6502/CLK
1
0
Fork 0
mirror of https://github.com/TomHarte/CLK.git synced 2024-11-29 12:50:28 +00:00
Code Issues Projects Releases Wiki Activity
8af173c4bc
CLK/Processors/68000/Implementation/68000Implementation.hpp
Thomas Harte 8578dfbf22 Eliminate various other errant spaces.
2023-05-16 16:40:09 -04:00

3107 lines
96 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//
// 68000Implementation.hpp
// Clock Signal
//
// Created by Thomas Harte on 16/05/2022.
// Copyright © 2022 Thomas Harte. All rights reserved.
//
#ifndef MC68000Implementation_h
#define MC68000Implementation_h
#include <cassert>
#include <cstdio>
#include "../../../InstructionSets/M68k/ExceptionVectors.hpp"
namespace CPU::MC68000 {
#define AddressingDispatch(x) \
x, x##__end = x + InstructionSet::M68k::AddressingModeCount
/// States for the state machine which are named by
/// me for their purpose rather than automatically by file position.
/// These are negative to avoid ambiguity with the other group.
enum ExecutionState: int {
Reset,
Decode,
WaitForDTACK,
WaitForInterrupt,
StoreOperand,
StoreOperand_bw,
StoreOperand_l,
StandardException,
BusOrAddressErrorException,
DoInterrupt,
// Specific addressing mode fetches.
//
// Additional context here is that I'm very much on the fence but
// for now am telling myself:
//
// (1) the overwhelming majority of instructions that need an
// effective address calculation use it for an operand read
// immediately afterwards, so keeping those things bound
// avoids a large number of conditional branches; and
// (2) making a decision between byte/word and long-word once at
// the outset also saves a conditional for any two-operand
// instructions (which is also the majority); but
// (3) some instructions do just need the address calculation —
// LEA and PEA are obvious examples, but are not the
// exhaustive list — so a third route just to do the
// calculation is necessary.
//
// My internal dialogue then argues that each of these is actually
// a small amount of code, so the need manually to duplicate (per
// the control-flow constraints of using a switch as a coroutine)
// isn't too ugly. Possibly even less ugly than pulling things out
// with a macro, especially for debugging.
//
// Further consideration may be necessary. Especially once this is
// up on its feet and profiling becomes an option.
/// Perform the proper sequence to fetch a byte or word operand.
/// i.e.
///
/// Dn/An/Q - (An) nr
/// (An)+ nr -(An) n nr
/// (d16, An) np nr (d8, An, Xn) n np nr
/// (d16, PC) np nr (d8, PC, Xn) n np nr
/// (xxx).w np nr (xxx).l np np nr
/// # np
AddressingDispatch(FetchOperand_bw),
/// Perform the proper sequence to fetch a long-word operand.
/// i.e.
///
/// Dn/An/Q - (An) nR nr
/// (An)+ nR nr -(An) n nR nr
/// (d16, An) np nR nr (d8, An, Xn) n np nR nr
/// (d16, PC) np nR nr (d8, PC, Xn) n np nR nr
/// (xxx).w np nR nr (xxx).l np np nR nr
/// # np np
AddressingDispatch(FetchOperand_l),
/// Perform the sequence to calculate an effective address, but don't fetch from it.
/// There's a lack of uniformity in the bus programs used by the 68000 for relevant
/// instructions; this entry point uses:
///
/// Dn/An - (An) -
/// (An)+ - -(An) -
/// (d16, An) np (d8, An, Xn) np n
/// (d16, PC) np (d8, PC, Xn) np n
/// (xxx).w np (xxx).l np np
AddressingDispatch(CalcEffectiveAddress),
/// Similar to CalcEffectiveAddress, but varies slightly in the patterns:
///
/// -(An) n
/// (d8, An, Xn) n np n
/// (d8, PC, Xn) n np n
AddressingDispatch(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec),
// Various forms of perform; each of these will
// perform the current instruction, then do the
// indicated bus cycle.
Perform_np,
Perform_np_n,
Perform_np_nn,
TwoOp_Predec_bw,
TwoOp_Predec_l,
CHK,
CHK_no_trap,
CHK_was_over,
CHK_was_under,
Scc_Dn,
Scc_Dn_did_not_set,
Scc_Dn_did_set,
DBcc,
DBcc_branch_taken,
DBcc_condition_true,
DBcc_counter_overflow,
Bccb,
Bccw,
Bcc_branch_taken,
Bccb_branch_not_taken,
Bccw_branch_not_taken,
BSRb,
BSRw,
JSRJMPAddressRegisterIndirect,
JSRJMPAddressRegisterIndirectWithDisplacement,
JSRJMPAddressRegisterIndirectWithIndex8bitDisplacement,
JSRJMPProgramCounterIndirectWithDisplacement,
JSRJMPProgramCounterIndirectWithIndex8bitDisplacement,
JSRJMPAbsoluteShort,
JSRJMPAbsoluteLong,
JSR, JMP,
BCHG_BSET_Dn,
BCLR_Dn,
MOVEPtoM_w,
MOVEPtoM_l,
MOVEPtoR_w,
MOVEPtoR_l,
LogicalToSR,
MOVEMtoR, MOVEMtoR_l_read, MOVEMtoR_w_read, MOVEMtoR_finish,
MOVEMtoM,
MOVEMtoM_l_write, MOVEMtoM_w_write,
MOVEMtoM_l_write_predec, MOVEMtoM_w_write_predec,
MOVEMtoM_finish,
DIVU_DIVS,
Perform_idle_dyamic_Dn,
LEA,
TAS,
MOVEtoCCRSR,
RTR,
RTE,
RTS,
LINKw,
UNLINK,
RESET,
NOP,
STOP,
TRAP,
TRAPV,
AddressRegisterIndirectWithIndex8bitDisplacement_n_np,
ProgramCounterIndirectWithIndex8bitDisplacement_n_np,
AddressingDispatch(PEA),
PEA_np_nS_ns, // Used to complete (An), (d16, [An/PC]) and (d8, [An/PC], Xn).
PEA_np_nS_ns_np, // Used to complete (xxx).w and (xxx).l
MOVE_b, MOVE_w,
AddressingDispatch(MOVE_bw), MOVE_bw_AbsoluteLong_prefetch_first,
AddressingDispatch(MOVE_l), MOVE_l_AbsoluteLong_prefetch_first,
Max
};
#undef AddressingDispatch
/// @returns The proper select lines for @c instruction's operand size, assuming it is either byte or word.
template <typename InstructionT> Microcycle::OperationT data_select(const InstructionT &instruction) {
return Microcycle::OperationT(1 << int(instruction.operand_size()));
}
// MARK: - The state machine.
#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-label"
#endif
template <class BusHandler, bool dtack_is_implicit, bool permit_overrun, bool signal_will_perform>
void Processor<BusHandler, dtack_is_implicit, permit_overrun, signal_will_perform>::run_for(HalfCycles duration) {
// Accumulate the newly paid-in cycles. If this instance remains in deficit, exit.
e_clock_phase_ += duration;
time_remaining_ += duration;
if(time_remaining_ < HalfCycles(0)) return;
// Check whether all remaining time has been expended; if so then exit, having set this line up as
// the next resumption point.
#define ConsiderExit() if(time_remaining_ < HalfCycles(0)) { state_ = ExecutionState::Max + ((__COUNTER__+1) >> 1); return; } [[fallthrough]]; case ExecutionState::Max + (__COUNTER__ >> 1):
// Subtracts `n` half-cycles from `time_remaining_`; if permit_overrun is false, also ConsiderExit()
#define Spend(n) time_remaining_ -= (n); if constexpr (!permit_overrun) ConsiderExit()
// Performs ConsiderExit() only if permit_overrun is true.
#define CheckOverrun() if constexpr (permit_overrun) ConsiderExit()
// Moves directly to state x, which must be a compile-time constant.
#define MoveToStateSpecific(x) goto x;
// Moves to state x by dynamic dispatch; x can be a regular variable.
#define MoveToStateDynamic(x) { state_ = x; continue; }
// Sets the start position for state x.
#define BeginState(x) case ExecutionState::x: x
// Sets the start position for the addressing mode y within state x,
// where x was declared as an AddressingDispatch.
#define BeginStateMode(x, y) case ExecutionState::x + int(InstructionSet::M68k::AddressingMode::y) + 1
// Moves dynamically to addressing mode y within state x, where x was declared
// as an AddressingDispatch.
#define MoveToAddressingMode(x, y) MoveToStateDynamic(ExecutionState::x + int(y) + 1)
//
// So basic structure is, in general:
//
// BeginState(Action):
// do_something();
// Spend(20);
// do_something_else();
// Spend(10);
// do_a_third_thing();
// Spend(30);
// MoveToState(next_action);
//
// Additional notes:
//
// Action and all equivalents should be negative values, since the
// switch-for-computed-goto-for-a-coroutine structure uses __COUNTER__* for
// its invented entry- and exit-points, meaning that negative numbers are
// the easiest group that is safely definitely never going to collide.
//
// (* an extension supported by at least GCC, Clang and MSVC)
// Spare containers:
HalfCycles delay; // To receive any additional time added on by calls to perform_bus_operation.
// Helper macros for common bus transactions:
// Raises the exception with integer vector x. x is the vector identifier,
// not its address.
#define RaiseException(x) \
exception_vector_ = x; \
MoveToStateSpecific(StandardException);
// Raises a bus/address error with integer vector x for access v.
// x is the vector identifier, not its address.
#define RaiseBusOrAddressError(x, v) \
exception_vector_ = InstructionSet::M68k::x; \
bus_error_ = v; \
MoveToStateSpecific(BusOrAddressErrorException);
// Performs the bus operation and then applies a `Spend` of its length
// plus any additional length returned by the bus handler.
#define PerformBusOperation(x) \
delay = bus_handler_.perform_bus_operation(x, is_supervisor_); \
Spend(x.length + delay)
// Performs no bus activity for the specified number of microcycles.
#define IdleBus(n) \
idle.length = HalfCycles((n) << 2); \
PerformBusOperation(idle)
// Spin until DTACK, VPA or BERR is asserted (unless DTACK is implicit),
// holding the bus cycle provided.
#define WaitForDTACK(x) \
if constexpr (!dtack_is_implicit && !dtack_ && !vpa_ && !berr_) { \
awaiting_dtack = x; \
awaiting_dtack.length = HalfCycles(2); \
post_dtack_state_ = ExecutionState::Max + ((__COUNTER__ + 1) >> 1); \
state_ = ExecutionState::WaitForDTACK; \
break; \
} \
[[fallthrough]]; case ExecutionState::Max + (__COUNTER__ >> 1):
// Performs the bus operation provided, which will be one with a
// SelectWord or SelectByte operation, stretching it to match the E
// bus if VPA is currently asserted or seguing elsewhere if a bus
// error is signalled or an adress error observed.
//
// E clock behaviour implemented, which I think is correct:
//
// (1) wait until end of current 10-cycle window;
// (2) run for the next 10-cycle window.
