mirror of
https://github.com/MoleskiCoder/EightBit.git
synced 2024-12-26 03:32:51 +00:00
2756 lines
74 KiB
Plaintext
2756 lines
74 KiB
Plaintext
;
|
|
; 6 5 C 0 2 E X T E N D E D O P C O D E S T E S T
|
|
;
|
|
; Copyright (C) 2013-2017 Klaus Dormann
|
|
;
|
|
; This program is free software: you can redistribute it and/or modify
|
|
; it under the terms of the GNU General Public License as published by
|
|
; the Free Software Foundation, either version 3 of the License, or
|
|
; (at your option) any later version.
|
|
;
|
|
; This program is distributed in the hope that it will be useful,
|
|
; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
; GNU General Public License for more details.
|
|
;
|
|
; You should have received a copy of the GNU General Public License
|
|
; along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
; This program is designed to test all additional 65C02 opcodes, addressing
|
|
; modes and functionality not available in the NMOS version of the 6502.
|
|
; The 6502_functional_test is a prerequisite to this test.
|
|
; NMI, IRQ, BRK, STP & WAI are covered in the 6502_interrupt_test.
|
|
;
|
|
; version 09-feb-2017
|
|
; contact info at http://2m5.de or email K@2m5.de
|
|
;
|
|
; assembled with AS65 from http://www.kingswood-consulting.co.uk/assemblers/
|
|
; command line switches: -l -m -s2 -w -x -h0
|
|
; | | | | | no page headers in listing
|
|
; | | | | 65C02 extensions
|
|
; | | | wide listing (133 char/col)
|
|
; | | write intel hex file instead of binary
|
|
; | expand macros in listing
|
|
; generate pass2 listing
|
|
;
|
|
; No IO - should be run from a monitor with access to registers.
|
|
; To run load intel hex image with a load command, than alter PC to 400 hex
|
|
; (code_segment) and enter a go command.
|
|
; Loop on program counter determines error or successful completion of test.
|
|
; Check listing for relevant traps (jump/branch *).
|
|
; Please note that in early tests some instructions will have to be used before
|
|
; they are actually tested!
|
|
;
|
|
; RESET, NMI or IRQ should not occur and will be trapped if vectors are enabled.
|
|
; Tests documented behavior of the original 65C02 only!
|
|
; Decimal ops will only be tested with valid BCD operands and the V flag will
|
|
; be ignored as it is absolutely useless in decimal mode.
|
|
;
|
|
; Debugging hints:
|
|
; Most of the code is written sequentially. if you hit a trap, check the
|
|
; immediately preceeding code for the instruction to be tested. Results are
|
|
; tested first, flags are checked second by pushing them onto the stack and
|
|
; pulling them to the accumulator after the result was checked. The "real"
|
|
; flags are no longer valid for the tested instruction at this time!
|
|
; If the tested instruction was indexed, the relevant index (X or Y) must
|
|
; also be checked. Opposed to the flags, X and Y registers are still valid.
|
|
;
|
|
; versions:
|
|
; 19-jul-2013 1st version distributed for testing
|
|
; 23-jul-2013 fixed BRA out of range due to larger trap macros
|
|
; added RAM integrity check
|
|
; 16-aug-2013 added error report to standard output option
|
|
; 23-aug-2015 change revoked
|
|
; 24-aug-2015 all self modifying immediate opcodes now execute in data RAM
|
|
; 28-aug-2015 fixed decimal adc/sbc immediate only testing carry
|
|
; 09-feb-2017 fixed RMB/SMB tested when they shouldn't be tested
|
|
|
|
|
|
; C O N F I G U R A T I O N
|
|
|
|
;ROM_vectors writable (0=no, 1=yes)
|
|
;if ROM vectors can not be used interrupts will not be trapped
|
|
;as a consequence BRK can not be tested but will be emulated to test RTI
|
|
ROM_vectors = 1
|
|
|
|
;load_data_direct (0=move from code segment, 1=load directly)
|
|
;loading directly is preferred but may not be supported by your platform
|
|
;0 produces only consecutive object code, 1 is not suitable for a binary image
|
|
load_data_direct = 1
|
|
|
|
;I_flag behavior (0=force enabled, 1=force disabled, 2=prohibit change, 3=allow
|
|
;change) 2 requires extra code and is not recommended.
|
|
I_flag = 3
|
|
|
|
;configure memory - try to stay away from memory used by the system
|
|
;zero_page memory start address, $4e (78) consecutive Bytes required
|
|
; add 2 if I_flag = 2
|
|
zero_page = $a
|
|
|
|
;data_segment memory start address, $63 (99) consecutive Bytes required
|
|
; + 12 Bytes at data_segment + $f9 (JMP indirect page cross test)
|
|
data_segment = $200
|
|
if (data_segment & $ff) != 0
|
|
ERROR ERROR ERROR low byte of data_segment MUST be $00 !!
|
|
endif
|
|
|
|
;code_segment memory start address, 10kB of consecutive space required
|
|
; add 1 kB if I_flag = 2
|
|
code_segment = $400
|
|
|
|
;added WDC only opcodes WAI & STP (0=test as NOPs, >0=no test)
|
|
wdc_op = 1
|
|
|
|
;added Rockwell & WDC opcodes BBR, BBS, RMB & SMB
|
|
;(0=test as NOPs, 1=full test, >1=no test)
|
|
rkwl_wdc_op = 1
|
|
|
|
;report errors through I/O channel (0=use standard self trap loops, 1=include
|
|
;report.i65 as I/O channel, add 3 kB)
|
|
report = 0
|
|
|
|
;RAM integrity test option. Checks for undesired RAM writes.
|
|
;set lowest non RAM or RAM mirror address page (-1=disable, 0=64k, $40=16k)
|
|
;leave disabled if a monitor, OS or background interrupt is allowed to alter RAM
|
|
ram_top = -1
|
|
|
|
noopt ;do not take shortcuts
|
|
|
|
;macros for error & success traps to allow user modification
|
|
;example:
|
|
;trap macro
|
|
; jsr my_error_handler
|
|
; endm
|
|
;trap_eq macro
|
|
; bne skip\?
|
|
; trap ;failed equal (zero)
|
|
;skip\?
|
|
; endm
|
|
;
|
|
; my_error_handler should pop the calling address from the stack and report it.
|
|
; putting larger portions of code (more than 3 bytes) inside the trap macro
|
|
; may lead to branch range problems for some tests.
|
|
if report = 0
|
|
trap macro
|
|
jmp * ;failed anyway
|
|
endm
|
|
trap_eq macro
|
|
beq * ;failed equal (zero)
|
|
endm
|
|
trap_ne macro
|
|
bne * ;failed not equal (non zero)
|
|
endm
|
|
trap_cs macro
|
|
bcs * ;failed carry set
|
|
endm
|
|
trap_cc macro
|
|
bcc * ;failed carry clear
|
|
endm
|
|
trap_mi macro
|
|
bmi * ;failed minus (bit 7 set)
|
|
endm
|
|
trap_pl macro
|
|
bpl * ;failed plus (bit 7 clear)
|
|
endm
|
|
trap_vs macro
|
|
bvs * ;failed overflow set
|
|
endm
|
|
trap_vc macro
|
|
bvc * ;failed overflow clear
|
|
endm
|
|
; please observe that during the test the stack gets invalidated
|
|
; therefore a RTS inside the success macro is not possible
|
|
success macro
|
|
jmp * ;test passed, no errors
|
|
endm
|
|
endif
|
|
if report = 1
|
|
trap macro
|
|
jsr report_error
|
|
endm
|
|
trap_eq macro
|
|
bne skip\?
|
|
trap ;failed equal (zero)
|
|
skip\?
|
|
endm
|
|
trap_ne macro
|
|
beq skip\?
|
|
trap ;failed not equal (non zero)
|
|
skip\?
|
|
endm
|
|
trap_cs macro
|
|
bcc skip\?
|
|
trap ;failed carry set
|
|
skip\?
|
|
endm
|
|
trap_cc macro
|
|
bcs skip\?
|
|
trap ;failed carry clear
|
|
skip\?
|
|
endm
|
|
trap_mi macro
|
|
bpl skip\?
|
|
trap ;failed minus (bit 7 set)
|
|
skip\?
|
|
endm
|
|
trap_pl macro
|
|
bmi skip\?
|
|
trap ;failed plus (bit 7 clear)
|
|
skip\?
|
|
endm
|
|
trap_vs macro
|
|
bvc skip\?
|
|
trap ;failed overflow set
|
|
skip\?
|
|
endm
|
|
trap_vc macro
|
|
bvs skip\?
|
|
trap ;failed overflow clear
|
|
skip\?
|
|
endm
|
|
; please observe that during the test the stack gets invalidated
|
|
; therefore a RTS inside the success macro is not possible
|
|
success macro
|
|
jsr report_success
|
|
endm
|
|
endif
|
|
|
|
|
|
carry equ %00000001 ;flag bits in status
|
|
zero equ %00000010
|
|
intdis equ %00000100
|
|
decmode equ %00001000
|
|
break equ %00010000
|
|
reserv equ %00100000
|
|
overfl equ %01000000
|
|
minus equ %10000000
|
|
|
|
fc equ carry
|
|
fz equ zero
|
|
fzc equ carry+zero
|
|
fv equ overfl
|
|
fvz equ overfl+zero
|
|
fn equ minus
|
|
fnc equ minus+carry
|
|
fnz equ minus+zero
|
|
fnzc equ minus+zero+carry
|
|
fnv equ minus+overfl
|
|
|
|
fao equ break+reserv ;bits always on after PHP, BRK
|
|
fai equ fao+intdis ;+ forced interrupt disable
|
|
m8 equ $ff ;8 bit mask
|
|
m8i equ $ff&~intdis ;8 bit mask - interrupt disable
|
|
|
|
;macros to allow masking of status bits.
