Improve Apple /// Ready-To-Run instructions

Add new -S option to "plasm" to output to stdout

README.md

@@ -1,7 +1,9 @@
-# 7/4/2020 PLASMA 2.0 Alpha 1 Available!
+# 2/28/2023 PLASMA 2.0 Beta Available!
-[Download and read the Release Notes](https://github.com/dschmenk/PLASMA/releases)
+Hopefully close to a 2.0 Release.
 
-[Change List](https://github.com/dschmenk/PLASMA/blob/master/doc/Version%202.0.md#changes-in-plasma-for-20-alpha-1)
+[Download and read the Release Notes](https://github.com/dschmenk/PLASMA/blob/master/doc/Version%202.0.md)
+
+[Change List](https://github.com/dschmenk/PLASMA/blob/master/doc/Version%202.0.md#changes-in-plasma-for-20-beta)
 
 # 4/29/2018 PLASMA 1.2 Available!
 [Download and read the Release Notes](https://github.com/dschmenk/PLASMA/blob/master/doc/Version%201.2.md)

doc/ROGUE.TXT

@@ -0,0 +1,94 @@
+PLASMA goes ROGUE
+=================
+
+Introduction
+------------
+
+This version of ROGUE is somewhat different than others. It is very simple in most ways, but I have developed a (I think) unique visibility algorithm that runs extremely fast. Fast enough to run interpreted by the PLASMA VM on a 1 MHz 6502, and space efficient enough to allow for large (in the future) dungeons. The unique feature of this ROGUE is that lighting becomes critical and strategic. You are in dark catacombs, after all. You enter with a lit lamp, throwing off a circle of light. There are also torches throughout the catacombs that light up a small surrounding circle of light. Other items in the catacombs are mana (health+energy increase), a key, a raft, and gold. You will also encounter a number of enemies that will track you down to try and kill you. You will also encounter doors, locked doors, windows, water, and crevasses.
+
+Strategy
+--------
+
+As you travel through the catacombs, you must watch your health, energy, and lamp oil levels. Once health reaches zero, you are dead. As energy reaches zero, your vision will narrow and you will no longer be able to run. When the lamp oil runs out, you will be cast into darkness. If you see any torches in your field of vision, you can navigate to them. Taking the torch will extinguish the torch and replenish some of your lamp oil. Note that as you travel through the catacombs, your map of what you have seen will automatically fill in. But, if you are in the dark, you cannot read your map. You must turn on your lamp or get next to a torch before you can read the map again. If you are in the dark and can’t see any torches in your field of vision, you are in complete darkness. It is easy to lose your bearings. As such, the absolute direction movements no longer work (NSEW) - you will end up in a random direction if you try. However, the relative turns, left/right and forward/backward controls continue to work (that you can do in the dark).
+
+Being in the dark can be advantageous, however. All the enemies in the catacombs can see you if you are in light, just as you can see them. If you are in darkness, they can't see you, and you can move around without being tracked. Don't run into them! Also, don't fall off a crevasse. You will hear certain noises giving you feedback on what is going on. A simple beep when you run into walls. A groan when an enemy moves towards you. A bleep when you pick an item up. Other noises when you fall over an edge or win a battle. These can be used strategically when moving in the dark.
+
+Health will slowly improve as you move around. However, energy is depleted as you move. Mana will increase both health and energy. If health is already at 100, it won’t go any higher. Same for energy, but it is important to keep both high. When energy goes low, you can no longer move quickly and your field-of-vision narrows. When health goes to zero, you are dead.
+
+Tile Description
+----------------
+
+As ROGUE uses the text screen for display, a little creativity is required to interpret the map. These are the characters you will see and what the represent. Once you get the hang of it, it will be just like looking at the unencoded Matrix.
+
+Screen Character      Represents
+   #                    Wall
+   .                    Floor
+   :                    Window (barred opening)
+   +                    Door
+   %                    Locked Door (need key to open)
+   ' ' space            Crevasse (pit - don't fall in)
+   =                    Exit
+   -                    Entrance
+   *                    Torch
+   &                    Mana
+   ,                    Key (yep, hard to spot)
+   @                    Raft (need to cross water)
+   <<<                  Water
+   >>>                  Water (you will drown without raft)
+   $                    Gold
+
+Flashing               Entity
+   T                    Thief
+   O                    Ogre
+   Z                    Zombie
+   R                    Rogue
+
+ Player               Facing Direction
+   ^                    North
+   \                    NE
+   >                    East
+   /                    SE
+   v                    South
+   \                    SW
+   <                    West
+   /                    NW
+Tiles in light are inverse. Entities are displayed only when lit and in field of view. The map is only visible when lit, i.e lamp is on or standing next to a torch.
+
+Interaction
+-----------
+
+Keyboard commands        Action
+   Q                    Run (Quick)
+   W up-arrow           Forward
+   S down-arrow         Backward
+   A left-arrow         Turn left
+   D right-arrow        Turn right
+   I                    Move N
+   J                    Move W
+   K                    Move E
+   M                    Move S
+   < ,                  Turn lamp down
+   > .                  Turn lamp up/on
+   O                    Turn lamp off
+   Space-bar            Open door
+   Return               Pick up item
+   X                    Exit (die)
+Whenever you and an enemy end up on the same tile, battle commences. As you win fights, your skill increases, improving your attack effectiveness. As you advance through the catacombs, the enemies become more powerful. You will need to replenish health and energy with mana. Don't forget, the alternative to fighting is stealth in the darkness. During battle, you have the option to run. If you have low energy, you won't get very far. Also, when fighting, you get turned around so you can't depend on the direction you were facing before fighting. Running ('Q'uick) will get you away from enemies but will use much more energy.
+
+If you should die, restart the game by typing:
+
++rogue
+
+Map Levels
+----------
+Level maps are up to 62x62 in size (plus a wall boundary for an effective 64x64 map size). They can be smaller than this. The game will end when it tries to load an non-existent level. Levels start at file name “LEVEL0“ and can go all the way to “LEVEL9“, but must be sequential.
+
+There are two levels included on the disk, and an empty level for you to use as a template. You can edit the map levels, and add your own. They are simple ASCII text files. The included editor can edit the maps right on the disk. type:
+
++ed level.empty
+
+after exiting from ROGUE. Make your changes and save it as LEVEL0" to "LEVEL9". The next free level is currently "LEVEL2". You may also edit an existing level:
+
++ed level0
+
+for instance.

doc/Rogue Instructions.md

@@ -81,13 +81,13 @@ If you should die, restart the game by typing:
 
 Level maps are up to 62x62 in size (plus a wall boundary for an effective 64x64 map size). They can be smaller than this. The game will end when it tries to load an non-existent level. Levels start at file name “LEVEL0“ and can go all the way to “LEVEL9“, but must be sequential.
 
-There are two levels included on the disk, and an empty level for you to use as a template. You can edit the map levels, and add your own. They are simple ASCII text files. The included sandbox editor can edit the maps right on the disk. type:
+There are two levels included on the disk, and an empty level for you to use as a template. You can edit the map levels, and add your own. They are simple ASCII text files. The included editor can edit the maps right on the disk. type:
 ```
--sandbox level.empty
++ed level.empty
 ```
 after exiting from ROGUE. Make your changes and save it as LEVEL0" to "LEVEL9". The next free level is currently "LEVEL2". You may also edit an existing level:
 ```
--sandbox level0
++ed level0
 ```
 for instance.
 

doc/Version 2.0.md

@@ -1,20 +1,20 @@
-# PLASMA Version 2.0 Alpha 2
+# PLASMA Version 2.0
 
 Welcome to PLASMA: the Grand Unifying Platform for the Apple 1, ][, and ///.
 