#define CompleteAccess(x) \
if(berr_) { \
RaiseBusOrAddressError(AccessFault, x); \
} \
if(vpa_) { \
x.length = HalfCycles(20) + (HalfCycles(20) + (e_clock_phase_ - time_remaining_) % HalfCycles(20)) % HalfCycles(20); \
} else { \
x.length = HalfCycles(4); \
} \
PerformBusOperation(x)
// Performs the memory access implied by the announce, perform pair,
// honouring DTACK, BERR and VPA as necessary.
#define AccessPair(val, announce, perform) \
perform.value = &val; \
if constexpr (!dtack_is_implicit) { \
announce.length = HalfCycles(4); \
} \
if(*perform.address & (perform.operation >> 1) & 1) { \
RaiseBusOrAddressError(AddressError, perform); \
} \
PerformBusOperation(announce); \
WaitForDTACK(announce); \
CompleteAccess(perform);
// Sets up the next data access size and read flags.
#define SetupDataAccess(read_flag, select_flag) \
access_announce.operation = Microcycle::NewAddress | Microcycle::IsData | (read_flag); \
access.operation = Microcycle::SameAddress | Microcycle::IsData | (read_flag) | (select_flag);
// Sets the address source for the next data access.
#define SetDataAddress(addr) \
access.address = access_announce.address = &addr;
// Performs the access established by SetupDataAccess into val.
#define Access(val) \
AccessPair(val, access_announce, access)
// Reads the program (i.e. non-data) word from addr into val.
#define ReadProgramWord(val) \
AccessPair(val, read_program_announce, read_program); \
program_counter_.l += 2;
// Reads one futher word from the program counter and inserts it into
// the prefetch queue.
#define Prefetch() \
prefetch_.high = prefetch_.low; \
ReadProgramWord(prefetch_.low) \
captured_interrupt_level_ = bus_interrupt_level_;
// Copies the current program counter, adjusted to allow for the prefetch queue,
// into the instruction_address_ latch, which is the source of the value written
// during exceptions.
#define ReloadInstructionAddress() \
instruction_address_.l = program_counter_.l - 4
using Mode = InstructionSet::M68k::AddressingMode;
// Otherwise continue for all time, until back in debt.
// Formatting is slightly obtuse here to make this look more like a coroutine.
while(true) { switch(state_) {
// Spin in place, one cycle at a time, until one of DTACK,
// BERR or VPA is asserted.
BeginState(WaitForDTACK):
PerformBusOperation(awaiting_dtack);
if(dtack_ || berr_ || vpa_) {
MoveToStateDynamic(post_dtack_state_);
}
MoveToStateSpecific(WaitForDTACK);
BeginState(STOP):
// Apply the suffix status.
status_.set_status(prefetch_.w);
did_update_status();
// Ensure that after this STOP exits, the eventual RTE returns to
// after the STOP rather than to it. Unlike most instructions, STOP
// has not prefetched the next instruction, so the program counter
// is at the actual return point, not beyond it.
instruction_address_.l = program_counter_.l;
[[fallthrough]];
BeginState(WaitForInterrupt):
// Spin in place until an interrupt arrives.
captured_interrupt_level_ = bus_interrupt_level_;
if(status_.would_accept_interrupt(captured_interrupt_level_)) {
MoveToStateSpecific(DoInterrupt);
}
IdleBus(1);
CheckOverrun();
MoveToStateSpecific(WaitForInterrupt);
// Perform the RESET exception, which seeds the stack pointer and program
// counter, populates the prefetch queue, and then moves to instruction dispatch.
BeginState(Reset):
IdleBus(7); // (n-)*5 nn
// Establish general reset state.
status_.begin_exception(7);
should_trace_ = 0;
did_update_status();
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(temporary_address_.l);
temporary_address_.l = 0;
Access(registers_[15].high); // nF
temporary_address_.l += 2;
Access(registers_[15].low); // nf
temporary_address_.l += 2;
Access(program_counter_.high); // nV
temporary_address_.l += 2;
Access(program_counter_.low); // nv
Prefetch(); // np
IdleBus(1); // n
Prefetch(); // np
MoveToStateSpecific(Decode);
// Perform a 'standard' exception, i.e. a Group 1 or 2.
BeginState(StandardException):
// Switch to supervisor mode, disable interrupts.
captured_status_.w = status_.begin_exception();
should_trace_ = 0;
did_update_status();
SetupDataAccess(0, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
// Push status and current program counter.
// Write order is wacky here, but I think it's correct.
registers_[15].l -= 2;
Access(instruction_address_.low); // ns
registers_[15].l -= 4;
Access(captured_status_); // ns
registers_[15].l += 2;
Access(instruction_address_.high); // nS
registers_[15].l -= 2;
// Grab new program counter.
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(temporary_address_.l);
temporary_address_.l = uint32_t(exception_vector_ << 2);
Access(program_counter_.high); // nV
temporary_address_.l += 2;
Access(program_counter_.low); // nv
// Populate the prefetch queue.
Prefetch(); // np
IdleBus(1); // n
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(BusOrAddressErrorException):
// "The microcode pushes the stack frame in a non consecutive order"
// per Ijor's document, but little further information is given.
//
// So the below is a cross-your-fingers guess based on the constraints
// that the information writen, from lowest address to highest is:
//
// R/W, I/N, function code word; [at -14]
// access address; [-12]
// instruction register; [-8]
// status register; [-6]
// program counter. [-4]
//
// With the instruction register definitely being written before the
// function code word.
//
// And the documented bus pattern is:
//
// nn ns ns nS ns ns ns nS nV nv np n np
//
// So, based on the hoopy ordering of a standard exception, maybe:
//
// 1) program counter low;
// 2) captured state;
// 3) program counter high;
// 4) instruction register;
// 5) access address low;
// 6) function code;
// 7) access address high?
//
// Noteworthy in this guess: access code and function code are written in
// the same interleaved order as program counter and captured status register,
// which is the order that I know to be correct for a standard exception.
IdleBus(2);
// Switch to supervisor mode, disable interrupts.
captured_status_.w = status_.begin_exception();
should_trace_ = 0;
did_update_status();
SetupDataAccess(0, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
// Guess: the written program counter is adjusted to discount the prefetch queue.
// COMPLETE GUESS.
temporary_address_.l = program_counter_.l - 4;
registers_[15].l -= 2;
Access(temporary_address_.low); // ns [pc.l]
registers_[15].l -= 4;
Access(captured_status_); // ns [sr]
registers_[15].l += 2;
Access(temporary_address_.high); // nS [pc.h]
registers_[15].l -= 4;
temporary_value_.w = opcode_;
Access(temporary_value_.low); // ns [instruction register]
// Construct the function code; which is:
//
// b4: 1 = was a read; 0 = was a write;
// b3: 0 = was reading an instruction; 1 = wasn't;
// b2–b0: the regular 68000 function code;
// [all other bits]: left over from the instruction register write, above.
//
// I'm unable to come up with a reason why the function code isn't duplicative
// of b3, but given the repetition of supervisor state which is also in the
// captured status register I guess maybe it is just duplicative.
temporary_value_.w =
(temporary_value_.w & ~31) |
((bus_error_.operation & Microcycle::Read) ? 0x10 : 0x00) |
((bus_error_.operation & Microcycle::IsProgram) ? 0x08 : 0x00) |
((bus_error_.operation & Microcycle::IsProgram) ? 0x02 : 0x01) |
((captured_status_.w & InstructionSet::M68k::ConditionCode::Supervisor) ? 0x04 : 0x00);
temporary_address_.l = *bus_error_.address;
registers_[15].l -= 2;
Access(temporary_address_.low); // ns [error address.l]
registers_[15].l -= 4;
Access(temporary_value_.low); // ns [function code]
registers_[15].l += 2;
Access(temporary_address_.high); // nS [error address.h]
registers_[15].l -= 2;
// Grab new program counter.
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(temporary_address_.l);
temporary_address_.l = uint32_t(exception_vector_ << 2);
Access(program_counter_.high); // nV
temporary_address_.l += 2;
Access(program_counter_.low); // nv
// Populate the prefetch queue.
Prefetch(); // np
IdleBus(1); // n
Prefetch(); // np
MoveToStateSpecific(Decode);
// Acknowledge an interrupt, thereby obtaining an exception vector,
// and do the exception.
BeginState(DoInterrupt):
IdleBus(3); // n nn
// Capture status and switch to supervisor mode.
captured_status_.w = status_.begin_exception(captured_interrupt_level_);
should_trace_ = 0;
did_update_status();
// Prepare for stack activity.
SetupDataAccess(0, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
// Push low part of program counter.
registers_[15].l -= 2;
Access(instruction_address_.low); // ns
// Do the interrupt cycle, to obtain a vector.
temporary_address_.l = 0xffff'fff1 | uint32_t(captured_interrupt_level_ << 1);
interrupt_cycles[0].address = interrupt_cycles[1].address = &temporary_address_.l;
interrupt_cycles[0].value = interrupt_cycles[1].value = &temporary_value_.low;
PerformBusOperation(interrupt_cycles[0]);
CompleteAccess(interrupt_cycles[1]); // ni
// If VPA is set, autovector.
if(vpa_) {
temporary_value_.b = uint8_t(InstructionSet::M68k::Exception::InterruptAutovectorBase - 1 + captured_interrupt_level_);
}
if(berr_) {
temporary_value_.b = uint8_t(InstructionSet::M68k::Exception::SpuriousInterrupt);
}
// TODO: check documentation for other potential interrupt outcomes;
// and presumably spin here if DTACK isn't implicit.
IdleBus(3); // n- n
// Do the rest of the stack work.
SetDataAddress(registers_[15].l);
registers_[15].l -= 4;
Access(captured_status_); // ns
registers_[15].l += 2;
Access(instruction_address_.high); // nS
registers_[15].l -= 2;
// Grab new program counter.
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(temporary_address_.l);
temporary_address_.l = uint32_t(temporary_value_.b << 2);
Access(program_counter_.high); // nV
temporary_address_.l += 2;
Access(program_counter_.low); // nv
// Populate the prefetch queue.
Prefetch(); // np
IdleBus(1); // n
Prefetch(); // np
MoveToStateSpecific(Decode);
// Inspect the prefetch queue in order to decode the next instruction,
// and segue into the fetching of operands.
BeginState(Decode):
CheckOverrun();
// Capture the address of the next instruction.
ReloadInstructionAddress();
// Head off into an interrupt if one is found.
if(status_.would_accept_interrupt(captured_interrupt_level_)) {
MoveToStateSpecific(DoInterrupt);
}
// Potentially perform a trace.
if(should_trace_) {
RaiseException(InstructionSet::M68k::Exception::Trace);
}
// Capture the current trace flag.
should_trace_ = status_.trace_flag;
// Read and decode an opcode.
opcode_ = prefetch_.high.w;
instruction_ = decoder_.decode(opcode_);
// Signal the bus handler if requested.
if constexpr (signal_will_perform) {
// Set the state to Decode, so that if the callee pulls any shenanigans in order
// to force an exit here, the interpreter can resume without skipping a beat.
