Thomas Harte
c11fe25537
Merge branch 'master' into EnchantedWoods
2019-12-30 23:32:45 -05:00
Thomas Harte
0a12893d63
Shunts vsync back down to top of frame.
...
It's guess after guess, basically.
2019-12-30 23:01:31 -05:00
Thomas Harte
8e777c299f
Switches to latching video interrupts until acknowledged.
...
Seems to fix Cisco Heat, at least. I have no idea whether I'm latching the correct thing, whether IACK should clear both or only one, etc.
2019-12-30 23:00:55 -05:00
Thomas Harte
e23d1a2958
Restores vsync active.
2019-12-29 22:03:36 -05:00
Thomas Harte
6449403f6a
Corrects pending_events_ test for sequence points.
...
Simplifies around as possible.
2019-12-29 21:53:45 -05:00
Thomas Harte
c8fe66092b
Attempts to correct insertion logic (and mostly bypasses it).
2019-12-29 21:42:41 -05:00
Thomas Harte
b33218c61e
Fixes reload test, which really needs to sense the CRT-headed vsync output.
...
i.e. not the one heading back to the CPU.
2019-12-29 20:55:34 -05:00
Thomas Harte
8ce26e7182
Adds a delay on vsync visibility (i.e. as to generating an interrupt).
2019-12-29 19:03:08 -05:00
Thomas Harte
47068ee081
Ensures visible hsync end generates a sequence point.
2019-12-29 17:51:50 -05:00
Thomas Harte
214b6a254a
Adds a delay on visibility of the hsync signal, and a test on address reload.
2019-12-29 17:37:09 -05:00
Thomas Harte
93f6964d8a
Introduces some preliminary line length unit tests.
...
Thereby fixes one potential issue with load_ toggling.
2019-12-28 22:50:34 -05:00
Thomas Harte
13f11e071a
Simplifies border colour change propagation.
...
I'm not sure it was even technically correct as was.
2019-12-28 10:45:10 -05:00
Thomas Harte
f7825dd2a2
Pulls out address reload position as a separate constant.
2019-12-28 10:36:50 -05:00
Thomas Harte
a9d1f5d925
Pulls out address reload as something I can position independently.
...
Sadly receding it by 3 did not have the effect I was hoping for, of receding Enchanted Land's first register tweaking.
2019-12-27 23:47:19 -05:00
Thomas Harte
2757e5d600
Removes untrue comment.
2019-12-27 22:51:11 -05:00
Thomas Harte
5026de9653
Rejigs the video stream to ensure shifter really is continuous.
...
... and definitively to avoid potential buffer overruns. Or, at least, to have a mechanism in place definitively to avoid them. Which will be tested and debugged as necessary.
Also simplifies the colour burst and border/pixels selection logic.
2019-12-27 22:47:34 -05:00
Thomas Harte
5fa8e046d8
It's inaccurrate to call this _the_ shifter. So don't.
2019-12-27 19:03:10 -05:00
Thomas Harte
a9a92de954
Adds a bunch of shout-outs for unimplemented behaviour.
2019-12-25 15:32:33 -05:00
Thomas Harte
a8ba3607b7
Adds (and disables) a minor additional piece of logging.
2019-12-24 21:43:39 -05:00
Thomas Harte
5068328a15
Fixes debugging output.
2019-12-24 19:15:58 -05:00
Thomas Harte
b2bed82da6
Switches to standard logging.
2019-12-23 22:00:40 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
e5440a4146
Hacks in a colour burst.
...
With a major flaw: it's implicit. I think I need a minor rethink of various components here.
2019-12-20 23:49:38 -05:00
Thomas Harte
47508d50a7
Wires through a composite video option for the ST.
...
Which is great and all, except that I've not yet inserted a colour burst. So it's monochrome.
2019-12-20 20:49:14 -05:00
Thomas Harte
3d83f5ab49
Ensures a proper size
handoff and implements a ripple feature I happened to find a forum post about.
2019-12-19 22:58:07 -05:00
Thomas Harte
0007dc23b3
Eliminates bit 0 of the DMA address.
2019-12-19 22:44:21 -05:00
Thomas Harte
ed7f171736
Moves address reload to end of vertical sync.
...
I have no information as to when it should be, so this is as valid a guess as any other.
2019-12-19 22:20:43 -05:00
Thomas Harte
0e066f0f70
Removes 'done' TODO.
...
For certain values of done.
2019-12-19 22:19:59 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
c00ae7ce6a
Adds a one-cycle delay on frequency changes.
2019-12-13 19:57:54 -05:00
Thomas Harte
4bcf217324
Ensures delayed loading isn't interrupted by blank, hsync.
2019-12-12 23:20:28 -05:00
Thomas Harte
f6f2b4b90f
Removes double DE edge test.