 Download the five disk images:
 
-[PLASMA 2.0 Alpha2 800K Full System](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2.2mg?raw=true)
+[PLASMA 2.0 800K Full System](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2.2mg?raw=true)
 
-[PLASMA 2.0 Alpha2 System and ProDOS Boot](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-SYS.PO?raw=true)
+[PLASMA 2.0 System and ProDOS Boot](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-SYS.PO?raw=true)
 
-[PLASMA 2.0 Alpha2 Build Tools](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-BLD.PO?raw=true)
+[PLASMA 2.0 Build Tools](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-BLD.PO?raw=true)
 
-[PLASMA 2.0 Alpha2 Demos](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-DEM.PO?raw=true)
+[PLASMA 2.0 Demos](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-DEM.PO?raw=true)
 
-[PLASMA 2.0 Alpha2 TCP/IP network modules](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-INET.PO?raw=true)
+[PLASMA 2.0 TCP/IP network modules](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-INET.PO?raw=true)
 
-[PLASMA 2.0 Alpha2 Apple /// SOS Mame Boot and SANE floating point modules](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-FPSOS.PO?raw=true)
+[PLASMA 2.0 Apple /// SOS Mame Boot and SANE floating point modules](https://github.com/dschmenk/PLASMA/blob/master/images/apple/PLASMA2-FPSOS.PO?raw=true)
 
 [PLASMA 2.0 Alpha1 Apple /// Mame hard disk image](https://github.com/dschmenk/PLASMA/blob/master/images/apple/apple3.hd?raw=true)
 
@@ -46,7 +46,7 @@ PLASMA can utilize the 16 bit features of the 65802 and 65816 processors to impr
 
 ## Apple ///
 
-The Apple /// gets the environment it always wanted: The ability to navigate the filesystem with a command line interface. The Apple /// always boots from the floppy drive, even if a hard disk is installed. The PLASMA.SOS floppy should be updated with the SOS.DRIVER configured for your machine. It contains the SOS.DRIVER configured for the Apple 3 Ready-To-Run Mame environment. Once booted, type `S /HARDISK/PLASMA` (or your install directory of choice) to change to, and set, the system directory. This can be automated by creating an `AUTORUN` file on the boot floppy with the above command in it.
+The Apple /// gets the environment it always wanted: The ability to navigate the filesystem with a command line interface. The Apple /// always boots from the floppy drive, even if a hard disk is installed. `PLASMA2-FPSOS.PO` is an Apple 3 bootable disk containing the SOS.DRIVER configured for the [Apple 3 Ready-To-Run Mame environment](https://github.com/datajerk/apple3rtr). `apple3.hd` is the pre-installed PLASMA hard disk image set up for [Apple 3 Ready-to-Run](https://github.com/datajerk/apple3rtr). For a physical Apple 3, the PLASMA2-FPSOS.PO floppy should be updated with the SOS.DRIVER configured for the machine. Once booted, type `S /HARDISK/PLASMA` (or your install directory of choice) to change to, and set, the system directory. This can be automated by creating an `AUTORUN` file on the boot floppy with the above command in it.
 
 ## PLASMA Command Line Shell
 
@@ -75,7 +75,7 @@ The shell is very brief with error messages. It is meant solely as a way to run
 
 PLASMA comes with many library modules used by the tools, demos and sample code. The PLASMA system volume must remain in place for the duration of PLASMAs run otherwise it won't be able to find CMD or the system libraries. Probably the most useful included module is the editor. It is used for editing PLASMA source file, assembly source files, or any text file. Execute it with:
 ```
-+ED [TEXT FILE]
++ED [TEXT FILE] [GOTO LINE NUMBER]
 ```
 The file manipulation utilities to copy, delete, rename, create directories, and change file type and aux type remove the need for external programs to do the same. PLASMA can now be installed with the tools included on the PLASMA2-SYS boot floppy. They are:
 ```
@@ -86,7 +86,7 @@ The file manipulation utilities to copy, delete, rename, create directories, and
 +TYPE <FILENAME> [NEWTYPE [NEWAUX]]
 +CAT [-R] <FILEPATH]
 ```
-The ```-R``` option will operate on the directories recursively. Wildcard filenames can be specified with ```'*'``` matching zero or more characters, and ```'?'``` matching any character.
+The ```-R``` option will operate on the directories recursively. Wildcard filenames can be specified with ```'*'``` matching zero or more characters, and ```'?'``` matching any character. When copying files to the current directory, ```=``` can be used as a shortcut.
 
 ## Compiler Modules
 
@@ -118,6 +118,26 @@ There is a [YouTube playlist](https://www.youtube.com/playlist?list=PLlPKgUMQbJ7
 
 - The documentation is sparse and incomplete. Yep, could use your help...
 
+# Changes in PLASMA for 2.0 Release
+
+1. Fix command line buffer overflow
+
+2. Use VBlank to blink editor cursor so not CPU speed dependent
+
+3. Add ```=``` for ```+COPY``` current destination
+
+4. Add //c support for DGRLIB and GRLIB wait-for-VBlank routines 
+
+# Changes in PLASMA for 2.0 Beta
+
+1. Compilers allows for including self imported defines
+
+2. Compilers fixed for local constants
+
+3. Floating point string formatting fixes and improvements
+
+4. Fiber library exports number of active fibers
+
 # Changes in PLASMA for 2.0 Alpha 2
 
 1. Self hosted compiler fixes for invalid array size constants

src/inc/dgrlib.plh

@@ -6,6 +6,7 @@ import dgrlib
     predef dgrTile(x, y, src)#0
     predef dgrTileStr(x, y, tilestr, strlen, tilebuff)#0
     predef dgrFill(x, y, tile)#0
+    predef dgrVLB#0
     predef dgrClear(clr)#0
     predef dgrMode(mode)#1
     predef dgrShow(page)#1

src/inc/fiber.plh

@@ -1,4 +1,5 @@
 import fiber
     predef fbrInit(numPool), fbrStop(fid)#0, fbrExit#0, fbrStart(defaddr, param)
     predef fbrYield#0, fbrHalt#0, fbrResume(fid)#0
+    byte fbrCount
 end

src/inc/fpstr.plh

@@ -6,6 +6,7 @@ const FPSTR_FIXED = 1 // Fixed count of fractional digits
 const FPSTR_FLOAT = 0 // Floating count of fractional digits
 const FPSTR_STRIP = 2 // Strip trailing fractional zeros
 const FPSTR_EXP   = 4 // Force exponential format
+const FPSTR_FLEX  = 8 // Flexible switch to EXP format if over/underflow
 //
 // Parse string into decrecord, return SANE conversion output
 //

src/inc/grlib.plh

@@ -6,6 +6,7 @@ import grlib
     predef grTile(x, y, src)#0
     predef grTileStr(x, y, tilestr, strlen, tilebuff)#0
     predef grFill(x, y, tile)#0
+    predef dgrVLB#0
     predef grClear(clr)#0
     predef grMode(mode)#1
     predef grShow(page)#1

src/libsrc/apple/conio.pla

@@ -1,4 +1,5 @@
 include "inc/cmdsys.plh"
+include "inc/conio.plh"
 sysflags nojitc // Keep tone() from compiling and sounding different
 //
 // Handy constants.
@@ -34,24 +35,6 @@ const page2        = 1
 //
 const ENV_REG      = $FFDF
 //
-// External interface.
-//
-struc t_conio
-    word keypressed
-    word getkey
-    word echo
-    word home
-    word gotoxy
-    word viewport
-    word texttype
-    word textmode
-    word grmode
-    word grcolor
-    word grplot
-    word tone
-    word rnd
-end
-//
 // Predefined functions.
 //
 predef a2keypressed,a2home,a12echo(state),a2gotoxy(x,y),a2viewport(left, top, width, height),a2texttype(type)

src/libsrc/apple/dgrlib.pla

@@ -492,39 +492,23 @@ asm _dgrFillTile
         RTS
 end
 //
-// Wait for VLB - Only IIe/IIGS.
+// Wait for VLB
 //
-asm vlbWait#0
+export asm dgrVLB#0
+        PHP
+        SEI
+        STA     $C079   ; Enable IOU access and reset VBL int on //c
+        STA     $C05B   ; Enable VBL int
 -       LDA     $C019
+        STA     $C079   ; Reset VBL int on //c
         BMI     -
 -       LDA     $C019
         BPL     -
+        STA     $C05A   ; Disable VBL int on //c
+        STA     $C078   ; Disable IOU access on //c
+        PLP
         RTS
 end
-// Wait for VBL on IIc is entirely different from others.
-// Setup, one-time *only* if polling will be used exclusively.
-// Otherwise requires restoring the mode on exit,
-// and setting up per-use instead.
-//   [php]
-//   sei         ; otherwise interrupt is still raised
-//   sta   $C07F ; enable access to VBL register
-//   sta   $C05B ; enable VBL polling
-//   sta   $C07E ; disable access to VBL register
-//
-// wait for VBL:
-// - bit   $C019
-//   bpl   -
-//   lda   $C070 ; $c019 bit 7 is sticky, reset it
-//
-// To allow other methods of VBL, restore access:
-// - bit   $C019
-//   bpl   -
-//   lda   $C070 ; $c019 bit 7 is sticky, reset it
-//   sta   $C07F ; enable access to VBL register
-//   sta   $C05A ; disable VBL polling
-//   sta   $C07E ; disable access to VBL register
-//   [plp]
-
 //
 // Clear the buffer
 //