//
// signal_will_perform is overtly a debugging/testing feature.
state_ = Decode;
bus_handler_.will_perform(instruction_address_.l, opcode_);
}
// Ensure the first parameter is next fetched.
next_operand_ = 0;
/// If operation x requires supervisor privileges, checks whether the user is currently in supervisor mode;
/// if not then raises a privilege violation exception.
#define CheckSupervisor(x) \
if constexpr (InstructionSet::M68k::requires_supervisor<InstructionSet::M68k::Model::M68000>(InstructionSet::M68k::Operation::x)) { \
if(!status_.is_supervisor) { \
RaiseException(InstructionSet::M68k::Exception::PrivilegeViolation); \
} \
}
#define CASE(x) \
case InstructionSet::M68k::Operation::x: \
CheckSupervisor(x); \
operand_flags_ = InstructionSet::M68k::operand_flags<InstructionSet::M68k::Model::M68000, InstructionSet::M68k::Operation::x>();
#define StdCASE(x, y) \
CASE(x) \
y; \
\
if constexpr (InstructionSet::M68k::operand_size<InstructionSet::M68k::Operation::x>() == InstructionSet::M68k::DataSize::LongWord) { \
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord); \
MoveToStateSpecific(FetchOperand_l); \
} else { \
if constexpr (InstructionSet::M68k::operand_size<InstructionSet::M68k::Operation::x>() == InstructionSet::M68k::DataSize::Byte) { \
SetupDataAccess(Microcycle::Read, Microcycle::SelectByte); \
} else { \
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord); \
} \
MoveToStateSpecific(FetchOperand_bw); \
}
#define Duplicate(x, y) \
case InstructionSet::M68k::Operation::x: \
static_assert( \
InstructionSet::M68k::operand_flags<InstructionSet::M68k::Model::M68000, InstructionSet::M68k::Operation::x>() == \
InstructionSet::M68k::operand_flags<InstructionSet::M68k::Model::M68000, InstructionSet::M68k::Operation::y>() && \
InstructionSet::M68k::operand_size<InstructionSet::M68k::Operation::x>() == \
InstructionSet::M68k::operand_size<InstructionSet::M68k::Operation::y>() && \
InstructionSet::M68k::requires_supervisor<InstructionSet::M68k::Model::M68000>(InstructionSet::M68k::Operation::x) == \
InstructionSet::M68k::requires_supervisor<InstructionSet::M68k::Model::M68000>(InstructionSet::M68k::Operation::y) \
); \
[[fallthrough]];
#define SpecialCASE(x) case InstructionSet::M68k::Operation::x: CheckSupervisor(x); MoveToStateSpecific(x)
switch(instruction_.operation) {
case InstructionSet::M68k::Operation::Undefined:
switch(opcode_ & 0xf000) {
default:
exception_vector_ = InstructionSet::M68k::Exception::IllegalInstruction;
break;
case 0xa000:
exception_vector_ = InstructionSet::M68k::Exception::Line1010;
break;
case 0xf000:
exception_vector_ = InstructionSet::M68k::Exception::Line1111;
break;
}
MoveToStateSpecific(StandardException);
StdCASE(NBCD, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_n;
} else {
perform_state_ = Perform_np;
}
})
Duplicate(CLRb, NEGXb) Duplicate(NEGb, NEGXb) Duplicate(NOTb, NEGXb)
StdCASE(NEGXb, perform_state_ = Perform_np);
Duplicate(CLRw, NEGXw) Duplicate(NEGw, NEGXw) Duplicate(NOTw, NEGXw)
StdCASE(NEGXw, perform_state_ = Perform_np);
Duplicate(CLRl, NEGXl) Duplicate(NEGl, NEGXl) Duplicate(NOTl, NEGXl)
StdCASE(NEGXl,
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_n;
} else {
perform_state_ = Perform_np;
}
);
StdCASE(SWAP, perform_state_ = Perform_np);
StdCASE(EXG, perform_state_ = Perform_np_n);
StdCASE(EXTbtow, perform_state_ = Perform_np);
StdCASE(EXTwtol, perform_state_ = Perform_np);
StdCASE(MOVEb, perform_state_ = MOVE_b);
Duplicate(MOVEAw, MOVEw)
StdCASE(MOVEw, perform_state_ = MOVE_w);
Duplicate(MOVEAl, MOVEl)
StdCASE(MOVEl, perform_state_ = MOVE_l);
StdCASE(CMPb, perform_state_ = Perform_np);
StdCASE(CMPw, perform_state_ = Perform_np);
StdCASE(CMPl,
perform_state_ = instruction_.mode(1) == Mode::DataRegisterDirect ? Perform_np_n : Perform_np
);
StdCASE(CMPAw, perform_state_ = Perform_np_n);
StdCASE(CMPAl, perform_state_ = Perform_np_n);
Duplicate(ANDb, ORb) StdCASE(ORb, perform_state_ = Perform_np);
Duplicate(ANDw, ORw) StdCASE(ORw, perform_state_ = Perform_np);
Duplicate(ANDl, ORl) StdCASE(ORl, {
if(instruction_.mode(1) == Mode::DataRegisterDirect) {
switch(instruction_.mode(0)) {
default:
perform_state_ = Perform_np_n;
break;
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
perform_state_ = Perform_np_nn;
break;
}
} else {
perform_state_ = Perform_np;
}
});
StdCASE(EORb, perform_state_ = Perform_np);
StdCASE(EORw, perform_state_ = Perform_np);
StdCASE(EORl, {
if(instruction_.mode(1) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_nn;
} else {
perform_state_ = Perform_np;
}
})
Duplicate(SBCD, ABCD)
CASE(ABCD)
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_n;
SetupDataAccess(Microcycle::Read, Microcycle::SelectByte);
MoveToStateSpecific(FetchOperand_bw);
} else {
select_flag_ = Microcycle::SelectByte;
MoveToStateSpecific(TwoOp_Predec_bw);
}
StdCASE(CHKw, perform_state_ = CHK);
Duplicate(SUBb, ADDb) StdCASE(ADDb, perform_state_ = Perform_np)
Duplicate(SUBw, ADDw) StdCASE(ADDw, perform_state_ = Perform_np)
Duplicate(SUBl, ADDl) StdCASE(ADDl, {
if(instruction_.mode(0) == Mode::Quick) {
perform_state_ = (
instruction_.mode(1) == Mode::AddressRegisterDirect ||
instruction_.mode(1) == Mode::DataRegisterDirect
) ? Perform_np_nn : Perform_np;
} else {
if(instruction_.mode(1) != Mode::DataRegisterDirect) {
perform_state_ = Perform_np;
} else {
switch(instruction_.mode(0)) {
default:
perform_state_ = Perform_np_n;
break;
case Mode::DataRegisterDirect:
case Mode::AddressRegisterDirect:
case Mode::ImmediateData:
perform_state_ = Perform_np_nn;
break;
}
}
}
})
Duplicate(SUBAw, ADDAw) StdCASE(ADDAw, perform_state_ = Perform_np_nn)
Duplicate(SUBAl, ADDAl) StdCASE(ADDAl, {
switch(instruction_.mode(0)) {
default:
perform_state_ = Perform_np_n;
break;
case Mode::DataRegisterDirect:
case Mode::AddressRegisterDirect:
case Mode::ImmediateData:
perform_state_ = Perform_np_nn;
break;
}
})
Duplicate(SUBXb, ADDXb) StdCASE(ADDXb, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np;
} else {
select_flag_ = Microcycle::SelectByte;
MoveToStateSpecific(TwoOp_Predec_bw);
}
})
Duplicate(SUBXw, ADDXw) StdCASE(ADDXw, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np;
} else {
select_flag_ = Microcycle::SelectWord;
MoveToStateSpecific(TwoOp_Predec_bw);
}
})
Duplicate(SUBXl, ADDXl) StdCASE(ADDXl, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_nn;
} else {
MoveToStateSpecific(TwoOp_Predec_l);
}
})
StdCASE(Scc, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Scc_Dn;
} else {
perform_state_ = Perform_np;
}
});
SpecialCASE(DBcc);
SpecialCASE(Bccb);
SpecialCASE(Bccw);
SpecialCASE(BSRb);
SpecialCASE(BSRw);
Duplicate(JMP, JSR)
StdCASE(JSR, {
post_ea_state_ =
(instruction_.operation == InstructionSet::M68k::Operation::JSR) ?
JSR : JMP;
switch(instruction_.mode(0)) {
case Mode::AddressRegisterIndirect:
MoveToStateSpecific(JSRJMPAddressRegisterIndirect);
case Mode::AddressRegisterIndirectWithDisplacement:
MoveToStateSpecific(JSRJMPAddressRegisterIndirectWithDisplacement);
case Mode::AddressRegisterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(JSRJMPAddressRegisterIndirectWithIndex8bitDisplacement);
case Mode::ProgramCounterIndirectWithDisplacement:
MoveToStateSpecific(JSRJMPProgramCounterIndirectWithDisplacement);
case Mode::ProgramCounterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(JSRJMPProgramCounterIndirectWithIndex8bitDisplacement);
case Mode::AbsoluteShort:
MoveToStateSpecific(JSRJMPAbsoluteShort);
case Mode::AbsoluteLong:
MoveToStateSpecific(JSRJMPAbsoluteLong);
default: assert(false);
}
});
StdCASE(BTST, {
switch(instruction_.mode(1)) {
default:
perform_state_ = Perform_np;
break;
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
perform_state_ = Perform_np_n;
break;
}
});
Duplicate(BCHG, BSET)
StdCASE(BSET, {
switch(instruction_.mode(1)) {
default:
perform_state_ = Perform_np;
break;
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
perform_state_ = BCHG_BSET_Dn;
break;
}
});
StdCASE(BCLR, {
switch(instruction_.mode(1)) {
default:
perform_state_ = Perform_np;
break;
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
perform_state_ = BCLR_Dn;
break;
}
});
StdCASE(MOVEPl, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
MoveToStateSpecific(MOVEPtoM_l);
} else {
MoveToStateSpecific(MOVEPtoR_l);
}
});
StdCASE(MOVEPw, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
MoveToStateSpecific(MOVEPtoM_w);
} else {
MoveToStateSpecific(MOVEPtoR_w);
}
});
Duplicate(ORItoCCR, EORItoCCR); Duplicate(ANDItoCCR, EORItoCCR);
StdCASE(EORItoCCR, perform_state_ = LogicalToSR);
Duplicate(ORItoSR, EORItoSR); Duplicate(ANDItoSR, EORItoSR);
StdCASE(EORItoSR, perform_state_ = LogicalToSR);
StdCASE(MOVEMtoRl, perform_state_ = MOVEMtoR);
StdCASE(MOVEMtoRw, perform_state_ = MOVEMtoR);
StdCASE(MOVEMtoMl, perform_state_ = MOVEMtoM);
StdCASE(MOVEMtoMw, perform_state_ = MOVEMtoM);
StdCASE(TSTb, perform_state_ = Perform_np);
StdCASE(TSTw, perform_state_ = Perform_np);
StdCASE(TSTl, perform_state_ = Perform_np);
StdCASE(DIVUw, perform_state_ = DIVU_DIVS);
StdCASE(DIVSw, perform_state_ = DIVU_DIVS);
StdCASE(MULUw, perform_state_ = Perform_idle_dyamic_Dn);
StdCASE(MULSw, perform_state_ = Perform_idle_dyamic_Dn);
StdCASE(LEA, {
post_ea_state_ = LEA;
MoveToStateSpecific(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec);
});
SpecialCASE(PEA);
StdCASE(TAS, {
// TAS uses a special atomic bus cycle for memory accesses,
// but is also available as DataRegisterDirect, with no
// memory access whatsoever. It's also atypical in its layout
// for (d8, An, Xn). So segue here appropriately.
