mirror of
https://github.com/TomHarte/CLK.git
synced 2024-11-29 12:50:28 +00:00
309 lines
8.7 KiB
C++
309 lines
8.7 KiB
C++
//
|
|
// Dave.cpp
|
|
// Clock Signal
|
|
//
|
|
// Created by Thomas Harte on 22/06/2021.
|
|
// Copyright © 2021 Thomas Harte. All rights reserved.
|
|
//
|
|
|
|
#include "Dave.hpp"
|
|
|
|
using namespace Enterprise::Dave;
|
|
|
|
// MARK: - Audio generator
|
|
|
|
Audio::Audio(Concurrency::DeferringAsyncTaskQueue &audio_queue) :
|
|
audio_queue_(audio_queue) {}
|
|
|
|
void Audio::write(uint16_t address, uint8_t value) {
|
|
address &= 0xf;
|
|
audio_queue_.defer([address, value, this] {
|
|
switch(address) {
|
|
case 0: case 2: case 4:
|
|
channels_[address >> 1].reload = (channels_[address >> 1].reload & 0xff00) | value;
|
|
break;
|
|
case 1: case 3: case 5:
|
|
channels_[address >> 1].reload = uint16_t((channels_[address >> 1].reload & 0x00ff) | ((value & 0xf) << 8));
|
|
channels_[address >> 1].distortion = Channel::Distortion((value >> 4)&3);
|
|
channels_[address >> 1].high_pass = value & 0x40;
|
|
channels_[address >> 1].ring_modulate = value & 0x80;
|
|
break;
|
|
case 6:
|
|
noise_.frequency = Noise::Frequency(value&3);
|
|
noise_.polynomial = Noise::Polynomial((value >> 2)&3);
|
|
noise_.swap_polynomial = value & 0x10;
|
|
noise_.low_pass = value & 0x20;
|
|
noise_.high_pass = value & 0x40;
|
|
noise_.ring_modulate = value & 0x80;
|
|
break;
|
|
|
|
case 7:
|
|
channels_[0].sync = value & 0x01;
|
|
channels_[1].sync = value & 0x02;
|
|
channels_[2].sync = value & 0x04;
|
|
use_direct_output_[0] = value & 0x08;
|
|
use_direct_output_[1] = value & 0x10;
|
|
// Interrupt bits are handled separately.
|
|
break;
|
|
|
|
case 8: case 9: case 10:
|
|
channels_[address - 8].amplitude[0] = value & 0x3f;
|
|
break;
|
|
case 12: case 13: case 14:
|
|
channels_[address - 12].amplitude[1] = value & 0x3f;
|
|
break;
|
|
case 11: noise_.amplitude[0] = value & 0x3f; break;
|
|
case 15: noise_.amplitude[1] = value & 0x3f; break;
|
|
}
|
|
});
|
|
}
|
|
|
|
void Audio::set_sample_volume_range(int16_t range) {
|
|
audio_queue_.defer([range, this] {
|
|
volume_ = range / (63*4);
|
|
});
|
|
}
|
|
|
|
void Audio::update_channel(int c) {
|
|
if(channels_[c].sync) {
|
|
channels_[c].count = channels_[c].reload;
|
|
channels_[c].output <<= 1;
|
|
return;
|
|
}
|
|
|
|
auto output = channels_[c].output & 1;
|
|
channels_[c].output <<= 1;
|
|
if(!channels_[c].count) {
|
|
channels_[c].count = channels_[c].reload;
|
|
|
|
if(channels_[c].distortion == Channel::Distortion::None)
|
|
output ^= 1;
|
|
else
|
|
output = poly_state_[int(channels_[c].distortion)];
|
|
|
|
if(channels_[c].high_pass && (channels_[(c+1)%3].output&3) == 2) {
|
|
output = 0;
|
|
}
|
|
if(channels_[c].ring_modulate) {
|
|
output = ~(output ^ channels_[(c+2)%3].output) & 1;
|
|
}
|
|
} else {
|
|
--channels_[c].count;
|
|
}
|
|
|
|
channels_[c].output |= output;
|
|
}
|
|
|
|
void Audio::get_samples(std::size_t number_of_samples, int16_t *target) {
|
|
for(size_t c = 0; c < number_of_samples; c++) {
|
|
poly_state_[int(Channel::Distortion::FourBit)] = poly4_.next();
|
|
poly_state_[int(Channel::Distortion::FiveBit)] = poly5_.next();
|
|
poly_state_[int(Channel::Distortion::SevenBit)] = poly7_.next();
|
|
if(noise_.swap_polynomial) {
|
|
poly_state_[int(Channel::Distortion::SevenBit)] = poly_state_[int(Channel::Distortion::None)];
|
|
}
|
|
|
|
// Update tone channels.