src/libsrc/apple/fileio.pla

@@ -1,4 +1,5 @@
 include "inc/cmdsys.plh"
+include "inc/fileio.plh"
 //
 // CFFA1 addresses.
 //
@@ -22,26 +23,6 @@ const sysbuf = $0800
 //
 // External interface
 //
-struc t_fileio
-    word getpfx
-    word setpfx
-    word getfileinfo
-    word setfileinfo
-    word geteof
-    word seteof
-    word iobufalloc
-    word open
-    word close
-    word read
-    word write
-    word create
-    word destroy
-    word rename
-    word newline
-    word online
-    word readblock
-    word writeblock
-end
 predef a2getpfx(path), a23setpfx(path), a2getfileinfo(path, fileinfo), a2setfileinfo(path, fileinfo), a23geteof(refnum)#2, a23seteof(refnum, eofl, eofh), a2iobufs(iobufs), a2open(path), a2close(refnum)
 predef a23read(refnum, buf, len), a2write(refnum, buf, len), a2create(path, type, aux), a23destroy(path), a23rename(path, newpath)
 predef a2newline(refnum, emask, nlchar), a2online(unit, buf), a2readblock(unit, buf, block), a2writeblock(unit, buf, block)

src/libsrc/apple/grlib.pla

@@ -407,6 +407,28 @@ asm _grFillTile
         RTS
 end
 //
+// Wait for VLB
+//
+export asm grVLB#0
+        LDA     $BF98
+        AND     #$C0
+        CMP     #$80
+        BNE     +
+        PHP
+        SEI
+        STA     $C079   ; Enable IOU access and reset VBL int on //c
+        STA     $C05B   ; Enable VBL int
+-       LDA     $C019
+        STA     $C079   ; Reset VBL int on //c
+        BMI     -
+-       LDA     $C019
+        BPL     -
+        STA     $C05A   ; Disable VBL int on //c
+        STA     $C078   ; Disable IOU access on //c
+        PLP
++       RTS
+end
+//
 // Clear the buffer
 //
 export def grClear(clr)#0
@@ -458,6 +480,7 @@ export def grShow(page)#1
     return page ^ 1
 end
 export def grSwap#0
+    //vlbWait
     ^(showpage1 + drawpage)
     drawpage   = drawpage ^ 1
     drawbuff = grbuff[drawpage]

src/libsrc/fiber.pla

@@ -19,6 +19,7 @@ byte fbrNext[MAX_FIBERS]
 word fbrVMState[MAX_FIBERS]
 word fbrPool
 byte fbrRunning = 0
+export byte fbrCount = 0
 //
 // Zero Page VM state and 6502 stack
 //
@@ -136,6 +137,7 @@ export def fbrInit(numPool)
     else
         return -1
     fin
+    fbrCount = 1
     return 0
 end
 //
@@ -151,6 +153,7 @@ export def fbrStop(fid)#0
         //
         // Remove fiber from RUN list and tag as free
         //
+        fbrCount--
         fbrState[fid] = FIBER_FREE
         i = 0
         while fbrNext[i] <> fid
@@ -212,6 +215,7 @@ export def fbrStart(defaddr, param)
             //
             // Return fiber ID (index)
             //
+            fbrCount++
             return i
         fin
     next

src/libsrc/fpstr.pla

@@ -3,6 +3,7 @@
 //
 include "inc/cmdsys.plh"
 include "inc/sane.plh"
+include "inc/fpstr.plh"
 //
 // Structures for DEC2BIN, BIN2DEC
 //
@@ -19,14 +20,13 @@ end
 // Parse string into decrecord, return SANE conversion output
 //
 export def str2ext(str, ext)
-    byte i, s, d
+    byte i, d
     byte decrec[t_decrecord]
     word sgnadj, expadj
 
     decrec:sgn  = 0
     decrec:exp  = 0
     decrec.sig  = 0
-    s           = 1
     i           = 1
     //
     // Skip whitespace
@@ -51,27 +51,34 @@ export def str2ext(str, ext)
     // Parse number
     //
     while i <= ^str
-        d = toupper(^(str+i))
+        d = ^(str+i)
         if d >= '0' and d <= '9'
             //
             // Parse digit
             //
-            decrec.sig[s] = ^(str+i)
             decrec:sig++
-            s++
+            decrec.sig[decrec.sig] = d
         elsif d == '.'
             //
             // Parse decimal point
             //
             i++
-            while i <= ^str
+            if !decrec:exp
-                d = toupper(^(str+i))
+                //
-                if d >= '0' and d <= '9'
+                // Skip leading zeros
-                    decrec.sig[s] = ^(str+i)
+                //
-                    decrec.sig++
+                while i <= ^str and ^(str+i) == '0'
                     decrec:exp--
-                    s++
+                    i++
-                elsif d == 'E'
+                loop
+            fin
+            while i <= ^str
+                d = ^(str+i)
+                if d >= '0' and d <= '9'
+                    decrec.sig++
+                    decrec.sig[decrec.sig] = d
+                    decrec:exp--
+                elsif d == 'E' or d == 'e'
                     i--
                     break
                 else
@@ -79,7 +86,7 @@ export def str2ext(str, ext)
                 fin
                 i++
             loop
-        elsif d == 'E'
+        elsif d == 'E' or d == 'e'
             //
             // Parse exponent
             //
@@ -108,21 +115,20 @@ export def str2ext(str, ext)
         i++
     loop
     //
-    // Strip leading zeros from sig
+    // Strip trailing zeros from sig
     //
-    while decrec.sig > 1 and decrec.sig.1 == '0'
+    while decrec.sig > 0 and decrec.sig[decrec.sig] == '0'
         decrec.sig--
-        if decrec:exp < 0
+        decrec:exp++
-            decrec:exp--
-        fin
-        memcpy(@decrec.sig.1, @decrec.sig.2, decrec.sig)
     loop
     //
     // Check for zero
     //
     if !decrec.sig
-        decrec.sig = 1
+        decrec.sig   = 1
         decrec.sig.1 = '0'
+        decrec:sgn   = 0
+        decrec:exp   = 0
     fin
     sane:saveZP()
     return sane:restoreZP(sane:op2FP(FFEXT|FOD2B, ext, @decrec))
@@ -131,14 +137,15 @@ end
 // Convert extended FP to string using , return string
 //
 export def ext2str(ext, str, intdigits, fracdigits, format)
-    byte d, i, sigdigits, numdigits
+    byte d, numdigits
-    word dp, tens
+    word istr, dp, tens
     byte decform[t_decformat]
     byte decrec[t_decrecord]
 
