// // 65816Storage.cpp // Clock Signal // // Created by Thomas Harte on 23/09/2020. // Copyright © 2020 Thomas Harte. All rights reserved. // #include "../65816.hpp" #include #include #include using namespace CPU::WDC65816; struct CPU::WDC65816::ProcessorStorageConstructor { // Establish that a storage constructor needs access to ProcessorStorage. ProcessorStorage &storage_; ProcessorStorageConstructor(ProcessorStorage &storage) : storage_(storage) {} enum class AccessType { Read, Write }; /// Divides memory-accessing instructions by whether they read or write. /// Read-modify-writes are documented with completely distinct bus programs, /// so there's no real ambiguity there. constexpr static AccessType access_type_for_operation(Operation operation) { switch(operation) { case ADC: case AND: case BIT: case CMP: case CPX: case CPY: case EOR: case ORA: case SBC: case LDA: case LDX: case LDY: // The access type for everything else is arbitrary; they're // not relevantly either read or write. default: return AccessType::Read; case STA: case STX: case STY: case STZ: return AccessType::Write; } } /// Indicates which of the memory-accessing instructions take their cue from the current /// size of the index registers, rather than 'memory'[/accumulator]. constexpr static bool operation_is_index_sized(Operation operation) { switch(operation) { case CPX: case CPY: case LDX: case LDY: case STX: case STY: return true; default: return false; } return false; } typedef void (* Generator)(AccessType, bool, const std::function&); using GeneratorKey = std::tuple; using PatternTable = std::map>; PatternTable installed_patterns; int opcode = 0; enum class AccessMode { Mixed, Always8Bit, Always16Bit }; void install(Generator generator, Operation operation, AccessMode access_mode = AccessMode::Mixed) { // Determine the access type implied by this operation. const AccessType access_type = access_type_for_operation(operation); // Install the bus pattern. const auto map_entry = install(generator, access_type); const size_t micro_op_location_8 = map_entry->second.first; const size_t micro_op_location_16 = map_entry->second.second; // Fill in the proper table entries and increment the opcode pointer. storage_.instructions[opcode].program_offsets[0] = (access_mode == AccessMode::Always8Bit) ? uint16_t(micro_op_location_8) : uint16_t(micro_op_location_16); storage_.instructions[opcode].program_offsets[1] = (access_mode == AccessMode::Always16Bit) ? uint16_t(micro_op_location_16) : uint16_t(micro_op_location_8); storage_.instructions[opcode].operation = operation; storage_.instructions[opcode].size_field = operation_is_index_sized(operation); ++opcode; } void set_exception_generator(Generator generator, Generator reset_generator) { const auto map_entry = install(generator); storage_.instructions[size_t(ProcessorStorage::OperationSlot::Exception)].program_offsets[0] = storage_.instructions[size_t(ProcessorStorage::OperationSlot::Exception)].program_offsets[1] = uint16_t(map_entry->second.first); storage_.instructions[size_t(ProcessorStorage::OperationSlot::Exception)].operation = JMPind; const auto reset_tail_entry = install(reset_generator); storage_.instructions[size_t(ProcessorStorage::OperationSlot::Reset)].program_offsets[0] = storage_.instructions[size_t(ProcessorStorage::OperationSlot::Reset)].program_offsets[1] = uint16_t(reset_tail_entry->second.first); storage_.instructions[size_t(ProcessorStorage::OperationSlot::Reset)].operation = JMPind; } void install_fetch_decode_execute() { storage_.instructions[size_t(ProcessorStorage::OperationSlot::FetchDecodeExecute)].program_offsets[0] = storage_.instructions[size_t(ProcessorStorage::OperationSlot::FetchDecodeExecute)].program_offsets[1] = uint16_t(storage_.micro_ops_.size()); storage_.micro_ops_.push_back(CycleFetchOpcode); storage_.micro_ops_.push_back(OperationDecode); } private: PatternTable::iterator install(Generator generator, AccessType access_type = AccessType::Read) { // Check whether this access type + addressing mode generator has already been generated. const auto key = std::make_pair(access_type, generator); const auto map_entry = installed_patterns.find(key); // If it wasn't found, generate it now in both 8- and 16-bit variants. // Otherwise, get the location of the existing entries. if(map_entry != installed_patterns.end()) { return map_entry; } // Generate 8-bit steps. const size_t micro_op_location_8 = storage_.micro_ops_.size(); (*generator)(access_type, true, [this] (MicroOp