switch(instruction_.mode(0)) {
case Mode::DataRegisterDirect:
perform_state_ = Perform_np;
break;
case Mode::AddressRegisterIndirectWithIndex8bitDisplacement:
post_ea_state_ = TAS;
MoveToStateSpecific(AddressRegisterIndirectWithIndex8bitDisplacement_n_np);
default:
post_ea_state_ = TAS;
MoveToStateSpecific(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec);
}
});
StdCASE(MOVEtoCCR, perform_state_ = MOVEtoCCRSR);
StdCASE(MOVEtoSR, perform_state_ = MOVEtoCCRSR);
StdCASE(MOVEfromSR, {
if(instruction_.mode(0) == Mode::DataRegisterDirect) {
perform_state_ = Perform_np_n;
} else {
perform_state_ = Perform_np;
}
});
SpecialCASE(RTR);
SpecialCASE(RTE);
SpecialCASE(RTS);
#define ShiftGroup(suffix, state) \
Duplicate(ASL##suffix, ASR##suffix); \
Duplicate(LSL##suffix, ASR##suffix); \
Duplicate(LSR##suffix, ASR##suffix); \
Duplicate(ROL##suffix, ASR##suffix); \
Duplicate(ROR##suffix, ASR##suffix); \
Duplicate(ROXL##suffix, ASR##suffix); \
Duplicate(ROXR##suffix, ASR##suffix); \
StdCASE(ASR##suffix, perform_state_ = state );
ShiftGroup(m, Perform_np)
ShiftGroup(b, Perform_idle_dyamic_Dn)
ShiftGroup(w, Perform_idle_dyamic_Dn)
ShiftGroup(l, Perform_idle_dyamic_Dn)
#undef ShiftGroup
SpecialCASE(LINKw);
SpecialCASE(UNLINK);
SpecialCASE(RESET);
SpecialCASE(NOP);
StdCASE(MOVEtoUSP, perform_state_ = Perform_np);
StdCASE(MOVEfromUSP, perform_state_ = Perform_np);
SpecialCASE(STOP);
SpecialCASE(TRAP);
SpecialCASE(TRAPV);
default:
assert(false);
}
#undef Duplicate
#undef StdCASE
#undef CASE
#undef SpecialCASE
#undef CheckSupervisor
// MARK: - Fetch, dispatch.
#define MoveToNextOperand(x) \
++next_operand_; \
if(next_operand_ == 2) { \
MoveToStateDynamic(perform_state_); \
} \
MoveToStateSpecific(x)
// Check the operand flags to determine whether the byte or word
// operand at index next_operand_ needs to be fetched, and if so
// then calculate the EA and do so.
BeginState(FetchOperand_bw):
// Check that this operand is meant to be fetched; if not then either:
//
// (i) this operand isn't used; or
// (ii) its address calculation will end up conflated with performance,
// so there's no generic bus-accurate approach.
assert(next_operand_ >= 0 && next_operand_ < 2);
if(!(operand_flags_ & (1 << next_operand_))) {
MoveToStateDynamic(perform_state_);
}
MoveToAddressingMode(FetchOperand_bw, instruction_.mode(next_operand_));
// As above, but for .l.
BeginState(FetchOperand_l):
assert(next_operand_ >= 0 && next_operand_ < 2);
if(!(operand_flags_ & (1 << next_operand_))) {
MoveToStateDynamic(perform_state_);
}
MoveToAddressingMode(FetchOperand_l, instruction_.mode(next_operand_));
BeginState(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec):
MoveToAddressingMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, instruction_.mode(next_operand_));
BeginState(CalcEffectiveAddress):
MoveToAddressingMode(CalcEffectiveAddress, instruction_.mode(next_operand_));
// MARK: - Fetch, addressing modes.
//
// DataRegisterDirect, AddressRegisterDirect
//
BeginStateMode(FetchOperand_bw, AddressRegisterDirect):
BeginStateMode(FetchOperand_bw, DataRegisterDirect):
operand_[next_operand_] = registers_[instruction_.lreg(next_operand_)];
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(FetchOperand_l, AddressRegisterDirect):
BeginStateMode(FetchOperand_l, DataRegisterDirect):
operand_[next_operand_] = registers_[instruction_.lreg(next_operand_)];
MoveToNextOperand(FetchOperand_l);
BeginStateMode(MOVE_l, AddressRegisterDirect):
BeginStateMode(MOVE_l, DataRegisterDirect):
BeginStateMode(MOVE_bw, AddressRegisterDirect):
registers_[instruction_.lreg(1)] = operand_[1];
Prefetch();
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_bw, DataRegisterDirect): {
const uint32_t write_mask = size_masks[int(instruction_.operand_size())];
const int reg = instruction_.lreg(1);
registers_[reg].l =
(operand_[1].l & write_mask) |
(registers_[reg].l & ~write_mask);
}
Prefetch();
MoveToStateSpecific(Decode);
//
// Quick
//
BeginStateMode(FetchOperand_bw, Quick):
operand_[next_operand_].l = InstructionSet::M68k::quick(opcode_, instruction_.operation);
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(FetchOperand_l, Quick):
operand_[next_operand_].l = InstructionSet::M68k::quick(opcode_, instruction_.operation);
MoveToNextOperand(FetchOperand_l);
//
// AddressRegisterIndirect
//
BeginStateMode(FetchOperand_bw, AddressRegisterIndirect):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AddressRegisterIndirect):
SetDataAddress(registers_[8 + instruction_.reg(1)].l);
SetupDataAccess(0, data_select(instruction_));
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AddressRegisterIndirect):
effective_address_[1] = registers_[8 + instruction_.reg(1)];
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AddressRegisterIndirect):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AddressRegisterIndirect):
BeginStateMode(CalcEffectiveAddress, AddressRegisterIndirect):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, AddressRegisterIndirect):
effective_address_[0].l = registers_[8 + instruction_.reg(next_operand_)].l;
MoveToStateDynamic(PEA_np_nS_ns);
BeginState(JSRJMPAddressRegisterIndirect):
effective_address_[0].l = registers_[8 + instruction_.reg(next_operand_)].l;
temporary_address_.l = instruction_address_.l + 2;
MoveToStateDynamic(post_ea_state_);
//
// AddressRegisterIndirectWithPostincrement
//
BeginStateMode(FetchOperand_bw, AddressRegisterIndirectWithPostincrement):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
registers_[8 + instruction_.reg(next_operand_)].l +=
address_increments[int(instruction_.operand_size())][instruction_.reg(next_operand_)];
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AddressRegisterIndirectWithPostincrement):
SetDataAddress(registers_[8 + instruction_.reg(1)].l);
SetupDataAccess(0, data_select(instruction_));
Access(operand_[next_operand_].low); // nw
registers_[8 + instruction_.reg(next_operand_)].l +=
address_increments[int(instruction_.operand_size())][instruction_.reg(1)];
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AddressRegisterIndirectWithPostincrement):
SetDataAddress(registers_[8 + instruction_.reg(next_operand_)].l);
SetupDataAccess(0, Microcycle::SelectWord);
Access(operand_[next_operand_].high); // nW
registers_[8 + instruction_.reg(next_operand_)].l += 2;
Access(operand_[next_operand_].low); // nW
registers_[8 + instruction_.reg(next_operand_)].l += 2;
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AddressRegisterIndirectWithPostincrement):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
registers_[8 + instruction_.reg(next_operand_)].l += 4;
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AddressRegisterIndirectWithPostincrement):
BeginStateMode(CalcEffectiveAddress, AddressRegisterIndirectWithPostincrement):
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
registers_[8 + instruction_.reg(next_operand_)].l +=
address_increments[int(instruction_.operand_size())][instruction_.reg(next_operand_)];
MoveToStateDynamic(post_ea_state_);
//
// AddressRegisterIndirectWithPredecrement
//
BeginStateMode(FetchOperand_bw, AddressRegisterIndirectWithPredecrement):
registers_[8 + instruction_.reg(next_operand_)].l -=
address_increments[int(instruction_.operand_size())][instruction_.reg(next_operand_)];
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AddressRegisterIndirectWithPredecrement):
registers_[8 + instruction_.reg(1)].l -= address_increments[int(instruction_.operand_size())][instruction_.reg(1)];
effective_address_[1].l = registers_[8 + instruction_.reg(1)].l;
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AddressRegisterIndirectWithPredecrement):
SetDataAddress(registers_[8 + instruction_.reg(1)].l);
SetupDataAccess(0, Microcycle::SelectWord);
Prefetch(); // np
registers_[8 + instruction_.reg(1)].l -= 2;
Access(operand_[next_operand_].low); // nw
registers_[8 + instruction_.reg(1)].l -= 2;
Access(operand_[next_operand_].high); // nW
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AddressRegisterIndirectWithPredecrement):
registers_[8 + instruction_.reg(next_operand_)].l -= 4;
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AddressRegisterIndirectWithPredecrement):
IdleBus(1);
[[fallthrough]];
BeginStateMode(CalcEffectiveAddress, AddressRegisterIndirectWithPredecrement):
registers_[8 + instruction_.reg(next_operand_)].l -= address_increments[int(instruction_.operand_size())][instruction_.reg(next_operand_)];
effective_address_[next_operand_].l = registers_[8 + instruction_.reg(next_operand_)].l;
MoveToStateDynamic(post_ea_state_);
//
// AddressRegisterIndirectWithDisplacement
//
BeginStateMode(FetchOperand_bw, AddressRegisterIndirectWithDisplacement):
effective_address_[next_operand_].l =
registers_[8 + instruction_.reg(next_operand_)].l +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AddressRegisterIndirectWithDisplacement):
effective_address_[1].l =
registers_[8 + instruction_.reg(1)].l +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AddressRegisterIndirectWithDisplacement):
effective_address_[1].l =
registers_[8 + instruction_.reg(1)].l +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AddressRegisterIndirectWithDisplacement):
effective_address_[next_operand_].l =
registers_[8 + instruction_.reg(next_operand_)].l +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AddressRegisterIndirectWithDisplacement):
BeginStateMode(CalcEffectiveAddress, AddressRegisterIndirectWithDisplacement):
effective_address_[next_operand_].l =
registers_[8 + instruction_.reg(next_operand_)].l +
uint32_t(int16_t(prefetch_.w));
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, AddressRegisterIndirectWithDisplacement):
effective_address_[0].l =
registers_[8 + instruction_.reg(next_operand_)].l +
uint32_t(int16_t(prefetch_.w));
Prefetch();
MoveToStateDynamic(PEA_np_nS_ns);
BeginState(JSRJMPAddressRegisterIndirectWithDisplacement):
effective_address_[0].l =
registers_[8 + instruction_.reg(next_operand_)].l +
uint32_t(int16_t(prefetch_.w));
IdleBus(1); // n
temporary_address_.l = instruction_address_.l + 4;
MoveToStateDynamic(post_ea_state_);
//
// ProgramCounterIndirectWithDisplacement
//
BeginStateMode(FetchOperand_bw, ProgramCounterIndirectWithDisplacement):
effective_address_[next_operand_].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, ProgramCounterIndirectWithDisplacement):
effective_address_[1].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, ProgramCounterIndirectWithDisplacement):