-    numdigits = intdigits + fracdigits
+    numdigits      = intdigits + fracdigits
-    decform:style  = format & $01
+    decform:style  = format & FPSTR_FIXED
     decform:digits = decform:style ?? fracdigits :: numdigits
+    decrec:exp     = 0
     sane:saveZP()
     sane:restoreZP(sane:op3FP(FFEXT|FOB2D, @decrec, ext, @decform))
     ^(str+1) = decrec.sgn ?? '-' :: ' '
@@ -156,93 +163,110 @@ export def ext2str(ext, str, intdigits, fracdigits, format)
         ^str     = 4
         return str
     fin
-    if decrec.sig.1 == '0'
-        while decrec.sig < fracdigits
-            decrec.sig++
-            decrec.sig[decrec.sig] = '0'
-        loop
-        decrec:exp = -decrec.sig
-    fin
     dp = decrec.sig + decrec:exp
-    sigdigits = decrec.sig
+    if format & FPSTR_EXP
-    if decrec:exp < 0 and format & $02
+        if format & FPSTR_STRIP
-        //
+            //
-        // Strip off trailing fractional zeros
+            // Strip off trailing fractional zeros
-        //
+            //
-        while sigdigits > dp and decrec.sig[sigdigits] == '0'
+            while decrec.sig > 1 and decrec.sig[decrec.sig] == '0'
-            sigdigits--
+                decrec.sig--
-            decrec:exp++
+                decrec:exp++
-        loop
+            loop
-    fin
+        fin
-    if -decrec:exp > numdigits or sigdigits + decrec:exp >= (decform:style ?? intdigits :: numdigits) or format & $04
-        //
-        // Convert to exponential format
-        //
-        ^(str+2) = decrec.sig.1
-        ^(str+3) = '.'
-        i = 3
-        for d = 0 to fracdigits
-            i++
-            ^(str+i) = decrec.sig.2[d]
-        next
         //
         // Copy over all significant digits
         //
-        if ^(str+i) == '.'; i--; fin
+        ^(str+2) = decrec.sig.1
-        i++
+        ^(str+3) = '.'
-        ^(str+i) = 'E'
+        istr = str + 3
-        i++
+        for d = 2 to decrec.sig
+            istr++
+            ^istr = decrec.sig[d]
+        next
+        if ^istr == '.'; istr--; fin
+        //
+        // Print exponent as 4 digits with leading zeros
+        //
+        istr++
+        ^istr = 'E'
+        istr++
         dp--
         if dp < 0
-            ^(str+i) = '-'
+            ^istr = '-'
             dp = -dp
         else
-            ^(str+i) = '+'
+            ^istr = '+'
-            if dp == 0
-                i++
-                ^(str+i) = '0'
-            fin
         fin
-        //
+        tens = 1000
-        // Pretty output the exponent (preceding zero for values less than 10)
+        while tens
-        //
+            istr++
-        d    = 0
+            ^istr = (dp / tens) + '0'
-        tens = 10000
-        while dp
-            d = d or tens <= 10
-            if dp >= tens or d
-                d = 1
-                i++
-                ^(str+i) = (dp / tens) + '0'
-            fin
             dp = dp % tens
             tens = tens / 10
-            if !tens; break; fin
         loop
     else
+        if format & FPSTR_STRIP and decrec:exp < 0
+            //
+            // Strip off trailing fractional zeros
+            //
+            while decrec.sig > dp and decrec.sig[decrec.sig] == '0'
+                decrec.sig--
+                decrec:exp++
+            loop
+        fin
+        if decrec:sig == 1 | '0'<<8
+            //
+            // Case of zero or underflow
+            //
+            if decrec:exp == 0
+                //
+                // Zero
+                //
+                if format & FPSTR_FIXED
+                    //
+                    // Add trailing fractional zeros
+                    //
+                    dp = 1 - fracdigits
+                fin
+            elsif format & FPSTR_FLEX
+                //
+                // Underflow
+                //
+                dp = -fracdigits - 1
+            fin
+        fin
+        if format & FPSTR_FLEX and (dp < -fracdigits or dp > (format & FPSTR_FIXED ?? intdigits :: numdigits))
+            //
+            // Print as exponent if over/underflow fixed digits
+            //
+            if numdigits < 7; numdigits = 7; fin
+            return ext2str(ext, str, 1, numdigits - 7, FPSTR_EXP | (format & FPSTR_STRIP))
+        fin
         //
         // Convert as floating point
         //
-        i = 1
         if dp <= 0
             *(str+2) = '0'|('.'<<8)
-            i = 3
+            istr = str + 3
             while dp < 0
                 dp++
-                i++
+                istr++
-                ^(str+i) = '0'
+                ^istr = '0'
             loop
+        else
+            istr = str + 1
         fin
-        for d = 1 to sigdigits
+        for d = 1 to decrec.sig
-            i++
+            istr++
-            ^(str+i) = decrec.sig[d]
+            ^istr = decrec.sig[d]
             if d == dp
-                i++
+                istr++
-                ^(str+i) = '.'
+                ^istr = '.'
             fin
         next
-        if ^(str+i) == '.'; i--; fin
+        if ^istr == '.'; istr--; fin
     fin
-    ^str = i
+    ^str = istr - str
     return str
 end

src/libsrc/inet.pla

@@ -1,24 +1,5 @@
 include "inc/cmdsys.plh"
-//
+include "inc/inet.plh"
-// iNet API - must match inet.plh
-//
-struc t_inet
-    word initIP
-    word serviceIP
-    word openUDP
-    word sendUDP
-    word closeUDP
-    word listenTCP
-    word connectTCP
-    word sendTCP
-    word closeTCP
-    word setInterfaceIP
-    word getInterfaceHA
-    word setDNS
-    word resolveIP
-    word setCallback
-    word setParam
-end
 //
 // DNS message
 //

src/makefile

@@ -143,11 +143,11 @@ $(PLASM): $(OBJS) $(INCS)
 	cc $(OBJS) -o $(PLASM)
 
 $(PLASMAPLASM): toolsrc/plasm.pla toolsrc/lex.pla toolsrc/parse.pla toolsrc/codegen.pla toolsrc/codeseq.plh
-	./$(PLASM) -AMOW < toolsrc/plasm.pla > toolsrc/plasm.a
+	./$(PLASM) -AMOW toolsrc/plasm.pla
 	acme --setpc 4094 -o $(PLASMAPLASM) toolsrc/plasm.a
 
 $(CODEOPT): toolsrc/codeopt.pla toolsrc/codeseq.plh
-	./$(PLASM) -AMOW < toolsrc/codeopt.pla > toolsrc/codeopt.a
+	./$(PLASM) -AMOW toolsrc/codeopt.pla
 	acme --setpc 4094 -o $(CODEOPT) toolsrc/codeopt.a
 
 #
@@ -177,25 +177,25 @@ $(PLVMC64): vmsrc/c64/plvmc64.s vmsrc/c64/cmd.a
 	acme -f cbm -o $(PLVMC64) -l vmsrc/c64/plvmc64.sym vmsrc/c64/plvmc64.s
 
 vmsrc/apple/a1cmd.a: vmsrc/apple/a1cmd.pla $(PLASM)
-	./$(PLASM) -AOW < vmsrc/apple/a1cmd.pla > vmsrc/apple/a1cmd.a
+	./$(PLASM) -AOW vmsrc/apple/a1cmd.pla
 
 $(PLVM01): vmsrc/apple/plvm01.s vmsrc/apple/a1cmd.a
 	acme -o $(PLVM01) -l vmsrc/apple/plvm01.sym vmsrc/apple/plvm01.s
 
 $(CMD): vmsrc/apple/cmd.pla vmsrc/apple/cmdstub.s $(PLVM02) $(PLASM)
-	./$(PLASM) -AOW < vmsrc/apple/cmd.pla > vmsrc/apple/cmd.a
+	./$(PLASM) -AOW vmsrc/apple/cmd.pla
 	acme --setpc 8192 -o $(CMD) vmsrc/apple/cmdstub.s
 
 $(CMDJIT): vmsrc/apple/cmdjit.pla vmsrc/apple/cmdjitstub.s $(PLVMJIT) $(PLASM)
-	./$(PLASM) -AOW < vmsrc/apple/cmdjit.pla > vmsrc/apple/cmdjit.a
+	./$(PLASM) -AOW vmsrc/apple/cmdjit.pla
 	acme --setpc 8192 -o $(CMDJIT) vmsrc/apple/cmdjitstub.s
 
 $(SOSCMD): vmsrc/apple/soscmd.pla $(PLVM03) $(PLASM)
-	./$(PLASM) -AMOW < vmsrc/apple/soscmd.pla > vmsrc/apple/soscmd.a
+	./$(PLASM) -AMOW vmsrc/apple/soscmd.pla
 	acme --setpc 4094 -o $(SOSCMD) vmsrc/apple/soscmd.a
 
 $(SOSCMDJIT): vmsrc/apple/soscmdjit.pla libsrc/jitcore.pla $(PLVMJIT03) $(PLASM)
-	./$(PLASM) -AMOW < vmsrc/apple/soscmdjit.pla > vmsrc/apple/soscmdjit.a
+	./$(PLASM) -AMOW vmsrc/apple/soscmdjit.pla
 	acme --setpc 4094 -o $(SOSCMDJIT) vmsrc/apple/soscmdjit.a
 
 $(PLVM02): vmsrc/apple/plvm02.s
@@ -208,13 +208,13 @@ $(PLVM802): vmsrc/apple/plvm802.s
 	acme -o $(PLVM802) -l vmsrc/apple/plvm802.sym vmsrc/apple/plvm802.s
 
 vmsrc/apple/sossys.a: vmsrc/apple/sossys.pla $(PLASM)
-	./$(PLASM) -AOW < vmsrc/apple/sossys.pla > vmsrc/apple/sossys.a
+	./$(PLASM) -AOW vmsrc/apple/sossys.pla
 
 $(PLVM03): vmsrc/apple/plvm03.s vmsrc/apple/sossys.a
 	acme -o $(PLVM03) -l vmsrc/apple/plvm03.sym vmsrc/apple/plvm03.s
 
 vmsrc/apple/sossysjit.a: vmsrc/apple/sossysjit.pla $(PLASM)
-	./$(PLASM) -AOW < vmsrc/apple/sossysjit.pla > vmsrc/apple/sossysjit.a
+	./$(PLASM) -AOW vmsrc/apple/sossysjit.pla
 