2019-12-12 22:50:35 -05:00
Thomas Harte
95b5db4d87
Tweaks timings yet further, adds a FIFO reset.
...
The accuracy of this may require further research.
2019-12-11 23:22:20 -05:00
Thomas Harte
de4403e021
Corrects blank timing.
2019-12-10 22:17:57 -05:00
Thomas Harte
0a405d1c06
Introduces a latency between DE and load.
2019-12-10 21:24:15 -05:00
Thomas Harte
768b3709b8
Corrects audio clock rate.
2019-12-10 20:25:27 -05:00
Thomas Harte
a7cfb840ef
Adds but presently disables a diagnostic for border elimination.
2019-12-08 22:34:42 -05:00
Thomas Harte
c785797da6
Adds a warning for unhandled reset.
2019-12-08 21:01:30 -05:00
Thomas Harte
0408592ada
Switches to byte buffers and seeks to reduce unnecessary video flushing.
2019-12-08 20:20:13 -05:00
Thomas Harte
0ed87c61bd
Introduces an explicit area of floating bus, starts adding bus errors.
2019-12-08 11:52:43 -05:00
Thomas Harte
08a27bdec7
NTSC frame length is correct; removes TODO.
2019-12-08 11:51:12 -05:00
Thomas Harte
894066984c
Moves beginning and end of vertical sync to what I now believe is its proper place.
...
At least one demo now successfully opens the top border.
2019-11-19 20:13:47 -05:00
Thomas Harte
e787c03530
Slightly shortens NTSC frame.
...
Either: (i) 263 is incorrect; or (ii) my logic as to frame height is incorrect. Given that the horizontal side of things is really well documented, I'm currently guessing (i). Research to do.
2019-11-18 23:47:27 -05:00
Thomas Harte
c04d2f6c6e
Restricts DTack delay to RAM and Shifter accesses.
2019-11-18 22:57:13 -05:00
Thomas Harte
6990abc0d3
Tweaks selected output mode when both BPP bits are set.
2019-11-18 22:56:40 -05:00
Thomas Harte
ade8df7217
Permits a delay on DE propagation back to the CPU. Plus tests.
...
Currently set at 28 cycles, but I don't know.
2019-11-18 22:12:24 -05:00
Thomas Harte
82c984afa4
Switches the joysticks around.
...
Thereby finally allowing me to control mode games.
2019-11-18 20:02:27 -05:00
Thomas Harte
1202b0a65f
Establishes a pipeline for delayed public state visibility.
2019-11-17 23:28:00 -05:00
Thomas Harte
facc0a1976
Amps up the documentation.
2019-11-17 21:28:51 -05:00
Thomas Harte
253dd84109
Corrects accidental dropping of pixel residue.
...
Specific issue: the repeated (start_column != end_column) test, which can no longer be correct if start_column has been incremented in the (x_&7) test.
The visible effect was to omit pixels from the output wave, which also affected observed sync timing.
2019-11-17 18:34:13 -05:00
Thomas Harte
2c4f372872
Adds support for the .ST file format.
2019-11-12 23:23:14 -05:00
Thomas Harte
f4cfca0451
Merge branch 'master' of github.com:TomHarte/CLK
2019-11-12 19:38:44 -05:00
Thomas Harte
eb287605f7
Switches to a default of TOS 1.04.
2019-11-12 19:38:30 -05:00
Thomas Harte
6a82c87320
Withdraws border optimisation temporarily; I think I may be onto an output bug here.
2019-11-12 19:33:13 -05:00
Thomas Harte
f0478225f0
Adjusts logic to reduce number of output spans.
2019-11-12 19:30:28 -05:00
Thomas Harte
c6f6bc68e1
Undoes non-insertion of media.
2019-11-10 21:52:06 -05:00
Thomas Harte
ab34fad8ca
Introduces a cleaner, separated shifter.
2019-11-10 21:39:40 -05:00
Thomas Harte
7ae0902103
Adds additional joystick commands to the dispatcher.
2019-11-09 20:10:54 -05:00
Thomas Harte
8e9428623e
Adds joystick events to the Atari ST.
2019-11-09 18:39:22 -05:00
Thomas Harte
2c25135d8a
Fixes const correctness for joystick machines; the ST is now one such.
2019-11-09 18:19:05 -05:00
Thomas Harte
860837d894
Corrects: KeyPad -> Keypad. Also fleshes out Atari ST keyboard mapping.
2019-11-09 18:02:14 -05:00
Thomas Harte
0204003680
Resolves GCC warnings.
2019-11-09 16:12:37 -05:00
Thomas Harte
77ef7dc8fc
Shuffles ST and 2600 into a common parent.
2019-11-09 15:31:41 -05:00