//
//  JustInTime.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 28/07/2019.
//  Copyright © 2019 Thomas Harte. All rights reserved.
//

#pragma once

#include "ClockReceiver.hpp"
#include "../Concurrency/AsyncTaskQueue.hpp"
#include "ClockingHintSource.hpp"
#include "ForceInline.hpp"

#include <atomic>

/*!
	A JustInTimeActor holds (i) an embedded object with a run_for method; and (ii) an amount
	of time since run_for was last called.

	Time can be added using the += operator. The -> operator can be used to access the
	embedded object. All time accumulated will be pushed to object before the pointer is returned.

	Machines that accumulate HalfCycle time but supply to a Cycle-counted device may supply a
	separate @c TargetTimeScale at template declaration.

	If the held object implements @c next_sequence_point() then it'll be used to flush implicitly
	as and when sequence points are hit. Callers can use will_flush() to predict these.

	If the held object is a subclass of ClockingHint::Source, this template will register as an
	observer and potentially stop clocking or stop delaying clocking until just-in-time references
	as directed.

	TODO: incorporate and codify AsyncJustInTimeActor.
*/
template <class T, class LocalTimeScale = HalfCycles, int multiplier = 1, int divider = 1> class JustInTimeActor:
	public ClockingHint::Observer
{
private:
	/*!
		A std::unique_ptr deleter which causes an update_sequence_point to occur on the actor supplied
		to it at construction if it implements @c next_sequence_point(). Otherwise destruction is a no-op.

		**Does not delete the object.**

		This is used by the -> operators below, which provide a unique pointer to the enclosed object and
		update their sequence points upon its destruction — i.e. after the caller has made whatever call
		or calls as were relevant to the enclosed object.
	*/
	class SequencePointAwareDeleter {
	public:
		explicit SequencePointAwareDeleter(
			JustInTimeActor<T, LocalTimeScale, multiplier, divider> *const actor) noexcept
				: actor_(actor) {}

		forceinline void operator ()(const T *const) const {
			if constexpr (has_sequence_points<T>::value) {
				actor_->update_sequence_point();
			}
		}

	private:
		JustInTimeActor<T, LocalTimeScale, multiplier, divider> *const actor_;
	};

	// This block of SFINAE determines whether objects of type T accepts Cycles or HalfCycles.
	using HalfRunFor = void (T::*const)(HalfCycles);
	static uint8_t half_sig(...);
	static uint16_t half_sig(HalfRunFor);
	using TargetTimeScale =
		std::conditional_t<
			sizeof(half_sig(&T::run_for)) == sizeof(uint16_t),
			HalfCycles,
			Cycles>;

public:
	/// Constructs a new JustInTimeActor using the same construction arguments as the included object.
	template<typename... Args> JustInTimeActor(Args&&... args) : object_(std::forward<Args>(args)...) {
		if constexpr (std::is_base_of<ClockingHint::Source, T>::value) {
			object_.set_clocking_hint_observer(this);
		}
	}

	/// Adds time to the actor.
	///
	/// @returns @c true if adding time caused a flush; @c false otherwise.
	forceinline bool operator += (LocalTimeScale rhs) {
		if constexpr (std::is_base_of<ClockingHint::Source, T>::value) {
			if(clocking_preference_ == ClockingHint::Preference::None) {
				return false;
			}
		}

		if constexpr (multiplier != 1) {
			time_since_update_ += rhs * multiplier;
		} else {
			time_since_update_ += rhs;
		}
		is_flushed_ = false;

		if constexpr (std::is_base_of<ClockingHint::Source, T>::value) {
			if (clocking_preference_ == ClockingHint::Preference::RealTime) {
				flush();
				return true;
			}
		}

		if constexpr (has_sequence_points<T>::value) {
			time_until_event_ -= rhs * multiplier;
			if(time_until_event_ <= LocalTimeScale(0)) {
				time_overrun_ = time_until_event_ / divider;
				flush();
				update_sequence_point();
				return true;
			}
		}

		return false;
	}

	/// Flushes all accumulated time and returns a pointer to the included object.
	///
	/// If this object provides sequence points, checks for changes to the next
	/// sequence point upon deletion of the pointer.
	[[nodiscard]] forceinline auto operator->() {
#ifndef NDEBUG
		assert(!flush_concurrency_check_.test_and_set());
#endif
		flush();
#ifndef NDEBUG
		flush_concurrency_check_.clear();
#endif
		return std::unique_ptr<T, SequencePointAwareDeleter>(&object_, SequencePointAwareDeleter(this));
	}