 $(PLVMJIT03): vmsrc/apple/plvmjit03.s vmsrc/apple/sossysjit.a
 	acme -o $(PLVMJIT03) -l vmsrc/apple/plvmjit03.sym vmsrc/apple/plvmjit03.s
@@ -222,309 +222,309 @@ $(PLVMJIT03): vmsrc/apple/plvmjit03.s vmsrc/apple/sossysjit.a
 # Sample code
 #
 test:	samplesrc/test.pla samplesrc/testlib.pla $(PLVM) $(PLASM)
-	./$(PLASM) -AMOW  < samplesrc/test.pla > samplesrc/test.a
+	./$(PLASM) -AMOW samplesrc/test.pla
 	acme --setpc 4094 -o $(TEST) samplesrc/test.a
-	./$(PLASM) -AMOW  < samplesrc/testlib.pla > samplesrc/testlib.a
+	./$(PLASM) -AMOW samplesrc/testlib.pla
 	acme --setpc 4094 -o $(TESTLIB) samplesrc/testlib.a
 	./$(PLVM) TEST
 
 $(ED): toolsrc/ed.pla $(PLVM02) $(PLASM) toolsrc/ed.pla
-	./$(PLASM) -AMOW < toolsrc/ed.pla > toolsrc/ed.a
+	./$(PLASM) -AMOW toolsrc/ed.pla
 	acme --setpc 4094 -o $(ED) toolsrc/ed.a
 
 $(MATCHFILES): libsrc/apple/matchfiles.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/matchfiles.pla > libsrc/apple/matchfiles.a
+	./$(PLASM) -AMOW libsrc/apple/matchfiles.pla
 	acme --setpc 4094 -o $(MATCHFILES) libsrc/apple/matchfiles.a
 
 $(ARGS): libsrc/args.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/args.pla > libsrc/args.a
+	./$(PLASM) -AMOW libsrc/args.pla
 	acme --setpc 4094 -o $(ARGS) libsrc/args.a
 
 $(MEMMGR): libsrc/memmgr.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/memmgr.pla > libsrc/memmgr.a
+	./$(PLASM) -AMOW libsrc/memmgr.pla
 	acme --setpc 4094 -o $(MEMMGR) libsrc/memmgr.a
 
 $(MEMTEST): samplesrc/memtest.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/memtest.pla > samplesrc/memtest.a
+	./$(PLASM) -AMOW samplesrc/memtest.pla
 	acme --setpc 4094 -o $(MEMTEST) samplesrc/memtest.a
 
 $(FIBER): libsrc/fiber.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/fiber.pla > libsrc/fiber.a
+	./$(PLASM) -AMOW libsrc/fiber.pla
 	acme --setpc 4094 -o $(FIBER) libsrc/fiber.a
 
 $(LINES): libsrc/lines.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/lines.pla > libsrc/lines.a
+	./$(PLASM) -AMOW libsrc/lines.pla
 	acme --setpc 4094 -o $(LINES) libsrc/lines.a
 
 $(FIBERTEST): samplesrc/fibertest.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fibertest.pla > samplesrc/fibertest.a
+	./$(PLASM) -AMOW samplesrc/fibertest.pla
 	acme --setpc 4094 -o $(FIBERTEST) samplesrc/fibertest.a
 
 $(LONGJMP): libsrc/longjmp.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/longjmp.pla > libsrc/longjmp.a
+	./$(PLASM) -AMOW libsrc/longjmp.pla
 	acme --setpc 4094 -o $(LONGJMP) libsrc/longjmp.a
 
 $(SFM): samplesrc/sfm.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/sfm.pla > samplesrc/sfm.a
+	./$(PLASM) -AMOW samplesrc/sfm.pla
 	acme --setpc 4094 -o $(SFM) samplesrc/sfm.a
 
 $(SFMSPRT): samplesrc/sfmsprt.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/sfmsprt.pla > samplesrc/sfmsprt.a
+	./$(PLASM) -AMOW samplesrc/sfmsprt.pla
 	acme --setpc 4094 -o $(SFMSPRT) samplesrc/sfmsprt.a
 
 $(ROGUE): samplesrc/rogue.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/rogue.pla > samplesrc/rogue.a
+	./$(PLASM) -AMOW samplesrc/rogue.pla
 	acme --setpc 4094 -o $(ROGUE) samplesrc/rogue.a
 
 $(ROGUECOMBAT): samplesrc/rogue.combat.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/rogue.combat.pla > samplesrc/rogue.combat.a
+	./$(PLASM) -AMOW samplesrc/rogue.combat.pla
 	acme --setpc 4094 -o $(ROGUECOMBAT) samplesrc/rogue.combat.a
 
 $(ROGUEMAP): samplesrc/rogue.map.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/rogue.map.pla > samplesrc/rogue.map.a
+	./$(PLASM) -AMOW samplesrc/rogue.map.pla
 	acme --setpc 4094 -o $(ROGUEMAP) samplesrc/rogue.map.a
 
 hello:	samplesrc/hello.pla $(PLVM) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/hello.pla > samplesrc/hello.a
+	./$(PLASM) -AMOW samplesrc/hello.pla
 	acme --setpc 4094 -o $(HELLO) samplesrc/hello.a
 	./$(PLVM) HELLO
 
 $(CONIOTST): samplesrc/coniotst.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/coniotst.pla > samplesrc/coniotst.a
+	./$(PLASM) -AMOW samplesrc/coniotst.pla
 	acme --setpc 4094 -o $(CONIOTST) samplesrc/coniotst.a
 
 $(ROD): samplesrc/rod.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/rod.pla > samplesrc/rod.a
+	./$(PLASM) -AMOW samplesrc/rod.pla
 	acme --setpc 4094 -o $(ROD) samplesrc/rod.a
 
 $(SIEVE): samplesrc/sieve.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMW < samplesrc/sieve.pla > samplesrc/sieve.a
+	./$(PLASM) -AMW samplesrc/sieve.pla
 	acme --setpc 4094 -o $(SIEVE) samplesrc/sieve.a
 
 $(PRIMEGAP): samplesrc/primegap.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMW < samplesrc/primegap.pla > samplesrc/primegap.a
+	./$(PLASM) -AMW samplesrc/primegap.pla
 	acme --setpc 4094 -o $(PRIMEGAP) samplesrc/primegap.a
 
 $(INT32): libsrc/int32.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/int32.pla > libsrc/int32.a
+	./$(PLASM) -AMOW libsrc/int32.pla
 	acme --setpc 4094 -o $(INT32) libsrc/int32.a
 
 $(INT32TEST): samplesrc/int32test.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/int32test.pla > samplesrc/int32test.a
+	./$(PLASM) -AMOW samplesrc/int32test.pla
 	acme --setpc 4094 -o $(INT32TEST) samplesrc/int32test.a
 
 $(SANE): libsrc/sane.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/sane.pla > libsrc/sane.a
+	./$(PLASM) -AMOW libsrc/sane.pla
 	acme --setpc 4094 -o $(SANE) libsrc/sane.a
 
 $(FPSTR): libsrc/fpstr.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/fpstr.pla > libsrc/fpstr.a
+	./$(PLASM) -AMOW libsrc/fpstr.pla
 	acme --setpc 4094 -o $(FPSTR) libsrc/fpstr.a
 
 $(FPU): libsrc/fpu.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/fpu.pla > libsrc/fpu.a
+	./$(PLASM) -AMOW libsrc/fpu.pla
 	acme --setpc 4094 -o $(FPU) libsrc/fpu.a
 
 $(SANITY): samplesrc/sanity.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/sanity.pla > samplesrc/sanity.a
+	./$(PLASM) -AMOW samplesrc/sanity.pla
 	acme --setpc 4094 -o $(SANITY) samplesrc/sanity.a
 
 $(LZ4): libsrc/lz4.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/lz4.pla > libsrc/lz4.a
+	./$(PLASM) -AMOW libsrc/lz4.pla
 	acme --setpc 4094 -o $(LZ4) libsrc/lz4.a
 
 $(LZ4CAT): samplesrc/lz4cat.pla inc/lz4.plh $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/lz4cat.pla > samplesrc/lz4cat.a
+	./$(PLASM) -AMOW samplesrc/lz4cat.pla
 	acme --setpc 4094 -o $(LZ4CAT) samplesrc/lz4cat.a
 
 $(RPNCALC): samplesrc/rpncalc.pla libsrc/fpu.pla inc/fpu.plh libsrc/fpstr.pla inc/fpstr.plh inc/conio.plh $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/rpncalc.pla > samplesrc/rpncalc.a
+	./$(PLASM) -AMOW samplesrc/rpncalc.pla
 	acme --setpc 4094 -o $(RPNCALC) samplesrc/rpncalc.a
 
