// // CGA.hpp // Clock Signal // // Created by Thomas Harte on 05/12/2023. // Copyright © 2023 Thomas Harte. All rights reserved. // #ifndef CGA_h #define CGA_h #include "../../Components/6845/CRTC6845.hpp" #include "../../Outputs/CRT/CRT.hpp" #include "../../Machines/Utility/ROMCatalogue.hpp" namespace PCCompatible { class CGA { public: CGA() : crtc_(Motorola::CRTC::Personality::HD6845S, outputter_) {} static constexpr uint32_t BaseAddress = 0xb'8000; static constexpr auto FontROM = ROM::Name::PCCompatibleCGAFont; void set_source(const uint8_t *ram, std::vector font) { outputter_.ram = ram; outputter_.font = font; } void run_for(Cycles cycles) { // Input rate is the PIT rate of 1,193,182 Hz. // CGA is clocked at the real oscillator rate of 14 times that. // But there's also an internal divide by 8 to align to the fetch clock. full_clock_ += 7 * cycles.as(); const int modulo = 4 * outputter_.clock_divider; crtc_.run_for(Cycles(full_clock_ / modulo)); full_clock_ %= modulo; } template void write(uint8_t value) { switch(address) { case 0: case 2: case 4: case 6: crtc_.select_register(value); break; case 1: case 3: case 5: case 7: crtc_.set_register(value); break; case 0x8: outputter_.set_mode(value); break; case 0x9: outputter_.set_colours(value); break; } } template uint8_t read() { switch(address) { case 1: case 3: case 5: case 7: return crtc_.get_register(); case 0xa: return // b3: 1 => in vsync; 0 => not; // b2: 1 => light pen switch is off; // b1: 1 => positive edge from light pen has set trigger; // b0: 1 => safe to write to VRAM now without causing snow. (crtc_.get_bus_state().vsync ? 0b1001 : 0b0000) | (crtc_.get_bus_state().hsync ? 0b0001 : 0b0000) | 0b0100; default: return 0xff; } } // MARK: - Call-ins for ScanProducer. void set_scan_target(Outputs::Display::ScanTarget *scan_target) { outputter_.crt.set_scan_target(scan_target); } Outputs::Display::ScanStatus get_scaled_scan_status() const { return outputter_.crt.get_scaled_scan_status() * 4.0f / (7.0f * 8.0f); } private: struct CRTCOutputter { CRTCOutputter() : crt(912, 8, 262, 3, Outputs::Display::InputDataType::Red2Green2Blue2) { // crt.set_visible_area(Outputs::Display::Rect(0.1072f, 0.1f, 0.842105263157895f, 0.842105263157895f)); crt.set_display_type(Outputs::Display::DisplayType::RGB); } void set_mode(uint8_t control) { // b5: enable blink // b4: 1 => 640x200 graphics // b3: video enable // b2: 1 => monochrome // b1: 1 => 320x200 graphics; 0 => text // b0: 1 => 80-column text; 0 => 40 control_ = control; if(control & 0x2) { mode_ = (control & 0x10) ? Mode::Pixels640 : Mode::Pixels320; pixels_per_tick = (mode_ == Mode::Pixels640) ? 16 : 8; } else { mode_ = Mode::Text; pixels_per_tick = 8; } clock_divider = 1 + !(control & 0x01); } void set_colours(uint8_t value) { if(value & 0x20) { palette[0] = 0b00'00'00; palette[1] = 0b00'10'10; palette[2] = 0b10'00'10; palette[3] = 0b10'10'10; } else { palette[0] = 0b00'00'00; palette[1] = 0b00'10'00; palette[2] = 0b10'00'00; palette[3] = 0b10'10'00; // TODO: brown, here and elsewhere. } } uint8_t control() { return control_; } void perform_bus_cycle_phase1(const Motorola::CRTC::BusState &state) { // Determine new output state. const OutputState new_state = (state.hsync | state.vsync) ? OutputState::Sync : ((state.display_enable && control_&0x08) ? OutputState::Pixels : OutputState::Border); // Upon either a state change or just having accumulated too much local time... if(new_state != output_state || active_pixels_per_tick != pixels_per_tick || active_clock_divider != clock_divider || count > 912) { // (1) flush preexisting state. if(count) { switch(output_state) { case OutputState::Sync: crt.output_sync(count * active_clock_divider); break; case OutputState::Border: crt.output_blank(count * active_clock_divider); break; case OutputState::Pixels: flush_pixels(); break; } } // (2) adopt new state. output_state = new_state; active_pixels_per_tick = pixels_per_tick; active_clock_divider = clock_divider; count = 0; } // Collect pixels if applicable. if(output_state == OutputState::Pixels) { if(!pixels) { pixel_pointer = pixels = crt.begin_data(DefaultAllocationSize); // Flush any period where pixels weren't recorded due to back pressure. if(pixels && count) { crt.output_blank(count * active_clock_divider); count = 0; } } if(pixels) { if(state.cursor) { std::fill(pixel_pointer, pixel_pointer + pixels_per_tick, 0x3f); // i.e. white. } else { if(mode_ == Mode::Text) { serialise_text(state); } else { serialise_pixels(state); } } pixel_pointer += pixels_per_tick; } } // Advance. count += 8; // Output pixel row prematurely if storage is exhausted. if(output_state == OutputState::Pixels && pixel_pointer == pixels + DefaultAllocationSize) { flush_pixels(); count = 0; } } void perform_bus_cycle_phase2(const Motorola::CRTC::BusState &) {} void flush_pixels() { crt.output_data(count * active_clock_divider, size_t(count)); pixels = pixel_pointer = nullptr; } void serialise_pixels(const Motorola::CRTC::BusState &state) { // This is what I think is happenings: // // Refresh address is still shifted left one and two bytes are fetched, just as if it were // character code + attributes except that these are two bytes worth of graphics. // // Meanwhile, row address is used to invent a 15th address line. const auto base_address = ((state.refresh_address << 1) + (state.row_address << 13)) & 0x3fff; const uint8_t bitmap[] = { ram[base_address], ram[base_address + 1], }; if(mode_ == Mode::Pixels320) { pixel_pointer[0] = palette[(bitmap[0] & 0xc0) >> 6]; pixel_pointer[1] = palette[(bitmap[0] & 0x30) >> 4]; pixel_pointer[2] = palette[(bitmap[0] & 0x0c) >> 2]; pixel_pointer[3] = palette[(bitmap[0] & 0x03) >> 0]; pixel_pointer[4] = palette[(bitmap[1] & 0xc0) >> 6]; pixel_pointer[5] = palette[(bitmap[1] & 0x30) >> 4]; pixel_pointer[6] = palette[(bitmap[1] & 0x0c) >> 2]; pixel_pointer[7] = palette[(bitmap[1] & 0x03) >> 0]; } else { } } void serialise_text(const Motorola::CRTC::BusState &state) { const uint8_t attributes = ram[((state.refresh_address << 1) + 1) & 0xfff]; const uint8_t glyph = ram[((state.refresh_address << 1) + 0) & 0xfff]; const uint8_t row = font[(glyph * 8) + state.row_address]; uint8_t colours[2] = { uint8_t(((attributes & 0x40) >> 1) | ((attributes & 0x20) >> 2) | ((attributes & 0x10) >> 3)), uint8_t(((attributes & 0x04) << 3) | ((attributes & 0x02) << 2) | ((attributes & 0x01) << 1)), }; // Apply foreground intensity. if(attributes & 0x08) { colours[1] |= colours[1] >> 1; } // Apply blink or background intensity. if(control_ & 0x20) { if((attributes & 0x80) && (state.field_count & 16)) { std::swap(colours[0], colours[1]); } } else { if(attributes & 0x80) { colours[0] |= colours[0] >> 1; } } // Draw according to ROM contents. pixel_pointer[0] = (row & 0x80) ? colours[1] : colours[0]; pixel_pointer[1] = (row & 0x40) ? colours[1] : colours[0]; pixel_pointer[2] = (row & 0x20) ? colours[1] : colours[0]; pixel_pointer[3] = (row & 0x10) ? colours[1] : colours[0]; pixel_pointer[4] = (row & 0x08) ? colours[1] : colours[0]; pixel_pointer[5] = (row & 0x04) ? colours[1] : colours[0]; pixel_pointer[6] = (row & 0x02) ? colours[1] : colours[0]; pixel_pointer[7] = (row & 0x01) ? colours[1] : colours[0]; } Outputs::CRT::CRT crt; static constexpr size_t DefaultAllocationSize = 320; // Current output stream. uint8_t *pixels = nullptr; uint8_t *pixel_pointer = nullptr; int active_pixels_per_tick = 8; int active_clock_divider = 1; // Source data. const uint8_t *ram = nullptr; std::vector font; // CRTC state tracking, for CRT serialisation. enum class OutputState { Sync, Pixels, Border } output_state = OutputState::Sync; int count = 0; // Current Programmer-set parameters. int clock_divider = 1; int pixels_per_tick = 8; uint8_t control_ = 0; enum class Mode { Pixels640, Pixels320, Text, } mode_ = Mode::Text; uint8_t palette[4]; } outputter_; Motorola::CRTC::CRTC6845 crtc_; int full_clock_; }; } #endif /* CGA_h */