f0648742
|
Fleshed out first implementation of ArrayBuilder, albeit that I need to implement exhaustion properly, as soon as I think of a sensible way to handle synchronisation.
|
2016-11-17 10:39:30 +08:00 |
|
Thomas Harte
|
324a1de43d
|
Started pulling out array construction as a separate task.
|
2016-11-17 09:20:49 +08:00 |
|
Thomas Harte
|
c04a116a05
|
Fixed comment.
|
2016-11-16 23:14:56 +08:00 |
|
Thomas Harte
|
edeafd4d94
|
Wait, OpenGL textures go the other way.
|
2016-11-16 23:14:15 +08:00 |
|
Thomas Harte
|
6ac20e0066
|
Pushed responsibility for submitting texture contents up to the texture builder, simplifying the interface.
|
2016-11-16 23:13:06 +08:00 |
|
Thomas Harte
|
5c5e44874f
|
Even better: why include the 'Input' prefix when there's only one?
|
2016-11-16 22:57:17 +08:00 |
|
Thomas Harte
|
04b2688683
|
Attempted to reduce allocations.
|
2016-11-16 13:25:50 +08:00 |
|
Thomas Harte
|
c1a509910d
|
Documented this interface, albeit that the English could do with a second pass, and very sightly simplified inline with current usage.
|
2016-11-16 13:15:50 +08:00 |
|
Thomas Harte
|
4d0d5eb919
|
Renamed the 'input buffer builder' to the 'input texture builder' to be explicit about what sort of buffer, and killed the prefix since it's namespaced. Also switched to std::vector.
|
2016-11-16 12:31:32 +08:00 |
|
Thomas Harte
|
4ee4400801
|
Removed dead code.
|
2016-11-16 11:57:22 +08:00 |
|
Thomas Harte
|
6cb4950db4
|
Improved run-off area.
|
2016-11-16 11:53:15 +08:00 |
|
Thomas Harte
|
9ee11d7765
|
At the expense of API simplicity, at least for now, resolved the most glaring cause of dirty lines.
|
2016-11-16 11:34:05 +08:00 |
|
Thomas Harte
|
44d3fd6d5b
|
Fixed mistimed reset of the target output line. Now all that's left is occasional noise.
|
2016-11-16 11:22:12 +08:00 |
|
Thomas Harte
|
7a737e0790
|
Both pathways start with a buffer that clears to black. So no need to keep going on about it.
|
2016-11-16 11:12:08 +08:00 |
|
Thomas Harte
|
f63e849092
|
Sought completely to eliminate the outgoing concept of 'clearing zones'.
|
2016-11-16 11:10:34 +08:00 |
|
Thomas Harte
|
294adde344
|
Eliminated zoned clearing, in favour of a complete buffer clear on each load and attempted to reduce locking. But imperfectly.
|
2016-11-16 10:59:12 +08:00 |
|
Thomas Harte
|
ccedb6bea6
|
Introduced an intermediate buffer that collects lines before flushing them to the output buffer.
|
2016-11-16 10:49:18 +08:00 |
|
Thomas Harte
|
ba2adf8bb1
|
Normalised on std::vector rather than std::unique_ptr<uint8_t *> as (probably?) more idiomatic. Improved structure slightly. Introduced a container for line data, albeit one that isn't yet used.
|
2016-11-16 10:34:54 +08:00 |
|
Thomas Harte
|
9c550c594a
|
Moved audio work back into its own thread, but this time it queues up an all happens only upon a flush. Hopefully to resolve synchronisation cost concerns.
|
2016-11-09 21:17:50 -05:00 |
|
Thomas Harte
|
eccfdabeab
|
Temporarily disabled thread hop, until I can find a way to batch these things.
|
2016-11-03 22:52:02 -04:00 |
|
Thomas Harte
|
4258401384
|
Implemented flush, added a call to it from the filter speaker's destructor, to ensure no race conditions on accessing the various bits of instance state there and below.