 $(ETHERIP): libsrc/etherip.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/etherip.pla > libsrc/etherip.a
+	./$(PLASM) -AMOW libsrc/etherip.pla
 	acme --setpc 4094 -o $(ETHERIP) libsrc/etherip.a
 
 $(INET): libsrc/inet.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/inet.pla > libsrc/inet.a
+	./$(PLASM) -AMOW libsrc/inet.pla
 	acme --setpc 4094 -o $(INET) libsrc/inet.a
 
 $(DHCP): libsrc/dhcp.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/dhcp.pla > libsrc/dhcp.a
+	./$(PLASM) -AMOW libsrc/dhcp.pla
 	acme --setpc 4094 -o $(DHCP) libsrc/dhcp.a
 
 $(HTTPD): samplesrc/httpd.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/httpd.pla > samplesrc/httpd.a
+	./$(PLASM) -AMOW samplesrc/httpd.pla
 	acme --setpc 4094 -o $(HTTPD) samplesrc/httpd.a
 
 $(TFTPD): utilsrc/tftpd.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/tftpd.pla > utilsrc/tftpd.a
+	./$(PLASM) -AMOW utilsrc/tftpd.pla
 	acme --setpc 4094 -o $(TFTPD) utilsrc/tftpd.a
 
 $(MOUSE): libsrc/apple/mouse.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/mouse.pla > libsrc/apple/mouse.a
+	./$(PLASM) -AMOW libsrc/apple/mouse.pla
 	acme --setpc 4094 -o $(MOUSE) libsrc/apple/mouse.a
 
 $(UTHERNET): libsrc/apple/uthernet.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/uthernet.pla > libsrc/apple/uthernet.a
+	./$(PLASM) -AMOW libsrc/apple/uthernet.pla
 	acme --setpc 4094 -o $(UTHERNET) libsrc/apple/uthernet.a
 
 $(UTHERNET2): libsrc/apple/uthernet2.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/uthernet2.pla > libsrc/apple/uthernet2.a
+	./$(PLASM) -AMOW libsrc/apple/uthernet2.pla
 	acme --setpc 4094 -o $(UTHERNET2) libsrc/apple/uthernet2.a
 
 $(FILEIO_APL): libsrc/apple/fileio.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/fileio.pla > libsrc/apple/fileio.a
+	./$(PLASM) -AMOW libsrc/apple/fileio.pla
 	acme --setpc 4094 -o $(FILEIO_APL) libsrc/apple/fileio.a
 
 $(CONIO_APL): libsrc/apple/conio.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/conio.pla > libsrc/apple/conio.a
+	./$(PLASM) -AMOW libsrc/apple/conio.pla
 	acme --setpc 4094 -o $(CONIO_APL) libsrc/apple/conio.a
 
 $(FILEIO_C64): libsrc/c64/fileio.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/c64/fileio.pla > libsrc/c64/fileio.a
+	./$(PLASM) -AMOW libsrc/c64/fileio.pla
 	acme --setpc 4094 -o $(FILEIO_C64) libsrc/c64/fileio.a
 
 $(CONIO_C64): libsrc/c64/conio.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/c64/conio.pla > libsrc/c64/conio.a
+	./$(PLASM) -AMOW libsrc/c64/conio.pla
 	acme --setpc 4094 -o $(CONIO_C64) libsrc/c64/conio.a
 
 $(SNDSEQ): libsrc/apple/sndseq.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/sndseq.pla > libsrc/apple/sndseq.a
+	./$(PLASM) -AMOW libsrc/apple/sndseq.pla
 	acme --setpc 4094 -o $(SNDSEQ) libsrc/apple/sndseq.a
 
 $(PLAYSEQ): samplesrc/playseq.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/playseq.pla > samplesrc/playseq.a
+	./$(PLASM) -AMOW samplesrc/playseq.pla
 	acme --setpc 4094 -o $(PLAYSEQ) samplesrc/playseq.a
 
 $(GRAFIX): libsrc/apple/grafix.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/grafix.pla > libsrc/apple/grafix.a
+	./$(PLASM) -AMOW libsrc/apple/grafix.pla
 	acme --setpc 4094 -o $(GRAFIX) libsrc/apple/grafix.a
 
 $(GFXDEMO): samplesrc/gfxdemo.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/gfxdemo.pla > samplesrc/gfxdemo.a
+	./$(PLASM) -AMOW samplesrc/gfxdemo.pla
 	acme --setpc 4094 -o $(GFXDEMO) samplesrc/gfxdemo.a
 
 $(FATCAT): samplesrc/fatcat.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fatcat.pla > samplesrc/fatcat.a
+	./$(PLASM) -AMOW samplesrc/fatcat.pla
 	acme --setpc 4094 -o $(FATCAT) samplesrc/fatcat.a
 
 $(FATGET): samplesrc/fatget.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fatget.pla > samplesrc/fatget.a
+	./$(PLASM) -AMOW samplesrc/fatget.pla
 	acme --setpc 4094 -o $(FATGET) samplesrc/fatget.a
 
 $(FATPUT): samplesrc/fatput.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fatput.pla > samplesrc/fatput.a
+	./$(PLASM) -AMOW samplesrc/fatput.pla
 	acme --setpc 4094 -o $(FATPUT) samplesrc/fatput.a
 
 $(FATWDSK): samplesrc/fatwritedsk.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fatwritedsk.pla > samplesrc/fatwritedsk.a
+	./$(PLASM) -AMOW samplesrc/fatwritedsk.pla
 	acme --setpc 4094 -o $(FATWDSK) samplesrc/fatwritedsk.a
 
 $(FATRDSK): samplesrc/fatreaddsk.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/fatreaddsk.pla > samplesrc/fatreaddsk.a
+	./$(PLASM) -AMOW samplesrc/fatreaddsk.pla
 	acme --setpc 4094 -o $(FATRDSK) samplesrc/fatreaddsk.a
 
 $(SDFAT): libsrc/apple/sdfat.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/sdfat.pla > libsrc/apple/sdfat.a
+	./$(PLASM) -AMOW libsrc/apple/sdfat.pla
 	acme --setpc 4094 -o $(SDFAT) libsrc/apple/sdfat.a
 
 $(SPIPORT): libsrc/apple/spiport.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/spiport.pla > libsrc/apple/spiport.a
+	./$(PLASM) -AMOW libsrc/apple/spiport.pla
 	acme --setpc 4094 -o $(SPIPORT) libsrc/apple/spiport.a
 
 $(JOYBUZZ): libsrc/apple/joybuzz.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/joybuzz.pla > libsrc/apple/joybuzz.a
+	./$(PLASM) -AMOW libsrc/apple/joybuzz.pla
 	acme --setpc 4094 -o $(JOYBUZZ) libsrc/apple/joybuzz.a
 
 $(PORTIO): libsrc/apple/portio.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/portio.pla > libsrc/apple/portio.a
+	./$(PLASM) -AMOW libsrc/apple/portio.pla
 	acme --setpc 4094 -o $(PORTIO) libsrc/apple/portio.a
 
 $(HGRLIB): libsrc/apple/hgrlib.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/hgrlib.pla > libsrc/apple/hgrlib.a
+	./$(PLASM) -AMOW libsrc/apple/hgrlib.pla
 	acme --setpc 4094 -o $(HGRLIB) libsrc/apple/hgrlib.a
 
 $(GRLIB): libsrc/apple/grlib.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/grlib.pla > libsrc/apple/grlib.a
+	./$(PLASM) -AMOW libsrc/apple/grlib.pla
 	acme --setpc 4094 -o $(GRLIB) libsrc/apple/grlib.a
 
 $(DGRLIB): libsrc/apple/dgrlib.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/dgrlib.pla > libsrc/apple/dgrlib.a
+	./$(PLASM) -AMOW libsrc/apple/dgrlib.pla
 	acme --setpc 4094 -o $(DGRLIB) libsrc/apple/dgrlib.a
 
 $(TILETEST): samplesrc/tiletest.pla $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/tiletest.pla > samplesrc/tiletest.a
+	./$(PLASM) -AMOW samplesrc/tiletest.pla
 	acme --setpc 4094 -o $(TILETEST) samplesrc/tiletest.a
 
 $(HGRTILE): libsrc/apple/hgrtile.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/hgrtile.pla > libsrc/apple/hgrtile.a
+	./$(PLASM) -AMOW libsrc/apple/hgrtile.pla
 	acme --setpc 4094 -o $(HGRTILE) libsrc/apple/hgrtile.a
 
