//
//  Enterprise.cpp
//  Clock Signal
//
//  Created by Thomas Harte on 10/06/2021.
//  Copyright © 2021 Thomas Harte. All rights reserved.
//

#include "Enterprise.hpp"

#include "Dave.hpp"
#include "EXDos.hpp"
#include "Keyboard.hpp"
#include "Nick.hpp"

#include "../MachineTypes.hpp"
#include "../Utility/Typer.hpp"

#include "../../Analyser/Static/Enterprise/Target.hpp"
#include "../../ClockReceiver/JustInTime.hpp"
#include "../../Outputs/Log.hpp"
#include "../../Outputs/Speaker/Implementation/LowpassSpeaker.hpp"
#include "../../Processors/Z80/Z80.hpp"

namespace {
Log::Logger<Log::Source::Enterprise> logger;
}

namespace Enterprise {

/*
	Notes to self on timing:

	Nick divides each line into 57 windows; each window lasts 16 cycles and dedicates the
	first 10 of those to VRAM accesses, leaving the final six for a Z80 video RAM access
	if one has been requested.

	The Z80 has a separate, asynchronous 4Mhz clock. That's that.

	The documentation is also very forward in emphasising that Nick generates phaselocked
	(i.e. in-phase) PAL video.

	So: 57*16 = 912 cycles/line.

	A standard PAL line lasts 64µs and during that time outputs 283.7516 colour cycles.

	I shall _guess_ that the Enterprise stretches each line to 284 colour cycles rather than
	reducing it to 283.

	Therefore 912 cycles occurs in 284/283.7516 * 64 µs.

	So one line = 181760000 / 2837516 µs = 45440000 / 709379 µs
	=> one cycle = 45440000 / 709379*912 = 45440000 / 646953648 = 2840000 / 40434603 µs
	=> clock rate of 40434603 / 2840000 Mhz

	And, therefore, the ratio to a 4Mhz Z80 clock is:

		40434603 / (2840000 * 4)
		= 40434603 / 11360000
		i.e. roughly 3.55 Nick cycles per Z80 cycle.

	If that's true then the 6-cycle window is around 1.69 Z80 cycles long. Given that the Z80
	clock in an Enterprise can be stopped in half-cycle increments only, the Z80 can only be
	guaranteed to have around a 1.19 cycle minimum for its actual access. I'm therefore further
	postulating that the clock stoppage takes place so as to align the final cycle of a relevant
	access over the available window.

*/

template <bool has_disk_controller, bool is_6mhz> class ConcreteMachine:
	public Activity::Source,
	public Configurable::Device,
	public CPU::Z80::BusHandler,
	public Machine,
	public MachineTypes::AudioProducer,
	public MachineTypes::MappedKeyboardMachine,
	public MachineTypes::MediaTarget,
	public MachineTypes::ScanProducer,
	public MachineTypes::TimedMachine,
	public Utility::TypeRecipient<CharacterMapper> {
	private:
		constexpr uint8_t min_ram_slot(const Analyser::Static::Enterprise::Target &target) {
			size_t ram_size = 128*1024;
			switch(target.model) {
				case Analyser::Static::Enterprise::Target::Model::Enterprise64:		ram_size = 64*1024;		break;
				case Analyser::Static::Enterprise::Target::Model::Enterprise128:	ram_size = 128*1024;	break;
				case Analyser::Static::Enterprise::Target::Model::Enterprise256:	ram_size = 256*1024;	break;
			}

			return uint8_t(0x100 - ram_size / 0x4000);
		}

		static constexpr double clock_rate = is_6mhz ? 6'000'000.0 : 4'000'000.0;
		using NickType =
			std::conditional_t<is_6mhz,
				JustInTimeActor<Nick, HalfCycles, 13478201, 5680000>,
				JustInTimeActor<Nick, HalfCycles, 40434603, 11360000>>;

	public:
		ConcreteMachine(const Analyser::Static::Enterprise::Target &target, const ROMMachine::ROMFetcher &rom_fetcher) :
			min_ram_slot_(min_ram_slot(target)),
			z80_(*this),
			nick_(ram_.end() - 65536),
			dave_audio_(audio_queue_),
			speaker_(dave_audio_) {