|
|
update_channel(0);
|
|
update_channel(1);
|
|
update_channel(2);
|
|
|
|
// Update noise channel.
|
|
|
|
// Step 1: decide whether there is a tick to apply.
|
|
bool noise_tick = false;
|
|
if(noise_.frequency == Noise::Frequency::DivideByFour) {
|
|
if(!noise_.count) {
|
|
noise_tick = true;
|
|
noise_.count = 3;
|
|
} else {
|
|
--noise_.count;
|
|
}
|
|
} else {
|
|
noise_tick = (channels_[int(noise_.frequency) - 1].output&3) == 2;
|
|
}
|
|
|
|
// Step 2: tick if necessary.
|
|
if(noise_tick) {
|
|
switch(noise_.polynomial) {
|
|
case Noise::Polynomial::SeventeenBit:
|
|
poly_state_[int(Channel::Distortion::None)] = uint8_t(poly17_.next());
|
|
break;
|
|
case Noise::Polynomial::FifteenBit:
|
|
poly_state_[int(Channel::Distortion::None)] = uint8_t(poly15_.next());
|
|
break;
|
|
case Noise::Polynomial::ElevenBit:
|
|
poly_state_[int(Channel::Distortion::None)] = uint8_t(poly11_.next());
|
|
break;
|
|
case Noise::Polynomial::NineBit:
|
|
poly_state_[int(Channel::Distortion::None)] = uint8_t(poly9_.next());
|
|
break;
|
|
}
|
|
|
|
noise_.output <<= 1;
|
|
noise_.output |= poly_state_[int(Channel::Distortion::None)];
|
|
|
|
// Low pass: sample channel 2 on downward transitions of the prima facie output.
|
|
if(noise_.low_pass) {
|
|
if((noise_.output & 3) == 2) {
|
|
noise_.output = (noise_.output & ~1) | (channels_[2].output & 1);
|
|
} else {
|
|
noise_.output = (noise_.output & ~1) | (noise_.output & 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Apply noise high-pass at the rate of the tone channels.
|
|
if(noise_.high_pass && (channels_[0].output & 3) == 2) {
|
|
noise_.output &= ~1;
|
|
}
|
|
|
|
// Update noise ring modulation, if any.
|
|
if(noise_.ring_modulate) {
|
|
noise_.final_output = !((noise_.output ^ channels_[1].output) & 1);
|
|
} else {
|
|
noise_.final_output = noise_.output & 1;
|
|
}
|
|
|
|
// I'm unclear on the details of the time division multiplexing so,
|
|
// for now, just sum the outputs.
|
|
target[(c << 1) + 0] =
|
|
volume_ *
|
|
(use_direct_output_[0] ?
|
|
channels_[0].amplitude[0]
|
|
: (
|
|
channels_[0].amplitude[0] * (channels_[0].output & 1) +
|
|
channels_[1].amplitude[0] * (channels_[1].output & 1) +
|
|
channels_[2].amplitude[0] * (channels_[2].output & 1) +
|
|
noise_.amplitude[0] * noise_.final_output
|
|
));
|
|
|
|
target[(c << 1) + 1] =
|
|
volume_ *
|
|
(use_direct_output_[1] ?
