CLK/Processors/68000Mk2/Implementation/68000Mk2Storage.hpp

//
//  68000Mk2Storage.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 16/05/2022.
//  Copyright © 2022 Thomas Harte. All rights reserved.
//

#ifndef _8000Mk2Storage_h
#define _8000Mk2Storage_h

#include "../../../InstructionSets/M68k/Decoder.hpp"
#include "../../../InstructionSets/M68k/Perform.hpp"
#include "../../../InstructionSets/M68k/Status.hpp"

#include <limits>

namespace CPU {
namespace MC68000Mk2 {

struct ProcessorBase: public InstructionSet::M68k::NullFlowController {
	ProcessorBase() {
		read_program_announce.address = read_program.address = &program_counter_.l;
	}

	int state_ = std::numeric_limits<int>::min();

	/// Counts time left on the clock before the current batch of processing
	/// is complete; may be less than zero.
	HalfCycles time_remaining_;

	/// Current supervisor state, for direct provision to the bus handler.
	int is_supervisor_ = 1;

	// A decoder for instructions, plus all collected information about the
	// current instruction.
	InstructionSet::M68k::Predecoder<InstructionSet::M68k::Model::M68000> decoder_;
	InstructionSet::M68k::Preinstruction instruction_;
	uint16_t opcode_;
	uint8_t operand_flags_;
	SlicedInt32 instruction_address_;

	// Register state.
	InstructionSet::M68k::Status status_;
	SlicedInt32 program_counter_;
	SlicedInt32 registers_[16];		// D0–D7 followed by A0–A7.
	SlicedInt32 stack_pointers_[2];

	/// Current state of the DTACK input.
	bool dtack_ = false;
	/// Current state of the VPA input.
	bool vpa_ = false;
	/// Current state of the BERR input.
	bool berr_ = false;

	/// Contains the prefetch queue; the most-recently fetched thing is the
	/// low portion of this word, and the thing fetched before that has
	/// proceeded to the high portion.
	SlicedInt32 prefetch_;

	// Temporary storage for the current instruction's operands
	// and the corresponding effective addresses.
	CPU::SlicedInt32 operand_[2];
	CPU::SlicedInt32 effective_address_[2];

	/// If currently in the wait-for-DTACK state, this indicates where to go
	/// upon receipt of DTACK or VPA. BERR will automatically segue
	/// into the proper exception.
	int post_dtack_state_ = 0;

	/// If using CalcEffectiveAddress, this is the state to adopt after the
	/// effective address for next_operand_ has been calculated.
	int post_ea_state_ = 0;

	/// The perform state for this operation.
	int perform_state_ = 0;

	/// When fetching or storing operands, this is the next one to fetch
	/// or store.
	int next_operand_ = 0;

	/// Storage for a temporary address, which can't be a local because it'll
	/// be used to populate microcycles, which may persist beyond an entry
	/// and exit of run_for (especially between an address announcement, and
	/// a data select).
	SlicedInt32 temporary_address_;

	/// Storage for a temporary value; primarily used by MOVEP to split a 32-bit
	/// source into bus-compatible byte units.
	SlicedInt32 temporary_value_;

	/// A record of the exception to trigger.
	int exception_vector_ = 0;

	/// Transient storage for exception processing.
	SlicedInt16 captured_status_;

	/// An internal flag used during various dynamically-sized instructions
	/// (e.g. BCHG, DIVU) to indicate how much additional processing happened;
	/// this is measured in microcycles.
	int dynamic_instruction_length_ = 0;

	/// Two bits of state for MOVEM, being the curent register and what to
	/// add to it to get to the next register.
	int register_index_ = 0, register_delta_ = 0;

	// A lookup table that aids with effective address calculation in
	// predecrement and postincrement modes; index as [size][register]
	// and note that [0][7] is 2 rather than 1.
	static constexpr uint32_t address_increments[3][8] = {
		{ 1, 1, 1, 1, 1, 1, 1, 2, },
		{ 2, 2, 2, 2, 2, 2, 2, 2, },
		{ 4, 4, 4, 4, 4, 4, 4, 4, },
	};
	static_assert(int(InstructionSet::M68k::DataSize::Byte) == 0);
	static_assert(int(InstructionSet::M68k::DataSize::Word) == 1);
	static_assert(int(InstructionSet::M68k::DataSize::LongWord) == 2);

	/// Used by some dedicated read-modify-write perform patterns to
	/// determine the size of the bus operation.
	Microcycle::OperationT select_flag_ = 0;

	// Flow controller... many TODO.
	using Preinstruction = InstructionSet::M68k::Preinstruction;
	template <typename IntT> void did_mulu(IntT);
	template <typename IntT> void did_muls(IntT);
	inline void did_chk(bool, bool);
	inline void did_scc(bool);
	inline void did_shift(int) {}						//
	template <bool did_overflow> void did_divu(uint32_t, uint32_t);
	template <bool did_overflow> void did_divs(int32_t, int32_t);
	inline void did_bit_op(int);
	inline void did_update_status();
	template <typename IntT> void complete_bcc(bool, IntT);
	inline void complete_dbcc(bool, bool, int16_t);
	inline void bsr(uint32_t);
	inline void rtr() {}			//
	inline void rte() {}			//
	inline void rts() {}			//
	inline void stop() {}			//
	inline void reset() {}			//
	inline void link(Preinstruction, uint32_t) {}	//
	inline void unlink(uint32_t &) {}				//
	inline void move_to_usp(uint32_t) {}			//
	inline void move_from_usp(uint32_t &) {}		//
	inline void tas(Preinstruction, uint32_t);
	template <bool use_current_instruction_pc = true> void raise_exception(int);

	// These aren't implemented because the specific details of the implementation
	// mean that the performer call-out isn't necessary.
	template <typename IntT> void movep(Preinstruction, uint32_t, uint32_t) {}
	template <typename IntT> void movem_toM(Preinstruction, uint32_t, uint32_t) {}
	template <typename IntT> void movem_toR(Preinstruction, uint32_t, uint32_t) {}
	void jsr(uint32_t) {}
	void jmp(uint32_t) {}
	inline void pea(uint32_t) {}

	// Some microcycles that will be modified as required and used in the main loop;
	// the semantics of a switch statement make in-place declarations awkward and
	// some of these may persist across multiple calls to run_for.
	Microcycle idle{0};

	// Read a program word. All accesses via the program counter are word sized.
	Microcycle read_program_announce {
		Microcycle::Read | Microcycle::NewAddress | Microcycle::IsProgram
	};
	Microcycle read_program {
		Microcycle::Read | Microcycle::SameAddress | Microcycle::SelectWord | Microcycle::IsProgram
	};

	// Read a data word or byte.
	Microcycle access_announce {
		Microcycle::Read | Microcycle::NewAddress | Microcycle::IsData
	};
	Microcycle access {
		Microcycle::Read | Microcycle::SameAddress | Microcycle::SelectWord | Microcycle::IsData
	};

	// TAS.
	Microcycle tas_cycles[5] = {
		{ Microcycle::Read | Microcycle::NewAddress | Microcycle::IsData },
		{ Microcycle::Read | Microcycle::SameAddress | Microcycle::IsData | Microcycle::SelectByte },
		{ Microcycle::SameAddress },
		{ Microcycle::SameAddress | Microcycle::IsData },
		{ Microcycle::SameAddress | Microcycle::IsData | Microcycle::SelectByte },
	};

	// Holding spot when awaiting DTACK/etc.
	Microcycle awaiting_dtack;
};

}
}

#endif /* _8000Mk2Storage_h */