|
|
;masking of interrupt enable/disable on load and compare
|
|
;masking of always on bits after PHP or BRK (unused & break) on compare
|
|
if I_flag = 0
|
|
load_flag macro
|
|
lda #\1&m8i ;force enable interrupts (mask I)
|
|
endm
|
|
cmp_flag macro
|
|
cmp #(\1|fao)&m8i ;I_flag is always enabled + always on bits
|
|
endm
|
|
eor_flag macro
|
|
eor #(\1&m8i|fao) ;mask I, invert expected flags + always on bits
|
|
endm
|
|
endif
|
|
if I_flag = 1
|
|
load_flag macro
|
|
lda #\1|intdis ;force disable interrupts
|
|
endm
|
|
cmp_flag macro
|
|
cmp #(\1|fai)&m8 ;I_flag is always disabled + always on bits
|
|
endm
|
|
eor_flag macro
|
|
eor #(\1|fai) ;invert expected flags + always on bits + I
|
|
endm
|
|
endif
|
|
if I_flag = 2
|
|
load_flag macro
|
|
lda #\1
|
|
ora flag_I_on ;restore I-flag
|
|
and flag_I_off
|
|
endm
|
|
cmp_flag macro
|
|
eor flag_I_on ;I_flag is never changed
|
|
cmp #(\1|fao)&m8i ;expected flags + always on bits, mask I
|
|
endm
|
|
eor_flag macro
|
|
eor flag_I_on ;I_flag is never changed
|
|
eor #(\1&m8i|fao) ;mask I, invert expected flags + always on bits
|
|
endm
|
|
endif
|
|
if I_flag = 3
|
|
load_flag macro
|
|
lda #\1 ;allow test to change I-flag (no mask)
|
|
endm
|
|
cmp_flag macro
|
|
cmp #(\1|fao)&m8 ;expected flags + always on bits
|
|
endm
|
|
eor_flag macro
|
|
eor #\1|fao ;invert expected flags + always on bits
|
|
endm
|
|
endif
|
|
|
|
;macros to set (register|memory|zeropage) & status
|
|
set_stat macro ;setting flags in the processor status register
|
|
load_flag \1
|
|
pha ;use stack to load status
|
|
plp
|
|
endm
|
|
|
|
set_a macro ;precharging accu & status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda #\1 ;precharge accu
|
|
plp
|
|
endm
|
|
|
|
set_x macro ;precharging index & status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
ldx #\1 ;precharge index x
|
|
plp
|
|
endm
|
|
|
|
set_y macro ;precharging index & status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
ldy #\1 ;precharge index y
|
|
plp
|
|
endm
|
|
|
|
set_ax macro ;precharging indexed accu & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,x ;precharge accu
|
|
plp
|
|
endm
|
|
|
|
set_ay macro ;precharging indexed accu & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,y ;precharge accu
|
|
plp
|
|
endm
|
|
|
|
set_z macro ;precharging indexed zp & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,x ;load to zeropage
|
|
sta zpt
|
|
plp
|
|
endm
|
|
|
|
set_zx macro ;precharging zp,x & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,x ;load to indexed zeropage
|
|
sta zpt,x
|
|
plp
|
|
endm
|
|
|
|
set_abs macro ;precharging indexed memory & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,x ;load to memory
|
|
sta abst
|
|
plp
|
|
endm
|
|
|
|
set_absx macro ;precharging abs,x & immediate status
|
|
load_flag \2
|
|
pha ;use stack to load status
|
|
lda \1,x ;load to indexed memory
|
|
sta abst,x
|
|
plp
|
|
endm
|
|
|
|
;macros to test (register|memory|zeropage) & status & (mask)
|
|
tst_stat macro ;testing flags in the processor status register
|
|
php ;save status
|
|
pla ;use stack to retrieve status
|
|
pha
|
|
cmp_flag \1
|
|
trap_ne
|
|
plp ;restore status
|
|
endm
|
|
|
|
tst_a macro ;testing result in accu & flags
|
|
php ;save flags
|
|
cmp #\1 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
pha
|
|
cmp_flag \2
|
|
trap_ne
|
|
plp ;restore status
|
|
endm
|
|
|
|
tst_as macro ;testing result in accu & flags, save accu
|
|
pha
|
|
php ;save flags
|
|
cmp #\1 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
pha
|
|
cmp_flag \2
|
|
trap_ne
|
|
plp ;restore status
|
|
pla
|
|
endm
|
|
|
|
tst_x macro ;testing result in x index & flags
|
|
php ;save flags
|
|
cpx #\1 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
pha
|
|
cmp_flag \2
|
|
trap_ne
|
|
plp ;restore status
|
|
endm
|
|
|
|
tst_y macro ;testing result in y index & flags
|
|
php ;save flags
|
|
cpy #\1 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
pha
|
|
cmp_flag \2
|
|
trap_ne
|
|
plp ;restore status
|
|
endm
|
|
|
|
tst_ax macro ;indexed testing result in accu & flags
|
|
php ;save flags
|
|
cmp \1,x ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,x ;test flags
|
|
trap_ne ;
|
|
endm
|
|
|
|
tst_ay macro ;indexed testing result in accu & flags
|
|
php ;save flags
|
|
cmp \1,y ;test result
|
|
trap_ne ;
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,y ;test flags
|
|
trap_ne
|
|
endm
|
|
|
|
tst_z macro ;indexed testing result in zp & flags
|
|
php ;save flags
|
|
lda zpt
|
|
cmp \1,x ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,x ;test flags
|
|
trap_ne
|
|
endm
|
|
|
|
tst_zx macro ;testing result in zp,x & flags
|
|
php ;save flags
|
|
lda zpt,x
|
|
cmp \1,x ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,x ;test flags
|
|
trap_ne
|
|
endm
|
|
|
|
tst_abs macro ;indexed testing result in memory & flags
|
|
php ;save flags
|
|
lda abst
|
|
cmp \1,x ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,x ;test flags
|
|
trap_ne
|
|
endm
|
|
|
|
tst_absx macro ;testing result in abs,x & flags
|
|
php ;save flags
|
|
lda abst,x
|
|
cmp \1,x ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag \3
|
|
cmp \2,x ;test flags
|
|
trap_ne
|
|
endm
|
|
|
|
; RAM integrity test
|
|
; verifies that none of the previous tests has altered RAM outside of the
|
|
; designated write areas.
|
|
; uses zpt word as indirect pointer, zpt+2 word as checksum
|
|
if ram_top > -1
|
|
check_ram macro
|
|
cld
|
|
lda #0
|
|
sta zpt ;set low byte of indirect pointer
|
|
sta zpt+3 ;checksum high byte
|
|
ldx #11 ;reset modifiable RAM
|
|
ccs1\? sta jxi_tab,x ;JMP indirect page cross area
|
|
dex
|
|
bpl ccs1\?
|
|
clc
|
|
ldx #zp_bss-zero_page ;zeropage - write test area
|
|
ccs3\? adc zero_page,x
|
|
bcc ccs2\?
|
|
inc zpt+3 ;carry to high byte
|
|
clc
|
|
ccs2\? inx
|
|
bne ccs3\?
|
|
ldx #hi(abs1) ;set high byte of indirect pointer
|
|
stx zpt+1
|
|
ldy #lo(abs1) ;data after write & execute test area
|
|
ccs5\? adc (zpt),y
|
|
bcc ccs4\?
|
|
inc zpt+3 ;carry to high byte
|
|
clc
|
|
ccs4\? iny
|
|
bne ccs5\?
|
|
inx ;advance RAM high address
|
|
stx zpt+1
|
|
cpx #ram_top
|
|
bne ccs5\?
|
|
sta zpt+2 ;checksum low is
|
|
cmp ram_chksm ;checksum low expected
|
|
trap_ne ;checksum mismatch
|
|
lda zpt+3 ;checksum high is
|
|
cmp ram_chksm+1 ;checksum high expected
|
|
trap_ne ;checksum mismatch
|
|
endm
|
|
else
|
|
check_ram macro
|
|
;RAM check disabled - RAM size not set
|
|
endm
|
|
endif
|
|
|
|
next_test macro ;make sure, tests don't jump the fence
|
|
lda test_case ;previous test
|
|
cmp #test_num
|
|
trap_ne ;test is out of sequence
|
|
test_num = test_num + 1
|
|
lda #test_num ;*** next tests' number
|
|
sta test_case
|
|
;check_ram ;uncomment to find altered RAM after each test
|
|
endm
|
|
|
|
if load_data_direct = 1
|
|
data
|
|
else
|
|
bss ;uninitialized segment, copy of data at end of code!