|
2016-10-19 21:15:04 -04:00 |
|
Thomas Harte
|
c628b7c5c5
|
This is the real PAL frequency, I think.
|
2016-10-17 08:05:02 -04:00 |
|
Thomas Harte
|
1f857c619b
|
Fixed timing issues. Static box of frame achieved!
|
2016-10-12 21:42:36 -04:00 |
|
Thomas Harte
|
00e3ad9b04
|
Added a bit more ceiling for lowpass filtering on constrained machines.
|
2016-10-10 07:51:01 -04:00 |
|
Thomas Harte
|
e53455a936
|
Not having read the C++ synchronisation primitives before, this async task queue is probably incorrect. But nevertheless, let's have a quick go at employing it — in a hideously thread unsafe fashion — for audio generation. What can possibly go wrong?
|
2016-10-07 16:56:34 -04:00 |
|
Thomas Harte
|
dab3580111
|
Experimental: can I afford a lower sampling rate if there's a low-pass filter in effect?
|
2016-08-22 22:18:05 -04:00 |
|
Thomas Harte
|
1541273785
|
Moved responsibility for throwing in a low-pass filter up to the Vic, appropriately.
|
2016-08-21 18:13:31 -04:00 |
|
Thomas Harte
|
c783090980
|
It turns out that the Vic has a 1.6Khz low-pass filter. So added that.
|
2016-08-21 12:13:41 -04:00 |
|
Thomas Harte
|
fef316932f
|
Moved opening bracket appropriately.
|
2016-07-04 21:14:28 -04:00 |
|
Thomas Harte
|
8db44eed3e
|
Added a default implementation of Speaker::skip_samples.
|
2016-07-04 20:48:27 -04:00 |
|
Thomas Harte
|
2bc87ee095
|
Merge branch 'master' of github.com:TomHarte/CLK
|
2016-07-01 16:28:18 -04:00 |
|
Thomas Harte
|
eefd0c17b6
|
Actually, I guess that to fulfil the contract I can't silently decide not to draw if I'm being told I definitely need to draw.
|
2016-07-01 16:27:45 -04:00 |
|
Thomas Harte
|
ed8f4d0476
|
Added some minor additional bits of documentation.
|
2016-06-30 08:46:29 -04:00 |
|
Thomas Harte
|
4ac619f569
|
glClientWaitSync appears to be a busy wait, at least on my machine. But why wait indefinitely anyway?
|
2016-06-29 21:32:47 -04:00 |
|
Thomas Harte
|
ff53accca0
|
Demonstrated that issue is coloured borders, made a guess as to buffer exhaustion, upped limits as a temporary fix.
|
2016-06-29 21:16:34 -04:00 |
|
Thomas Harte
|
2bd71e7e9b
|
.reset is the more normal way to reassign a unique_ptr.
|
2016-06-23 20:52:44 -04:00 |
|
Thomas Harte
|
c18cc4c8f5
|
It appears the Vic's output is sine-ish, after all. Also adjusted centre of display, simultaneously adding some validation on that.
|
2016-06-14 07:29:35 -04:00 |
|
Thomas Harte
|
fcf4b14344
|
Extended to allow floating-point sampling rates. Which makes sense.
|
2016-06-13 19:30:41 -04:00 |
|
Thomas Harte
|
2992183aae
|
Switched to a lookup table for phase, temporarily in YUV colour space, probably. Working on it.
|
2016-06-12 14:39:17 -04:00 |
|
Thomas Harte
|
68a8851c52
|
Increased parallelism, allowing a simplification in the GL view.
|
2016-06-02 22:29:09 -04:00 |
|
Thomas Harte
|
1e0fcbbee8
|
Made a very basic stab at a couple of the tone generators, added straight-through path for the speaker when input rate exactly equals output rate.
|
2016-06-01 19:53:16 -04:00 |
|
Thomas Harte
|
5c4f35e13f
|
Finally started on generalising the C++ stuff so as to be able to be able to get a working audio binding on the OS-specific side without further repetition by factoring an appropriate protocol out from the Electron and sketching out the correct speaker class for the Atari. Added a method to ask it what a good output frequency would be.