 $(HGRFONT): libsrc/apple/hgrfont.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/hgrfont.pla > libsrc/apple/hgrfont.a
+	./$(PLASM) -AMOW libsrc/apple/hgrfont.pla
 	acme --setpc 4094 -o $(HGRFONT) libsrc/apple/hgrfont.a
 
 $(HGRSPRITE): libsrc/apple/hgrsprite.pla $(PLVM02) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/hgrsprite.pla > libsrc/apple/hgrsprite.a
+	./$(PLASM) -AMOW libsrc/apple/hgrsprite.pla
 	acme --setpc 4094 -o $(HGRSPRITE) libsrc/apple/hgrsprite.a
 
 $(HGRTEST): samplesrc/hgrtest.pla $(HGRLIB) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/hgrtest.pla > samplesrc/hgrtest.a
+	./$(PLASM) -AMOW samplesrc/hgrtest.pla
 	acme --setpc 4094 -o $(HGRTEST) samplesrc/hgrtest.a
 
 $(GRTEST): samplesrc/grtest.pla $(GRLIB) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/grtest.pla > samplesrc/grtest.a
+	./$(PLASM) -AMOW samplesrc/grtest.pla
 	acme --setpc 4094 -o $(GRTEST) samplesrc/grtest.a
 
 $(DGRTEST): samplesrc/dgrtest.pla $(DGRLIB) $(PLASM)
-	./$(PLASM) -AMOW < samplesrc/dgrtest.pla > samplesrc/dgrtest.a
+	./$(PLASM) -AMOW samplesrc/dgrtest.pla
 	acme --setpc 4094 -o $(DGRTEST) samplesrc/dgrtest.a
 
 $(MON): utilsrc/apple/mon.pla $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/mon.pla > utilsrc/apple/mon.a
+	./$(PLASM) -AMOW utilsrc/apple/mon.pla
 	acme --setpc 4094 -o $(MON) utilsrc/apple/mon.a
 
 $(COPY): utilsrc/apple/copy.pla $(MATCHFILES) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/copy.pla > utilsrc/apple/copy.a
+	./$(PLASM) -AMOW utilsrc/apple/copy.pla
 	acme --setpc 4094 -o $(COPY) utilsrc/apple/copy.a
 
 $(DEL): utilsrc/apple/del.pla $(MATCHFILES) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/del.pla > utilsrc/apple/del.a
+	./$(PLASM) -AMOW utilsrc/apple/del.pla
 	acme --setpc 4094 -o $(DEL) utilsrc/apple/del.a
 
 $(REN): utilsrc/apple/ren.pla $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/ren.pla > utilsrc/apple/ren.a
+	./$(PLASM) -AMOW utilsrc/apple/ren.pla
 	acme --setpc 4094 -o $(REN) utilsrc/apple/ren.a
 
 $(CAT): utilsrc/apple/cat.pla $(MATCHFILES) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/cat.pla > utilsrc/apple/cat.a
+	./$(PLASM) -AMOW utilsrc/apple/cat.pla
 	acme --setpc 4094 -o $(CAT) utilsrc/apple/cat.a
 
 $(NEWDIR): utilsrc/apple/newdir.pla $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/newdir.pla > utilsrc/apple/newdir.a
+	./$(PLASM) -AMOW utilsrc/apple/newdir.pla
 	acme --setpc 4094 -o $(NEWDIR) utilsrc/apple/newdir.a
 
 $(TYPE): utilsrc/apple/type.pla $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/type.pla > utilsrc/apple/type.a
+	./$(PLASM) -AMOW utilsrc/apple/type.pla
 	acme --setpc 4094 -o $(TYPE) utilsrc/apple/type.a
 
 $(SOS): utilsrc/apple/sos.pla $(PLVM03) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/sos.pla > utilsrc/apple/sos.a
+	./$(PLASM) -AMOW utilsrc/apple/sos.pla
 	acme --setpc 4094 -o $(SOS) utilsrc/apple/sos.a
 
 $(ZIPCHIP): utilsrc/apple/zipchip.pla $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/zipchip.pla > utilsrc/apple/zipchip.a
+	./$(PLASM) -AMOW utilsrc/apple/zipchip.pla
 	acme --setpc 4094 -o $(ZIPCHIP) utilsrc/apple/zipchip.a
 
 $(JIT): libsrc/apple/jit.pla libsrc/jitcore.pla $(PLVMJIT) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/jit.pla > libsrc/apple/jit.a
+	./$(PLASM) -AMOW libsrc/apple/jit.pla
 	acme --setpc 4094 -o $(JIT) libsrc/apple/jit.a
 
 $(JIT16): libsrc/apple/jit16.pla libsrc/jit16core.pla $(PLVMJIT) $(PLASM)
-	./$(PLASM) -AMOW < libsrc/apple/jit16.pla > libsrc/apple/jit16.a
+	./$(PLASM) -AMOW libsrc/apple/jit16.pla
 	acme --setpc 4094 -o $(JIT16) libsrc/apple/jit16.a
 
 $(JITUNE): utilsrc/apple/jitune.pla $(PLVMJIT) $(PLASM)
-	./$(PLASM) -AMOW < utilsrc/apple/jitune.pla > utilsrc/apple/jitune.a
+	./$(PLASM) -AMOW utilsrc/apple/jitune.pla
 	acme --setpc 4094 -o $(JITUNE) utilsrc/apple/jitune.a

src/mkrel

@@ -130,6 +130,7 @@ cp rel/apple/CONIOTST#FE1000 prodos/demos/CONIOTST.REL
 cp rel/apple/ROD#FE1000      prodos/demos/ROD.REL
 cp rel/RPNCALC#FE1000        prodos/demos/RPNCALC.REL
 cp rel/LZ4CAT#FE1000         prodos/demos/LZ4CAT.REL
+cp ../doc/ROGUE.LZ4.BIN      prodos/demos/ROGUE.LZ4.BIN
 cp rel/PRIMEGAP#FE1000       prodos/demos/PRIMEGAP.REL
 
 mkdir prodos/demos/rogue
@@ -195,9 +196,10 @@ cp samplesrc/playseq.pla   prodos/bld/samples/PLAYSEQ.PLA.TXT
 cp samplesrc/rpncalc.pla   prodos/bld/samples/RPNCALC.PLA.TXT
 cp samplesrc/fatcat.pla    prodos/bld/samples/FATCAT.PLA.TXT
 cp samplesrc/gfxdemo.pla   prodos/bld/samples/GFXDEMO.PLA.TXT
-cp samplesrc/lz4cat.pla    prodos/bld/samples/Z4CAT.PLA.TXT
+cp samplesrc/lz4cat.pla    prodos/bld/samples/LZ4CAT.PLA.TXT
 cp samplesrc/sfm.pla       prodos/bld/samples/SFM.PLA.TXT
 cp samplesrc/sfmsprt.pla   prodos/bld/samples/SFMSPRT.PLA.TXT
+cp samplesrc/fppow.pla     prodos/bld/samples/FPPOW.PLA.TXT
 cp utilsrc/apple/mon.pla   prodos/bld/samples/MON.PLA.TXT
 cp utilsrc/apple/zipchip.pla prodos/bld/samples/ZIPCHIP.PLA.TXT
 

src/samplesrc/fibertest.pla

@@ -19,6 +19,5 @@ fbrInit(4)
 fbrStart(@fbrTest, 3)
 fbrStart(@fbrTest, 2)
 fbrStart(@fbrTest, 1)
-fbrYield; fbrYield; fbrYield; fbrYield
+while fbrCount > 1; fbrYield; loop
-
 done

src/samplesrc/fppow.pla

@@ -0,0 +1,44 @@
+include "inc/cmdsys.plh"
+include "inc/sane.plh"
+include "inc/fpstr.plh"
+
+var xT[t_extended]
+char sT[32]   // extra space
+byte str = "123456789.123456789"
+byte i
+
+// mul div
+def test(iM, iD)#0
+  sane:saveZP()
+  sane:op2FP(FFINT|FOMUL, @xT, @iM)
+  sane:op2FP(FFINT|FODIV, @xT, @iD)
+  sane:restoreZP(0)
+
+  putc('x')
+  if iM<10; putc(' '); fin
+  puti(iM); putc('/'); puti(iD)
+  if iD<10; putc(' '); fin
+  puts("=>")
+  ext2str(@xT,@sT,9,9,FPSTR_FLEX|FPSTR_FIXED) // fixed
+  puts(@sT); putc('[')
+  puti( sT); putc(']')
+  putln
+end
+
+puts("Float Format Text\n\n")
+sane:initFP()
+strcpy(@sT,@str); str2ext(@sT,@xT)
+puts("begin: ")
+puts(@sT); putc('[')
+puti( sT); putc(']')
+putln
+test(1,1)
+for i=1 to 10
+  test(32000,1)
+next
+strcpy(@sT,@str); str2ext(@sT,@xT)
+for i=1 to 10
+  test(1,2)
+next
+puts("Done\n")
+done

