1
0
mirror of https://github.com/TomHarte/CLK.git synced 2024-12-25 03:32:01 +00:00
CLK/InstructionSets/x86/Decoder.hpp
2022-03-11 09:48:02 -05:00

234 lines
7.7 KiB
C++

//
// Decoder.hpp
// Clock Signal
//
// Created by Thomas Harte on 01/01/21.
// Copyright © 2021 Thomas Harte. All rights reserved.
//
#ifndef InstructionSets_x86_Decoder_hpp
#define InstructionSets_x86_Decoder_hpp
#include "Instruction.hpp"
#include "Model.hpp"
#include <cstddef>
#include <utility>
namespace InstructionSet {
namespace x86 {
/*!
Implements Intel x86 instruction decoding.
This is an experimental implementation; it has not yet undergone significant testing.
*/
template <Model model> class Decoder {
public:
using InstructionT = Instruction<is_32bit(model)>;
/*!
@returns an @c Instruction plus a size; a positive size indicates successful decoding of
an instruction that was that many bytes long in total; a negative size specifies the [negatived]
minimum number of further bytes the caller should ideally collect before calling again. The
caller is free to call with fewer, but may not get a decoded instruction in response, and the
decoder may still not be able to complete decoding even if given that number of bytes.
Successful decoding is defined to mean that all decoding steps are complete. The output
may still be an illegal instruction (indicated by Operation::Invalid), if the byte sequence
supplied cannot form a valid instruction.
@discussion although instructions also contain an indicator of their length, on chips prior
to the 80286 there is no limit to instruction length and that could in theory overflow the available
storage, which can describe instructions only up to 1kb in size.
The 80286 and 80386 have instruction length limits of 10 and 15 bytes respectively, so
cannot overflow the field.
*/
std::pair<int, InstructionT> decode(const uint8_t *source, size_t length);
/*!
Enables or disables 32-bit protected mode. Meaningful only if the @c Model supports it.
*/
void set_32bit_protected_mode(bool);
private:
enum class Phase {
/// Captures all prefixes and continues until an instruction byte is encountered.
Instruction,
/// Having encountered a 0x0f first instruction byte, waits for the next byte fully to determine the instruction.
InstructionPageF,
/// Receives a ModRegRM byte and either populates the source_ and dest_ fields appropriately
/// or completes decoding of the instruction, as per the instruction format.
ModRegRM,
/// Awaits n 80386+-style scale-index-base byte ('SIB'), indicating the form of indirect addressing.
ScaleIndexBase,
/// Waits for sufficiently many bytes to pass for the required displacement and operand to be captured.
/// Cf. displacement_size_ and operand_size_.
DisplacementOrOperand,
/// Forms and returns an Instruction, and resets parsing state.
ReadyToPost
} phase_ = Phase::Instruction;
/// During the ModRegRM phase, format dictates interpretation of the ModRegRM byte.
///
/// During the ReadyToPost phase, format determines how transiently-recorded fields
/// are packaged into an Instruction.
enum class ModRegRMFormat: uint8_t {
// Parse the ModRegRM for mode, register and register/memory fields
// and populate the source_ and destination_ fields appropriately.
MemReg_Reg,
Reg_MemReg,
// Parse for mode and register/memory fields, populating both
// source_ and destination_ fields with the single register/memory result.
MemRegSingleOperand,
// Parse for mode and register/memory fields, populating both
// the destination_ field with the result and setting source_ to Immediate.
MemRegMOV,
// Parse for mode and register/memory fields, populating the
// source_ field with the result. Fills destination_ with a segment
// register based on the reg field.
Seg_MemReg,
MemReg_Seg,
//
// 'Group 1'
//
// Parse for mode and register/memory fields, populating the
// destination_ field with the result. Use the 'register' field
// to pick an operation from the ADD/OR/ADC/SBB/AND/SUB/XOR/CMP group and
// waits for an operand equal to the operation size.