|
|
endif
|
|
org zero_page
|
|
if I_flag = 2
|
|
;masking for I bit in status
|
|
flag_I_on ds 1 ;or mask to load flags
|
|
flag_I_off ds 1 ;and mask to load flags
|
|
endif
|
|
zpt ;5 bytes store/modify test area
|
|
;add/subtract operand generation and result/flag prediction
|
|
adfc ds 1 ;carry flag before op
|
|
ad1 ds 1 ;operand 1 - accumulator
|
|
ad2 ds 1 ;operand 2 - memory / immediate
|
|
adrl ds 1 ;expected result bits 0-7
|
|
adrh ds 1 ;expected result bit 8 (carry)
|
|
adrf ds 1 ;expected flags NV0000ZC (-V in decimal mode)
|
|
sb2 ds 1 ;operand 2 complemented for subtract
|
|
zp_bss
|
|
zp1 db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
|
|
zp7f db $7f ;test pattern for compare
|
|
;logical zeropage operands
|
|
zpOR db 0,$1f,$71,$80 ;test pattern for OR
|
|
zpAN db $0f,$ff,$7f,$80 ;test pattern for AND
|
|
zpEO db $ff,$0f,$8f,$8f ;test pattern for EOR
|
|
;indirect addressing pointers
|
|
ind1 dw abs1 ;indirect pointer to pattern in absolute memory
|
|
dw abs1+1
|
|
dw abs1+2
|
|
dw abs1+3
|
|
dw abs7f
|
|
inw1 dw abs1-$f8 ;indirect pointer for wrap-test pattern
|
|
indt dw abst ;indirect pointer to store area in absolute memory
|
|
dw abst+1
|
|
dw abst+2
|
|
dw abst+3
|
|
inwt dw abst-$f8 ;indirect pointer for wrap-test store
|
|
indAN dw absAN ;indirect pointer to AND pattern in absolute memory
|
|
dw absAN+1
|
|
dw absAN+2
|
|
dw absAN+3
|
|
indEO dw absEO ;indirect pointer to EOR pattern in absolute memory
|
|
dw absEO+1
|
|
dw absEO+2
|
|
dw absEO+3
|
|
indOR dw absOR ;indirect pointer to OR pattern in absolute memory
|
|
dw absOR+1
|
|
dw absOR+2
|
|
dw absOR+3
|
|
;add/subtract indirect pointers
|
|
adi2 dw ada2 ;indirect pointer to operand 2 in absolute memory
|
|
sbi2 dw sba2 ;indirect pointer to complemented operand 2 (SBC)
|
|
adiy2 dw ada2-$ff ;with offset for indirect indexed
|
|
sbiy2 dw sba2-$ff
|
|
zp_bss_end
|
|
|
|
org data_segment
|
|
pg_x ds 2 ;high JMP indirect address for page cross bug
|
|
test_case ds 1 ;current test number
|
|
ram_chksm ds 2 ;checksum for RAM integrity test
|
|
;add/subtract operand copy - abs tests write area
|
|
abst ;5 bytes store/modify test area
|
|
ada2 ds 1 ;operand 2
|
|
sba2 ds 1 ;operand 2 complemented for subtract
|
|
ds 3 ;fill remaining bytes
|
|
data_bss
|
|
if load_data_direct = 1
|
|
ex_adci adc #0 ;execute immediate opcodes
|
|
rts
|
|
ex_sbci sbc #0 ;execute immediate opcodes
|
|
rts
|
|
else
|
|
ex_adci ds 3
|
|
ex_sbci ds 3
|
|
endif
|
|
abs1 db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
|
|
abs7f db $7f ;test pattern for compare
|
|
;loads
|
|
fLDx db fn,fn,0,fz ;expected flags for load
|
|
;shifts
|
|
rASL ;expected result ASL & ROL -carry
|
|
rROL db $86,$04,$82,0 ; "
|
|
rROLc db $87,$05,$83,1 ;expected result ROL +carry
|
|
rLSR ;expected result LSR & ROR -carry
|
|
rROR db $61,$41,$20,0 ; "
|
|
rRORc db $e1,$c1,$a0,$80 ;expected result ROR +carry
|
|
fASL ;expected flags for shifts
|
|
fROL db fnc,fc,fn,fz ;no carry in
|
|
fROLc db fnc,fc,fn,0 ;carry in
|
|
fLSR
|
|
fROR db fc,0,fc,fz ;no carry in
|
|
fRORc db fnc,fn,fnc,fn ;carry in
|
|
;increments (decrements)
|
|
rINC db $7f,$80,$ff,0,1 ;expected result for INC/DEC
|
|
fINC db 0,fn,fn,fz,0 ;expected flags for INC/DEC
|
|
;logical memory operand
|
|
absOR db 0,$1f,$71,$80 ;test pattern for OR
|
|
absAN db $0f,$ff,$7f,$80 ;test pattern for AND
|
|
absEO db $ff,$0f,$8f,$8f ;test pattern for EOR
|
|
;logical accu operand
|
|
absORa db 0,$f1,$1f,0 ;test pattern for OR
|
|
absANa db $f0,$ff,$ff,$ff ;test pattern for AND
|
|
absEOa db $ff,$f0,$f0,$0f ;test pattern for EOR
|
|
;logical results
|
|
absrlo db 0,$ff,$7f,$80
|
|
absflo db fz,fn,0,fn
|
|
data_bss_end
|
|
;define area for page crossing JMP (abs) & JMP (abs,x) test
|
|
jxi_tab equ data_segment + $100 - 7 ;JMP (jxi_tab,x) x=6
|
|
ji_tab equ data_segment + $100 - 3 ;JMP (ji_tab+2)
|
|
jxp_tab equ data_segment + $100 ;JMP (jxp_tab-255) x=255
|
|
|
|
|
|
code
|
|
org code_segment
|
|
start cld
|
|
ldx #$ff
|
|
txs
|
|
lda #0 ;*** test 0 = initialize
|
|
sta test_case
|
|
test_num = 0
|
|
|
|
;stop interrupts before initializing BSS
|
|
if I_flag = 1
|
|
sei
|
|
endif
|
|
|
|
;initialize I/O for report channel
|
|
if report = 1
|
|
jsr report_init
|
|
endif
|
|
|
|
;initialize BSS segment
|
|
if load_data_direct != 1
|
|
ldx #zp_end-zp_init-1
|
|
ld_zp lda zp_init,x
|
|
sta zp_bss,x
|
|
dex
|
|
bpl ld_zp
|
|
ldx #data_end-data_init-1
|
|
ld_data lda data_init,x
|
|
sta data_bss,x
|
|
dex
|
|
bpl ld_data
|
|
if ROM_vectors = 1
|
|
ldx #5
|
|
ld_vect lda vec_init,x
|
|
sta vec_bss,x
|
|
dex
|
|
bpl ld_vect
|
|
endif
|
|
endif
|
|
|
|
;retain status of interrupt flag
|
|
if I_flag = 2
|
|
php
|
|
pla
|
|
and #4 ;isolate flag
|
|
sta flag_I_on ;or mask
|
|
eor #lo(~4) ;reverse
|
|
sta flag_I_off ;and mask
|
|
endif
|
|
|
|
;generate checksum for RAM integrity test
|
|
if ram_top > -1
|
|
lda #0
|
|
sta zpt ;set low byte of indirect pointer
|
|
sta ram_chksm+1 ;checksum high byte
|
|
ldx #11 ;reset modifiable RAM
|
|
gcs1 sta jxi_tab,x ;JMP indirect page cross area
|
|
dex
|
|
bpl gcs1
|
|
clc
|
|
ldx #zp_bss-zero_page ;zeropage - write test area
|
|
gcs3 adc zero_page,x
|
|
bcc gcs2
|
|
inc ram_chksm+1 ;carry to high byte
|
|
clc
|
|
gcs2 inx
|
|
bne gcs3
|
|
ldx #hi(abs1) ;set high byte of indirect pointer
|
|
stx zpt+1
|
|
ldy #lo(abs1) ;data after write & execute test area
|
|
gcs5 adc (zpt),y
|
|
bcc gcs4
|
|
inc ram_chksm+1 ;carry to high byte
|
|
clc
|
|
gcs4 iny
|
|
bne gcs5
|
|
inx ;advance RAM high address
|
|
stx zpt+1
|
|
cpx #ram_top
|
|
bne gcs5
|
|
sta ram_chksm ;checksum complete
|
|
endif
|
|
next_test
|
|
|
|
;testing stack operations PHX PHY PLX PLY
|
|
lda #$99 ;protect a
|
|
ldx #$ff ;initialize stack
|
|
txs
|
|
ldx #$55
|
|
phx
|
|
ldx #$aa
|
|
phx
|
|
cpx $1fe ;on stack ?
|
|
trap_ne
|
|
tsx
|
|
cpx #$fd ;sp decremented?
|
|
trap_ne
|
|
ply
|
|
cpy #$aa ;successful retreived from stack?
|
|
trap_ne
|
|
ply
|
|
cpy #$55
|
|
trap_ne
|
|
cpy $1ff ;remains on stack?
|
|
trap_ne
|
|
tsx
|
|
cpx #$ff ;sp incremented?
|
|
trap_ne
|
|
|
|
ldy #$a5
|
|
phy
|
|
ldy #$5a
|
|
phy
|
|
cpy $1fe ;on stack ?
|
|
trap_ne
|
|
tsx
|
|
cpx #$fd ;sp decremented?
|
|
trap_ne
|
|
plx
|
|
cpx #$5a ;successful retreived from stack?
|
|
trap_ne
|
|
plx
|
|
cpx #$a5
|
|
trap_ne
|
|
cpx $1ff ;remains on stack?
|
|
trap_ne
|
|
tsx
|
|
cpx #$ff ;sp incremented?
|
|
trap_ne
|
|
cmp #$99 ;unchanged?
|
|
trap_ne
|
|
next_test
|
|
|
|
; test PHX does not alter flags or X but PLX does
|
|
ldy #$aa ;protect y
|
|
set_x 1,$ff ;push
|
|
phx
|
|
tst_x 1,$ff
|
|
set_x 0,0
|
|
phx
|
|
tst_x 0,0
|
|
set_x $ff,$ff
|
|
phx
|
|
tst_x $ff,$ff
|
|
set_x 1,0
|
|
phx
|
|
tst_x 1,0
|
|
set_x 0,$ff
|
|
phx
|
|
tst_x 0,$ff
|
|
set_x $ff,0
|
|
phx
|
|
tst_x $ff,0
|
|
set_x 0,$ff ;pull
|
|
plx
|
|
tst_x $ff,$ff-zero
|
|
set_x $ff,0
|
|
plx
|
|
tst_x 0,zero
|
|
set_x $fe,$ff
|
|
plx
|
|
tst_x 1,$ff-zero-minus
|
|
set_x 0,0
|
|
plx
|
|
tst_x $ff,minus
|
|
set_x $ff,$ff
|
|
plx
|
|
tst_x 0,$ff-minus
|
|
set_x $fe,0
|
|
plx
|
|
tst_x 1,0
|
|
cpy #$aa ;Y unchanged
|
|
trap_ne
|
|
next_test
|
|
|
|
; test PHY does not alter flags or Y but PLY does
|
|
ldx #$55 ;x & a protected
|
|
set_y 1,$ff ;push
|
|
phy
|
|
tst_y 1,$ff
|
|
set_y 0,0
|
|
phy
|
|
tst_y 0,0
|
|
set_y $ff,$ff
|
|
phy
|
|
tst_y $ff,$ff
|
|
set_y 1,0
|
|
phy
|
|
tst_y 1,0
|
|
set_y 0,$ff
|
|
phy
|
|
tst_y 0,$ff
|
|
set_y $ff,0
|
|
phy
|
|
tst_y $ff,0
|
|
set_y 0,$ff ;pull
|
|
ply
|
|
tst_y $ff,$ff-zero
|
|
set_y $ff,0
|
|
ply
|
|
tst_y 0,zero
|
|
set_y $fe,$ff
|
|
ply
|
|
tst_y 1,$ff-zero-minus
|
|
set_y 0,0
|
|
ply
|
|
tst_y $ff,minus
|
|
set_y $ff,$ff
|
|
ply
|
|
tst_y 0,$ff-minus
|
|
set_y $fe,0
|
|
ply
|
|
tst_y 1,0
|
|
cpx #$55 ;x unchanged?
