1
0
mirror of https://github.com/TomHarte/CLK.git synced 2024-11-11 14:05:21 +00:00
CLK/Machines/Oric/Oric.cpp

294 lines
8.1 KiB
C++

//
// Oric.cpp
// Clock Signal
//
// Created by Thomas Harte on 11/10/2016.
// Copyright © 2016 Thomas Harte. All rights reserved.
//
#include "Oric.hpp"
#include "CharacterMapper.hpp"
#include "../MemoryFuzzer.hpp"
#include <memory>
using namespace Oric;
Machine::Machine() :
use_fast_tape_hack_(false),
typer_delay_(2500000),
keyboard_read_count_(0),
keyboard_(new Keyboard),
ram_top_(0xbfff),
paged_rom_(rom_),
microdisc_is_enabled_(false) {
set_clock_rate(1000000);
via_.set_interrupt_delegate(this);
via_.keyboard = keyboard_;
clear_all_keys();
via_.tape->set_delegate(this);
Memory::Fuzz(ram_, sizeof(ram_));
}
void Machine::configure_as_target(const StaticAnalyser::Target &target) {
if(target.tapes.size()) {
via_.tape->set_tape(target.tapes.front());
}
if(target.loadingCommand.length()) {
set_typer_for_string(target.loadingCommand.c_str());
}
if(target.oric.has_microdisc) {
microdisc_is_enabled_ = true;
microdisc_did_change_paging_flags(&microdisc_);
microdisc_.set_delegate(this);
}
int drive_index = 0;
for(auto disk : target.disks) {
if(drive_index < 4) microdisc_.set_disk(disk, drive_index);
drive_index++;
}
if(target.oric.use_atmos_rom) {
memcpy(rom_, basic11_rom_.data(), std::min(basic11_rom_.size(), sizeof(rom_)));
is_using_basic11_ = true;
tape_get_byte_address_ = 0xe6c9;
scan_keyboard_address_ = 0xf495;
tape_speed_address_ = 0x024d;
} else {
memcpy(rom_, basic10_rom_.data(), std::min(basic10_rom_.size(), sizeof(rom_)));
is_using_basic11_ = false;
tape_get_byte_address_ = 0xe630;
scan_keyboard_address_ = 0xf43c;
tape_speed_address_ = 0x67;
}
}
void Machine::set_typer_for_string(const char *string) {
std::unique_ptr<CharacterMapper> mapper(new CharacterMapper);
Utility::TypeRecipient::set_typer_for_string(string, std::move(mapper));
}
void Machine::set_rom(ROM rom, const std::vector<uint8_t> &data) {
switch(rom) {
case BASIC11: basic11_rom_ = std::move(data); break;
case BASIC10: basic10_rom_ = std::move(data); break;
case Microdisc: microdisc_rom_ = std::move(data); break;
case Colour:
colour_rom_ = std::move(data);
if(video_output_) video_output_->set_colour_rom(colour_rom_);
break;
}
}
Cycles Machine::perform_bus_operation(CPU::MOS6502::BusOperation operation, uint16_t address, uint8_t *value) {
if(address > ram_top_) {
if(isReadOperation(operation)) *value = paged_rom_[address - ram_top_ - 1];
// 024D = 0 => fast; otherwise slow
// E6C9 = read byte: return byte in A
if(address == tape_get_byte_address_ && paged_rom_ == rom_ && use_fast_tape_hack_ && operation == CPU::MOS6502::BusOperation::ReadOpcode && via_.tape->has_tape() && !via_.tape->get_tape()->is_at_end()) {
uint8_t next_byte = via_.tape->get_next_byte(!ram_[tape_speed_address_]);
set_value_of_register(CPU::MOS6502::A, next_byte);
set_value_of_register(CPU::MOS6502::Flags, next_byte ? 0 : CPU::MOS6502::Flag::Zero);
*value = 0x60; // i.e. RTS
}
} else {
if((address & 0xff00) == 0x0300) {
if(microdisc_is_enabled_ && address >= 0x0310) {
switch(address) {
case 0x0310: case 0x0311: case 0x0312: case 0x0313:
if(isReadOperation(operation)) *value = microdisc_.get_register(address);
else microdisc_.set_register(address, *value);
break;
case 0x314: case 0x315: case 0x316: case 0x317:
if(isReadOperation(operation)) *value = microdisc_.get_interrupt_request_register();
else microdisc_.set_control_register(*value);
break;
case 0x318: case 0x319: case 0x31a: case 0x31b:
if(isReadOperation(operation)) *value = microdisc_.get_data_request_register();
break;
}
} else {
if(isReadOperation(operation)) *value = via_.get_register(address);
else via_.set_register(address, *value);
}
} else {
if(isReadOperation(operation))
*value = ram_[address];
else {
if(address >= 0x9800 && address <= 0xc000) { update_video(); typer_delay_ = 0; }
ram_[address] = *value;
}
}
}
if(typer_ && address == scan_keyboard_address_ && operation == CPU::MOS6502::BusOperation::ReadOpcode) {
