EightBitNet/MC6809/StatusBits.cs

51 lines
1.8 KiB
C#
Raw Normal View History

// <copyright file="StatusBits.cs" company="Adrian Conlon">
// Copyright (c) Adrian Conlon. All rights reserved.
// </copyright>
namespace EightBit
{
using System;
[Flags]
public enum StatusBits : byte
{
None = 0,
// Carry: set if there was a carry from the bit 7 during last add
// operation, or if there was a borrow from last subtract operation,
// or if bit 7 of the A register was set during last MUL operation.
CF = Bits.Bit0,
// Overflow: set if there was an overflow during last result calculation.
// Logical, load and store operations clear this bit.
VF = Bits.Bit1,
// Zero: set if the result is zero. Like the N bit, this bit can be
// set not only by arithmetic and logical operations, but also
// by load / store operations.
ZF = Bits.Bit2,
// Negative: set if the most significant bit of the result is set.
// This bit can be set not only by arithmetic and logical operations,
// but also by load / store operations.
NF = Bits.Bit3,
// Interrupt mask: set if the IRQ interrupt is disabled.
IF = Bits.Bit4,
// Half carry: set if there was a carry from bit 3 to bit 4 of the result
// during the last add operation.
HF = Bits.Bit5,
// Fast interrupt mask: set if the FIRQ interrupt is disabled.
FF = Bits.Bit6,
// Entire flag: set if the complete machine state was saved in the stack.
// If this bit is not set then only program counter and condition code
// registers were saved in the stack. This bit is used by interrupt
// handling routines only.
// The bit is cleared by fast interrupts, and set by all other interrupts.
EF = Bits.Bit7,
}
}