|
|
trap_ne
|
|
next_test
|
|
|
|
; PC modifying instructions (BRA, BBR, BBS, 1, 2, 3 byte NOPs, JMP(abs,x))
|
|
; testing unconditional branch BRA
|
|
|
|
ldx #$81 ;protect unused registers
|
|
ldy #$7e
|
|
set_a 0,$ff
|
|
bra br1 ;branch should always be taken
|
|
trap
|
|
br1
|
|
tst_a 0,$ff
|
|
set_a $ff,0
|
|
bra br2 ;branch should always be taken
|
|
trap
|
|
br2
|
|
tst_a $ff,0
|
|
cpx #$81
|
|
trap_ne
|
|
cpy #$7e
|
|
trap_ne
|
|
next_test
|
|
|
|
ldy #0 ;branch range test
|
|
bra bra0
|
|
|
|
bra1 cpy #1
|
|
trap_ne ;long range backward
|
|
iny
|
|
bra bra2
|
|
|
|
bra3 cpy #3
|
|
trap_ne ;long range backward
|
|
iny
|
|
bra bra4
|
|
|
|
bra5 cpy #5
|
|
trap_ne ;long range backward
|
|
iny
|
|
ldy #0
|
|
bra brf0
|
|
|
|
iny
|
|
iny
|
|
iny
|
|
iny
|
|
brf0 bra brf1
|
|
|
|
iny
|
|
iny
|
|
iny
|
|
brf1 iny
|
|
bra brf2
|
|
|
|
iny
|
|
iny
|
|
brf2 iny
|
|
iny
|
|
bra brf3
|
|
|
|
iny
|
|
brf3 iny
|
|
iny
|
|
iny
|
|
bra brf4
|
|
|
|
brf4 iny
|
|
iny
|
|
iny
|
|
iny
|
|
cpy #10
|
|
trap_ne ;short range forward
|
|
bra brb0
|
|
|
|
brb4 dey
|
|
dey
|
|
dey
|
|
dey
|
|
bra brb5
|
|
|
|
brb3 dey
|
|
dey
|
|
dey
|
|
bra brb4
|
|
|
|
brb2 dey
|
|
dey
|
|
bra brb3
|
|
|
|
brb1 dey
|
|
bra brb2
|
|
|
|
brb0 bra brb1
|
|
|
|
brb5 cpy #0
|
|
trap_ne ;short range backward
|
|
bra bra6
|
|
|
|
bra4 cpy #4
|
|
trap_ne ;long range forward
|
|
iny
|
|
bra bra5
|
|
|
|
bra2 cpy #2
|
|
trap_ne ;long range forward
|
|
iny
|
|
bra bra3
|
|
|
|
bra0 cpy #0
|
|
trap_ne ;long range forward
|
|
iny
|
|
bra bra1
|
|
|
|
bra6
|
|
next_test
|
|
|
|
if rkwl_wdc_op = 1
|
|
; testing BBR & BBS
|
|
|
|
bbt macro ;\1 = bitnum
|
|
lda #(1<<\1) ;testing 1 bit on
|
|
sta zpt
|
|
set_a $33,0 ;with flags off
|
|
bbr \1,zpt,fail1\?
|
|
bbs \1,zpt,ok1\?
|
|
trap ;bbs branch not taken
|
|
fail1\?
|
|
trap ;bbr branch taken
|
|
ok1\?
|
|
tst_a $33,0
|
|
set_a $cc,$ff ;with flags on
|
|
bbr \1,zpt,fail2\?
|
|
bbs \1,zpt,ok2\?
|
|
trap ;bbs branch not taken
|
|
fail2\?
|
|
trap ;bbr branch taken
|
|
ok2\?
|
|
tst_a $cc,$ff
|
|
lda zpt
|
|
cmp #(1<<\1)
|
|
trap_ne ;zp altered
|
|
lda #$ff-(1<<\1) ;testing 1 bit off
|
|
sta zpt
|
|
set_a $33,0 ;with flags off
|
|
bbs \1,zpt,fail3\?
|
|
bbr \1,zpt,ok3\?
|
|
trap ;bbr branch not taken
|
|
fail3\?
|
|
trap ;bbs branch taken
|
|
ok3\?
|
|
tst_a $33,0
|
|
set_a $cc,$ff ;with flags on
|
|
bbs \1,zpt,fail4\?
|
|
bbr \1,zpt,ok4\?
|
|
trap ;bbr branch not taken
|
|
fail4\?
|
|
trap ;bbs branch taken
|
|
ok4\?
|
|
tst_a $cc,$ff
|
|
lda zpt
|
|
cmp #$ff-(1<<\1)
|
|
trap_ne ;zp altered
|
|
endm
|
|
|
|
ldx #$11 ;test bbr/bbs integrity
|
|
ldy #$22
|
|
bbt 0
|
|
bbt 1
|
|
bbt 2
|
|
bbt 3
|
|
bbt 4
|
|
bbt 5
|
|
bbt 6
|
|
bbt 7
|
|
cpx #$11
|
|
trap_ne ;x overwritten
|
|
cpy #$22
|
|
trap_ne ;y overwritten
|
|
next_test
|
|
|
|
bbrc macro ;\1 = bitnum
|
|
bbr \1,zpt,skip\?
|
|
eor #(1<<\1)
|
|
skip\?
|
|
endm
|
|
bbsc macro ;\1 = bitnum
|
|
bbs \1,zpt,skip\?
|
|
eor #(1<<\1)
|
|
skip\?
|
|
endm
|
|
|
|
lda #0 ;combined bit test
|
|
sta zpt
|
|
bbcl lda #0
|
|
bbrc 0
|
|
bbrc 1
|
|
bbrc 2
|
|
bbrc 3
|
|
bbrc 4
|
|
bbrc 5
|
|
bbrc 6
|
|
bbrc 7
|
|
eor zpt
|
|
trap_ne ;failed bbr bitnum in accu
|
|
lda #$ff
|
|
bbsc 0
|
|
bbsc 1
|
|
bbsc 2
|
|
bbsc 3
|
|
bbsc 4
|
|
bbsc 5
|
|
bbsc 6
|
|
bbsc 7
|
|
eor zpt
|
|
trap_ne ;failed bbs bitnum in accu
|
|
inc zpt
|
|
bne bbcl
|
|
next_test
|
|
endif
|
|
|
|
; testing NOP
|
|
|
|
nop_test macro ;\1 = opcode, \2 = # of bytes
|
|
ldy #$42
|
|
ldx #4-\2
|
|
db \1 ;test nop length
|
|
if \2 = 1
|
|
dex
|
|
dex
|
|
endif
|
|
if \2 = 2
|
|
iny
|
|
dex
|
|
endif
|
|
if \2 = 3
|
|
iny
|
|
iny
|
|
endif
|
|
dex
|
|
trap_ne ;wrong number of bytes
|
|
set_a $ff-\1,0
|
|
db \1 ;test nop integrity - flags off
|
|
nop
|
|
nop
|
|
tst_a $ff-\1,0
|
|
set_a $aa-\1,$ff
|
|
db \1 ;test nop integrity - flags on
|
|
nop
|
|
nop
|
|
tst_a $aa-\1,$ff
|
|
cpy #$42
|
|
trap_ne ;y changed
|
|
cpx #0
|
|
trap_ne ;x changed
|
|
endm
|
|
|
|
nop_test $02,2
|
|
nop_test $22,2
|
|
nop_test $42,2
|
|
nop_test $62,2
|
|
nop_test $82,2
|
|
nop_test $c2,2
|
|
nop_test $e2,2
|
|
nop_test $44,2
|
|
nop_test $54,2
|
|
nop_test $d4,2
|
|
nop_test $f4,2
|
|
nop_test $5c,3
|
|
nop_test $dc,3
|
|
nop_test $fc,3
|
|
nop_test $03,1
|
|
nop_test $13,1
|
|
nop_test $23,1
|
|
nop_test $33,1
|
|
nop_test $43,1
|
|
nop_test $53,1
|
|
nop_test $63,1
|
|
nop_test $73,1
|
|
nop_test $83,1
|
|
nop_test $93,1
|
|
nop_test $a3,1
|
|
nop_test $b3,1
|
|
nop_test $c3,1
|
|
nop_test $d3,1
|
|
nop_test $e3,1
|
|
nop_test $f3,1
|
|
nop_test $0b,1
|
|
nop_test $1b,1
|
|
nop_test $2b,1
|
|
nop_test $3b,1
|
|
nop_test $4b,1
|
|
nop_test $5b,1
|
|
nop_test $6b,1
|
|
nop_test $7b,1
|
|
nop_test $8b,1
|
|
nop_test $9b,1
|
|
nop_test $ab,1
|
|
nop_test $bb,1
|
|
nop_test $eb,1
|
|
nop_test $fb,1
|
|
if rkwl_wdc_op = 0 ;NOPs not available on Rockwell & WDC 65C02
|
|
nop_test $07,1
|
|
nop_test $17,1
|
|
nop_test $27,1
|
|
nop_test $37,1
|
|
nop_test $47,1
|
|
nop_test $57,1
|
|
nop_test $67,1
|
|
nop_test $77,1
|
|
nop_test $87,1
|
|
nop_test $97,1
|
|
nop_test $a7,1
|
|
nop_test $b7,1
|
|
nop_test $c7,1
|
|
nop_test $d7,1
|
|
nop_test $e7,1
|
|
nop_test $f7,1
|
|
nop_test $0f,1
|
|
nop_test $1f,1
|
|
nop_test $2f,1
|
|
nop_test $3f,1
|
|
nop_test $4f,1
|
|
nop_test $5f,1
|
|
nop_test $6f,1
|
|
nop_test $7f,1
|
|
nop_test $8f,1
|
|
nop_test $9f,1
|
|
nop_test $af,1
|
|
nop_test $bf,1
|
|
nop_test $cf,1
|
|
nop_test $df,1
|
|
nop_test $ef,1
|
|
nop_test $ff,1
|
|
endif
|
|
if wdc_op = 0 ;NOPs not available on WDC 65C02 (WAI, STP)
|
|
nop_test $cb,1
|
|
nop_test $db,1
|
|
endif
|
|
next_test
|
|
|
|
; jump indirect (test page cross bug is fixed)
|
|
ldx #3 ;prepare table
|
|
ji1 lda ji_adr,x
|
|
sta ji_tab,x
|
|
dex
|
|
bpl ji1
|
|
lda #hi(ji_px) ;high address if page cross bug
|
|
sta pg_x
|
|
set_stat 0
|
|
lda #'I'
|
|
ldx #'N'
|
|
ldy #'D' ;N=0, V=0, Z=0, C=0
|
|
jmp (ji_tab)
|
|
nop
|
|
trap_ne ;runover protection
|
|
|
|
dey
|
|
dey
|
|
ji_ret php ;either SP or Y count will fail, if we do not hit
|
|
dey
|
|
dey
|
|
dey
|
|
plp
|
|
trap_eq ;returned flags OK?