			// Request a clock of 4Mhz; this'll be mapped upwards for Nick and downwards for Dave elsewhere.
			set_clock_rate(clock_rate);
			speaker_.set_input_rate(float(clock_rate) / float(dave_divider));

			ROM::Request request;
			using Target = Analyser::Static::Enterprise::Target;

			// Pick one or more EXOS ROMs.
			switch(target.exos_version) {
				case Target::EXOSVersion::v10:	request = request && ROM::Request(ROM::Name::EnterpriseEXOS10);	break;
				case Target::EXOSVersion::v20:	request = request && ROM::Request(ROM::Name::EnterpriseEXOS20);	break;
				case Target::EXOSVersion::v21:	request = request && ROM::Request(ROM::Name::EnterpriseEXOS21);	break;
				case Target::EXOSVersion::v23:	request = request && ROM::Request(ROM::Name::EnterpriseEXOS23);	break;
				case Target::EXOSVersion::Any:
					request =
						request && (
							ROM::Request(ROM::Name::EnterpriseEXOS10) || ROM::Request(ROM::Name::EnterpriseEXOS20) ||
							ROM::Request(ROM::Name::EnterpriseEXOS21) || ROM::Request(ROM::Name::EnterpriseEXOS23)
						);
				break;

				default: break;
			}

			// Similarly pick one or more BASIC ROMs.
			switch(target.basic_version) {
				case Target::BASICVersion::v10:
					request = request && (
						ROM::Request(ROM::Name::EnterpriseBASIC10) ||
						(ROM::Request(ROM::Name::EnterpriseBASIC10Part1) && ROM::Request(ROM::Name::EnterpriseBASIC10Part2))
					);
				break;
				case Target::BASICVersion::v11:
					request = request && (
						ROM::Request(ROM::Name::EnterpriseBASIC11) ||
						ROM::Request(ROM::Name::EnterpriseBASIC11Suffixed)
					);
				break;
				case Target::BASICVersion::v21:
					request = request && ROM::Request(ROM::Name::EnterpriseBASIC21);
				break;
				case Target::BASICVersion::Any:
					request =
						request && (
							ROM::Request(ROM::Name::EnterpriseBASIC10) ||
							(ROM::Request(ROM::Name::EnterpriseBASIC10Part1) && ROM::Request(ROM::Name::EnterpriseBASIC10Part2)) ||
							ROM::Request(ROM::Name::EnterpriseBASIC11) ||
							ROM::Request(ROM::Name::EnterpriseBASIC21)
						);
				break;

				default: break;
			}

			// Possibly add in a DOS.
			switch(target.dos) {
				case Target::DOS::EXDOS:			request = request && ROM::Request(ROM::Name::EnterpriseEXDOS);	break;
				default: break;
			}

			// Get and validate ROMs.
			auto roms = rom_fetcher(request);
			if(!request.validate(roms)) {
				throw ROMMachine::Error::MissingROMs;
			}

			// Extract the appropriate EXOS ROM.
			exos_.fill(0xff);
			for(const auto rom_name: { ROM::Name::EnterpriseEXOS10, ROM::Name::EnterpriseEXOS20, ROM::Name::EnterpriseEXOS21, ROM::Name::EnterpriseEXOS23 }) {
				const auto exos = roms.find(rom_name);
				if(exos != roms.end()) {
					memcpy(exos_.data(), exos->second.data(), std::min(exos_.size(), exos->second.size()));
					break;
				}
			}

			// Extract the appropriate BASIC ROM[s] (if any).
			basic_.fill(0xff);
			bool has_basic = false;
			for(const auto rom_name: { ROM::Name::EnterpriseBASIC10, ROM::Name::EnterpriseBASIC11, ROM::Name::EnterpriseBASIC11Suffixed, ROM::Name::EnterpriseBASIC21 }) {
				const auto basic = roms.find(rom_name);
				if(basic != roms.end()) {
					memcpy(basic_.data(), basic->second.data(), std::min(basic_.size(), basic->second.size()));
					has_basic = true;
					break;
				}
			}
			if(!has_basic) {
				const auto basic1 = roms.find(ROM::Name::EnterpriseBASIC10Part1);
				const auto basic2 = roms.find(ROM::Name::EnterpriseBASIC10Part2);
				if(basic1 != roms.end() && basic2 != roms.end()) {
					memcpy(&basic_[0x0000], basic1->second.data(), std::min(size_t(8192), basic1->second.size()));
					memcpy(&basic_[0x2000], basic2->second.data(), std::min(size_t(8192), basic2->second.size()));
				}
			}