	/// Acts exactly as per the standard ->, but preserves constness.
	///
	/// Despite being const, this will flush the object and, if relevant, update the next sequence point.
	[[nodiscard]] forceinline auto operator -> () const {
		auto non_const_this = const_cast<JustInTimeActor<T, LocalTimeScale, multiplier, divider> *>(this);
#ifndef NDEBUG
		assert(!non_const_this->flush_concurrency_check_.test_and_set());
#endif
		non_const_this->flush();
#ifndef NDEBUG
		non_const_this->flush_concurrency_check_.clear();
#endif
		return std::unique_ptr<const T, SequencePointAwareDeleter>(&object_, SequencePointAwareDeleter(non_const_this));
	}

	/// @returns a pointer to the included object, without flushing time.
	[[nodiscard]] forceinline T *last_valid() {
		return &object_;
	}

	/// @returns a const pointer to the included object, without flushing time.
	[[nodiscard]] forceinline const T *last_valid() const {
		return &object_;
	}

	/// @returns the amount of time since the object was last flushed, in the target time scale.
	[[nodiscard]] forceinline TargetTimeScale time_since_flush() const {
		if constexpr (divider == 1) {
			return time_since_update_;
		}
		return TargetTimeScale(time_since_update_.as_integral() / divider);
	}

	/// @returns the amount of time since the object was last flushed, plus the local time scale @c offset,
	/// converted to the target time scale.
	[[nodiscard]] forceinline TargetTimeScale time_since_flush(LocalTimeScale offset) const {
		if constexpr (divider == 1) {
			return time_since_update_ + offset;
		}
		return TargetTimeScale((time_since_update_ + offset).as_integral() / divider);
	}

	/// Flushes all accumulated time.
	///
	/// This does not affect this actor's record of when the next sequence point will occur.
	forceinline void flush() {
		if(!is_flushed_) {
			did_flush_ = is_flushed_ = true;
			if constexpr (divider == 1) {
				const auto duration = time_since_update_.template flush<TargetTimeScale>();
				object_.run_for(duration);
			} else {
				const auto duration = time_since_update_.template divide<TargetTimeScale>(LocalTimeScale(divider));
				if(duration > TargetTimeScale(0))
					object_.run_for(duration);
			}
		}
	}

	/// Indicates whether a flush has occurred since the last call to did_flush().
	[[nodiscard]] forceinline bool did_flush() {
		const bool did_flush = did_flush_;
		did_flush_ = false;
		return did_flush;
	}

	/// @returns a number in the range [-max, 0] indicating the offset of the most recent sequence
	/// point from the final time at the end of the += that triggered the sequence point.
	[[nodiscard]] forceinline LocalTimeScale last_sequence_point_overrun() {
		return time_overrun_;
	}

	/// @returns the number of cycles until the next sequence-point-based flush, if the embedded object
	/// supports sequence points; @c LocalTimeScale() otherwise.
	[[nodiscard]] LocalTimeScale cycles_until_implicit_flush() const {
		return time_until_event_ / divider;
	}

	/// Indicates whether a sequence-point-caused flush will occur if the specified period is added.
	[[nodiscard]] forceinline bool will_flush(LocalTimeScale rhs) const {
		if constexpr (!has_sequence_points<T>::value) {
			return false;
		}
		return rhs >= time_until_event_;
	}