|
|
trap_pl
|
|
trap_cc
|
|
trap_vc
|
|
cmp #('I'^$aa) ;returned registers OK?
|
|
trap_ne
|
|
cpx #('N'+1)
|
|
trap_ne
|
|
cpy #('D'-6)
|
|
trap_ne
|
|
tsx ;SP check
|
|
cpx #$ff
|
|
trap_ne
|
|
next_test
|
|
|
|
; jump indexed indirect
|
|
ldx #11 ;prepare table
|
|
jxi1 lda jxi_adr,x
|
|
sta jxi_tab,x
|
|
dex
|
|
bpl jxi1
|
|
lda #hi(jxi_px) ;high address if page cross bug
|
|
sta pg_x
|
|
set_stat 0
|
|
lda #'X'
|
|
ldx #4
|
|
ldy #'I' ;N=0, V=0, Z=0, C=0
|
|
jmp (jxi_tab,x)
|
|
nop
|
|
trap_ne ;runover protection
|
|
|
|
dey
|
|
dey
|
|
jxi_ret php ;either SP or Y count will fail, if we do not hit
|
|
dey
|
|
dey
|
|
dey
|
|
plp
|
|
trap_eq ;returned flags OK?
|
|
trap_pl
|
|
trap_cc
|
|
trap_vc
|
|
cmp #('X'^$aa) ;returned registers OK?
|
|
trap_ne
|
|
cpx #6
|
|
trap_ne
|
|
cpy #('I'-6)
|
|
trap_ne
|
|
tsx ;SP check
|
|
cpx #$ff
|
|
trap_ne
|
|
|
|
lda #lo(jxp_ok) ;test with index causing a page cross
|
|
sta jxp_tab
|
|
lda #hi(jxp_ok)
|
|
sta jxp_tab+1
|
|
lda #lo(jxp_px)
|
|
sta pg_x
|
|
lda #hi(jxp_px)
|
|
sta pg_x+1
|
|
ldx #$ff
|
|
jmp (jxp_tab-$ff,x)
|
|
|
|
jxp_px
|
|
trap ;page cross by index to wrong page
|
|
|
|
jxp_ok
|
|
next_test
|
|
|
|
if ROM_vectors = 1
|
|
; test BRK clears decimal mode
|
|
sed
|
|
brk
|
|
nop
|
|
brk_ret
|
|
next_test
|
|
endif
|
|
|
|
; testing accumulator increment/decrement INC A & DEC A
|
|
ldx #$ac ;protect x & y
|
|
ldy #$dc
|
|
set_a $fe,$ff
|
|
inc a ;ff
|
|
tst_as $ff,$ff-zero
|
|
inc a ;00
|
|
tst_as 0,$ff-minus
|
|
inc a ;01
|
|
tst_as 1,$ff-minus-zero
|
|
dec a ;00
|
|
tst_as 0,$ff-minus
|
|
dec a ;ff
|
|
tst_as $ff,$ff-zero
|
|
dec a ;fe
|
|
set_a $fe,0
|
|
inc a ;ff
|
|
tst_as $ff,minus
|
|
inc a ;00
|
|
tst_as 0,zero
|
|
inc a ;01
|
|
tst_as 1,0
|
|
dec a ;00
|
|
tst_as 0,zero
|
|
dec a ;ff
|
|
tst_as $ff,minus
|
|
cpx #$ac
|
|
trap_ne ;x altered during test
|
|
cpy #$dc
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; testing load / store accumulator LDA / STA (zp)
|
|
ldx #$99 ;protect x & y
|
|
ldy #$66
|
|
set_stat 0
|
|
lda (ind1)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$c3 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag 0
|
|
cmp fLDx ;test flags
|
|
trap_ne
|
|
set_stat 0
|
|
lda (ind1+2)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+2)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$82 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag 0
|
|
cmp fLDx+1 ;test flags
|
|
trap_ne
|
|
set_stat 0
|
|
lda (ind1+4)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+4)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$41 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag 0
|
|
cmp fLDx+2 ;test flags
|
|
trap_ne
|
|
set_stat 0
|
|
lda (ind1+6)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+6)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #0 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag 0
|
|
cmp fLDx+3 ;test flags
|
|
trap_ne
|
|
cpx #$99
|
|
trap_ne ;x altered during test
|
|
cpy #$66
|
|
trap_ne ;y altered during test
|
|
|
|
ldy #3 ;testing store result
|
|
ldx #0
|
|
tstai1 lda abst,y
|
|
eor #$c3
|
|
cmp abs1,y
|
|
trap_ne ;store to indirect data
|
|
txa
|
|
sta abst,y ;clear
|
|
dey
|
|
bpl tstai1
|
|
|
|
ldx #$99 ;protect x & y
|
|
ldy #$66
|
|
set_stat $ff
|
|
lda (ind1)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$c3 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag lo~fnz ;mask bits not altered
|
|
cmp fLDx ;test flags
|
|
trap_ne
|
|
set_stat $ff
|
|
lda (ind1+2)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+2)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$82 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag lo~fnz ;mask bits not altered
|
|
cmp fLDx+1 ;test flags
|
|
trap_ne
|
|
set_stat $ff
|
|
lda (ind1+4)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+4)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #$41 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag lo~fnz ;mask bits not altered
|
|
cmp fLDx+2 ;test flags
|
|
trap_ne
|
|
set_stat $ff
|
|
lda (ind1+6)
|
|
php ;test stores do not alter flags
|
|
eor #$c3
|
|
plp
|
|
sta (indt+6)
|
|
php ;flags after load/store sequence
|
|
eor #$c3
|
|
cmp #0 ;test result
|
|
trap_ne
|
|
pla ;load status
|
|
eor_flag lo~fnz ;mask bits not altered
|
|
cmp fLDx+3 ;test flags
|
|
trap_ne
|
|
cpx #$99
|
|
trap_ne ;x altered during test
|
|
cpy #$66
|
|
trap_ne ;y altered during test
|
|
|
|
ldy #3 ;testing store result
|
|
ldx #0
|
|
tstai2 lda abst,y
|
|
eor #$c3
|
|
cmp abs1,y
|
|
trap_ne ;store to indirect data
|
|
txa
|
|
sta abst,y ;clear
|
|
dey
|
|
bpl tstai2
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; testing STZ - zp / abs / zp,x / abs,x
|
|
ldy #123 ;protect y
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz1 sta zpt,x
|
|
asl a
|
|
dex
|
|
bpl tstz1
|
|
ldx #4
|
|
set_a $55,$ff
|
|
stz zpt
|
|
stz zpt+1
|
|
stz zpt+2
|
|
stz zpt+3
|
|
stz zpt+4
|
|
tst_a $55,$ff
|
|
tstz2 lda zpt,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz2
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz3 sta zpt,x
|
|
asl a
|
|
dex
|
|
bpl tstz3
|
|
ldx #4
|
|
set_a $aa,0
|
|
stz zpt
|
|
stz zpt+1
|
|
stz zpt+2
|
|
stz zpt+3
|
|
stz zpt+4
|
|
tst_a $aa,0
|
|
tstz4 lda zpt,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz4
|
|
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz5 sta abst,x
|
|
asl a
|
|
dex
|
|
bpl tstz5
|
|
ldx #4
|
|
set_a $55,$ff
|
|
stz abst
|
|
stz abst+1
|
|
stz abst+2
|
|
stz abst+3
|
|
stz abst+4
|
|
tst_a $55,$ff
|
|
tstz6 lda abst,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ abs
|
|
dex
|
|
bpl tstz6
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz7 sta abst,x
|
|
asl a
|
|
dex
|
|
bpl tstz7
|
|
ldx #4
|
|
set_a $aa,0
|
|
stz abst
|
|
stz abst+1
|
|
stz abst+2
|
|
stz abst+3
|
|
stz abst+4
|
|
tst_a $aa,0
|
|
tstz8 lda abst,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ abs
|
|
dex
|
|
bpl tstz8
|
|
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz11 sta zpt,x
|
|
asl a
|
|
dex
|
|
bpl tstz11
|
|
ldx #4
|
|
tstz15
|
|
set_a $55,$ff
|
|
stz zpt,x
|
|
tst_a $55,$ff
|
|
dex
|
|
bpl tstz15
|
|
ldx #4
|
|
tstz12 lda zpt,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz12
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz13 sta zpt,x
|
|
asl a
|
|
dex
|
|
bpl tstz13
|
|
ldx #4
|
|
tstz16
|
|
set_a $aa,0
|
|
stz zpt,x
|
|
tst_a $aa,0
|
|
dex
|
|
bpl tstz16
|
|
ldx #4
|
|
tstz14 lda zpt,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz14
|
|
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz21 sta abst,x
|
|
asl a
|
|
dex
|
|
bpl tstz21
|
|
ldx #4
|
|
tstz25
|
|
set_a $55,$ff
|
|
stz abst,x
|
|
tst_a $55,$ff
|
|
dex
|
|
bpl tstz25
|
|
ldx #4
|
|
tstz22 lda abst,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz22
|
|
ldx #4 ;precharge test area
|
|
lda #7
|
|
tstz23 sta abst,x
|
|
asl a
|
|
dex
|
|
bpl tstz23
|
|
ldx #4
|
|
tstz26
|
|
set_a $aa,0
|
|
stz abst,x
|
|
tst_a $aa,0
|
|
dex
|
|
bpl tstz26
|
|
ldx #4
|
|
tstz24 lda abst,x ;verify zeros stored
|
|
trap_ne ;non zero after STZ zp
|
|
dex
|
|
bpl tstz24
|
|
|
|
cpy #123
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; testing BIT - zp,x / abs,x / #
|
|
ldy #$42
|
|
ldx #3
|
|
set_a $ff,0
|
|
bit zp1,x ;00 - should set Z / clear NV
|
|
tst_a $ff,fz
|
|
dex
|
|
set_a 1,0
|
|
bit zp1,x ;41 - should set V (M6) / clear NZ
|
|
tst_a 1,fv
|
|
dex
|
|
set_a 1,0
|
|
bit zp1,x ;82 - should set N (M7) & Z / clear V
|
|
tst_a 1,fnz
|
|
dex
|
|
set_a 1,0
|
|
bit zp1,x ;c3 - should set N (M7) & V (M6) / clear Z
|
|
tst_a 1,fnv
|
|
|
|
set_a 1,$ff
|
|