			// Extract the appropriate DOS ROMs.
			epdos_rom_.fill(0xff);
			const auto epdos = roms.find(ROM::Name::EnterpriseEPDOS);
			if(epdos != roms.end()) {
				memcpy(epdos_rom_.data(), epdos->second.data(), std::min(epdos_rom_.size(), epdos->second.size()));
			}
			exdos_rom_.fill(0xff);
			const auto exdos = roms.find(ROM::Name::EnterpriseEXDOS);
			if(exdos != roms.end()) {
				memcpy(exdos_rom_.data(), exdos->second.data(), std::min(exdos_rom_.size(), exdos->second.size()));
			}

			// Seed key state.
			clear_all_keys();

			// Take a reasonable guess at the initial memory configuration:
			// put EXOS into the first bank since this is a Z80 and therefore
			// starts from address 0; the third instruction in EXOS is a jump
			// to $c02e so it's reasonable to assume EXOS is in the highest bank
			// too, and it appears to act correctly if it's the first 16kb that's
			// in the highest bank. From there I guess: all banks are initialised
			// to 0.
			page<0>(0x00);
			page<1>(0x00);
			page<2>(0x00);
			page<3>(0x00);

			// Pass on any media.
			insert_media(target.media);
			if(!target.loading_command.empty()) {
				type_string(target.loading_command);
			}

			// Ensure the splash screen is automatically skipped if any media has been provided.
			if(!target.media.empty()) {
				should_skip_splash_screen_ = !target.media.empty();
				typer_delay_ = 2;
			}
		}

		~ConcreteMachine() {
			audio_queue_.flush();
		}

		// MARK: - Z80::BusHandler.
		forceinline void advance_nick(HalfCycles duration) {
			if(nick_ += duration) {
				const auto nick = nick_.last_valid();
				const bool nick_interrupt_line = nick->get_interrupt_line();
				if(nick_interrupt_line && !previous_nick_interrupt_line_) {
					set_interrupts(uint8_t(Dave::Interrupt::Nick), nick_.last_sequence_point_overrun());
				}
				previous_nick_interrupt_line_ = nick_interrupt_line;
			}
		}

		forceinline HalfCycles perform_machine_cycle(const CPU::Z80::PartialMachineCycle &cycle) {
			using PartialMachineCycle = CPU::Z80::PartialMachineCycle;
			const uint16_t address = cycle.address ? *cycle.address : 0x0000;

			// Calculate an access penalty, if applicable.
			//
			// Rule applied here, which is slightly inferred:
			//
			//	Non-video reads and writes are delayed by exactly a cycle or not delayed at all,
			//	depending on the programmer's configuration of Dave.
			//
			//	Video reads and writes, and Nick port accesses, are delayed so that the last
			//	clock cycle of the machine cycle falls wholly inside the designated Z80 access
			//	window, per Nick.
			//
			// The switch statement below just attempts to implement that logic.
			//
			HalfCycles penalty;
			switch(cycle.operation) {
				default: break;

				// For non-video pauses, insert during the initial part of the bus cycle.
				case PartialMachineCycle::ReadStart:
				case PartialMachineCycle::WriteStart:
					if(!is_video_[address >> 14] && wait_mode_ == WaitMode::OnAllAccesses) {
						penalty = dave_delay_;
					}
				break;
				case PartialMachineCycle::ReadOpcodeStart: {
					if(is_video_[address >> 14]) {
						// Query Nick for the amount of delay that would occur with one cycle left
						// in this read opcode.
						const auto delay_time = nick_.time_since_flush(HalfCycles(2));
						const auto delay = nick_.last_valid()->get_time_until_z80_slot(delay_time);
						penalty = nick_.back_map(delay, delay_time);
					} else if(wait_mode_ != WaitMode::None) {
						penalty = dave_delay_;
					}
				} break;