// the Oric 1 misses any key pressed on the very first entry into the read keyboard routine, so don't
// do anything until at least the second, regardless of machine
if(!keyboard_read_count_) keyboard_read_count_++;
else if(!typer_->type_next_character()) {
clear_all_keys();
typer_.reset();
}
}
via_.run_for(Cycles(1));
if(microdisc_is_enabled_) microdisc_.run_for(Cycles(8));
cycles_since_video_update_++;
return Cycles(1);
}
void Machine::flush() {
update_video();
via_.flush();
}
void Machine::update_video() {
video_output_->run_for(cycles_since_video_update_.flush());
}
void Machine::setup_output(float aspect_ratio) {
via_.ay8910.reset(new GI::AY38910());
via_.ay8910->set_clock_rate(1000000);
video_output_.reset(new VideoOutput(ram_));
if(!colour_rom_.empty()) video_output_->set_colour_rom(colour_rom_);
}
void Machine::close_output() {
video_output_.reset();
via_.ay8910.reset();
}
void Machine::mos6522_did_change_interrupt_status(void *mos6522) {
set_interrupt_line();
}
void Machine::set_key_state(uint16_t key, bool isPressed) {
if(key == KeyNMI) {
set_nmi_line(isPressed);
} else {
if(isPressed)
keyboard_->rows[key >> 8] |= (key & 0xff);
else
keyboard_->rows[key >> 8] &= ~(key & 0xff);
}
}
void Machine::clear_all_keys() {
memset(keyboard_->rows, 0, sizeof(keyboard_->rows));
}
void Machine::set_use_fast_tape_hack(bool activate) {
use_fast_tape_hack_ = activate;
}
void Machine::set_output_device(Outputs::CRT::OutputDevice output_device) {
video_output_->set_output_device(output_device);
}
void Machine::tape_did_change_input(Storage::Tape::BinaryTapePlayer *tape_player) {
// set CB1
via_.set_control_line_input(VIA::Port::B, VIA::Line::One, !tape_player->get_input());
}
std::shared_ptr<Outputs::CRT::CRT> Machine::get_crt() {
return video_output_->get_crt();
}
std::shared_ptr<Outputs::Speaker> Machine::get_speaker() {
return via_.ay8910;
}
void Machine::run_for(const Cycles cycles) {
CPU::MOS6502::Processor<Machine>::run_for(cycles);
}
#pragma mark - The 6522
Machine::VIA::VIA() :
MOS::MOS6522<Machine::VIA>(),
tape(new TapePlayer) {}
void Machine::VIA::set_control_line_output(Port port, Line line, bool value) {
if(line) {
if(port) ay_bdir_ = value; else ay_bc1_ = value;
update_ay();
}
}
void Machine::VIA::set_port_output(Port port, uint8_t value, uint8_t direction_mask) {
if(port) {
keyboard->row = value;
tape->set_motor_control(value & 0x40);
} else {
ay8910->set_data_input(value);
}
}
uint8_t Machine::VIA::get_port_input(Port port) {
if(port) {
uint8_t column = ay8910->get_port_output(false) ^ 0xff;
return (keyboard->rows[keyboard->row & 7] & column) ? 0x08 : 0x00;
} else {
return ay8910->get_data_output();
}
}
void Machine::VIA::flush() {
ay8910->run_for(cycles_since_ay_update_.flush());
ay8910->flush();
}
void Machine::VIA::run_for(const Cycles cycles) {
cycles_since_ay_update_ += cycles;
MOS::MOS6522<VIA>::run_for(cycles);
tape->run_for(cycles);
}
void Machine::VIA::update_ay() {
ay8910->run_for(cycles_since_ay_update_.flush());
ay8910->set_control_lines( (GI::AY38910::ControlLines)((ay_bdir_ ? GI::AY38910::BDIR : 0) | (ay_bc1_ ? GI::AY38910::BC1 : 0) | GI::AY38910::BC2));
}
#pragma mark - TapePlayer
Machine::TapePlayer::TapePlayer() :
Storage::Tape::BinaryTapePlayer(1000000) {}
uint8_t Machine::TapePlayer::get_next_byte(bool fast) {
return (uint8_t)parser_.get_next_byte(get_tape(), fast);
}
#pragma mark - Microdisc
void Machine::microdisc_did_change_paging_flags(class Microdisc *microdisc) {
int flags = microdisc->get_paging_flags();
if(!(flags&Microdisc::PagingFlags::BASICDisable)) {
ram_top_ = 0xbfff;
paged_rom_ = rom_;
} else {
if(flags&Microdisc::PagingFlags::MicrodscDisable) {
ram_top_ = 0xffff;
} else {
ram_top_ = 0xdfff;
paged_rom_ = microdisc_rom_.data();
}
}
}
void Machine::wd1770_did_change_output(WD::WD1770 *wd1770) {
set_interrupt_line();
}
void Machine::set_interrupt_line() {
set_irq_line(
via_.get_interrupt_line() ||
(microdisc_is_enabled_ && microdisc_.get_interrupt_request_line()));
}