bit zp1,x ;c3 - should set N (M7) & V (M6) / clear Z
|
|
tst_a 1,~fz
|
|
inx
|
|
set_a 1,$ff
|
|
bit zp1,x ;82 - should set N (M7) & Z / clear V
|
|
tst_a 1,~fv
|
|
inx
|
|
set_a 1,$ff
|
|
bit zp1,x ;41 - should set V (M6) / clear NZ
|
|
tst_a 1,~fnz
|
|
inx
|
|
set_a $ff,$ff
|
|
bit zp1,x ;00 - should set Z / clear NV
|
|
tst_a $ff,~fnv
|
|
|
|
set_a $ff,0
|
|
bit abs1,x ;00 - should set Z / clear NV
|
|
tst_a $ff,fz
|
|
dex
|
|
set_a 1,0
|
|
bit abs1,x ;41 - should set V (M6) / clear NZ
|
|
tst_a 1,fv
|
|
dex
|
|
set_a 1,0
|
|
bit abs1,x ;82 - should set N (M7) & Z / clear V
|
|
tst_a 1,fnz
|
|
dex
|
|
set_a 1,0
|
|
bit abs1,x ;c3 - should set N (M7) & V (M6) / clear Z
|
|
tst_a 1,fnv
|
|
|
|
set_a 1,$ff
|
|
bit abs1,x ;c3 - should set N (M7) & V (M6) / clear Z
|
|
tst_a 1,~fz
|
|
inx
|
|
set_a 1,$ff
|
|
bit abs1,x ;82 - should set N (M7) & Z / clear V
|
|
tst_a 1,~fv
|
|
inx
|
|
set_a 1,$ff
|
|
bit abs1,x ;41 - should set V (M6) / clear NZ
|
|
tst_a 1,~fnz
|
|
inx
|
|
set_a $ff,$ff
|
|
bit abs1,x ;00 - should set Z / clear NV
|
|
tst_a $ff,~fnv
|
|
|
|
set_a $ff,0
|
|
bit #$00 ;00 - should set Z
|
|
tst_a $ff,fz
|
|
dex
|
|
set_a 1,0
|
|
bit #$41 ;41 - should clear Z
|
|
tst_a 1,0
|
|
; *** DEBUG INFO ***
|
|
; if it fails the previous test and your BIT # has set the V flag
|
|
; see http://forum.6502.org/viewtopic.php?f=2&t=2241&p=27243#p27239
|
|
; why it shouldn't alter N or V flags on a BIT #
|
|
dex
|
|
set_a 1,0
|
|
bit #$82 ;82 - should set Z
|
|
tst_a 1,fz
|
|
dex
|
|
set_a 1,0
|
|
bit #$c3 ;c3 - should clear Z
|
|
tst_a 1,0
|
|
|
|
set_a 1,$ff
|
|
bit #$c3 ;c3 - clear Z
|
|
tst_a 1,~fz
|
|
inx
|
|
set_a 1,$ff
|
|
bit #$82 ;82 - should set Z
|
|
tst_a 1,$ff
|
|
inx
|
|
set_a 1,$ff
|
|
bit #$41 ;41 - should clear Z
|
|
tst_a 1,~fz
|
|
inx
|
|
set_a $ff,$ff
|
|
bit #$00 ;00 - should set Z
|
|
tst_a $ff,$ff
|
|
|
|
cpx #3
|
|
trap_ne ;x altered during test
|
|
cpy #$42
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; testing TRB, TSB - zp / abs
|
|
|
|
trbt macro ;\1 = memory, \2 = flags
|
|
sty \1
|
|
load_flag \2
|
|
pha
|
|
lda zpt+1
|
|
plp
|
|
trb \1
|
|
php
|
|
cmp zpt+1
|
|
trap_ne ;accu was changed
|
|
pla
|
|
pha
|
|
ora #fz ;mask Z
|
|
cmp_flag \2|fz
|
|
trap_ne ;flags changed except Z
|
|
pla
|
|
and #fz
|
|
cmp zpt+2
|
|
trap_ne ;Z flag invalid
|
|
lda zpt+3
|
|
cmp zpt
|
|
trap_ne ;altered bits in memory wrong
|
|
endm
|
|
|
|
tsbt macro ;\1 = memory, \2 = flags
|
|
sty \1
|
|
load_flag \2
|
|
pha
|
|
lda zpt+1
|
|
plp
|
|
tsb \1
|
|
php
|
|
cmp zpt+1
|
|
trap_ne ;accu was changed
|
|
pla
|
|
pha
|
|
ora #fz ;mask Z
|
|
cmp_flag \2|fz
|
|
trap_ne ;flags changed except Z
|
|
pla
|
|
and #fz
|
|
cmp zpt+2
|
|
trap_ne ;Z flag invalid
|
|
lda zpt+4
|
|
cmp zpt
|
|
trap_ne ;altered bits in memory wrong
|
|
endm
|
|
|
|
ldx #$c0
|
|
ldy #0 ;op1 - memory save
|
|
; zpt ;op1 - memory modifiable
|
|
stz zpt+1 ;op2 - accu
|
|
; zpt+2 ;and flags
|
|
; zpt+3 ;memory after reset
|
|
; zpt+4 ;memory after set
|
|
|
|
tbt1 tya
|
|
and zpt+1 ;set Z by anding the 2 operands
|
|
php
|
|
pla
|
|
and #fz ;mask Z
|
|
sta zpt+2
|
|
tya ;reset op1 bits by op2
|
|
eor #$ff
|
|
ora zpt+1
|
|
eor #$ff
|
|
sta zpt+3
|
|
tya ;set op1 bits by op2
|
|
ora zpt+1
|
|
sta zpt+4
|
|
|
|
trbt zpt,$ff
|
|
trbt abst,$ff
|
|
trbt zpt,0
|
|
trbt abst,0
|
|
tsbt zpt,$ff
|
|
tsbt abst,$ff
|
|
tsbt zpt,0
|
|
tsbt abst,0
|
|
|
|
iny ;iterate op1
|
|
bne tbt3
|
|
inc zpt+1 ;iterate op2
|
|
beq tbt2
|
|
tbt3 jmp tbt1
|
|
tbt2
|
|
cpx #$c0
|
|
trap_ne ;x altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
if rkwl_wdc_op = 1
|
|
; testing RMB, SMB - zp
|
|
rmbt macro ;\1 = bitnum
|
|
lda #$ff
|
|
sta zpt
|
|
set_a $a5,0
|
|
rmb \1,zpt
|
|
tst_a $a5,0
|
|
lda zpt
|
|
cmp #$ff-(1<<\1)
|
|
trap_ne ;wrong bits set or cleared
|
|
lda #1<<\1
|
|
sta zpt
|
|
set_a $5a,$ff
|
|
rmb \1,zpt
|
|
tst_a $5a,$ff
|
|
lda zpt
|
|
trap_ne ;wrong bits set or cleared
|
|
endm
|
|
smbt macro ;\1 = bitnum
|
|
lda #$ff-(1<<\1)
|
|
sta zpt
|
|
set_a $a5,0
|
|
smb \1,zpt
|
|
tst_a $a5,0
|
|
lda zpt
|
|
cmp #$ff
|
|
trap_ne ;wrong bits set or cleared
|
|
lda #0
|
|
sta zpt
|
|
set_a $5a,$ff
|
|
smb \1,zpt
|
|
tst_a $5a,$ff
|
|
lda zpt
|
|
cmp #1<<\1
|
|
trap_ne ;wrong bits set or cleared
|
|
endm
|
|
|
|
ldx #$ba ;protect x & y
|
|
ldy #$d0
|
|
rmbt 0
|
|
rmbt 1
|
|
rmbt 2
|
|
rmbt 3
|
|
rmbt 4
|
|
rmbt 5
|
|
rmbt 6
|
|
rmbt 7
|
|
smbt 0
|
|
smbt 1
|
|
smbt 2
|
|
smbt 3
|
|
smbt 4
|
|
smbt 5
|
|
smbt 6
|
|
smbt 7
|
|
cpx #$ba
|
|
trap_ne ;x altered during test
|
|
cpy #$d0
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
endif
|
|
|
|
; testing CMP - (zp)
|
|
ldx #$de ;protect x & y
|
|
ldy #$ad
|
|
set_a $80,0
|
|
cmp (ind1+8)
|
|
tst_a $80,fc
|
|
set_a $7f,0
|
|
cmp (ind1+8)
|
|
tst_a $7f,fzc
|
|
set_a $7e,0
|
|
cmp (ind1+8)
|
|
tst_a $7e,fn
|
|
set_a $80,$ff
|
|
cmp (ind1+8)
|
|
tst_a $80,~fnz
|
|
set_a $7f,$ff
|
|
cmp (ind1+8)
|
|
tst_a $7f,~fn
|
|
set_a $7e,$ff
|
|
cmp (ind1+8)
|
|
tst_a $7e,~fzc
|
|
cpx #$de
|
|
trap_ne ;x altered during test
|
|
cpy #$ad
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; testing logical instructions - AND EOR ORA (zp)
|
|
ldx #$42 ;protect x & y
|
|
|
|
ldy #0 ;AND
|
|
lda indAN ;set indirect address
|
|
sta zpt
|
|
lda indAN+1
|
|
sta zpt+1
|
|
tand1
|
|
set_ay absANa,0
|
|
and (zpt)
|
|
tst_ay absrlo,absflo,0
|
|
inc zpt
|
|
iny
|
|
cpy #4
|
|
bne tand1
|
|
dey
|
|
dec zpt
|
|
tand2
|
|
set_ay absANa,$ff
|
|
and (zpt)
|
|
tst_ay absrlo,absflo,$ff-fnz
|
|
dec zpt
|
|
dey
|
|
bpl tand2
|
|
|
|
ldy #0 ;EOR
|
|
lda indEO ;set indirect address
|
|
sta zpt
|
|
lda indEO+1
|
|
sta zpt+1
|
|
teor1
|
|
set_ay absEOa,0
|
|
eor (zpt)
|
|
tst_ay absrlo,absflo,0
|
|
inc zpt
|
|
iny
|
|
cpy #4
|
|
bne teor1
|
|
dey
|
|
dec zpt
|
|
teor2
|
|
set_ay absEOa,$ff
|
|
eor (zpt)
|
|
tst_ay absrlo,absflo,$ff-fnz
|
|
dec zpt
|
|
dey
|
|
bpl teor2
|
|
|
|
ldy #0 ;ORA
|
|
lda indOR ;set indirect address
|
|
sta zpt
|
|
lda indOR+1
|
|
sta zpt+1
|
|
tora1
|
|
set_ay absORa,0
|
|
ora (zpt)
|
|
tst_ay absrlo,absflo,0
|
|
inc zpt
|
|
iny
|
|
cpy #4
|
|
bne tora1
|
|
dey
|
|
dec zpt
|
|
tora2
|
|
set_ay absORa,$ff
|
|
ora (zpt)
|
|
tst_ay absrlo,absflo,$ff-fnz
|
|
dec zpt
|
|
dey
|
|
bpl tora2
|
|
|
|
cpx #$42
|
|
trap_ne ;x altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
if I_flag = 3
|
|
cli
|
|
endif
|
|
|
|
; full binary add/subtract test - (zp) only
|
|
; iterates through all combinations of operands and carry input
|
|
; uses increments/decrements to predict result & result flags
|
|
cld
|
|
ldx #ad2 ;for indexed test
|
|
ldy #$ff ;max range
|
|
lda #0 ;start with adding zeroes & no carry
|
|
sta adfc ;carry in - for diag
|
|
sta ad1 ;operand 1 - accumulator
|
|
sta ad2 ;operand 2 - memory or immediate
|
|
sta ada2 ;non zp
|
|
sta adrl ;expected result bits 0-7
|
|
sta adrh ;expected result bit 8 (carry out)
|
|
lda #$ff ;complemented operand 2 for subtract
|
|
sta sb2
|
|
sta sba2 ;non zp
|
|
lda #2 ;expected Z-flag
|
|
sta adrf
|
|
tadd clc ;test with carry clear
|
|
jsr chkadd
|
|
inc adfc ;now with carry
|
|
inc adrl ;result +1
|
|
php ;save N & Z from low result
|
|
php
|
|
pla ;accu holds expected flags
|
|
and #$82 ;mask N & Z
|
|
plp
|
|
bne tadd1
|
|
inc adrh ;result bit 8 - carry
|
|
tadd1 ora adrh ;merge C to expected flags
|
|
sta adrf ;save expected flags except overflow
|
|
sec ;test with carry set
|
|
jsr chkadd
|
|
dec adfc ;same for operand +1 but no carry
|
|
inc ad1
|
|
bne tadd ;iterate op1
|
|
lda #0 ;preset result to op2 when op1 = 0
|
|
sta adrh
|
|
inc ada2
|
|
inc ad2
|
|
php ;save NZ as operand 2 becomes the new result