effective_address_[1].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, ProgramCounterIndirectWithDisplacement):
effective_address_[next_operand_].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, ProgramCounterIndirectWithDisplacement):
BeginStateMode(CalcEffectiveAddress, ProgramCounterIndirectWithDisplacement):
effective_address_[next_operand_].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, ProgramCounterIndirectWithDisplacement):
effective_address_[0].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
Prefetch();
MoveToStateDynamic(PEA_np_nS_ns);
BeginState(JSRJMPProgramCounterIndirectWithDisplacement):
effective_address_[0].l =
program_counter_.l - 2 +
uint32_t(int16_t(prefetch_.w));
IdleBus(1); // n
temporary_address_.l = instruction_address_.l + 4;
MoveToStateDynamic(post_ea_state_);
//
// AddressRegisterIndirectWithIndex8bitDisplacement
//
#define d8Xn(base) \
base + \
((prefetch_.w & 0x800) ? \
registers_[prefetch_.w >> 12].l : \
uint32_t(int16_t(registers_[prefetch_.w >> 12].w))) + \
uint32_t(int8_t(prefetch_.b));
BeginStateMode(FetchOperand_bw, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[1].l = d8Xn(registers_[8 + instruction_.reg(1)].l);
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[1].l = d8Xn(registers_[8 + instruction_.reg(1)].l);
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AddressRegisterIndirectWithIndex8bitDisplacement):
IdleBus(1); // n
[[fallthrough]];
BeginStateMode(CalcEffectiveAddress, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
Prefetch(); // np
IdleBus(1); // n
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, AddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[0].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
IdleBus(1); // n
Prefetch(); // np
IdleBus(1); // n
MoveToStateDynamic(PEA_np_nS_ns);
BeginState(JSRJMPAddressRegisterIndirectWithIndex8bitDisplacement):
effective_address_[0].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
IdleBus(3); // n nn
temporary_address_.l = instruction_address_.l + 4;
MoveToStateDynamic(post_ea_state_);
BeginState(AddressRegisterIndirectWithIndex8bitDisplacement_n_np):
effective_address_[next_operand_].l = d8Xn(registers_[8 + instruction_.reg(next_operand_)].l);
IdleBus(1); // n
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
//
// ProgramCounterIndirectWithIndex8bitDisplacement
//
BeginStateMode(FetchOperand_bw, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(program_counter_.l - 2);
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[1].l = d8Xn(program_counter_.l - 2);
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[1].l = d8Xn(program_counter_.l - 2);
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(program_counter_.l - 2);
SetDataAddress(effective_address_[next_operand_].l);
IdleBus(1); // n
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, ProgramCounterIndirectWithIndex8bitDisplacement):
IdleBus(1); // n
[[fallthrough]];
BeginStateMode(CalcEffectiveAddress, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[next_operand_].l = d8Xn(program_counter_.l - 2);
Prefetch(); // np
IdleBus(1); // n
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, ProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[0].l = d8Xn(program_counter_.l - 2);
IdleBus(1); // n
Prefetch(); // np
IdleBus(1); // n
MoveToStateDynamic(PEA_np_nS_ns);
BeginState(JSRJMPProgramCounterIndirectWithIndex8bitDisplacement):
effective_address_[0].l = d8Xn(program_counter_.l - 2);
IdleBus(3); // n nn
temporary_address_.l = instruction_address_.l + 4;
MoveToStateDynamic(post_ea_state_);
BeginState(ProgramCounterIndirectWithIndex8bitDisplacement_n_np):
effective_address_[next_operand_].l = d8Xn(program_counter_.l - 2);
IdleBus(1); // n
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
#undef d8Xn
//
// AbsoluteShort
//
BeginStateMode(FetchOperand_bw, AbsoluteShort):
effective_address_[next_operand_].l = uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AbsoluteShort):
effective_address_[1].l = uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AbsoluteShort):
effective_address_[1].l = uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AbsoluteShort):
effective_address_[next_operand_].l = uint32_t(int16_t(prefetch_.w));
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AbsoluteShort):
BeginStateMode(CalcEffectiveAddress, AbsoluteShort):
effective_address_[next_operand_].l = uint32_t(int16_t(prefetch_.w));
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, AbsoluteShort):
effective_address_[0].l = uint32_t(int16_t(prefetch_.w));
MoveToStateSpecific(PEA_np_nS_ns_np);
BeginState(JSRJMPAbsoluteShort):
effective_address_[0].l = uint32_t(int16_t(prefetch_.w));
IdleBus(1); // n
temporary_address_.l = instruction_address_.l + 4;
MoveToStateDynamic(post_ea_state_);
//
// AbsoluteLong
//
BeginStateMode(FetchOperand_bw, AbsoluteLong):
Prefetch(); // np
effective_address_[next_operand_].l = prefetch_.l;
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(MOVE_bw, AbsoluteLong):
Prefetch(); // np
effective_address_[1].l = prefetch_.l;
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, data_select(instruction_));
switch(instruction_.mode(0)) {
case Mode::AddressRegisterDirect:
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
MoveToStateSpecific(MOVE_bw_AbsoluteLong_prefetch_first);
default: break;
}
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(MOVE_bw_AbsoluteLong_prefetch_first):
Prefetch(); // np
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(MOVE_l, AbsoluteLong):
Prefetch(); // np
effective_address_[1].l = prefetch_.l;
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
switch(instruction_.mode(0)) {
case Mode::AddressRegisterDirect:
case Mode::DataRegisterDirect:
case Mode::ImmediateData:
MoveToStateSpecific(MOVE_l_AbsoluteLong_prefetch_first);
default: break;
}
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(MOVE_l_AbsoluteLong_prefetch_first):
Prefetch(); // np
Access(operand_[next_operand_].high); // nW
effective_address_[1].l += 2;
Access(operand_[next_operand_].low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginStateMode(FetchOperand_l, AbsoluteLong):
Prefetch(); // np
effective_address_[next_operand_].l = prefetch_.l;
SetDataAddress(effective_address_[next_operand_].l);
Prefetch(); // np
Access(operand_[next_operand_].high); // nR
effective_address_[next_operand_].l += 2;
Access(operand_[next_operand_].low); // nr
MoveToNextOperand(FetchOperand_l);
BeginStateMode(CalcEffectiveAddressIdleFor8bitDisplacementAndPreDec, AbsoluteLong):
BeginStateMode(CalcEffectiveAddress, AbsoluteLong):
Prefetch(); // np
effective_address_[next_operand_].l = prefetch_.l;
Prefetch(); // np
MoveToStateDynamic(post_ea_state_);
BeginStateMode(PEA, AbsoluteLong):
Prefetch(); // np
effective_address_[0].l = prefetch_.l;
MoveToStateSpecific(PEA_np_nS_ns_np);
BeginState(JSRJMPAbsoluteLong):
Prefetch(); // np
effective_address_[0].l = prefetch_.l;
temporary_address_.l = instruction_address_.l + 6;
MoveToStateDynamic(post_ea_state_);
//
// ImmediateData
//
BeginStateMode(FetchOperand_bw, ImmediateData):
operand_[next_operand_].w = prefetch_.w;
Prefetch(); // np
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(FetchOperand_l, ImmediateData):
Prefetch(); // np
operand_[next_operand_].l = prefetch_.l;
Prefetch(); // np
MoveToNextOperand(FetchOperand_l);
//
// ExtensionWord; always the same size.
//
BeginStateMode(FetchOperand_bw, ExtensionWord):
operand_[next_operand_].w = prefetch_.w;
Prefetch(); // np
MoveToNextOperand(FetchOperand_bw);
BeginStateMode(FetchOperand_l, ExtensionWord):
operand_[next_operand_].w = prefetch_.w;
Prefetch(); // np
MoveToNextOperand(FetchOperand_l);
#undef MoveToNextOperand
// MARK: - Store.
#define MoveToNextOperand(x) \
++next_operand_; \
if(next_operand_ == 2) { \
MoveToStateSpecific(Decode); \
} \
MoveToStateSpecific(x)
// Store operand is a lot simpler: only one operand is ever stored, and its address
// is already known. So this can either skip straight back to ::Decode if the target
// is a register, otherwise a single write operation can occur.
BeginState(StoreOperand):
switch(instruction_.operand_size()) {
case InstructionSet::M68k::DataSize::LongWord:
SetupDataAccess(0, Microcycle::SelectWord);
MoveToStateSpecific(StoreOperand_l);
case InstructionSet::M68k::DataSize::Word:
SetupDataAccess(0, Microcycle::SelectWord);
MoveToStateSpecific(StoreOperand_bw);
case InstructionSet::M68k::DataSize::Byte:
SetupDataAccess(0, Microcycle::SelectByte);
MoveToStateSpecific(StoreOperand_bw);
}
BeginState(StoreOperand_bw):
if(!(operand_flags_ & 0x4 << next_operand_)) {
MoveToNextOperand(StoreOperand_bw);
}
switch(instruction_.mode(next_operand_)) {
// Data register: write only the part of the word that has changed.
case Mode::DataRegisterDirect: {
const uint32_t write_mask = size_masks[int(instruction_.operand_size())];
const int reg = instruction_.reg(next_operand_);
registers_[reg].l =
(operand_[next_operand_].l & write_mask) |
(registers_[reg].l & ~write_mask);
}
MoveToNextOperand(StoreOperand_bw);
// Address register: always rewrite the whole word; the smaller
// result will have been sign extended.
case Mode::AddressRegisterDirect:
registers_[instruction_.lreg(next_operand_)] = operand_[next_operand_];
MoveToNextOperand(StoreOperand_bw);
default: break;
}
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].low); // nw
MoveToNextOperand(StoreOperand_bw);
BeginState(StoreOperand_l):
if(!(operand_flags_ & 0x4 << next_operand_)) {
MoveToNextOperand(StoreOperand_l);
}
if(instruction_.mode(next_operand_) <= Mode::AddressRegisterDirect) {
registers_[instruction_.lreg(next_operand_)] = operand_[next_operand_];
MoveToNextOperand(StoreOperand_l);
}
SetupDataAccess(0, Microcycle::SelectWord);
SetDataAddress(effective_address_[next_operand_].l);
Access(operand_[next_operand_].low); // nw
effective_address_[next_operand_].l -= 2;
Access(operand_[next_operand_].high); // nW
MoveToNextOperand(StoreOperand_l);
#define PerformDynamic() \
InstructionSet::M68k::perform<InstructionSet::M68k::Model::M68000>( \
instruction_, operand_[0], operand_[1], status_, *static_cast<ProcessorBase *>(this));
#define PerformSpecific(x) \
InstructionSet::M68k::perform< \
InstructionSet::M68k::Model::M68000, \
ProcessorBase, \
InstructionSet::M68k::Operation::x \
>( \
instruction_, operand_[0], operand_[1], status_, *static_cast<ProcessorBase *>(this));
//
// Various generic forms of perform.