				// Video pauses: insert right at the end of the bus cycle.
				case PartialMachineCycle::Write:
					// Ensure all video that should have been collected prior to
					// this write has been.
					if(is_video_[address >> 14]) {
						nick_.flush();
					}
					[[fallthrough]];

				case PartialMachineCycle::Read:
					if(is_video_[address >> 14]) {
						// Get delay, in Nick cycles, for a Z80 access that occurs in 0.5
						// cycles from now (i.e. with one cycle left to run).
						const auto delay_time = nick_.time_since_flush(HalfCycles(1));
						const auto delay = nick_.last_valid()->get_time_until_z80_slot(delay_time);
						penalty = nick_.back_map(delay, delay_time);
					}
				break;

				case PartialMachineCycle::Input:
				case PartialMachineCycle::Output: {
					if((address & 0xf0) == 0x80) {
						// Get delay, in Nick cycles, for a Z80 access that occurs in 0.5
						// cycles from now (i.e. with one cycle left to run).
						const auto delay_time = nick_.time_since_flush(HalfCycles(1));
						const auto delay = nick_.last_valid()->get_time_until_z80_slot(delay_time);
						penalty = nick_.back_map(delay, delay_time);
					}
				}
			}

			const HalfCycles full_length = cycle.length + penalty;
			time_since_audio_update_ += full_length;
			advance_nick(full_length);
			if(dave_timer_ += full_length) {
				set_interrupts(dave_timer_.last_valid()->get_new_interrupts(), dave_timer_.last_sequence_point_overrun());
			}

			// The WD/etc runs at a nominal 8Mhz.
			if constexpr (has_disk_controller) {
				exdos_.run_for(Cycles(full_length.as_integral()));
			}

			switch(cycle.operation) {
				default: break;

				case PartialMachineCycle::Interrupt:
					*cycle.value = 0xff;
				break;

				case PartialMachineCycle::Input:
					switch(address & 0xff) {
						default:
							logger.error().append("Unhandled input from %02x", address & 0xff);
							*cycle.value = 0xff;
						break;

						case 0x10:	case 0x11:	case 0x12:	case 0x13:
						case 0x14:	case 0x15:	case 0x16:	case 0x17:
							if constexpr (has_disk_controller) {
								*cycle.value = exdos_.read(address);
							} else {
								*cycle.value = 0xff;
							}
						break;
						case 0x18:	case 0x19:	case 0x1a:	case 0x1b:
						case 0x1c:	case 0x1d:	case 0x1e:	case 0x1f:
							if constexpr (has_disk_controller) {
								*cycle.value = exdos_.get_control_register();
							} else {
								*cycle.value = 0xff;
							}
						break;

						case 0x80:	case 0x81:	case 0x82:	case 0x83:
						case 0x84:	case 0x85:	case 0x86:	case 0x87:
						case 0x88:	case 0x89:	case 0x8a:	case 0x8b:
						case 0x8c:	case 0x8d:	case 0x8e:	case 0x8f:
							*cycle.value = nick_->read();
						break;

						case 0xb0:	*cycle.value = pages_[0];	break;
						case 0xb1:	*cycle.value = pages_[1];	break;
						case 0xb2:	*cycle.value = pages_[2];	break;
						case 0xb3:	*cycle.value = pages_[3];	break;

						case 0xb4:
							*cycle.value =
								(nick_->get_interrupt_line() ? 0x10 : 0x00) |
								dave_timer_->get_divider_state() |
								interrupt_state_;
						break;
						case 0xb5:
							if(active_key_line_ < key_lines_.size()) {
								*cycle.value = key_lines_[active_key_line_];
							} else {
								*cycle.value = 0xff;
							}
						break;
						case 0xb6: {
							// TODO: selected keyboard row, 0 to 9, should return one bit of joystick
							// input. That being the case:
							//
							//	b0:		joystick input
							//	b1, b2:	unused (in theory read from control port, but not used by any hardware)
							//	b3:		0 = printer ready; 1 = not ready
							//	b4:		serial, data in
							//	b5:		serial, status in
							//	b6:		tape input volume level, 0 = high, 1 = low
							//	b7:		tape data input
							*cycle.value = 0xff;
						} break;
					}
				break;