|
|
pla
|
|
and #$82 ;mask N00000Z0
|
|
sta adrf ;no need to check carry as we are adding to 0
|
|
dec sb2 ;complement subtract operand 2
|
|
dec sba2
|
|
lda ad2
|
|
sta adrl
|
|
bne tadd ;iterate op2
|
|
|
|
cpx #ad2
|
|
trap_ne ;x altered during test
|
|
cpy #$ff
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
next_test
|
|
|
|
; decimal add/subtract test
|
|
; *** WARNING - tests documented behavior only! ***
|
|
; only valid BCD operands are tested, the V flag is ignored
|
|
; although V is declared as beeing valid on the 65C02 it has absolutely
|
|
; no use in BCD math. No sign = no overflow!
|
|
; iterates through all valid combinations of operands and carry input
|
|
; uses increments/decrements to predict result & carry flag
|
|
sed
|
|
ldx #ad2 ;for indexed test
|
|
ldy #$ff ;max range
|
|
lda #$99 ;start with adding 99 to 99 with carry
|
|
sta ad1 ;operand 1 - accumulator
|
|
sta ad2 ;operand 2 - memory or immediate
|
|
sta ada2 ;non zp
|
|
sta adrl ;expected result bits 0-7
|
|
lda #1 ;set carry in & out
|
|
sta adfc ;carry in - for diag
|
|
sta adrh ;expected result bit 8 (carry out)
|
|
lda #$81 ;set N & C (99 + 99 + C = 99 + C)
|
|
sta adrf
|
|
lda #0 ;complemented operand 2 for subtract
|
|
sta sb2
|
|
sta sba2 ;non zp
|
|
tdad sec ;test with carry set
|
|
jsr chkdad
|
|
dec adfc ;now with carry clear
|
|
lda adrl ;decimal adjust result
|
|
bne tdad1 ;skip clear carry & preset result 99 (9A-1)
|
|
dec adrh
|
|
lda #$99
|
|
sta adrl
|
|
bne tdad3
|
|
tdad1 and #$f ;lower nibble mask
|
|
bne tdad2 ;no decimal adjust needed
|
|
dec adrl ;decimal adjust (?0-6)
|
|
dec adrl
|
|
dec adrl
|
|
dec adrl
|
|
dec adrl
|
|
dec adrl
|
|
tdad2 dec adrl ;result -1
|
|
tdad3 php ;save valid flags
|
|
pla
|
|
and #$82 ;N-----Z-
|
|
ora adrh ;N-----ZC
|
|
sta adrf
|
|
clc ;test with carry clear
|
|
jsr chkdad
|
|
inc adfc ;same for operand -1 but with carry
|
|
lda ad1 ;decimal adjust operand 1
|
|
beq tdad5 ;iterate operand 2
|
|
and #$f ;lower nibble mask
|
|
bne tdad4 ;skip decimal adjust
|
|
dec ad1 ;decimal adjust (?0-6)
|
|
dec ad1
|
|
dec ad1
|
|
dec ad1
|
|
dec ad1
|
|
dec ad1
|
|
tdad4 dec ad1 ;operand 1 -1
|
|
jmp tdad ;iterate op1
|
|
|
|
tdad5 lda #$99 ;precharge op1 max
|
|
sta ad1
|
|
lda ad2 ;decimal adjust operand 2
|
|
beq tdad7 ;end of iteration
|
|
and #$f ;lower nibble mask
|
|
bne tdad6 ;skip decimal adjust
|
|
dec ad2 ;decimal adjust (?0-6)
|
|
dec ad2
|
|
dec ad2
|
|
dec ad2
|
|
dec ad2
|
|
dec ad2
|
|
inc sb2 ;complemented decimal adjust for subtract (?9+6)
|
|
inc sb2
|
|
inc sb2
|
|
inc sb2
|
|
inc sb2
|
|
inc sb2
|
|
tdad6 dec ad2 ;operand 2 -1
|
|
inc sb2 ;complemented operand for subtract
|
|
lda sb2
|
|
sta sba2 ;copy as non zp operand
|
|
lda ad2
|
|
sta ada2 ;copy as non zp operand
|
|
sta adrl ;new result since op1+carry=00+carry +op2=op2
|
|
php ;save flags
|
|
pla
|
|
and #$82 ;N-----Z-
|
|
ora #1 ;N-----ZC
|
|
sta adrf
|
|
inc adrh ;result carry
|
|
jmp tdad ;iterate op2
|
|
|
|
tdad7 cpx #ad2
|
|
trap_ne ;x altered during test
|
|
cpy #$ff
|
|
trap_ne ;y altered during test
|
|
tsx
|
|
cpx #$ff
|
|
trap_ne ;sp push/pop mismatch
|
|
cld
|
|
|
|
lda test_case
|
|
cmp #test_num
|
|
trap_ne ;previous test is out of sequence
|
|
lda #$f0 ;mark opcode testing complete
|
|
sta test_case
|
|
|
|
; final RAM integrity test
|
|
; verifies that none of the previous tests has altered RAM outside of the
|
|
; designated write areas.
|
|
check_ram
|
|
; *** DEBUG INFO ***
|
|
; to debug checksum errors uncomment check_ram in the next_test macro to
|
|
; narrow down the responsible opcode.
|
|
; may give false errors when monitor, OS or other background activity is
|
|
; allowed during previous tests.
|
|
|
|
|
|
; S U C C E S S ************************************************
|
|
; -------------
|
|
success ;if you get here everything went well
|
|
; -------------
|
|
; S U C C E S S ************************************************
|
|
jmp start ;run again
|
|
|
|
; core subroutine of the decimal add/subtract test
|
|
; *** WARNING - tests documented behavior only! ***
|
|
; only valid BCD operands are tested, V flag is ignored
|
|
; iterates through all valid combinations of operands and carry input
|
|
; uses increments/decrements to predict result & carry flag
|
|
chkdad
|
|
; decimal ADC / SBC zp
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc ad2 ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc sb2 ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC abs
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc ada2 ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc sba2 ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC #
|
|
php ;save carry for subtract
|
|
lda ad2
|
|
sta ex_adci+1 ;set ADC # operand
|
|
lda ad1
|
|
jsr ex_adci ;execute ADC # in RAM
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda sb2
|
|
sta ex_sbci+1 ;set SBC # operand
|
|
lda ad1
|
|
jsr ex_sbci ;execute SBC # in RAM
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC zp,x
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc 0,x ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc sb2-ad2,x ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC abs,x
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc ada2-ad2,x ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc sba2-ad2,x ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC abs,y
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc ada2-$ff,y ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc sba2-$ff,y ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC (zp,x)
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc (lo adi2-ad2,x) ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc (lo sbi2-ad2,x) ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC (abs),y
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc (adiy2),y ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc (sbiy2),y ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
; decimal ADC / SBC (zp)
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc (adi2) ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc (sbi2) ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$83 ;mask N-----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
rts
|
|
|
|
; core subroutine of the full binary add/subtract test
|
|
; iterates through all combinations of operands and carry input
|
|
; uses increments/decrements to predict result & result flags
|
|
chkadd lda adrf ;add V-flag if overflow
|
|
and #$83 ;keep N-----ZC / clear V
|
|
pha
|
|
lda ad1 ;test sign unequal between operands
|
|
eor ad2
|
|
bmi ckad1 ;no overflow possible - operands have different sign
|
|
lda ad1 ;test sign equal between operands and result
|
|
eor adrl
|
|
bpl ckad1 ;no overflow occured - operand and result have same sign
|
|
pla
|
|
ora #$40 ;set V
|
|
pha
|
|
ckad1 pla
|
|
sta adrf ;save expected flags
|
|
; binary ADC / SBC (zp)
|
|
php ;save carry for subtract
|
|
lda ad1
|
|
adc (adi2) ;perform add
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$c3 ;mask NV----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
php ;save carry for next add
|
|
lda ad1
|
|
sbc (sbi2) ;perform subtract
|
|
php
|
|
cmp adrl ;check result
|
|
trap_ne ;bad result
|
|
pla ;check flags
|
|
and #$c3 ;mask NV----ZC
|
|
cmp adrf
|
|
trap_ne ;bad flags
|
|
plp
|
|
rts
|
|
|
|
; target for the jump indirect test
|
|
ji_adr dw test_ji
|
|
dw ji_ret
|
|
|
|
dey
|
|
dey
|
|
test_ji
|
|
php ;either SP or Y count will fail, if we do not hit
|
|
dey
|
|
dey
|
|
dey
|
|
plp
|
|
trap_cs ;flags loaded?