//
#define MoveToWritePhase() \
if(operand_flags_ & 0x0c) { \
next_operand_ = 0; \
MoveToStateSpecific(StoreOperand); \
} else { \
MoveToStateSpecific(Decode); \
}
BeginState(Perform_np):
PerformDynamic();
Prefetch(); // np
MoveToWritePhase();
BeginState(Perform_np_n):
PerformDynamic();
Prefetch(); // np
IdleBus(1); // n
MoveToWritePhase();
BeginState(Perform_np_nn):
PerformDynamic();
Prefetch(); // np
IdleBus(2); // nn
MoveToWritePhase();
#undef MoveToWritePhase
//
// Specific forms of perform...
//
//
// MOVE
//
BeginState(MOVE_b):
PerformSpecific(MOVEb);
MoveToAddressingMode(MOVE_bw, instruction_.mode(1));
BeginState(MOVE_w):
PerformDynamic(); // Could be MOVE.w or MOVEA.w.
MoveToAddressingMode(MOVE_bw, instruction_.mode(1));
BeginState(MOVE_l):
PerformDynamic(); // Could be MOVE.l or MOVEA.l.
MoveToAddressingMode(MOVE_l, instruction_.mode(1));
//
// [ABCD/SBCD/SUBX/ADDX] (An)-, (An)-
//
BeginState(TwoOp_Predec_bw):
IdleBus(1); // n
SetupDataAccess(Microcycle::Read, select_flag_);
SetDataAddress(registers_[8 + instruction_.reg(0)].l);
registers_[8 + instruction_.reg(0)].l -= address_increments[int(instruction_.operand_size())][instruction_.reg(0)];
Access(operand_[0].low); // nr
SetDataAddress(registers_[8 + instruction_.reg(1)].l);
registers_[8 + instruction_.reg(1)].l -= address_increments[int(instruction_.operand_size())][instruction_.reg(1)];
Access(operand_[1].low); // nr
Prefetch(); // np
PerformDynamic();
SetupDataAccess(0, select_flag_);
Access(operand_[1].low); // nw
MoveToStateSpecific(Decode);
BeginState(TwoOp_Predec_l):
IdleBus(1); // n
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(registers_[8 + instruction_.reg(0)].l);
registers_[8 + instruction_.reg(0)].l -= 2;
Access(operand_[0].low); // nr
registers_[8 + instruction_.reg(0)].l -= 2;
Access(operand_[0].high); // nR
SetDataAddress(registers_[8 + instruction_.reg(1)].l);
registers_[8 + instruction_.reg(1)].l -= 2;
Access(operand_[1].low); // nr
registers_[8 + instruction_.reg(1)].l -= 2;
Access(operand_[1].high); // nR
PerformDynamic();
SetupDataAccess(0, Microcycle::SelectWord);
registers_[8 + instruction_.reg(1)].l += 2;
Access(operand_[1].low); // nw
Prefetch(); // np
registers_[8 + instruction_.reg(1)].l -= 2;
Access(operand_[1].high); // nW
MoveToStateSpecific(Decode);
//
// CHK
//
BeginState(CHK):
Prefetch(); // np
PerformSpecific(CHKw);
// Proper next state will have been set by the flow controller
// call-in; just allow dispatch to whatever it was.
break;
BeginState(CHK_no_trap):
IdleBus(3); // nn n
MoveToStateSpecific(Decode);
BeginState(CHK_was_over):
IdleBus(2); // nn
ReloadInstructionAddress();
RaiseException(InstructionSet::M68k::Exception::CHK);
BeginState(CHK_was_under):
IdleBus(3); // n nn
ReloadInstructionAddress();
RaiseException(InstructionSet::M68k::Exception::CHK);
//
// Scc
//
BeginState(Scc_Dn):
Prefetch(); // np
PerformSpecific(Scc);
// Next state will be set by did_scc.
break;
BeginState(Scc_Dn_did_set):
IdleBus(1); // n
[[fallthrough]];
BeginState(Scc_Dn_did_not_set):
next_operand_ = 0;
MoveToStateSpecific(StoreOperand);
//
// DBcc
//
BeginState(DBcc):
operand_[0] = registers_[instruction_.reg(0)];
operand_[1].w = uint16_t(int16_t(prefetch_.w));
PerformSpecific(DBcc);
registers_[instruction_.reg(0)].w = operand_[0].w;
// Next state was set by complete_dbcc.
break;
BeginState(DBcc_branch_taken):
IdleBus(1); // n
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(DBcc_condition_true):
IdleBus(2); // n n
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(DBcc_counter_overflow):
IdleBus(1); // n
// Yacht lists an extra np here; I'm assuming it's a read from where
// the PC would have gone, had the branch been taken. So do that,
// but then reset the PC to where it would have been.
Prefetch(); // np
program_counter_.l = instruction_address_.l + 4;
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// Bcc [.b and .w]
//
BeginState(Bccb):
operand_[0].b = uint8_t(opcode_);
PerformSpecific(Bccb);
// Next state was set by complete_bcc.
break;
BeginState(Bccw):
operand_[0].w = prefetch_.w;
PerformSpecific(Bccw);
// Next state was set by complete_bcc.
break;
BeginState(Bcc_branch_taken):
IdleBus(1); // n
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(Bccb_branch_not_taken):
IdleBus(2); // nn
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(Bccw_branch_not_taken):
IdleBus(2); // nn
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
#define Push(x) \
SetupDataAccess(0, Microcycle::SelectWord); \
SetDataAddress(registers_[15].l); \
registers_[15].l -= 4; \
Access(x.high); \
registers_[15].l += 2; \
Access(x.low); \
registers_[15].l -= 2;
#define Pop(x) \
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord); \
SetDataAddress(registers_[15].l); \
Access(x.high); \
registers_[15].l += 2; \
Access(x.low); \
registers_[15].l += 2;
//
// BSR
//
BeginState(BSRb):
BeginState(BSRw):
IdleBus(1); // n
// Calculate the address of the next instruction and the next program counter.
if(instruction_.operand_size() == InstructionSet::M68k::DataSize::Word) {
temporary_address_.l = instruction_address_.l + 4;
program_counter_.l = instruction_address_.l + uint32_t(int16_t(prefetch_.w)) + 2;
} else {
temporary_address_.l = instruction_address_.l + 2;
program_counter_.l = instruction_address_.l + uint32_t(int8_t(opcode_)) + 2;
}
// Push the next instruction address to the stack.
Push(temporary_address_);
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// JSR [push only; address calculation elsewhere], JMP
//
BeginState(JSR):
// Update the program counter and prefetch once.
program_counter_.l = effective_address_[0].l;
Prefetch(); // np
// Push the old PC onto the stack in upper, lower order.
Push(temporary_address_);
// Prefetch once more.
Prefetch();
MoveToStateSpecific(Decode);
BeginState(JMP):
// Update the program counter and prefetch once.
program_counter_.l = effective_address_[0].l;
Prefetch(); // np
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// BSET, BCHG, BCLR
//
BeginState(BCHG_BSET_Dn):
PerformDynamic();
Prefetch();
IdleBus(1 + dynamic_instruction_length_);
registers_[instruction_.reg(1)] = operand_[1];
MoveToStateSpecific(Decode);
BeginState(BCLR_Dn):
PerformSpecific(BCLR);
Prefetch();
IdleBus(2 + dynamic_instruction_length_);
registers_[instruction_.reg(1)] = operand_[1];
MoveToStateSpecific(Decode);
//
// MOVEP
//
BeginState(MOVEPtoM_l):
temporary_address_.l = registers_[8 + instruction_.reg(1)].l + uint32_t(int16_t(prefetch_.w));
SetDataAddress(temporary_address_.l);
SetupDataAccess(0, Microcycle::SelectByte);
Prefetch(); // np
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l >> 24);
Access(temporary_value_.low); // nW
temporary_address_.l += 2;
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l >> 16);
Access(temporary_value_.low); // nW
temporary_address_.l += 2;
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l >> 8);
Access(temporary_value_.low); // nw
temporary_address_.l += 2;
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l);
Access(temporary_value_.low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(MOVEPtoM_w):
temporary_address_.l = registers_[8 + instruction_.reg(1)].l + uint32_t(int16_t(prefetch_.w));
SetDataAddress(temporary_address_.l);
SetupDataAccess(0, Microcycle::SelectByte);
Prefetch(); // np
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l >> 8);
Access(temporary_value_.low); // nW
temporary_address_.l += 2;
temporary_value_.b = uint8_t(registers_[instruction_.reg(0)].l);
Access(temporary_value_.low); // nw
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(MOVEPtoR_l):
temporary_address_.l = registers_[8 + instruction_.reg(0)].l + uint32_t(int16_t(prefetch_.w));
SetDataAddress(temporary_address_.l);
SetupDataAccess(Microcycle::Read, Microcycle::SelectByte);
Prefetch(); // np
Access(temporary_value_.low); // nR
registers_[instruction_.reg(1)].l = uint32_t(temporary_value_.b << 24);
temporary_address_.l += 2;
Access(temporary_value_.low); // nR
registers_[instruction_.reg(1)].l |= uint32_t(temporary_value_.b << 16);
temporary_address_.l += 2;
Access(temporary_value_.low); // nr
registers_[instruction_.reg(1)].l |= uint32_t(temporary_value_.b << 8);
temporary_address_.l += 2;
Access(temporary_value_.low); // nr
registers_[instruction_.reg(1)].l |= uint32_t(temporary_value_.b);
Prefetch(); // np
MoveToStateSpecific(Decode);
BeginState(MOVEPtoR_w):
temporary_address_.l = registers_[8 + instruction_.reg(0)].l + uint32_t(int16_t(prefetch_.w));
SetDataAddress(temporary_address_.l);
SetupDataAccess(Microcycle::Read, Microcycle::SelectByte);
Prefetch(); // np
Access(temporary_value_.low); // nR
registers_[instruction_.reg(1)].w = uint16_t(temporary_value_.b << 8);
temporary_address_.l += 2;
Access(temporary_value_.low); // nr
registers_[instruction_.reg(1)].w |= uint16_t(temporary_value_.b);
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// [EORI/ORI/ANDI] #, [CCR/SR]
//
BeginState(LogicalToSR):
IdleBus(4);
// Perform the operation.
PerformDynamic();
// Recede the program counter and prefetch twice.
program_counter_.l -= 2;
Prefetch();
Prefetch();
MoveToStateSpecific(Decode);
//
// MOVEM M --> R
//
BeginState(MOVEMtoR):
post_ea_state_ =
(instruction_.operation == InstructionSet::M68k::Operation::MOVEMtoRl) ?