				case PartialMachineCycle::Output:
					switch(address & 0xff) {
						default:
							logger.error().append("Unhandled output: %02x to %02x", *cycle.value, address & 0xff);
						break;

						case 0x10:	case 0x11:	case 0x12:	case 0x13:
						case 0x14:	case 0x15:	case 0x16:	case 0x17:
							if constexpr(has_disk_controller) {
								exdos_.write(address, *cycle.value);
							}
						break;
						case 0x18:	case 0x19:	case 0x1a:	case 0x1b:
						case 0x1c:	case 0x1d:	case 0x1e:	case 0x1f:
							if constexpr(has_disk_controller) {
								exdos_.set_control_register(*cycle.value);
							}
						break;

						case 0x80:	case 0x81:	case 0x82:	case 0x83:
						case 0x84:	case 0x85:	case 0x86:	case 0x87:
						case 0x88:	case 0x89:	case 0x8a:	case 0x8b:
						case 0x8c:	case 0x8d:	case 0x8e:	case 0x8f:
							nick_->write(address, *cycle.value);
						break;

						case 0xb0:	page<0>(*cycle.value);	break;
						case 0xb1:	page<1>(*cycle.value);	break;
						case 0xb2:	page<2>(*cycle.value);	break;
						case 0xb3:	page<3>(*cycle.value);	break;

						case 0xbf:
							switch((*cycle.value >> 2)&3) {
								default:	wait_mode_ = WaitMode::None;			break;
								case 0:		wait_mode_ = WaitMode::OnAllAccesses;	break;
								case 1:		wait_mode_ = WaitMode::OnM1;			break;
							}

							// Dave delays (i.e. those affecting memory areas not associated with Nick)
							// are one cycle in 8Mhz mode, two cycles in 12Mhz mode.
							dave_delay_ = HalfCycles(2 + ((*cycle.value)&2));

							[[fallthrough]];

						case 0xa0:	case 0xa1:	case 0xa2:	case 0xa3:
						case 0xa4:	case 0xa5:	case 0xa6:	case 0xa7:
						case 0xa8:	case 0xa9:	case 0xaa:	case 0xab:
						case 0xac:	case 0xad:	case 0xae:	case 0xaf:
							update_audio();
							dave_audio_.write(address, *cycle.value);
							dave_timer_->write(address, *cycle.value);
						break;

						case 0xb4:
							interrupt_mask_ = *cycle.value & 0x55;
							interrupt_state_ &= ~*cycle.value;
							update_interrupts();
						break;
						case 0xb5:
							// Logic here: the ROM scans the keyboard by checking ascending
							// lines. It also seems to provide a line of 0 when using port B5
							// for non-keyboard uses.
							//
							// So: use the rollover from line 9 back to line 0 as a trigger to
							// spot that a scan of the keyboard just finished. Which makes it
							// time to enqueue the next keypress.
							//
							// Re: should_skip_splash_screen_ and typer_delay_, assume that a
							// single keypress is necessary to get past the Enterprise splash
							// screen, then a pause in keypressing while BASIC or whatever
							// starts up, then presses can resume.
							if(active_key_line_ == 9 && !(*cycle.value & 0xf) && (should_skip_splash_screen_ || typer_)) {
								if(should_skip_splash_screen_) {
									set_key_state(uint16_t(Key::Space), typer_delay_);
									if(typer_delay_) {
										--typer_delay_;
									} else {
										typer_delay_ = 60;
										should_skip_splash_screen_ = false;
									}
								} else {
									if(!typer_delay_) {
										if(!typer_->type_next_character()) {
											clear_all_keys();
											typer_ = nullptr;
										}
									} else {
										--typer_delay_;
									}
								}
							}

							active_key_line_ = *cycle.value & 0xf;
							// TODO:
							//
							//	b4:	strobe output for printer
							//	b5:	tape sound control (?)
							//	b6:	tape motor control 1, 1 = on
							//	b7: tape motor control 2, 1 = on
						break;
						case 0xb6:
							// Just 8 bits of printer data.
							logger.info().append("TODO: printer output: %02x", *cycle.value);
						break;
						case 0xb7:
							// b0 = serial data out
							// b1 = serial status out
							logger.info().append("TODO: serial output: %02x", *cycle.value);
						break;
					}
				break;