MemRegADD_to_CMP,
// Acts exactly as MemRegADD_to_CMP but the operand is fixed in size
// at a single byte, which is sign extended to the operation size.
MemRegADD_to_CMP_SignExtend,
//
// 'Group 2'
//
// Parse for mode and register/memory fields, populating the
// destination_ field with the result. Use the 'register' field
// to pick an operation from the ROL/ROR/RCL/RCR/SAL/SHR/SAR group.
MemRegROL_to_SAR,
//
// 'Group 3'
//
// Parse for mode and register/memory fields, populating both
// source_ and destination_ fields with the result. Use the 'register'
// field to pick an operation from the TEST/NOT/NEG/MUL/IMUL/DIV/IDIV group.
MemRegTEST_to_IDIV,
//
// 'Group 4'
//
// Parse for mode and register/memory fields, populating the
// source_ and destination_ fields with the result. Uses the
// 'register' field to pick INC or DEC.
MemRegINC_DEC,
//
// 'Group 5'
//
// Parse for mode and register/memory fields, populating the
// source_ and destination_ fields with the result. Uses the
// 'register' field to pick from INC/DEC/CALL/JMP/PUSH, altering
// the source to ::Immediate and setting an operand size if necessary.
MemRegINC_to_PUSH,
//
// 'Group 6'
//
// Parse for mode and register/memory field, populating both source_
// and destination_ fields with the result. Uses the 'register' field
// to pick from SLDT/STR/LLDT/LTR/VERR/VERW.
MemRegSLDT_to_VERW,
//
// 'Group 7'
//
// Parse for mode and register/memory field, populating both source_
// and destination_ fields with the result. Uses the 'register' field
// to pick from SGDT/LGDT/SMSW/LMSW.
MemRegSGDT_to_LMSW,
//
// 'Group 8'
//
// Parse for mode and register/memory field, populating destination,
// and prepare to read a single byte as source.
MemRegBT_to_BTC,
} modregrm_format_ = ModRegRMFormat::MemReg_Reg;
// Ephemeral decoding state.
Operation operation_ = Operation::Invalid;
int consumed_ = 0, operand_bytes_ = 0;
// Source and destination locations.
Source source_ = Source::None;
Source destination_ = Source::None;
// Immediate fields.
int32_t displacement_ = 0;
uint32_t operand_ = 0;
uint64_t inward_data_ = 0;
int next_inward_data_shift_ = 0;
// Indirection style.
ScaleIndexBase sib_;
// Facts about the instruction.
DataSize displacement_size_ = DataSize::None; // i.e. size of in-stream displacement, if any.
DataSize operand_size_ = DataSize::None; // i.e. size of in-stream operand, if any.
DataSize operation_size_ = DataSize::None; // i.e. size of data manipulated by the operation.
bool sign_extend_ = false; // If set then sign extend the operand up to the operation size;
// otherwise it'll be zero-padded.
// Prefix capture fields.
Repetition repetition_ = Repetition::None;
bool lock_ = false;
Source segment_override_ = Source::None;
// 32-bit/16-bit selection.
AddressSize default_address_size_ = AddressSize::b16;
DataSize default_data_size_ = DataSize::Word;
AddressSize address_size_ = AddressSize::b16;
DataSize data_size_ = DataSize::Word;
/// Resets size capture and all fields with default values.
void reset_parsing() {
consumed_ = operand_bytes_ = 0;
displacement_size_ = operand_size_ = operation_size_ = DataSize::None;
displacement_ = operand_ = 0;
lock_ = false;
address_size_ = default_address_size_;
data_size_ = default_data_size_;
segment_override_ = Source::None;
repetition_ = Repetition::None;
phase_ = Phase::Instruction;
source_ = destination_ = Source::None;
sib_ = ScaleIndexBase();
next_inward_data_shift_ = 0;
inward_data_ = 0;
sign_extend_ = false;
}
};
}
}
#endif /* InstructionSets_x86_Decoder_hpp */