//
//  TIA.cpp
//  Clock Signal
//
//  Created by Thomas Harte on 28/01/2017.
//  Copyright © 2017 Thomas Harte. All rights reserved.
//

#include "TIA.hpp"

using namespace Atari2600;
namespace {
	const int cycles_per_line = 228;

	const int sync_flag	= 0x1;
	const int blank_flag = 0x2;
}

TIA::TIA() :
	horizontal_counter_(0),
	output_cursor_(0),
	pixel_target_(nullptr),
	requested_output_mode_(0),
	output_mode_(0)
{
	crt_.reset(new Outputs::CRT::CRT(cycles_per_line * 2 + 1, 1, Outputs::CRT::DisplayType::NTSC60, 1));
	crt_->set_output_device(Outputs::CRT::Television);
	set_output_mode(OutputMode::NTSC);
}

void TIA::set_output_mode(Atari2600::TIA::OutputMode output_mode)
{
	// this is the NTSC phase offset function; see below for PAL
	crt_->set_composite_sampling_function(
		"float composite_sample(usampler2D texID, vec2 coordinate, vec2 iCoordinate, float phase, float amplitude)"
		"{"
			"uint c = texture(texID, coordinate).r;"
			"uint y = c & 14u;"
			"uint iPhase = (c >> 4);"

			"float phaseOffset = 6.283185308 * float(iPhase) / 13.0  + 5.074880441076923;"
			"return mix(float(y) / 14.0, step(1, iPhase) * cos(phase + phaseOffset), amplitude);"
		"}");
/*	speaker_->set_input_rate((float)(get_clock_rate() / 38.0));*/
}

TIA::~TIA()
{
}

/*void Machine::switch_region()
{
	// the PAL function
	crt_->set_composite_sampling_function(
		"float composite_sample(usampler2D texID, vec2 coordinate, vec2 iCoordinate, float phase, float amplitude)"
		"{"
			"uint c = texture(texID, coordinate).r;"
			"uint y = c & 14u;"
			"uint iPhase = (c >> 4);"

			"uint direction = iPhase & 1u;"
			"float phaseOffset = float(7u - direction) + (float(direction) - 0.5) * 2.0 * float(iPhase >> 1);"
			"phaseOffset *= 6.283185308 / 12.0;"
			"return mix(float(y) / 14.0, step(4, (iPhase + 2u) & 15u) * cos(phase + phaseOffset), amplitude);"
		"}");

	crt_->set_new_timing(228, 312, Outputs::CRT::ColourSpace::YUV, 228, 1, true);

	is_pal_region_ = true;
	speaker_->set_input_rate((float)(get_clock_rate() / 38.0));
	set_clock_rate(PAL_clock_rate);
}*/

						// justification for +5: "we need to wait at least 71 [clocks] before the HMOVE operation is complete";
						// which will take 16*4 + 2 = 66 cycles from the first compare, implying the first compare must be
						// in five cycles from now


void TIA::run_for_cycles(int number_of_cycles)
{
	// if part way through a line, definitely perform a partial, at most up to the end of the line
	if(horizontal_counter_)
	{
		int cycles = std::min(number_of_cycles, cycles_per_line - horizontal_counter_);
		output_for_cycles(cycles);
		number_of_cycles -= cycles;
	}

	// output full lines for as long as possible
	while(number_of_cycles >= cycles_per_line)
	{
		output_line();
		number_of_cycles -= cycles_per_line;
	}

	// partly start a new line if necessary
	if(number_of_cycles)
	{
		output_for_cycles(number_of_cycles);
	}
}

void TIA::set_sync(bool sync)
{
	requested_output_mode_ = (requested_output_mode_ & ~sync_flag) | (sync ? sync_flag : 0);
}

void TIA::set_blank(bool blank)
{
	requested_output_mode_ = (requested_output_mode_ & ~blank_flag) | (blank ? blank_flag : 0);
}

void TIA::reset_horizontal_counter()
{
}

int TIA::get_cycles_until_horizontal_blank(unsigned int from_offset)
{
	return cycles_per_line - (horizontal_counter_ + (int)from_offset) % cycles_per_line;
}