op) { this->storage_.micro_ops_.push_back(op); }); storage_.micro_ops_.push_back(OperationMoveToNextProgram); // Generate 16-bit steps. size_t micro_op_location_16 = storage_.micro_ops_.size(); (*generator)(access_type, false, [this] (MicroOp op) { this->storage_.micro_ops_.push_back(op); }); storage_.micro_ops_.push_back(OperationMoveToNextProgram); // Minor optimisation: elide the steps if 8- and 16-bit steps are equal. bool are_equal = true; size_t c = 0; while(true) { if(storage_.micro_ops_[micro_op_location_8 + c] != storage_.micro_ops_[micro_op_location_16 + c]) { are_equal = false; break; } if(storage_.micro_ops_[micro_op_location_8 + c] == OperationMoveToNextProgram) break; ++c; } if(are_equal) { storage_.micro_ops_.resize(micro_op_location_16); micro_op_location_16 = micro_op_location_8; } // Insert into the map and return the resulting iterator. return installed_patterns.insert(std::make_pair(key, std::make_pair(micro_op_location_8, micro_op_location_16))).first; } public: /* Code below is structured to ease translation from Table 5-7 of the 2018 edition of the WDC 65816 datasheet. In each case the relevant addressing mode is described here via a generator function that will spit out the correct MicroOps based on access type (i.e. read, write or read-modify-write) and data size (8- or 16-bit). That leads up to being able to declare the opcode map by addressing mode and operation alone. Things the generators can assume before they start: 1) the opcode has already been fetched and decoded, and the program counter incremented; 2) the data buffer is empty; and 3) the data address is undefined. */ // Performs the closing 8- or 16-bit read or write common to many modes below. static void read_write(AccessType type, bool is8bit, const std::function &target) { if(type == AccessType::Write) { target(OperationPerform); // Perform operation to fill the data buffer. if(!is8bit) target(CycleStoreIncrementData); // Data low. target(CycleStoreData); // Data [high]. } else { if(!is8bit) target(CycleFetchIncrementData); // Data low. target(CycleFetchData); // Data [high]. target(OperationPerform); // Perform operation from the data buffer. } } static void read_modify_write(bool is8bit, const std::function &target) { target(OperationSetMemoryLock); // Set the memory lock output until the end of this instruction. if(!is8bit) target(CycleFetchIncrementData); // Data low. target(CycleFetchData); // Data [high]. target(CycleStoreOrFetchDataThrowaway); // Native mode: reread final byte of data. // Emulated mode: rewrite final byte of data. target(OperationPerform); // Perform operation within the data buffer. if(!is8bit) target(CycleStoreDecrementData); // Data high. target(CycleStoreData); // Data [low]. } // 1a. Absolute; a. static void absolute(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(OperationConstructAbsolute); // Calculate data address. read_write(type, is8bit, target); } // 1b. Absolute; a, JMP. static void absolute_jmp(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New PCL. target(CycleFetchPC); // New PCH. target(OperationPerform); // [JMP] } // 1c. Absolute; a, JSR. static void absolute_jsr(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New PCL. target(CycleFetchPC); // New PCH. target(CycleFetchPCThrowaway); // IO. target(OperationPerform); // [JSR]. target(CyclePush); // PCH. target(CyclePush); // PCL. } // 1d. Absolute; a, read-modify-write. static void absolute_rmw(AccessType, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(OperationConstructAbsolute); // Calculate data address. read_modify_write(is8bit, target); } // 2a. Absolute Indexed Indirect; (a, x), JMP. static void absolute_indexed_indirect_jmp(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchPC); // AAH. target(CycleFetchPCThrowaway); // IO. target(OperationConstructAbsoluteIndexedIndirect); // Calculate data address. target(CycleFetchIncrementData); // New PCL target(CycleFetchData); // New PCH. target(OperationPerform); // [JMP] } // 2b. Absolute Indexed Indirect; (a, x), JSR. static void absolute_indexed_indirect_jsr(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(OperationCopyPCToData); // Prepare to push. target(CyclePush); // PCH. target(CyclePush); // PCL. target(CycleFetchPC); // AAH. target(CycleFetchPCThrowaway); // IO. target(OperationConstructAbsoluteIndexedIndirect); // Calculate data address. target(CycleFetchIncrementData); // New PCL