				case PartialMachineCycle::Read:
				case PartialMachineCycle::ReadOpcode:
					if(read_pointers_[address >> 14]) {
						*cycle.value = read_pointers_[address >> 14][address];
					} else {
						*cycle.value = 0xff;
					}
				break;

				case PartialMachineCycle::Write:
					if(write_pointers_[address >> 14]) {
						write_pointers_[address >> 14][address] = *cycle.value;
					}
				break;
			}

			return penalty;
		}

		void flush_output(int outputs) final {
			if(outputs & Output::Video) {
				nick_.flush();
			}
			if(outputs & Output::Audio) {
				update_audio();
				audio_queue_.perform();
			}
		}

	private:
		// MARK: - Memory layout
		std::array<uint8_t, 256 * 1024> ram_{};
		std::array<uint8_t, 64 * 1024> exos_;
		std::array<uint8_t, 16 * 1024> basic_;
		std::array<uint8_t, 16 * 1024> exdos_rom_;
		std::array<uint8_t, 32 * 1024> epdos_rom_;
		const uint8_t min_ram_slot_;

		const uint8_t *read_pointers_[4] = {nullptr, nullptr, nullptr, nullptr};
		uint8_t *write_pointers_[4] = {nullptr, nullptr, nullptr, nullptr};
		uint8_t pages_[4] = {0x80, 0x80, 0x80, 0x80};

		template <size_t slot> void page(uint8_t offset) {
			pages_[slot] = offset;

#define Map(location, source)												\
	if(offset >= location && offset < location + source.size() / 0x4000) {	\
		page<slot>(&source[(offset - location) * 0x4000], nullptr);			\
		is_video_[slot] = false;											\
		return;																\
	}

			Map(0, exos_);
			Map(16, basic_);
			Map(32, exdos_rom_);
			Map(48, epdos_rom_);

#undef Map

			// Of whatever size of RAM I've declared above, use only the final portion.
			// This correlated with Nick always having been handed the final 64kb and,
			// at least while the RAM is the first thing declared above, does a little
			// to benefit data locality. Albeit not in a useful sense.
			if(offset >= min_ram_slot_) {
				const auto ram_floor = 4194304 - ram_.size();
				const size_t address = offset * 0x4000 - ram_floor;
				is_video_[slot] = offset >= 0xfc;	// TODO: this hard-codes a 64kb video assumption.
				page<slot>(&ram_[address], &ram_[address]);
				return;
			}

			page<slot>(nullptr, nullptr);
		}

		template <size_t slot> void page(const uint8_t *read, uint8_t *write) {
			read_pointers_[slot] = read ? read - (slot * 0x4000) : nullptr;
			write_pointers_[slot] = write ? write - (slot * 0x4000) : nullptr;
		}

		// MARK: - Memory Timing

		// The wait mode affects all memory accesses _outside of the video area_.
		enum class WaitMode {
			None,
			OnM1,
			OnAllAccesses
		} wait_mode_ = WaitMode::OnAllAccesses;
		bool is_video_[4]{};

		// MARK: - ScanProducer
		void set_scan_target(Outputs::Display::ScanTarget *scan_target) override {
			nick_.last_valid()->set_scan_target(scan_target);
		}

		Outputs::Display::ScanStatus get_scaled_scan_status() const override {
			return nick_.last_valid()->get_scaled_scan_status();
		}

		void set_display_type(Outputs::Display::DisplayType display_type) final {
			nick_.last_valid()->set_display_type(display_type);
		}

		Outputs::Display::DisplayType get_display_type() const final {
			return nick_.last_valid()->get_display_type();
		}

		// MARK: - AudioProducer

		Outputs::Speaker::Speaker *get_speaker() final {
			return &speaker_;
		}

		// MARK: - TimedMachine
		void run_for(const Cycles cycles) override {
			z80_.run_for(cycles);
		}