MOVEMtoR_l_read : MOVEMtoR_w_read;
next_operand_ = 1;
register_index_ = 0;
SetDataAddress(effective_address_[1].l);
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
switch(instruction_.mode(1)) {
case Mode::AddressRegisterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(AddressRegisterIndirectWithIndex8bitDisplacement_n_np);
case Mode::ProgramCounterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(ProgramCounterIndirectWithIndex8bitDisplacement_n_np);
default:
MoveToStateSpecific(CalcEffectiveAddress);
}
BeginState(MOVEMtoR_w_read):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoR_finish);
}
// Find the next register to read, read it and sign extend it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
++register_index_;
}
Access(registers_[register_index_].low);
registers_[register_index_].l = uint32_t(int16_t(registers_[register_index_].w));
effective_address_[1].l += 2;
// Drop the bottom bit.
operand_[0].w >>= 1;
++register_index_;
MoveToStateSpecific(MOVEMtoR_w_read);
BeginState(MOVEMtoR_l_read):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoR_finish);
}
// Find the next register to read, read it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
++register_index_;
}
Access(registers_[register_index_].high);
effective_address_[1].l += 2;
Access(registers_[register_index_].low);
effective_address_[1].l += 2;
// Drop the bottom bit.
operand_[0].w >>= 1;
++register_index_;
MoveToStateSpecific(MOVEMtoR_l_read);
BeginState(MOVEMtoR_finish):
// Perform one more read, spuriously.
Access(temporary_value_.low); // nr
// Write the address back to the register if
// this was postincrement mode.
if(instruction_.mode(1) == Mode::AddressRegisterIndirectWithPostincrement) {
registers_[8 + instruction_.reg(1)].l = effective_address_[1].l;
}
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// MOVEM R --> M
//
BeginState(MOVEMtoM):
next_operand_ = 1;
SetDataAddress(effective_address_[1].l);
SetupDataAccess(0, Microcycle::SelectWord);
register_index_ = 0;
post_ea_state_ =
(instruction_.operation == InstructionSet::M68k::Operation::MOVEMtoMl) ?
MOVEMtoM_l_write : MOVEMtoM_w_write;
// Predecrement writes registers the other way around, but still reads the
// mask from LSB.
switch(instruction_.mode(1)) {
case Mode::AddressRegisterIndirectWithPredecrement:
register_index_ = 15;
effective_address_[1].l = registers_[8 + instruction_.reg(1)].l;
// Don't go through the usual calculate EA path because: (i) the test above
// has already told us the addressing mode, and it's trivial; and (ii) the
// predecrement isn't actually wanted.
if(instruction_.operation == InstructionSet::M68k::Operation::MOVEMtoMl) {
MoveToStateSpecific(MOVEMtoM_l_write_predec);
} else {
MoveToStateSpecific(MOVEMtoM_w_write_predec);
}
break;
case Mode::AddressRegisterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(AddressRegisterIndirectWithIndex8bitDisplacement_n_np);
case Mode::ProgramCounterIndirectWithIndex8bitDisplacement:
MoveToStateSpecific(ProgramCounterIndirectWithIndex8bitDisplacement_n_np);
default:
MoveToStateSpecific(CalcEffectiveAddress);
}
BeginState(MOVEMtoM_w_write):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoM_finish);
}
// Find the next register to write, write it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
++register_index_;
}
Access(registers_[register_index_].low);
effective_address_[1].l += 2;
// Drop the bottom bit.
operand_[0].w >>= 1;
++register_index_;
MoveToStateSpecific(MOVEMtoM_w_write);
BeginState(MOVEMtoM_l_write):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoM_finish);
}
// Find the next register to write, write it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
++register_index_;
}
Access(registers_[register_index_].high);
effective_address_[1].l += 2;
Access(registers_[register_index_].low);
effective_address_[1].l += 2;
// Drop the bottom bit.
operand_[0].w >>= 1;
++register_index_;
MoveToStateSpecific(MOVEMtoM_l_write);
BeginState(MOVEMtoM_w_write_predec):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoM_finish);
}
// Find the next register to write, write it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
--register_index_;
}
effective_address_[1].l -= 2;
Access(registers_[register_index_].low);
// Drop the bottom bit.
operand_[0].w >>= 1;
--register_index_;
MoveToStateSpecific(MOVEMtoM_w_write_predec);
BeginState(MOVEMtoM_l_write_predec):
// If there's nothing left to read, move on.
if(!operand_[0].w) {
MoveToStateSpecific(MOVEMtoM_finish);
}
// Find the next register to write, write it.
while(!(operand_[0].w & 1)) {
operand_[0].w >>= 1;
--register_index_;
}
effective_address_[1].l -= 2;
Access(registers_[register_index_].low);
effective_address_[1].l -= 2;
Access(registers_[register_index_].high);
// Drop the bottom bit.
operand_[0].w >>= 1;
--register_index_;
MoveToStateSpecific(MOVEMtoM_l_write_predec);
BeginState(MOVEMtoM_finish):
// Write the address back to the register if
// this was predecrement mode.
if(instruction_.mode(1) == Mode::AddressRegisterIndirectWithPredecrement) {
registers_[8 + instruction_.reg(1)].l = effective_address_[1].l;
}
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// DIVU and DIVUS
//
BeginState(DIVU_DIVS):
// Set a no-interrupt-occurred sentinel.
exception_vector_ = -1;
// Perform the instruction.
PerformDynamic();
// Delay the correct amount of time.
IdleBus(dynamic_instruction_length_);
// Either dispatch an exception or don't.
if(exception_vector_ >= 0) {
MoveToStateSpecific(StandardException);
}
// DIVU and DIVS are always to a register, so just write back here
// to save on dispatch costs.
registers_[instruction_.reg(1)] = operand_[1];
Prefetch(); // np
MoveToStateSpecific(Decode);
//
// MULU, MULS and shifts
//
BeginState(Perform_idle_dyamic_Dn):
Prefetch(); // np
// Perform the instruction.
PerformDynamic();
// Delay the correct amount of time.
IdleBus(dynamic_instruction_length_);
// MULU and MULS are always to a register, so just write back here
// to save on dispatch costs.
registers_[instruction_.reg(1)] = operand_[1];
MoveToStateSpecific(Decode);
//
// LEA
//
BeginState(LEA):
registers_[8 + instruction_.reg(1)].l = effective_address_[0].l;
Prefetch();
MoveToStateSpecific(Decode);
//
// PEA
//
BeginState(PEA):
MoveToAddressingMode(PEA, instruction_.mode(0));
BeginState(PEA_np_nS_ns):
Prefetch();
Push(effective_address_[0]);
MoveToStateSpecific(Decode);
BeginState(PEA_np_nS_ns_np):
Prefetch();
Push(effective_address_[0]);
Prefetch();
MoveToStateSpecific(Decode);
//
// TAS
//
BeginState(TAS):
// Populate all addresses.
tas_cycles[0].address = tas_cycles[1].address =
tas_cycles[2].address =
tas_cycles[3].address = tas_cycles[4].address = &effective_address_[0].l;
// Populate values to the relevant subset.
tas_cycles[0].value = tas_cycles[1].value =
tas_cycles[3].value = tas_cycles[4].value = &operand_[0].low;
// First two parts: the read.
PerformBusOperation(tas_cycles[0]);
CompleteAccess(tas_cycles[1]);
// Third part: processing time.
PerformBusOperation(tas_cycles[2]);
// Do the actual TAS operation.
status_.overflow_flag = status_.carry_flag = 0;
status_.zero_result = operand_[0].b;
status_.negative_flag = operand_[0].b & 0x80;
// Final parts: write back.
operand_[0].b |= 0x80;
PerformBusOperation(tas_cycles[3]);
CompleteAccess(tas_cycles[4]);
Prefetch();
MoveToStateSpecific(Decode);
//
// MOVE to [CCR/SR]
//
BeginState(MOVEtoCCRSR):
PerformDynamic();
// Rewind the program counter and prefetch twice.
IdleBus(2);
program_counter_.l -= 2;
Prefetch();
Prefetch();
MoveToStateSpecific(Decode);
//
// RTR, RTS, RTE
//
BeginState(RTS):
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
Access(program_counter_.high);
registers_[15].l += 2;
Access(program_counter_.low);
registers_[15].l += 2;
Prefetch();
Prefetch();
MoveToStateSpecific(Decode);
// Yacht cites the bus activity for RTE and RTR as nS ns ns, so
// the program counter high word must be the first thing
// retrieved; the order of the other two is a guess,
// being the converse of the write order.
BeginState(RTE):
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
registers_[15].l += 2;
Access(program_counter_.high);
registers_[15].l -= 2;
Access(temporary_value_.low);
registers_[15].l += 4;
Access(program_counter_.low);
registers_[15].l += 2;
status_.set_status(temporary_value_.w);
did_update_status();
Prefetch();
Prefetch();
MoveToStateSpecific(Decode);
BeginState(RTR):
SetupDataAccess(Microcycle::Read, Microcycle::SelectWord);
SetDataAddress(registers_[15].l);
registers_[15].l += 2;
Access(program_counter_.high);
registers_[15].l -= 2;
Access(temporary_value_.low);
registers_[15].l += 4;
Access(program_counter_.low);
registers_[15].l += 2;
status_.set_ccr(temporary_value_.w);
Prefetch();
Prefetch();
MoveToStateSpecific(Decode);
//
// LINK[.w] and UNLINK
//
BeginState(LINKw):
Prefetch();
// Ensure that the stack pointer is [seemingly] captured after
// having been decremented by four, if it's what should be captured.
registers_[15].l -= 4;
temporary_address_ = registers_[8 + instruction_.reg(0)];
registers_[15].l += 4;
// Push will actually decrement the stack pointer.
Push(temporary_address_);
// Make the exchange.
registers_[8 + instruction_.reg(0)].l = registers_[15].l;
registers_[15].l += uint32_t(int16_t(prefetch_.high.w));
Prefetch();
MoveToStateSpecific(Decode);
BeginState(UNLINK):
registers_[15] = registers_[8 + instruction_.reg(0)];
Pop(temporary_address_);
registers_[8 + instruction_.reg(0)] = temporary_address_;
Prefetch();
MoveToStateSpecific(Decode);
//
// RESET
//
BeginState(RESET):
IdleBus(2);
PerformBusOperation(reset_cycle);
Prefetch();
MoveToStateSpecific(Decode);
//
// NOP
//
BeginState(NOP):
Prefetch();
MoveToStateSpecific(Decode);
//
// TRAP, TRAPV
//
// TODO: which program counter is appropriate for TRAP? That of the TRAP,
// or that of the instruction after?
BeginState(TRAP):
IdleBus(2);
instruction_address_.l += 2; // Push the address of the instruction after the trap.
RaiseException((opcode_ & 15) + InstructionSet::M68k::Exception::TrapBase);
BeginState(TRAPV):
Prefetch();
if(!status_.overflow_flag) {
MoveToStateSpecific(Decode);
}
instruction_address_.l += 2; // Push the address of the instruction after the trap.