target(CycleFetchData); // New PCH. target(OperationPerform); // ['JSR' (actually: JMPind will do)] } // 3a. Absolute Indirect; (a), JML. static void absolute_indirect_jml(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New AAL. target(CycleFetchPC); // New AAH. target(OperationConstructAbsolute16); // Calculate data address. target(CycleFetchIncrementData); // New PCL. target(CycleFetchIncrementData); // New PCH. target(CycleFetchData); // New PBR. target(OperationPerform); // [JML] } // 3b. Absolute Indirect; (a), JMP. static void absolute_indirect_jmp(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New AAL. target(CycleFetchPC); // New AAH. target(OperationConstructAbsolute16); // Calculate data address. target(CycleFetchIncrementData); // New PCL. target(CycleFetchData); // New PCH. target(OperationPerform); // [JMP] } // 4a. Absolute long; al. static void absolute_long(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(CycleFetchIncrementPC); // AAB. target(OperationConstructAbsoluteLong); // Calculate data address. read_write(type, is8bit, target); } // 4b. Absolute long; al, JMP. static void absolute_long_jmp(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New PCL. target(CycleFetchIncrementPC); // New PCH. target(CycleFetchPC); // New PBR. target(OperationCopyInstructionToData); target(OperationPerform); // ['JMP' (though it's JML in internal terms)] } // 4c. Absolute long al, JSL. static void absolute_long_jsl(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // New PCL. target(CycleFetchIncrementPC); // New PCH. target(OperationCopyPBRToData); // Copy PBR to the data register. target(CyclePush); // PBR. target(CycleAccessStack); // IO. target(CycleFetchPC); // New PBR. target(OperationConstructAbsolute); // Calculate data address. target(OperationPerform); // [JSL] target(CyclePush); // PCH. target(CyclePush); // PCL. } // 5. Absolute long, X; al, x. static void absolute_long_x(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(CycleFetchIncrementPC); // AAB. target(OperationConstructAbsoluteLongX); // Calculate data address. read_write(type, is8bit, target); } // 6a. Absolute, X; a, x. static void absolute_x(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. if(type == AccessType::Read) { target(OperationConstructAbsoluteXRead); // Calculate data address, potentially skipping the next fetch. } else { target(OperationConstructAbsoluteX); // Calculate data address. } target(CycleFetchIncorrectDataAddress); // Do the dummy read if necessary; OperationConstructAbsoluteXRead // will skip this if it isn't required. read_write(type, is8bit, target); } // 6b. Absolute, X; a, x, read-modify-write. static void absolute_x_rmw(AccessType, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(OperationConstructAbsoluteX); // Calculate data address. target(CycleFetchIncorrectDataAddress); // Perform dummy read. read_modify_write(is8bit, target); } // 7. Absolute, Y; a, y. static void absolute_y(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. if(type == AccessType::Read) { target(OperationConstructAbsoluteYRead); // Calculate data address, potentially skipping the next fetch. } else { target(OperationConstructAbsoluteY); // Calculate data address. } target(CycleFetchIncorrectDataAddress); // Do the dummy read if necessary; OperationConstructAbsoluteYRead // will skip this if it isn't required. read_write(type, is8bit, target); } // 8. Accumulator; A. static void accumulator(AccessType, bool, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. // TODO: seriously consider a-specific versions of all relevant operations; // the cost of interpreting three things here is kind of silly. target(OperationCopyAToData); target(OperationPerform); target(OperationCopyDataToA); } // 9a. Block Move Negative [and] // 9b. Block Move Positive. // // These don't fit the general model very well at all, hence the specialised fetch and store cycles. static void block_move(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // DBA. target(CycleFetchIncrementPC); // SBA. target(CycleFetchBlockX); // SRC Data. target(CycleStoreBlockY); // Dest Data. target(CycleFetchBlockY); // IO. target(CycleFetchBlockY); // IO. target(OperationPerform); // [MVN or MVP] } // 10a. Direct; d. // (That's zero page in 6502 terms) static void direct(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. read_write(type, is8bit, target); } // 10b. Direct; d, read-modify-write. // (That's zero page in 6502 terms) static