|
|
trap_vs
|
|
trap_mi
|
|
trap_eq
|
|
cmp #'I' ;registers loaded?
|
|
trap_ne
|
|
cpx #'N'
|
|
trap_ne
|
|
cpy #('D'-3)
|
|
trap_ne
|
|
pha ;save a,x
|
|
txa
|
|
pha
|
|
tsx
|
|
cpx #$fd ;check SP
|
|
trap_ne
|
|
pla ;restore x
|
|
tax
|
|
set_stat $ff
|
|
pla ;restore a
|
|
inx ;return registers with modifications
|
|
eor #$aa ;N=1, V=1, Z=0, C=1
|
|
jmp (ji_tab+2)
|
|
nop
|
|
nop
|
|
trap ;runover protection
|
|
|
|
; target for the jump indirect test
|
|
jxi_adr dw trap_ind
|
|
dw trap_ind
|
|
dw test_jxi ;+4
|
|
dw jxi_ret ;+6
|
|
dw trap_ind
|
|
dw trap_ind
|
|
|
|
dey
|
|
dey
|
|
test_jxi
|
|
php ;either SP or Y count will fail, if we do not hit
|
|
dey
|
|
dey
|
|
dey
|
|
plp
|
|
trap_cs ;flags loaded?
|
|
trap_vs
|
|
trap_mi
|
|
trap_eq
|
|
cmp #'X' ;registers loaded?
|
|
trap_ne
|
|
cpx #4
|
|
trap_ne
|
|
cpy #('I'-3)
|
|
trap_ne
|
|
pha ;save a,x
|
|
txa
|
|
pha
|
|
tsx
|
|
cpx #$fd ;check SP
|
|
trap_ne
|
|
pla ;restore x
|
|
tax
|
|
set_stat $ff
|
|
pla ;restore a
|
|
inx ;return registers with modifications
|
|
inx
|
|
eor #$aa ;N=1, V=1, Z=0, C=1
|
|
jmp (jxi_tab,x)
|
|
nop
|
|
nop
|
|
trap ;runover protection
|
|
|
|
; JMP (abs,x) with bad x
|
|
nop
|
|
nop
|
|
trap_ind
|
|
nop
|
|
nop
|
|
trap ;near miss indexed indirect jump
|
|
|
|
;trap in case of unexpected IRQ, NMI, BRK, RESET
|
|
nmi_trap
|
|
trap ;check stack for conditions at NMI
|
|
res_trap
|
|
trap ;unexpected RESET
|
|
irq_trap
|
|
php ;save decimal flag
|
|
tsx ;test break on stack
|
|
lda $102,x
|
|
and #break
|
|
trap_eq ;check stack for conditions at IRQ
|
|
if ROM_vectors = 1
|
|
pla ;test decimal mode cleared
|
|
and #decmode
|
|
trap_ne ;decimal mode not cleared after BRK
|
|
plp ;pop saved flags
|
|
pla ;return address low
|
|
cmp #lo(brk_ret)
|
|
trap_ne ;unexpected BRK
|
|
pla ;return address high
|
|
cmp #hi(brk_ret)
|
|
trap_ne ;unexpected BRK
|
|
jmp brk_ret
|
|
else
|
|
trap_ne ;check stack for conditions at BRK
|
|
endif
|
|
|
|
if report = 1
|
|
include "report.i65"
|
|
endif
|
|
|
|
;copy of data to initialize BSS segment
|
|
if load_data_direct != 1
|
|
zp_init
|
|
zp1_ db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
|
|
zp7f_ db $7f ;test pattern for compare
|
|
;logical zeropage operands
|
|
zpOR_ db 0,$1f,$71,$80 ;test pattern for OR
|
|
zpAN_ db $0f,$ff,$7f,$80 ;test pattern for AND
|
|
zpEO_ db $ff,$0f,$8f,$8f ;test pattern for EOR
|
|
;indirect addressing pointers
|
|
ind1_ dw abs1 ;indirect pointer to pattern in absolute memory
|
|
dw abs1+1
|
|
dw abs1+2
|
|
dw abs1+3
|
|
dw abs7f
|
|
inw1_ dw abs1-$f8 ;indirect pointer for wrap-test pattern
|
|
indt_ dw abst ;indirect pointer to store area in absolute memory
|
|
dw abst+1
|
|
dw abst+2
|
|
dw abst+3
|
|
inwt_ dw abst-$f8 ;indirect pointer for wrap-test store
|
|
indAN_ dw absAN ;indirect pointer to AND pattern in absolute memory
|
|
dw absAN+1
|
|
dw absAN+2
|
|
dw absAN+3
|
|
indEO_ dw absEO ;indirect pointer to EOR pattern in absolute memory
|
|
dw absEO+1
|
|
dw absEO+2
|
|
dw absEO+3
|
|
indOR_ dw absOR ;indirect pointer to OR pattern in absolute memory
|
|
dw absOR+1
|
|
dw absOR+2
|
|
dw absOR+3
|
|
;add/subtract indirect pointers
|
|
adi2_ dw ada2 ;indirect pointer to operand 2 in absolute memory
|
|
sbi2_ dw sba2 ;indirect pointer to complemented operand 2 (SBC)
|
|
adiy2_ dw ada2-$ff ;with offset for indirect indexed
|
|
sbiy2_ dw sba2-$ff
|
|
zp_end
|
|
if (zp_end - zp_init) != (zp_bss_end - zp_bss)
|
|
;force assembler error if size is different
|
|
ERROR ERROR ERROR ;mismatch between bss and zeropage data
|
|
endif
|
|
data_init
|
|
ex_adc_ adc #0 ;execute immediate opcodes
|
|
rts
|
|
ex_sbc_ sbc #0 ;execute immediate opcodes
|
|
rts
|
|
abs1_ db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
|
|
abs7f_ db $7f ;test pattern for compare
|
|
;loads
|
|
fLDx_ db fn,fn,0,fz ;expected flags for load
|
|
;shifts
|
|
rASL_ ;expected result ASL & ROL -carry
|
|
rROL_ db $86,$04,$82,0 ; "
|
|
rROLc_ db $87,$05,$83,1 ;expected result ROL +carry
|
|
rLSR_ ;expected result LSR & ROR -carry
|
|
rROR_ db $61,$41,$20,0 ; "
|
|
rRORc_ db $e1,$c1,$a0,$80 ;expected result ROR +carry
|
|
fASL_ ;expected flags for shifts
|
|
fROL_ db fnc,fc,fn,fz ;no carry in
|
|
fROLc_ db fnc,fc,fn,0 ;carry in
|
|
fLSR_
|
|
fROR_ db fc,0,fc,fz ;no carry in
|
|
fRORc_ db fnc,fn,fnc,fn ;carry in
|
|
;increments (decrements)
|
|
rINC_ db $7f,$80,$ff,0,1 ;expected result for INC/DEC
|
|
fINC_ db 0,fn,fn,fz,0 ;expected flags for INC/DEC
|
|
;logical memory operand
|
|
absOR_ db 0,$1f,$71,$80 ;test pattern for OR
|
|
absAN_ db $0f,$ff,$7f,$80 ;test pattern for AND
|
|
absEO_ db $ff,$0f,$8f,$8f ;test pattern for EOR
|
|
;logical accu operand
|
|
absORa_ db 0,$f1,$1f,0 ;test pattern for OR
|
|
absANa_ db $f0,$ff,$ff,$ff ;test pattern for AND
|
|
absEOa_ db $ff,$f0,$f0,$0f ;test pattern for EOR
|
|
;logical results
|
|
absrlo_ db 0,$ff,$7f,$80
|
|
absflo_ db fz,fn,0,fn
|
|
data_end
|
|
if (data_end - data_init) != (data_bss_end - data_bss)
|
|
;force assembler error if size is different
|
|
ERROR ERROR ERROR ;mismatch between bss and data
|
|
endif
|
|
|
|
vec_init
|
|
dw nmi_trap
|
|
dw res_trap
|
|
dw irq_trap
|
|
vec_bss equ $fffa
|
|
endif ;end of RAM init data
|
|
|
|
; code at end of image due to the need to add blank space as required
|
|
if ($ff & (ji_ret - * - 2)) < ($ff & (jxi_ret - * - 2))
|
|
; JMP (abs) when $xxff and $xx00 are from same page
|
|
ds lo(ji_ret - * - 2)
|
|
nop
|
|
nop
|
|
ji_px nop ;low address byte matched with ji_ret
|
|
nop
|
|
trap ;jmp indirect page cross bug
|
|
|
|
; JMP (abs,x) when $xxff and $xx00 are from same page
|
|
ds lo(jxi_ret - * - 2)
|
|
nop
|
|
nop
|
|
jxi_px nop ;low address byte matched with jxi_ret
|
|
nop
|
|
trap ;jmp indexed indirect page cross bug
|
|
else
|
|
; JMP (abs,x) when $xxff and $xx00 are from same page
|
|
ds lo(jxi_ret - * - 2)
|
|
nop
|
|
nop
|
|
jxi_px nop ;low address byte matched with jxi_ret
|
|
nop
|
|
trap ;jmp indexed indirect page cross bug
|
|
|
|
; JMP (abs) when $xxff and $xx00 are from same page
|
|
ds lo(ji_ret - * - 2)
|
|
nop
|
|
nop
|
|
ji_px nop ;low address byte matched with ji_ret
|
|
nop
|
|
trap ;jmp indirect page cross bug
|
|
endif
|
|
|
|
if (load_data_direct = 1) & (ROM_vectors = 1)
|
|
org $fffa ;vectors
|
|
dw nmi_trap
|
|
dw res_trap
|
|
dw irq_trap
|
|
endif
|
|
|
|
end start
|