|
2016-05-31 21:23:44 -04:00 |
|
Thomas Harte
|
4ad074fc78
|
Introduced a four-cycle delay between playfield fetch and display, curing Yar's Revenge. Also disabled barrel roll scanling colouring again. I really need to make my mind up on that.
|
2016-05-16 19:55:56 -04:00 |
|
Thomas Harte
|
9d92ad659f
|
Established the basic timing loop, albeit without clocking delays yet.
|
2016-05-16 08:01:29 -04:00 |
|
Thomas Harte
|
00a2b42080
|
Made thread-safe.
|
2016-05-15 15:19:52 -04:00 |
|
Thomas Harte
|
091516e3cb
|
The semantics might need better exposition but: fixed UniformXfv calls plus matrix calls, documented new semantics on all setters.
|
2016-05-15 14:59:59 -04:00 |
|
Thomas Harte
|
328fabcd10
|
Ensured values aren't dangling pointers.
|
2016-05-14 18:15:10 -04:00 |
|
Thomas Harte
|
492dc7ccbf
|
Made an attempt to queue uniform changes until the next call to bind. That's to allow usage from other threads.
|
2016-05-14 18:06:55 -04:00 |
|
Thomas Harte
|
30f335fa35
|
Switched pervasively to using the named slot uniform setters on Shader.
|
2016-05-13 22:08:32 -04:00 |
|
Thomas Harte
|
8d52765f40
|
Realised why new shaders weren't taking. Very negligibly decreased Atari drawing cost.
|
2016-05-12 22:22:24 -04:00 |
|
Thomas Harte
|
6d65bc9b3a
|
Permitted a wider error window on vertical sync, tidied things up a little and started trying to move towards full implementation of the OpenGL contract.
|
2016-05-11 22:11:01 -04:00 |
|
Thomas Harte
|
4b3c4082d2
|
These functions appear correctly to model the NTSC and PAL palettes; the CRT's attempt to switch function doesn't work properly yet though.
|
2016-05-11 21:07:18 -04:00 |
|
Thomas Harte
|
a8ce021136
|
Fixed comment.
|
2016-05-10 19:59:03 -04:00 |
|
Thomas Harte
|
0d2d6a452d
|
Fixed some dangling buffer management issues.
|
2016-05-10 19:55:34 -04:00 |
|
Thomas Harte
|
b6d2c8cb63
|
Switched to instaced drawing for source[/intermediate] runs too, reducing that data transfer footprint by 50%.
|
2016-05-10 19:50:12 -04:00 |
|
Thomas Harte
|
7369139f7e
|
Realised that phase time can fit inside a single byte, since it's always (well) within the first quarter of the line — and if it somehow weren't (?) then taking it modulo the frequency would do.
|
2016-05-10 19:14:57 -04:00 |
|
Thomas Harte
|
47ae402f7e
|
Introduced a shorthand for setting up array attributes.
|
2016-05-10 19:11:48 -04:00 |
|
Thomas Harte
|
257420b0f7
|
Fixed potential output error if buffer top were hit; clarified buffer size constants.
|
2016-05-10 19:04:03 -04:00 |
|
Thomas Harte
|
309313c470
|
Update CRTConstants.hpp
Lack of data duplication means this storage can be smaller.
|
2016-05-10 10:49:48 -04:00 |
|
Thomas Harte
|
1d0bcb416d
|
Dropped the size per output run back down to 8 bytes.
|
2016-05-10 07:47:47 -04:00 |
|
Thomas Harte
|
b0f0315f12
|
Fixed: this now implements 12-byte instancing for output runs.
|
2016-05-10 07:30:12 -04:00 |
|
Thomas Harte
|
86dab3a5d6
|
Quickest first attempt to switch to instancing for the output array. Texture coordinates seem to be off.
|
2016-05-10 07:23:47 -04:00 |
|