void direct_rmw(AccessType, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. read_modify_write(is8bit, target); } // 11. Direct Indexed Indirect; (d, x). static void direct_indexed_indirect(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirectIndexedIndirect); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchData); // AAH. target(OperationCopyDataToInstruction); target(OperationConstructAbsolute); read_write(type, is8bit, target); } // 12. Direct Indirect; (d). static void direct_indirect(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchData); // AAH. target(OperationConstructDirectIndirect); read_write(type, is8bit, target); } // 13. Direct Indirect Indexed; (d), y. static void direct_indirect_indexed(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchData); // AAH. target(OperationCopyDataToInstruction); target(OperationConstructAbsoluteYRead); target(CycleFetchIncorrectDataAddress); // IO. read_write(type, is8bit, target); } // 14. Direct Indirect Indexed Long; [d], y. static void direct_indirect_indexed_long(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchIncrementData); // AAH. target(CycleFetchData); // AAB. target(OperationConstructDirectIndirectIndexedLong); read_write(type, is8bit, target); } // 15. Direct Indirect Long; [d]. static void direct_indirect_long(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirectLong); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchIncrementData); // AAH. target(CycleFetchData); // AAB. target(OperationConstructDirectIndirectLong); read_write(type, is8bit, target); } // 16a. Direct, X; d, x. static void direct_x(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirectX); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. read_write(type, is8bit, target); } // 16b. Direct, X; d, x, read-modify-write. static void direct_x_rmw(AccessType, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirectX); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. read_modify_write(is8bit, target); } // 17. Direct, Y; d, y. static void direct_y(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirectY); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. read_write(type, is8bit, target); } // 18. Immediate; #. static void immediate(AccessType, bool is8bit, const std::function &target) { if(!is8bit) target(CycleFetchIncrementPC); // IDL. target(CycleFetchIncrementPC); // ID [H]. target(OperationCopyInstructionToData); target(OperationPerform); } static void immediate_rep_sep(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // IDL. target(CycleFetchPreviousPCThrowaway); // "Add 1 cycle for REP and SEP" target(OperationPerform); } // 19a. Implied; i. static void implied(AccessType, bool, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(OperationPerform); } // 19b. Implied; i; XBA. static void implied_xba(AccessType, bool, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationPerform); } // 19c. Stop the Clock; also // 19d. Wait for interrupt. static void stp_wai(AccessType, bool, const std::function &target) { target(OperationPerform); // Establishes the termination condition. target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(CycleRepeatingNone); // This will first check whether the STP/WAI exit // condition has occurred; if not then it'll issue // either a BusOperation::None or ::Ready and then // reschedule itself. } // 20. Relative; r. static void relative(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // Offset. target(OperationPerform); // The branch instructions will all skip one or three // of the next cycles, depending on the effect of // the jump. It'll also calculate the correct target // address, placing it into the data buffer. target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationCopyDataToPC); // Install the address that was calculated above. } // 21. Relative long; rl. static void relative_long(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // Offset low. target(CycleFetchIncrementPC); // Offset high. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationPerform); // [BRL] } // 22a. Stack; s, abort/irq/nmi/res. // // Combined here with reset, which is the same sequence but with a different stack access. static void stack_exception_impl(AccessType, bool, const std::function &target, MicroOp stack_op) { target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationPrepareException); // Populates the data buffer; if the exception is a // reset then switches to the reset tail program. // Otherwise skips a micro-op if in emulation mode. target(stack_op); // PBR [skipped in emulation mode]. target(stack_op); // PCH. target(stack_op); // PCL. target(OperationPickExceptionVector); // Select vector address. target(stack_op); // P. target(OperationClearDataBuffer); // Prepare to fetch the vector. target(CycleFetchIncrementVector); // AAVL. target(CycleFetchVector); // AAVH. target(OperationPerform); // Jumps to the vector address. } static void stack_exception(AccessType type, bool is8bit, const std::function &target) { stack_exception_impl(type, is8bit, target, CyclePush); } static void reset(AccessType type, bool is8bit, const std::function &target) { // The reset program just disables the usual pushes. stack_exception_impl(type, is8bit, target, CycleAccessStack); } // 22b. Stack; s, PLx. static void stack_pull(AccessType, bool is8bit, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. if(!is8bit) target(CyclePull); // REG low. target(CyclePull); // REG [high]. target(OperationPerform); } // 22c. Stack; s, PHx. static void stack_push(AccessType, bool is8bit, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(OperationPerform); if(!is8bit) target(CyclePush); // REG high. target(CyclePush); // REG [low]. } // 22d. Stack; s, PEA. static void stack_pea(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // AAL. target(CycleFetchIncrementPC); // AAH. target(OperationCopyInstructionToData); target(CyclePush); // AAH. target(CyclePush); // AAL. } // 22e. Stack; s, PEI. static void stack_pei(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // DO. target(OperationConstructDirect); target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchIncrementData); // AAL. target(CycleFetchData); // AAH. target(CyclePush); // AAH. target(CyclePush); // AAL. } // 22f. Stack; s, PER. static void stack_per(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // Offset low. target(CycleFetchIncrementPC); // Offset high. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationConstructPER); target(CyclePush); // AAH. target(CyclePush); // AAL. } // 22g. Stack; s, RTI. static void stack_rti(AccessType, bool, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(CyclePull); // P. target(CyclePull); // New PCL. target(CyclePull); // New PCH. target(CyclePullIfNotEmulation); // PBR. target(OperationPerform); // [RTI] — to unpack the fields above. } // 22h. Stack; s, RTS. static void stack_rts(AccessType, bool, const std::function &target) { target(CycleFetchPreviousPCThrowaway); // IO. target(CycleFetchPreviousPCThrowaway); // IO. target(CyclePull); // PCL. target(CyclePull); // PCH. target(CycleAccessStack); // IO. target(OperationPerform); // [RTS] } // 22i. Stack; s, RTL. static void stack_rtl(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // IO. target(CycleFetchIncrementPC); // IO. target(CyclePull); // New PCL. target(CyclePull); // New PCH. target(CyclePull); // New PBR. target(OperationPerform); // [RTL] } // 22j. Stack; s, BRK/COP. static void brk_cop(AccessType, bool, const std::function &target) { target(CycleFetchIncrementPC); // Signature. target(OperationPrepareException); // Populates the data buffer; this skips a micro-op if // in emulation mode. target(CyclePush); // PBR [skipped in emulation mode]. target(CyclePush); // PCH. target(CyclePush); // PCL. target(OperationPickExceptionVector); // Selects the exception's target; I've assumed the same // logic as a 6502 here — i.e. that some interrupts can // usurp the vectors of others. target(CyclePush); // P. target(CycleFetchIncrementVector); // AAVL. target(CycleFetchVector); // AAVH. target(OperationPerform); // Jumps to the vector address. } // 23. Stack Relative; d, s. static void stack_relative(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // SO. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationConstructStackRelative); read_write(type, is8bit, target); } // 24. Stack Relative Indirect Indexed (d, s), y. static void stack_relative_indexed_indirect(AccessType type, bool is8bit, const std::function &target) { target(CycleFetchIncrementPC); // SO. target(CycleFetchPreviousPCThrowaway); // IO. target(OperationConstructStackRelative); target(CycleFetchIncrementData); // AAL. target(CycleFetchData); // AAH. target(CycleFetchDataThrowaway); // IO. target(OperationConstructStackRelativeIndexedIndirect); read_write(type, is8bit, target); } }; ProcessorStorage::ProcessorStorage() { set_reset_state(); micro_ops_.reserve(1024); ProcessorStorageConstructor constructor(*this); using AccessMode = ProcessorStorageConstructor::AccessMode; // Install the instructions. #define op(x, ...) constructor.install(&ProcessorStorageConstructor::x, __VA_ARGS__) /* 0x00 BRK s */ op(brk_cop, JMPind); /* 0x01 ORA (d, x) */ op(direct_indexed_indirect, ORA); /* 0x02 COP s */ op(brk_cop, JMPind); /* 0x03 ORA d, s */ op(stack_relative, ORA); /* 0x04 TSB d */ op(direct_rmw, TSB); /* 0x05 ORA d */ op(direct, ORA); /* 0x06 ASL d */ op(direct_rmw, ASL); /* 0x07 ORA [d] */ op(direct_indirect_long, ORA); /* 0x08 PHP s */ op(stack_push, PHP, AccessMode::Always8Bit); /* 0x09 ORA # */ op(immediate, ORA); /* 0x0a ASL A */ op(accumulator, ASL); /* 0x0b PHD s */ op(stack_push, PHD, AccessMode::Always16Bit); /* 0x0c TSB a */ op(absolute_rmw, TSB); /* 0x0d ORA a */ op(absolute, ORA); /* 0x0e ASL a */ op(absolute_rmw, ASL); /* 0x0f ORA al */ op(absolute_long, ORA); /* 0x10 BPL r */ op(relative, BPL); /* 0x11 ORA (d), y */ op(direct_indirect_indexed, ORA); /* 0x12 ORA (d) */ op(direct_indirect, ORA); /* 0x13 ORA (d, s), y */ op(stack_relative_indexed_indirect, ORA); /* 0x14 TRB d */ op(direct_rmw, TRB); /* 0x15 ORA d, x */ op(direct_x, ORA); /* 0x16 ASL d, x */ op(direct_x_rmw, ASL); /* 0x17 ORA [d], y */ op(direct_indirect_indexed_long, ORA); /* 0x18 CLC i */ op(implied, CLC); /* 0x19 ORA a, y */ op(absolute_y, ORA); /* 0x1a INC A */ op(accumulator, INC); /* 0x1b TCS i */ op(implied, TCS); /* 0x1c TRB a */ op(absolute_rmw, TRB); /* 0x1d ORA a, x */ op(absolute_x, ORA); /* 0x1e ASL a, x */ op(absolute_x_rmw, ASL); /* 0x1f ORA al, x */ op(absolute_long_x, ORA); /* 0x20 JSR a */ op(absolute_jsr, JSR); /* 0x21 AND (d, x) */ op(direct_indexed_indirect, AND); /* 0x22 JSL al */ op(absolute_long_jsl, JSL); /* 0x23 AND d, s */ op(stack_relative, AND); /* 0x24 BIT d */ op(direct, BIT); /* 0x25 AND d */ op(direct, AND); /* 0x26 ROL d */ op(direct_rmw, ROL); /* 0x27 AND [d] */ op(direct_indirect_long, AND); /* 0x28 PLP s */ op(stack_pull, PLP, AccessMode::Always8Bit); /* 0x29 AND # */ op(immediate, AND); /* 0x2a ROL A */ op(accumulator, ROL); /* 0x2b PLD s */ op(stack_pull, PLD, AccessMode::Always16Bit); /* 0x2c BIT a */ op(absolute, BIT); /* 0x2d AND a */ op(absolute, AND); /* 0x2e ROL a */ op(absolute_rmw, ROL); /* 0x2f AND al */ op(absolute_long, AND); /* 0x30 BMI r */ op(relative, BMI); /* 0x31 AND (d), y */ op(direct_indirect_indexed, AND); /* 0x32 AND (d) */ op(direct_indirect, AND); /* 0x33 AND (d, s), y */ op(stack_relative_indexed_indirect, AND); /* 0x34 BIT d, x */ op(direct_x, BIT); /* 0x35 AND d, x */ op(direct_x, AND); /* 0x36 ROL d, x */ op(direct_x_rmw, ROL); /* 0x37 AND [d], y */ op(direct_indirect_indexed_long, AND); /* 0x38 SEC i */ op(implied, SEC); /* 0x39 AND a, y */ op(absolute_y, AND); /* 0x3a DEC A */ op(accumulator, DEC); /* 0x3b TSC i */ op(implied, TSC); /* 0x3c BIT a, x */ op(absolute_x, BIT); /* 0x3d AND a, x */ op(absolute_x, AND); /* 0x3e ROL a, x */ op(absolute_x_rmw, ROL); /* 0x3f AND al, x */ op(absolute_long_x, AND); /* 0x40 RTI s */ op(stack_rti, RTI); /* 0x41 EOR (d, x) */ op(direct_indexed_indirect, EOR); /* 0x42 WDM i */ op(implied, WDM); /* 0x43 EOR d, s */ op(stack_relative, EOR); /* 0x44 MVP xyc */ op(block_move, MVP); /* 0x45 EOR d */ op(direct, EOR); /* 0x46 LSR d */ op(direct_rmw, LSR); /* 0x47 EOR [d] */ op(direct_indirect_long, EOR); /* 0x48 PHA s */ op(stack_push, STA); /* 0x49 EOR # */ op(immediate, EOR); /* 0x4a LSR A */ op(accumulator, LSR); /* 0x4b PHK s */ op(stack_push, PHK, AccessMode::Always8Bit); /* 0x4c JMP a */ op(absolute_jmp, JMP); /* 0x4d EOR a */ op(absolute, EOR); /* 0x4e LSR a */ op(absolute_rmw, LSR); /* 0x4f EOR al */ op(absolute_long, EOR); /* 0x50 BVC r */ op(relative, BVC); /* 0x51 EOR (d), y */ op(direct_indirect_indexed, EOR); /* 0x52 EOR (d) */ op(direct_indirect, EOR); /* 0x53 EOR (d, s), y */ op(stack_relative_indexed_indirect, EOR); /* 0x54 MVN xyc */ op(block_move, MVN); /* 0x55 EOR d, x */ op(direct_x, EOR); /* 0x56 LSR d, x */ op(direct_x_rmw, LSR); /* 0x57 EOR [d], y */ op(direct_indirect_indexed_long, EOR); /* 0x58 CLI i */ op(implied, CLI); /* 0x59 EOR a, y */ op(absolute_y, EOR); /* 0x5a PHY s */ op(stack_push, STY); /* 0x5b TCD i */ op(implied, TCD); /* 0x5c JMP al */ op(absolute_long_jmp, JML); // [sic]; this updates PBR so it's JML. /* 0x5d EOR a, x */ op(absolute_x, EOR); /* 0x5e LSR a, x */ op(absolute_x_rmw, LSR); /* 0x5f EOR