RaiseException(InstructionSet::M68k::Exception::TRAPV);
default:
printf("Unhandled state: %d; opcode is %04x\n", state_, opcode_);
assert(false);
}}
#undef Pop
#undef Push
#undef PerformDynamic
#undef PerformSpecific
#undef RaiseException
#undef Prefetch
#undef ReadProgramWord
#undef ReadDataWord
#undef AccessPair
#undef CompleteAccess
#undef WaitForDTACK
#undef IdleBus
#undef PerformBusOperation
#undef MoveToStateSpecific
#undef MoveToStateDynamic
#undef CheckOverrun
#undef Spend
#undef ConsiderExit
#undef ReloadInstructionAddress
#undef MoveToAddressingMode
#undef BeginStateMode
}
// MARK: - Flow Controller.
void ProcessorBase::did_update_status() {
// Shuffle the stack pointers.
stack_pointers_[is_supervisor_] = registers_[15];
registers_[15] = stack_pointers_[int(status_.is_supervisor)];
is_supervisor_ = int(status_.is_supervisor);
}
void ProcessorBase::did_chk(bool was_under, bool was_over) {
if(was_over) {
state_ = CHK_was_over;
} else if(was_under) {
state_ = CHK_was_under;
} else {
state_ = CHK_no_trap;
}
}
void ProcessorBase::did_scc(bool did_set_ff) {
state_ = did_set_ff ? Scc_Dn_did_set : Scc_Dn_did_not_set;
}
void ProcessorBase::complete_dbcc(bool matched_condition, bool overflowed, int16_t offset) {
// The actual DBcc rule is: branch if !matched_condition and !overflowed; but I think
// that a spurious read from the intended destination PC occurs if overflowed, so update
// the PC for any case of !matched_condition and rely on the DBcc_counter_overflow to
// set it back.
if(!matched_condition) {
state_ = overflowed ? DBcc_counter_overflow : DBcc_branch_taken;
program_counter_.l = instruction_address_.l + uint32_t(offset) + 2;
return;
}
state_ = DBcc_condition_true;
}
template <typename IntT> void ProcessorBase::complete_bcc(bool take_branch, IntT offset) {
if(take_branch) {
program_counter_.l = instruction_address_.l + uint32_t(offset) + 2;
state_ = Bcc_branch_taken;
return;
}
state_ =
(instruction_.operation == InstructionSet::M68k::Operation::Bccb) ?
Bccb_branch_not_taken : Bccw_branch_not_taken;
}
void ProcessorBase::did_bit_op(int bit_position) {
dynamic_instruction_length_ = int(bit_position > 15);
}
template <bool did_overflow> void ProcessorBase::did_divu(uint32_t dividend, uint32_t divisor) {
if(!divisor) {
dynamic_instruction_length_ = 4; // nn nn precedes the usual exception activity.
return;
}
if(did_overflow) {
dynamic_instruction_length_ = 3; // Covers the nn n to get into the loop.
return;
}
// Calculate cost; this is based on the flowchart in yacht.txt.
// I could actually calculate the division result using this code,
// since this is a classic divide algorithm, but would rather that
// errors produce incorrect timing only, not incorrect timing plus
// incorrect results.
dynamic_instruction_length_ =
3 + // nn n to get into the loop;
30 + // nn per iteration of the loop below;
3; // n nn upon completion of the loop.
divisor <<= 16;
for(int c = 0; c < 15; ++c) {
if(dividend & 0x8000'0000) {
dividend = (dividend << 1) - divisor;
} else {
dividend <<= 1;
// Yacht.txt, and indeed a real microprogram, would just subtract here
// and test the sign of the result, but this is easier to follow:
if (dividend >= divisor) {
dividend -= divisor;
dynamic_instruction_length_ += 1; // i.e. the original nn plus one further n before going down the MSB=0 route.
} else {
dynamic_instruction_length_ += 2; // The costliest path (since in real life it's a subtraction and then a step
// back from there) — all costs accrue. So the fixed nn loop plus another n,
// plus another one.
}
}
}
}
#define convert_to_bit_count_16(x) \
x = ((x & 0xaaaa) >> 1) + (x & 0x5555); \
x = ((x & 0xcccc) >> 2) + (x & 0x3333); \
x = ((x & 0xf0f0) >> 4) + (x & 0x0f0f); \
x = ((x & 0xff00) >> 8) + (x & 0x00ff);
template <bool did_overflow> void ProcessorBase::did_divs(int32_t dividend, int32_t divisor) {
// The route to spotting divide by 0 is just nn nn.
if(!divisor) {
dynamic_instruction_length_ = 4; // nn nn precedes the usual exception activity.
return;
}
// It's either six or seven microcycles to get into the main loop, depending
// on dividend sign.
dynamic_instruction_length_ = 6 + (dividend < 0);
if(did_overflow) {
return;
}
// There's a fixed cost per bit, plus an additional one for each that is zero.
//
// The sign bit does not count here; it's the high fifteen bits that matter
// only, in the unsigned version of the result.
//
// Disclaimer: per the flowchart it looks to me like this constant should be 60
// rather than 49 — four microcycles per bit. But the number 49 makes this
// algorithm exactly fit the stated minimum and maximum costs. Possibly the
// undefined difference between a nop cycle an an idle wait is relevant here?
dynamic_instruction_length_ += 49;
int result_bits = ~abs(dividend / divisor) & 0xfffe;
convert_to_bit_count_16(result_bits);
dynamic_instruction_length_ += result_bits;
// Determine the tail cost; a divisor of less than 0 leads to one exit,
// a divisor of greater than zero makes the result a function of the
// sign of the dividend.
//
// In all cases, this is counting from 'No more bits' in the Yacht diagram.
if(divisor < 0) {
dynamic_instruction_length_ += 4;
return;
}
if(dividend < 0) {
dynamic_instruction_length_ += 5;
} else {
dynamic_instruction_length_ += 3;
}
}
template <typename IntT> void ProcessorBase::did_mulu(IntT multiplier) {
// Count number of bits set.
convert_to_bit_count_16(multiplier);
dynamic_instruction_length_ = 17 + multiplier;
}
template <typename IntT> void ProcessorBase::did_muls(IntT multiplier) {
// Count number of transitions from 0 to 1 or from 1 to 0 — i.e. the
// number of times that a bit is not equal to the one to its right.
// Treat the bit to the right of b0 as 0.
int number_of_pairs = (multiplier ^ (multiplier << 1)) & 0xffff;
convert_to_bit_count_16(number_of_pairs);
dynamic_instruction_length_ = 17 + number_of_pairs;
}
#undef convert_to_bit_count_16
template <typename IntT> void ProcessorBase::did_shift(int bits_shifted) {
if constexpr (sizeof(IntT) == 4) {
dynamic_instruction_length_ = bits_shifted + 2;
} else {
dynamic_instruction_length_ = bits_shifted + 1;
}
}
template <bool use_current_instruction_pc> void ProcessorBase::raise_exception(int vector) {
// No overt action is taken here; instructions that might throw an exception are required
// to check-in after the fact.
//
// As implemented above, that means:
//
// * DIVU;
// * DIVS.
exception_vector_ = vector;
}
inline void ProcessorBase::tas(Preinstruction instruction, uint32_t) {
// This will be reached only if addressing mode is Dn.
const uint8_t value = registers_[instruction.reg(0)].b;
registers_[instruction.reg(0)].b |= 0x80;
status_.overflow_flag = status_.carry_flag = 0;
status_.zero_result = value;
status_.negative_flag = value & 0x80;
}
inline void ProcessorBase::move_to_usp(uint32_t address) {
stack_pointers_[0].l = address;
}
inline void ProcessorBase::move_from_usp(uint32_t &address) {
address = stack_pointers_[0].l;
}
// MARK: - External state.
template <class BusHandler, bool dtack_is_implicit, bool permit_overrun, bool signal_will_perform>
CPU::MC68000::State Processor<BusHandler, dtack_is_implicit, permit_overrun, signal_will_perform>::get_state() {
CPU::MC68000::State state;
// This isn't true, but will ensure that both stack_pointers_ have their proper values.
did_update_status();
for(int c = 0; c < 7; c++) {
state.registers.data[c] = registers_[c].l;
state.registers.address[c] = registers_[c + 8].l;
}
state.registers.data[7] = registers_[7].l;
state.registers.program_counter = program_counter_.l;
state.registers.status = status_.status();
state.registers.user_stack_pointer = stack_pointers_[0].l;
state.registers.supervisor_stack_pointer = stack_pointers_[1].l;
state.prefetch[0] = prefetch_.high.w;
state.prefetch[1] = prefetch_.low.w;
return state;
}
template <class BusHandler, bool dtack_is_implicit, bool permit_overrun, bool signal_will_perform>
void Processor<BusHandler, dtack_is_implicit, permit_overrun, signal_will_perform>::set_state(const CPU::MC68000::State &state) {
// Copy registers and the program counter.
for(int c = 0; c < 7; c++) {
registers_[c].l = state.registers.data[c];
registers_[c + 8].l = state.registers.address[c];
}
registers_[7].l = state.registers.data[7];
program_counter_.l = state.registers.program_counter;
// Set status first in order to get the proper is-supervisor flag in place.
status_.set_status(state.registers.status);
// Update stack pointers, being careful to copy the right one.
stack_pointers_[0].l = state.registers.user_stack_pointer;
stack_pointers_[1].l = state.registers.supervisor_stack_pointer;
registers_[15] = stack_pointers_[is_supervisor_];
// Ensure the local is-supervisor flag is updated.
did_update_status();
// Populate the prefetch.
prefetch_.high.w = state.prefetch[0];
prefetch_.low.w = state.prefetch[1];
}
template <class BusHandler, bool dtack_is_implicit, bool permit_overrun, bool signal_will_perform>
void Processor<BusHandler, dtack_is_implicit, permit_overrun, signal_will_perform>::decode_from_state(const InstructionSet::M68k::RegisterSet &registers) {
// Populate registers.
CPU::MC68000::State state;
state.registers = registers;
set_state(state);
// Ensure the state machine will resume at decode.
state_ = Decode;
// Fill the prefetch queue.
captured_interrupt_level_ = bus_interrupt_level_;
read_program.value = &prefetch_.high;
bus_handler_.perform_bus_operation(read_program_announce, is_supervisor_);
bus_handler_.perform_bus_operation(read_program, is_supervisor_);
program_counter_.l += 2;
read_program.value = &prefetch_.low;
bus_handler_.perform_bus_operation(read_program_announce, is_supervisor_);
bus_handler_.perform_bus_operation(read_program, is_supervisor_);
program_counter_.l += 2;
}
template <class BusHandler, bool dtack_is_implicit, bool permit_overrun, bool signal_will_perform>
void Processor<BusHandler, dtack_is_implicit, permit_overrun, signal_will_perform>::reset() {
state_ = Reset;
time_remaining_ = HalfCycles(0);
}
#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif
}
#endif /* MC68000Implementation_h */
Reference in New Issue View Git Blame Copy Permalink