//
//  Blitter.cpp
//  Clock Signal
//
//  Created by Thomas Harte on 22/07/2021.
//  Copyright © 2021 Thomas Harte. All rights reserved.
//

#include "Blitter.hpp"

#include "Minterms.hpp"

//#define NDEBUG
#define LOG_PREFIX "[Blitter] "
#include "../../Outputs/Log.hpp"

using namespace Amiga;

void Blitter::set_control(int index, uint16_t value) {
	if(index) {
		line_mode_ = (value & 0x0001);
		one_dot_ = value & 0x0002;
		line_direction_ = (value >> 2) & 7;
		line_sign_ = (value & 0x0040) ? -1 : 1;

		direction_ = one_dot_ ? uint32_t(-1) : uint32_t(1);
		inclusive_fill_ = (value & 0x0008);
		exclusive_fill_ = (value & 0x0010);
		fill_carry_ = (value & 0x0004);
	} else {
		minterms_ = value & 0xff;
		channel_enables_[3] = value & 0x100;
		channel_enables_[2] = value & 0x200;
		channel_enables_[1] = value & 0x400;
		channel_enables_[0] = value & 0x800;
	}
	shifts_[index] = value >> 12;
	LOG("Set control " << index << " to " << PADHEX(4) << value);
}

void Blitter::set_first_word_mask(uint16_t value) {
	LOG("Set first word mask: " << PADHEX(4) << value);
	a_mask_[0] = value;
}

void Blitter::set_last_word_mask(uint16_t value) {
	LOG("Set last word mask: " << PADHEX(4) << value);
	a_mask_[1] = value;
}

void Blitter::set_size(uint16_t value) {
	width_ = (width_ & ~0x3f) | (value & 0x3f);
	height_ = (height_ & ~0x3ff) | (value >> 6);
	LOG("Set size to " << std::dec << width_ << ", " << height_);

	// Current assumption: writing this register informs the
	// blitter that it should treat itself as about to start a new line.
}

void Blitter::set_minterms(uint16_t value) {
	LOG("Set minterms " << PADHEX(4) << value);
	minterms_ = value & 0xff;
}

void Blitter::set_vertical_size(uint16_t value) {
	LOG("Set vertical size " << PADHEX(4) << value);
}

void Blitter::set_horizontal_size(uint16_t value) {
	LOG("Set horizontal size " << PADHEX(4) << value);
}

void Blitter::set_modulo(int channel, uint16_t value) {
	LOG("Set modulo size " << channel << " to " << PADHEX(4) << value);

	// Convert by sign extension.
	modulos_[channel] = uint32_t(int16_t(value) >> 1);
}

void Blitter::set_data(int channel, uint16_t value) {
	LOG("Set data " << channel << " to " << PADHEX(4) << value);

	// Ugh, backed myself into a corner. TODO: clean.
	switch(channel) {
		case 0: a_ = value; break;
		case 1: b_ = value; break;
		case 2: c_ = value; break;
		default: break;
	}
}

uint16_t Blitter::get_status() {
	LOG("Returned status of " << (height_ ? 0x8000 : 0x0000));
	return height_ ? 0x8000 : 0x0000;
}

bool Blitter::advance() {
	if(!height_) return false;

	if(line_mode_) {
		//
		// Line mode.
		//

		// Bluffer's guide to line mode:
		//
		// In Bresenham terms, the following registers have been set up:
		//
		//	[A modulo] = 4 * (dy - dx)
		//	[B modulo] = 4 * dy
		//	[A pointer] = 4 * dy - 2 * dx, with the sign flag in BLTCON1 indicating sign.
		//
		//	[A data] = 0x8000
		//	[Both masks] = 0xffff
		//	[A shift] = x1 & 15
		//
		//	[B data] = texture
		//	[B shift] = bit at which to start the line texture (0 = LSB)
		//
		//	[C and D pointers] = word containing the first pixel of the line
		//	[C and D modulo] = width of the bitplane in bytes
		//
		//	height = number of pixels
		//
		//	If ONEDOT of BLTCON1 is set, plot only a single bit per horizontal row.
		//
		//	BLTCON1 quadrants are (bits 2–4):
		//
		//		110 -> step in x, x positive, y negative
		//		111 -> step in x, x negative, y negative
		//		101 -> step in x, x negative, y positive
		//		100 -> step in x, x positive, y positive
		//
		//		001 -> step in y, x positive, y negative
		//		011 -> step in y, x negative, y negative
		//		010 -> step in y, x negative, y positive
		//		000 -> step in y, x positive, y positive
		//
		//	So that's:
		//
		//		* bit 4 = x [=1] or y [=0] major;
		//		* bit 3 = 1 => major variable negative; otherwise positive;
		//		* bit 2 = 1 => minor variable negative; otherwise positive.