	/// Indicates the amount of time, in the local time scale, until the first local slot that falls wholly
	/// after @c duration, if that delay were to occur in @c offset units of time from now.
	[[nodiscard]] forceinline LocalTimeScale back_map(TargetTimeScale duration, TargetTimeScale offset) const {
		// A 1:1 mapping is easy.
		if constexpr (multiplier == 1 && divider == 1) {
			return duration;
		}

		// Work out when this query is placed, and the time to which it relates
		const auto base = time_since_update_ + offset * divider;
		const auto target = base + duration * divider;

		// Figure out the number of whole input steps that is required to get
		// past target, and subtract the number of whole input steps necessary
		// to get to base.
		const auto steps_to_base = base.as_integral() / multiplier;
		const auto steps_to_target = (target.as_integral() + divider - 1) / multiplier;

		return LocalTimeScale(steps_to_target - steps_to_base);
	}

	/// Updates this template's record of the next sequence point.
	void update_sequence_point() {
		if constexpr (has_sequence_points<T>::value) {
			// Keep a fast path where no conversions will be applied; if conversions are
			// going to be applied then do a direct max -> max translation rather than
			// allowing the arithmetic to overflow.
			if constexpr (divider == 1 && std::is_same_v<LocalTimeScale, TargetTimeScale>) {
				time_until_event_ = object_.next_sequence_point();
			} else {
				const auto time = object_.next_sequence_point();
				if(time == TargetTimeScale::max()) {
					time_until_event_ = LocalTimeScale::max();
				} else {
					time_until_event_ = time * divider;
				}
			}
			assert(time_until_event_ > LocalTimeScale(0));
		}
	}

	/// @returns A cached copy of the object's clocking preference.
	ClockingHint::Preference clocking_preference() const {
		return clocking_preference_;
	}

private:
	T object_;
	LocalTimeScale time_since_update_, time_until_event_, time_overrun_;
	bool is_flushed_ = true;
	bool did_flush_ = false;

	template <typename S, typename = void> struct has_sequence_points : std::false_type {};
	template <typename S>
	struct has_sequence_points<S, decltype(void(std::declval<S &>().next_sequence_point()))> : std::true_type {};

	ClockingHint::Preference clocking_preference_ = ClockingHint::Preference::JustInTime;
	void set_component_prefers_clocking(ClockingHint::Source *, ClockingHint::Preference clocking) {
		clocking_preference_ = clocking;
	}

#ifndef NDEBUG
	std::atomic_flag flush_concurrency_check_{};
#endif
};

/*!
	An AsyncJustInTimeActor acts like a JustInTimeActor but additionally contains an AsyncTaskQueue.
	Any time the amount of accumulated time crosses a threshold provided at construction time,
	the object will be updated on the AsyncTaskQueue.
*/
template <class T, class LocalTimeScale = HalfCycles, class TargetTimeScale = LocalTimeScale>
class AsyncJustInTimeActor {
public:
	/// Constructs a new AsyncJustInTimeActor using the same construction arguments as the included object.
	template<typename... Args> AsyncJustInTimeActor(TargetTimeScale threshold, Args&&... args) :
		object_(std::forward<Args>(args)...),
		threshold_(threshold) {}

	/// Adds time to the actor.
	inline void operator += (const LocalTimeScale &rhs) {
		time_since_update_ += rhs;
		if(time_since_update_ >= threshold_) {
			time_since_update_ -= threshold_;
			task_queue_.enqueue([this] () {
				object_.run_for(threshold_);
			});
		}
		is_flushed_ = false;
	}

	/// Flushes all accumulated time and returns a pointer to the included object.
	inline T *operator->() {
		flush();
		return &object_;
	}

	/// Returns a pointer to the included object without flushing time.
	inline T *last_valid() {
		return &object_;
	}

	/// Flushes all accumulated time.
	inline void flush() {
		if(!is_flushed_) {
			task_queue_.flush();
			object_.run_for(time_since_update_.template flush<TargetTimeScale>());
			is_flushed_ = true;
		}
	}

private:
	T object_;
	LocalTimeScale time_since_update_;
	TargetTimeScale threshold_;
	bool is_flushed_ = true;
	Concurrency::AsyncTaskQueue<true> task_queue_;
};