al, x */ op(absolute_long_x, EOR); /* 0x60 RTS s */ op(stack_rts, RTS); /* 0x61 ADC (d, x) */ op(direct_indexed_indirect, ADC); /* 0x62 PER s */ op(stack_per, NOP, AccessMode::Always16Bit); /* 0x63 ADC d, s */ op(stack_relative, ADC); /* 0x64 STZ d */ op(direct, STZ); /* 0x65 ADC d */ op(direct, ADC); /* 0x66 ROR d */ op(direct_rmw, ROR); /* 0x67 ADC [d] */ op(direct_indirect_long, ADC); /* 0x68 PLA s */ op(stack_pull, LDA); /* 0x69 ADC # */ op(immediate, ADC); /* 0x6a ROR A */ op(accumulator, ROR); /* 0x6b RTL s */ op(stack_rtl, RTL); /* 0x6c JMP (a) */ op(absolute_indirect_jmp, JMPind); /* 0x6d ADC a */ op(absolute, ADC); /* 0x6e ROR a */ op(absolute_rmw, ROR); /* 0x6f ADC al */ op(absolute_long, ADC); /* 0x70 BVS r */ op(relative, BVS); /* 0x71 ADC (d), y */ op(direct_indirect_indexed, ADC); /* 0x72 ADC (d) */ op(direct_indirect, ADC); /* 0x73 ADC (d, s), y */ op(stack_relative_indexed_indirect, ADC); /* 0x74 STZ d, x */ op(direct_x, STZ); /* 0x75 ADC d, x */ op(direct_x, ADC); /* 0x76 ROR d, x */ op(direct_x_rmw, ROR); /* 0x77 ADC [d], y */ op(direct_indirect_indexed_long, ADC); /* 0x78 SEI i */ op(implied, SEI); /* 0x79 ADC a, y */ op(absolute_y, ADC); /* 0x7a PLY s */ op(stack_pull, LDY); /* 0x7b TDC i */ op(implied, TDC); /* 0x7c JMP (a, x) */ op(absolute_indexed_indirect_jmp, JMPind); /* 0x7d ADC a, x */ op(absolute_x, ADC); /* 0x7e ROR a, x */ op(absolute_x_rmw, ROR); /* 0x7f ADC al, x */ op(absolute_long_x, ADC); /* 0x80 BRA r */ op(relative, BRA); /* 0x81 STA (d, x) */ op(direct_indexed_indirect, STA); /* 0x82 BRL rl */ op(relative_long, BRL); /* 0x83 STA d, s */ op(stack_relative, STA); /* 0x84 STY d */ op(direct, STY); /* 0x85 STA d */ op(direct, STA); /* 0x86 STX d */ op(direct, STX); /* 0x87 STA [d] */ op(direct_indirect_long, STA); /* 0x88 DEY i */ op(implied, DEY); /* 0x89 BIT # */ op(immediate, BITimm); /* 0x8a TXA i */ op(implied, TXA); /* 0x8b PHB s */ op(stack_push, PHB, AccessMode::Always8Bit); /* 0x8c STY a */ op(absolute, STY); /* 0x8d STA a */ op(absolute, STA); /* 0x8e STX a */ op(absolute, STX); /* 0x8f STA al */ op(absolute_long, STA); /* 0x90 BCC r */ op(relative, BCC); /* 0x91 STA (d), y */ op(direct_indirect_indexed, STA); /* 0x92 STA (d) */ op(direct_indirect, STA); /* 0x93 STA (d, s), y */ op(stack_relative_indexed_indirect, STA); /* 0x94 STY d, x */ op(direct_x, STY); /* 0x95 STA d, x */ op(direct_x, STA); /* 0x96 STX d, y */ op(direct_y, STX); /* 0x97 STA [d], y */ op(direct_indirect_indexed_long, STA); /* 0x98 TYA i */ op(implied, TYA); /* 0x99 STA a, y */ op(absolute_y, STA); /* 0x9a TXS i */ op(implied, TXS); /* 0x9b TXY i */ op(implied, TXY); /* 0x9c STZ a */ op(absolute, STZ); /* 0x9d STA a, x */ op(absolute_x, STA); /* 0x9e STZ a, x */ op(absolute_x, STZ); /* 0x9f STA al, x */ op(absolute_long_x, STA); /* 0xa0 LDY # */ op(immediate, LDY); /* 0xa1 LDA (d, x) */ op(direct_indexed_indirect, LDA); /* 0xa2 LDX # */ op(immediate, LDX); /* 0xa3 LDA d, s */ op(stack_relative, LDA); /* 0xa4 LDY d */ op(direct, LDY); /* 0xa5 LDA d */ op(direct, LDA); /* 0xa6 LDX d */ op(direct, LDX); /* 0xa7 LDA [d] */ op(direct_indirect_long, LDA); /* 0xa8 TAY i */ op(implied, TAY); /* 0xa9 LDA # */ op(immediate, LDA); /* 0xaa TAX i */ op(implied, TAX); /* 0xab PLB s */ op(stack_pull, PLB, AccessMode::Always8Bit); /* 0xac LDY a */ op(absolute, LDY); /* 0xad LDA a */ op(absolute, LDA); /* 0xae LDX a */ op(absolute, LDX); /* 0xaf LDA al */ op(absolute_long, LDA); /* 0xb0 BCS r */ op(relative, BCS); /* 0xb1 LDA (d), y */ op(direct_indirect_indexed, LDA); /* 0xb2 LDA (d) */ op(direct_indirect, LDA); /* 0xb3 LDA (d, s), y */ op(stack_relative_indexed_indirect, LDA); /* 0xb4 LDY d, x */ op(direct_x, LDY); /* 0xb5 LDA d, x */ op(direct_x, LDA); /* 0xb6 LDX d, y */ op(direct_y, LDX); /* 0xb7 LDA [d], y */ op(direct_indirect_indexed_long, LDA); /* 0xb8 CLV i */ op(implied, CLV); /* 0xb9 LDA a, y */ op(absolute_y, LDA); /* 0xba TSX i */ op(implied, TSX); /* 0xbb TYX i */ op(implied, TYX); /* 0xbc LDY a, x */ op(absolute_x, LDY); /* 0xbd LDA a, x */ op(absolute_x, LDA); /* 0xbe LDX a, y */ op(absolute_y, LDX); /* 0xbf LDA al, x */ op(absolute_long_x, LDA); /* 0xc0 CPY # */ op(immediate, CPY); /* 0xc1 CMP (d, x) */ op(direct_indexed_indirect, CMP); /* 0xc2 REP # */ op(immediate_rep_sep, REP); /* 0xc3 CMP d, s */ op(stack_relative, CMP); /* 0xc4 CPY d */ op(direct, CPY); /* 0xc5 CMP d */ op(direct, CMP); /* 0xc6 DEC d */ op(direct_rmw, DEC); /* 0xc7 CMP [d] */ op(direct_indirect_long, CMP); /* 