void TIA::set_background_colour(uint8_t colour)
{
}

void TIA::set_playfield(uint16_t offset, uint8_t value)
{
}

void TIA::set_playfield_control_and_ball_size(uint8_t value)
{
}

void TIA::set_playfield_ball_colour(uint8_t colour)
{
}

void TIA::set_player_number_and_size(int player, uint8_t value)
{
}

void TIA::set_player_graphic(int player, uint8_t value)
{
}

void TIA::set_player_reflected(int player, bool reflected)
{
}

void TIA::set_player_delay(int player, bool delay)
{
}

void TIA::set_player_position(int player)
{
}

void TIA::set_player_motion(int player, uint8_t motion)
{
}

void TIA::set_player_missile_colour(int player, uint8_t colour)
{
}

void TIA::set_missile_enable(int missile, bool enabled)
{
}

void TIA::set_missile_position(int missile)
{
}

void TIA::set_missile_position_to_player(int missile)
{
}

void TIA::set_missile_motion(int missile, uint8_t motion)
{
}

void TIA::set_ball_enable(bool enabled)
{
}

void TIA::set_ball_delay(bool delay)
{
}

void TIA::set_ball_position()
{
}

void TIA::set_ball_motion(uint8_t motion)
{
}

void TIA::move()
{
}

void TIA::clear_motion()
{
}

uint8_t TIA::get_collision_flags(int offset)
{
	return 0xff;
}

void TIA::clear_collision_flags()
{
}

//				case 0: case 1: case 2: case 3:					state = OutputState::Blank;									break;
//				case 4: case 5: case 6: case 7:					state = OutputState::Sync;									break;
//				case 8: case 9: case 10: case 11:				state = OutputState::ColourBurst;							break;
//				case 12: case 13: case 14:
//				case 15: case 16:								state = OutputState::Blank;									break;
//
//				case 17: case 18:								state = vbextend ? OutputState::Blank : OutputState::Pixel;	break;
//				default:										state = OutputState::Pixel;									break;

void TIA::output_for_cycles(int number_of_cycles)
{
	/*
		Line timing is oriented around 0 being the start of the right-hand side vertical blank;
		a wsync synchronises the CPU to horizontal_counter_ = 0. All timing below is in terms of the
		NTSC colour clock.

		Therefore, each line is composed of:
		
			16 cycles:	blank					; -> 16
			16 cycles:	sync					; -> 32
			16 cycles:	colour burst			; -> 48
			20 cycles:	blank					; -> 68
			8 cycles:	blank or pixels, depending on whether the blank extend bit is set
			152 cycles:	pixels
	*/
//	if(output_mode_ != requested_output_mode_)
//	{
//		// flush the old output
//	}
	horizontal_counter_ += number_of_cycles;

	if(!output_cursor_ && horizontal_counter_ >= 16)
	{
		crt_->output_blank(32);
		output_cursor_ = 16;
	}
	if(output_cursor_ == 16 && horizontal_counter_ >= 32)
	{
		crt_->output_sync(32);
		output_cursor_ = 32;
	}
	if(output_cursor_ == 32 && horizontal_counter_ >= 48)
	{
		crt_->output_default_colour_burst(32);
		output_cursor_ = 48;
	}
	if(output_cursor_ == 48 && horizontal_counter_ >= 68)
	{
		crt_->output_blank(40);
		output_cursor_ = 68;
	}
	if(horizontal_counter_ > 68)
	{
		if(output_cursor_ == 68)
		{
			pixel_target_ = crt_->allocate_write_area(160);
		}
		if(pixel_target_)
		{
			while(output_cursor_ < horizontal_counter_)
			{
				pixel_target_[output_cursor_ - 68] = (output_cursor_&1) ? 0xff : 0x00;
				output_cursor_++;
			}
		} else output_cursor_ = horizontal_counter_;
		if(horizontal_counter_ == cycles_per_line)
		{
			crt_->output_data(320, 2);
			pixel_target_ = nullptr;
		}
	}
	horizontal_counter_ %= cycles_per_line;
	output_cursor_ %= cycles_per_line;
}

void TIA::output_line()
{
	output_mode_ = requested_output_mode_;
	switch(output_mode_)
	{
		default:
			// TODO: optimise special case
			output_for_cycles(cycles_per_line);
		break;
		case sync_flag:
		case sync_flag | blank_flag:
			crt_->output_sync(32);
			crt_->output_blank(32);
			crt_->output_sync(392);
		break;
		case blank_flag:
			crt_->output_blank(32);
			crt_->output_sync(32);
			crt_->output_default_colour_burst(32);
			crt_->output_blank(360);
		break;
	}
}