|
|
channels_[0].amplitude[1]
|
|
: (
|
|
channels_[0].amplitude[1] * (channels_[0].output & 1) +
|
|
channels_[1].amplitude[1] * (channels_[1].output & 1) +
|
|
channels_[2].amplitude[1] * (channels_[2].output & 1) +
|
|
noise_.amplitude[1] * noise_.final_output
|
|
));
|
|
}
|
|
}
|
|
|
|
// MARK: - Interrupt source
|
|
|
|
uint8_t TimedInterruptSource::get_new_interrupts() {
|
|
const uint8_t result = interrupts_;
|
|
interrupts_ = 0;
|
|
return result;
|
|
}
|
|
|
|
void TimedInterruptSource::write(uint16_t address, uint8_t value) {
|
|
address &= 15;
|
|
switch(address) {
|
|
default: break;
|
|
|
|
case 0: case 2:
|
|
channels_[address >> 1].reload = (channels_[address >> 1].reload & 0xff00) | value;
|
|
break;
|
|
case 1: case 3:
|
|
channels_[address >> 1].reload = uint16_t((channels_[address >> 1].reload & 0x00ff) | ((value & 0xf) << 8));
|
|
break;
|
|
|
|
case 7: {
|
|
channels_[0].sync = value & 0x01;
|
|
channels_[1].sync = value & 0x02;
|
|
|
|
const InterruptRate rate = InterruptRate((value >> 5) & 3);
|
|
if(rate != rate_) {
|
|
rate_ = InterruptRate((value >> 5) & 3);
|
|
|
|
if(rate_ >= InterruptRate::ToneGenerator0) {
|
|
programmable_level_ = channels_[int(rate_) - int(InterruptRate::ToneGenerator0)].level;
|
|
} else {
|
|
// TODO: eliminate copy and paste from below.
|
|
switch(rate_) {
|
|
case InterruptRate::OnekHz: programmable_offset_ = 125; break;
|
|
case InterruptRate::FiftyHz: programmable_offset_ = 2500; break;
|
|
default: break;
|
|
}
|
|
}
|
|
}
|
|
} break;
|
|
}
|
|
}
|
|
|
|
// TODO: don't muck about with update_channel if channels have a reload value of 0.
|
|
|
|
void TimedInterruptSource::update_channel(int c, bool is_linked, int decrement) {
|
|
if(channels_[c].sync) {
|
|
channels_[c].value = channels_[c].reload;
|
|
} else {
|
|
channels_[c].value -= decrement;
|
|
while(channels_[c].value < 0) {
|
|
channels_[c].value += channels_[c].reload + 1;
|
|
|
|
if(is_linked) {
|
|
if(channels_[c].level) {
|
|
interrupts_ |= uint8_t(Interrupt::VariableFrequency);
|
|
}
|
|
programmable_level_ = channels_[c].level;
|
|
}
|
|
channels_[c].level ^= true;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
void TimedInterruptSource::run_for(Cycles cycles) {
|
|
// Update the 1Hz interrupt.
|
|
one_hz_offset_ -= cycles;
|
|
if(one_hz_offset_ <= Cycles(0)) {
|
|
interrupts_ |= uint8_t(Interrupt::OneHz);
|
|
one_hz_offset_ += clock_rate;
|
|
}
|
|
|
|
// Update the two tone channels.
|
|
update_channel(0, rate_ == InterruptRate::ToneGenerator0, cycles.as<int>());
|
|
update_channel(1, rate_ == InterruptRate::ToneGenerator1, cycles.as<int>());
|
|
|
|
// Update the programmable-frequency interrupt.
|
|
if(rate_ < InterruptRate::ToneGenerator0) {
|
|
programmable_offset_ -= cycles.as<int>();
|
|
if(programmable_offset_ <= 0) {
|
|
if(programmable_level_) {
|
|
interrupts_ |= uint8_t(Interrupt::VariableFrequency);
|
|
}
|
|
programmable_level_ ^= true;
|
|
|
|
switch(rate_) {
|
|
case InterruptRate::OnekHz: programmable_offset_ = 125; break;
|
|
case InterruptRate::FiftyHz: programmable_offset_ = 2500; break;
|
|
default: break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
Cycles TimedInterruptSource::get_next_sequence_point() const {
|
|
int result = one_hz_offset_.as<int>();
|
|
|
|
if(rate_ < InterruptRate::ToneGenerator0) {
|
|
result = std::min(result, programmable_offset_);
|
|
}
|
|
|
|
// To match normal tone generator logic: the tone generators will
|
|
// generate activity when they underflow, not when they hits zero.
|
|
result = std::min(result, channels_[0].value + 1);
|
|
result = std::min(result, channels_[1].value + 1);
|
|
|
|
return Cycles(result);
|
|
}
|
|
|
|
uint8_t TimedInterruptSource::get_divider_state() {
|
|
return
|
|
(one_hz_offset_ < half_clock_rate ? 0x4 : 0x0) |
|
|
(programmable_level_ ? 0x1 : 0x0);
|
|
}
|