0xc8 INY i */ op(implied, INY); /* 0xc9 CMP # */ op(immediate, CMP); /* 0xca DEX i */ op(implied, DEX); /* 0xcb WAI i */ op(stp_wai, WAI); /* 0xcc CPY a */ op(absolute, CPY); /* 0xcd CMP a */ op(absolute, CMP); /* 0xce DEC a */ op(absolute_rmw, DEC); /* 0xcf CMP al */ op(absolute_long, CMP); /* 0xd0 BNE r */ op(relative, BNE); /* 0xd1 CMP (d), y */ op(direct_indirect_indexed, CMP); /* 0xd2 CMP (d) */ op(direct_indirect, CMP); /* 0xd3 CMP (d, s), y */ op(stack_relative_indexed_indirect, CMP); /* 0xd4 PEI s */ op(stack_pei, NOP, AccessMode::Always16Bit); /* 0xd5 CMP d, x */ op(direct_x, CMP); /* 0xd6 DEC d, x */ op(direct_x_rmw, DEC); /* 0xd7 CMP [d], y */ op(direct_indirect_indexed_long, CMP); /* 0xd8 CLD i */ op(implied, CLD); /* 0xd9 CMP a, y */ op(absolute_y, CMP); /* 0xda PHX s */ op(stack_push, STX); /* 0xdb STP i */ op(stp_wai, STP); /* 0xdc JML (a) */ op(absolute_indirect_jml, JML); /* 0xdd CMP a, x */ op(absolute_x, CMP); /* 0xde DEC a, x */ op(absolute_x_rmw, DEC); /* 0xdf CMP al, x */ op(absolute_long_x, CMP); /* 0xe0 CPX # */ op(immediate, CPX); /* 0xe1 SBC (d, x) */ op(direct_indexed_indirect, SBC); /* 0xe2 SEP # */ op(immediate_rep_sep, SEP); /* 0xe3 SBC d, s */ op(stack_relative, SBC); /* 0xe4 CPX d */ op(direct, CPX); /* 0xe5 SBC d */ op(direct, SBC); /* 0xe6 INC d */ op(direct_rmw, INC); /* 0xe7 SBC [d] */ op(direct_indirect_long, SBC); /* 0xe8 INX i */ op(implied, INX); /* 0xe9 SBC # */ op(immediate, SBC); /* 0xea NOP i */ op(implied, NOP); /* 0xeb XBA i */ op(implied_xba, XBA); /* 0xec CPX a */ op(absolute, CPX); /* 0xed SBC a */ op(absolute, SBC); /* 0xee INC a */ op(absolute_rmw, INC); /* 0xef SBC al */ op(absolute_long, SBC); /* 0xf0 BEQ r */ op(relative, BEQ); /* 0xf1 SBC (d), y */ op(direct_indirect_indexed, SBC); /* 0xf2 SBC (d) */ op(direct_indirect, SBC); /* 0xf3 SBC (d, s), y */ op(stack_relative_indexed_indirect, SBC); /* 0xf4 PEA s */ op(stack_pea, NOP, AccessMode::Always16Bit); /* 0xf5 SBC d, x */ op(direct_x, SBC); /* 0xf6 INC d, x */ op(direct_x_rmw, INC); /* 0xf7 SBC [d], y */ op(direct_indirect_indexed_long, SBC); /* 0xf8 SED i */ op(implied, SED); /* 0xf9 SBC a, y */ op(absolute_y, SBC); /* 0xfa PLX s */ op(stack_pull, LDX); /* 0xfb XCE i */ op(implied, XCE); /* 0xfc JSR (a, x) */ op(absolute_indexed_indirect_jsr, JMPind); // [sic] /* 0xfd SBC a, x */ op(absolute_x, SBC); /* 0xfe INC a, x */ op(absolute_x_rmw, INC); /* 0xff SBC al, x */ op(absolute_long_x, SBC); #undef op constructor.set_exception_generator(&ProcessorStorageConstructor::stack_exception, &ProcessorStorageConstructor::reset); constructor.install_fetch_decode_execute(); // Find any OperationMoveToNextProgram. next_op_ = micro_ops_.data(); while(*next_op_ != OperationMoveToNextProgram) ++next_op_; // This is primarily to keep tabs, in case I want to pick a shorter form for the instruction table. assert(micro_ops_.size() < 1024); } void ProcessorStorage::set_reset_state() { registers_.data_bank = 0; registers_.program_bank = 0; registers_.direct = 0; registers_.flags.decimal = 0; registers_.flags.inverse_interrupt = 0; set_emulation_mode(true); } void ProcessorStorage::set_emulation_mode(bool enabled) { if(registers_.emulation_flag == enabled) { return; } registers_.emulation_flag = enabled; if(enabled) { set_m_x_flags(true, true); registers_.e_masks[0] = 0xff00; registers_.e_masks[1] = 0x00ff; } else { registers_.e_masks[0] = 0x0000; registers_.e_masks[1] = 0xffff; registers_.s.halves.high = 1; // To pretend it was 1 all along; this implementation actually ignores // the top byte while in emulation mode. } } void ProcessorStorage::set_m_x_flags(bool m, bool x) { registers_.x_mask = x ? 0x00ff : 0xffff; registers_.x_shift = x ? 0 : 8; registers_.x.full &= registers_.x_mask; registers_.y.full &= registers_.x_mask; registers_.m_masks[0] = m ? 0xff00 : 0x0000; registers_.m_masks[1] = m ? 0x00ff : 0xffff; registers_.m_shift = m ? 0 : 8; // true/1 => 8bit for both flags. registers_.mx_flags[0] = m; registers_.mx_flags[1] = x; } uint8_t ProcessorStorage::get_flags() const { uint8_t result = registers_.flags.get(); if(!registers_.emulation_flag) { result &= ~(Flag::MemorySize | Flag::IndexSize); result |= registers_.mx_flags[0] * Flag::MemorySize; result |= registers_.mx_flags[1] * Flag::IndexSize; } return result; } void ProcessorStorage::set_flags(uint8_t value) { registers_.flags.set(value); if(!registers_.emulation_flag) { set_m_x_flags(value & Flag::MemorySize, value & Flag::IndexSize); } }