		// MARK: - KeyboardMachine
		Enterprise::KeyboardMapper keyboard_mapper_;
		KeyboardMapper *get_keyboard_mapper() final {
			return &keyboard_mapper_;
		}

		uint8_t active_key_line_ = 0;
		std::array<uint8_t, 10> key_lines_;
		void set_key_state(uint16_t key, bool is_pressed) final {
			if(is_pressed) {
				key_lines_[key >> 8] &= ~uint8_t(key);
			} else {
				key_lines_[key >> 8] |= uint8_t(key);
			}
		}

		void clear_all_keys() final {
			key_lines_.fill(0xff);
		}

		// MARK: - Utility::TypeRecipient
		void type_string(const std::string &string) final {
			Utility::TypeRecipient<CharacterMapper>::add_typer(string);

			if(z80_.get_is_resetting()) {
				should_skip_splash_screen_ = true;
				typer_delay_ = 1;
			} else {
				should_skip_splash_screen_ = false;
				typer_delay_ = 0;
			}
		}

		bool can_type(char c) const final {
			return Utility::TypeRecipient<CharacterMapper>::can_type(c);
		}

		bool should_skip_splash_screen_ = false;
		int typer_delay_ = 30;

		// MARK: - MediaTarget
		bool insert_media(const Analyser::Static::Media &media) final {
			if constexpr (has_disk_controller) {
				if(!media.disks.empty()) {
					exdos_.set_disk(media.disks.front(), 0);
				}
			}

			return true;
		}

		// MARK: - Interrupts

		uint8_t interrupt_mask_ = 0x00, interrupt_state_ = 0x00;
		void set_interrupts(uint8_t mask, HalfCycles offset = HalfCycles(0)) {
			interrupt_state_ |= uint8_t(mask);
			update_interrupts(offset);
		}
		void update_interrupts(HalfCycles offset = HalfCycles(0)) {
			z80_.set_interrupt_line((interrupt_state_ >> 1) & interrupt_mask_, offset);
		}

		// MARK: - Chips.
		CPU::Z80::Processor<ConcreteMachine, false, false> z80_;
		NickType nick_;
		bool previous_nick_interrupt_line_ = false;
		// Cf. timing guesses above.

		Concurrency::AsyncTaskQueue<false> audio_queue_;
		Dave::Audio dave_audio_;
		Outputs::Speaker::PullLowpass<Dave::Audio> speaker_;
		HalfCycles time_since_audio_update_;

		HalfCycles dave_delay_ = HalfCycles(2);

		// The divider supplied to the JustInTimeActor and the manual divider used in
		// update_audio() should match.
		static constexpr int dave_divider = 8;
		JustInTimeActor<Dave::TimedInterruptSource, HalfCycles, 1, dave_divider> dave_timer_;
		inline void update_audio() {
			speaker_.run_for(audio_queue_, time_since_audio_update_.divide_cycles(Cycles(dave_divider)));
		}

		// MARK: - EXDos card.
		EXDos exdos_;

		// MARK: - Activity Source
		void set_activity_observer([[maybe_unused]] Activity::Observer *observer) final {
			if constexpr (has_disk_controller) {
				exdos_.set_activity_observer(observer);
			}
		}

		// MARK: - Configuration options.
		std::unique_ptr<Reflection::Struct> get_options() final {
			auto options = std::make_unique<Options>(Configurable::OptionsType::UserFriendly);
			options->output = get_video_signal_configurable();
			return options;
		}

		void set_options(const std::unique_ptr<Reflection::Struct> &str) final {
			const auto options = dynamic_cast<Options *>(str.get());
			set_video_signal_configurable(options->output);
		}
};

}

using namespace Enterprise;

std::unique_ptr<Machine> Machine::Enterprise(const Analyser::Static::Target *target, const ROMMachine::ROMFetcher &rom_fetcher) {
	using Target = Analyser::Static::Enterprise::Target;
	const Target *const enterprise_target = dynamic_cast<const Target *>(target);

#define BuildMachine(exdos, sixmhz)																									\
	if((enterprise_target->dos == Target::DOS::None) != exdos && (enterprise_target->speed == Target::Speed::SixMHz) == sixmhz) {	\
		return std::make_unique<Enterprise::ConcreteMachine<exdos, sixmhz>>(*enterprise_target, rom_fetcher);						\
	}

	BuildMachine(false, false);
	BuildMachine(false, true);
	BuildMachine(true, false);
	BuildMachine(true, true);

#undef BuildMachine

	return nullptr;
}