		//
		// Implementation below is heavily based on the documentation found
		// at https://github.com/niklasekstrom/blitter-subpixel-line/blob/master/Drawing%20lines%20using%20the%20Amiga%20blitter.pdf
		//

		int error = int16_t(pointer_[0] << 1) >> 1;	// TODO: what happens if line_sign_ doesn't agree with this?
		bool draw_ = true;
		while(height_--) {

			if(draw_) {
				// TODO: patterned lines. Unclear what to do with the bit that comes out of b.
				// Probably extend it to a full word?
				c_ = ram_[pointer_[3] & ram_mask_];
				ram_[pointer_[3] & ram_mask_] =
					apply_minterm<uint16_t>(a_ >> shifts_[0], b_, c_, minterms_);
				draw_ &= !one_dot_;
			}

			constexpr int LEFT	= 1 << 0;
			constexpr int RIGHT	= 1 << 1;
			constexpr int UP	= 1 << 2;
			constexpr int DOWN	= 1 << 3;
			int step = (line_direction_ & 4) ?
				((line_direction_ & 1) ? LEFT : RIGHT) :
				((line_direction_ & 1) ? UP : DOWN);

			if(error < 0) {
				error += modulos_[1];
			} else {
				step |=
					(line_direction_ & 4) ?
						((line_direction_ & 2) ? UP : DOWN) :
						((line_direction_ & 2) ? LEFT : RIGHT);

				error += modulos_[0];
			}

			if(step & LEFT) {
				--shifts_[0];
				if(shifts_[0] == -1) {
					--pointer_[3];
				}
			} else if(step & RIGHT) {
				++shifts_[0];
				if(shifts_[0] == 16) {
					++pointer_[3];
				}
			}
			shifts_[0] &= 15;

			if(step & UP) {
				pointer_[3] -= modulos_[2];
				draw_ = true;
			} else if(step & DOWN) {
				pointer_[3] += modulos_[2];
				draw_ = true;
			}
		}
	} else {
		// Copy mode.

//		int lc = 0;
//		printf("*** [%d x %d]\n", width_, height_);

		// Quick hack: do the entire action atomically.
		for(int y = 0; y < height_; y++) {
			for(int x = 0; x < width_; x++) {
				if(channel_enables_[0]) {
					a32_ = (a32_ << 16) | ram_[pointer_[0] & ram_mask_];
					a_ = uint16_t(a32_ >> shifts_[0]);
					pointer_[0] += direction_;
				}

				if(channel_enables_[1]) {
					b32_ = (b32_ << 16) | ram_[pointer_[1] & ram_mask_];
					b_ = uint16_t(b32_ >> shifts_[1]);
					pointer_[1] += direction_;
				}

				if(channel_enables_[2]) {
					c_ = ram_[pointer_[2] & ram_mask_];
					pointer_[2] += direction_;
				}

				if(channel_enables_[3]) {
//					if(!(lc&15)) printf("\n%06x: ", pointer_[3]);
//					++lc;

					uint16_t a_mask = 0xffff;
					if(x == 0) a_mask &= a_mask_[0];
					if(x == width_ - 1) a_mask &= a_mask_[1];

					ram_[pointer_[3] & ram_mask_] =
						apply_minterm<uint16_t>(
							a_ & a_mask,	// TODO: is this properly-placed?
							b_,
							c_,
							minterms_);

//					printf("%04x ", ram_[pointer_[3] & ram_mask_]);

					pointer_[3] += direction_;
				}
			}

			pointer_[0] += modulos_[0] * channel_enables_[0];
			pointer_[1] += modulos_[1] * channel_enables_[1];
			pointer_[2] += modulos_[2] * channel_enables_[2];
			pointer_[3] += modulos_[3] * channel_enables_[3];
		}
//		printf("\n");
	}

	posit_interrupt(InterruptFlag::Blitter);
	height_ = 0;

	return true;
}