src/samplesrc/rpncalc.pla

@@ -5,7 +5,8 @@ include "inc/cmdsys.plh"
 include "inc/fpstr.plh"
 include "inc/fpu.plh"
 include "inc/conio.plh"
-const displayWidth = 16
+const displayWidth = 15
+const displayDefFix = 6
 const inputLen = displayWidth+1
 const ZEROSTR = $3001
 //
@@ -36,8 +37,8 @@ byte inputStr[32] = ""
 //
 // Display format state
 //
-byte displayFix = 6
+byte displayFix = displayDefFix
-byte displayInt = displayWidth - 7 //  - displayFix - 1
+byte displayInt = displayWidth - displayDefFix - 2
 //
 // Store/load memory
 //
@@ -152,9 +153,10 @@ def showStack#0
   byte strFP[displayWidth+1]
 
   for s = 0 to 3
-    fpu:storStr(@strFP, displayInt, displayFix, FPSTR_FIXED, s)
+    fpu:storStr(@strFP, displayInt, displayFix, FPSTR_FIXED|FPSTR_FLEX, s)
     conio:gotoxy(4, 5 - s)
-    repc(displayWidth - strFP - 1, ' ')
+    //repc(displayWidth - strFP - 1, ' ')
+    repc(displayWidth - strFP, ' ')
     puts(@strFP)
   next
 end
@@ -163,7 +165,7 @@ def showMem#0
   byte strFP[displayWidth+1]
 
   for m = 0 to 9
-    ext2str(@memory[m*t_fpureg], @strFP, displayInt, displayFix, FPSTR_FIXED)
+    ext2str(@memory[m*t_fpureg], @strFP, displayInt, displayFix, FPSTR_FIXED|FPSTR_FLEX)
     conio:gotoxy(23, 2 + m)
     repc(displayWidth - strFP - 1, ' ')
     puts(@strFP)
@@ -252,7 +254,7 @@ def delKey(pkey)#0
   showInput
 end
 def dropKey(pkey)#0
-  fpu:pullStr(@inputStr, displayInt, displayFix, FPSTR_STRIP|FPSTR_FLOAT)
+  fpu:pullStr(@inputStr, displayInt, displayFix, FPSTR_STRIP|FPSTR_FLOAT|FPSTR_FLEX)
   if inputStr.1 == ' '
     inputStr--
     memcpy(@inputStr.1, @inputStr.2, inputStr)
@@ -261,7 +263,7 @@ def dropKey(pkey)#0
   showStack
 end
 def copyKey(pkey)#0
-  fpu:storStr(@inputStr, displayInt, displayFix, FPSTR_STRIP|FPSTR_FLOAT, X_REG)
+  fpu:storStr(@inputStr, displayInt, displayFix, FPSTR_STRIP|FPSTR_FLOAT|FPSTR_FLEX, X_REG)
   if inputStr.1 == ' '
     inputStr--
     memcpy(@inputStr.1, @inputStr.2, inputStr)
@@ -380,7 +382,7 @@ def elemsKey(pkey)#0
     is 'L'
       fpu:log2X()
       break
-    is 'E'
+    is 'P'
       fpu:powEX()
       break
     is 'N'
@@ -403,7 +405,7 @@ def cmdKey(pkey)#0
   d = toupper(getc) - '0'
   if d >= 1 and d <= 9
     displayFix = d
-    displayInt = displayWidth - displayFix - 1
+    displayInt = displayWidth - displayFix - 2
   elsif d == 'Q' - '0'
     quit = TRUE
   fin
@@ -450,7 +452,7 @@ initInput
 showStack
 showMem
 showInput
-showStatus("Version 0.6")
+showStatus("Version 0.7")
 inputKey
 conio:gotoxy(0, 22)
 done

src/tftpbld

@@ -1,61 +1,61 @@
 #!/bin/bash
 
 # Build tools
-echo "BLD/PLASM";    atftp $1 --put -l rel/PLASM#FE1000   -r $2/BLD/PLASM#FE1000
+echo "BLD/PLASM";    atftp --option "disable windowsize" $1 --put -l rel/PLASM#FE1000   -r $2/BLD/PLASM#FE1000
-echo "BLD/CODEOPT";  atftp $1 --put -l rel/CODEOPT#FE1000 -r $2/BLD/CODEOPT#FE1000
+echo "BLD/CODEOPT";  atftp --option "disable windowsize" $1 --put -l rel/CODEOPT#FE1000 -r $2/BLD/CODEOPT#FE1000
 
 #Build incs
-echo "BLD/INC/ARGS.PLH";     atftp $1 --put -l inc/args.plh    -r $2/BLD/INC/ARGS.PLH#040000
+echo "BLD/INC/ARGS.PLH";     atftp --option "disable windowsize" $1 --put -l inc/args.plh    -r $2/BLD/INC/ARGS.PLH#040000
-echo "BLD/INC/MATCHFILES.PLH"; atftp $1 --put -l inc/matchfiles.plh -r $2/BLD/INC/MATCHFILES.PLH#040000
+echo "BLD/INC/MATCHFILES.PLH"; atftp --option "disable windowsize" $1 --put -l inc/matchfiles.plh -r $2/BLD/INC/MATCHFILES.PLH#040000
-echo "BLD/INC/CMDSYS.PLH";   atftp $1 --put -l inc/cmdsys.plh  -r $2/BLD/INC/CMDSYS.PLH#040000
+echo "BLD/INC/CMDSYS.PLH";   atftp --option "disable windowsize" $1 --put -l inc/cmdsys.plh  -r $2/BLD/INC/CMDSYS.PLH#040000
-echo "BLD/INC/CONIO.PLH";    atftp $1 --put -l inc/conio.plh   -r $2/BLD/INC/CONIO.PLH#040000
+echo "BLD/INC/CONIO.PLH";    atftp --option "disable windowsize" $1 --put -l inc/conio.plh   -r $2/BLD/INC/CONIO.PLH#040000
-echo "BLD/INC/LINES.PLH";    atftp $1 --put -l inc/lines.plh -r $2/BLD/INC/LINES.PLH#040000
+echo "BLD/INC/LINES.PLH";    atftp --option "disable windowsize" $1 --put -l inc/lines.plh -r $2/BLD/INC/LINES.PLH#040000
-echo "BLD/INC/HGRTILE.PLH";  atftp $1 --put -l inc/hgrtile.plh -r $2/BLD/INC/HGRTILE.PLH#040000
+echo "BLD/INC/HGRTILE.PLH";  atftp --option "disable windowsize" $1 --put -l inc/hgrtile.plh -r $2/BLD/INC/HGRTILE.PLH#040000
-echo "BLD/INC/HGRFONT.PLH";atftp $1 --put -l inc/hgrfont.plh -r $2/BLD/INC/HGRFONT.PLH#040000
+echo "BLD/INC/HGRFONT.PLH";  atftp --option "disable windowsize" $1 --put -l inc/hgrfont.plh -r $2/BLD/INC/HGRFONT.PLH#040000
-echo "BLD/INC/HGRSPRITE.PLH";atftp $1 --put -l inc/hgrsprite.plh -r $2/BLD/INC/HGRSPRITE.PLH#040000
+echo "BLD/INC/HGRSPRITE.PLH";atftp --option "disable windowsize" $1 --put -l inc/hgrsprite.plh -r $2/BLD/INC/HGRSPRITE.PLH#040000
-echo "BLD/INC/HGRLIB.PLH";   atftp $1 --put -l inc/hgrlib.plh   -r $2/BLD/INC/HGRLIB.PLH#040000
+echo "BLD/INC/HGRLIB.PLH";   atftp --option "disable windowsize" $1 --put -l inc/hgrlib.plh   -r $2/BLD/INC/HGRLIB.PLH#040000
-echo "BLD/INC/GRLIB.PLH";    atftp $1 --put -l inc/grlib.plh   -r $2/BLD/INC/GRLIB.PLH#040000
+echo "BLD/INC/GRLIB.PLH";    atftp --option "disable windowsize" $1 --put -l inc/grlib.plh   -r $2/BLD/INC/GRLIB.PLH#040000
-echo "BLD/INC/DGRLIB.PLH";   atftp $1 --put -l inc/dgrlib.plh  -r $2/BLD/INC/DGRLIB.PLH#040000
+echo "BLD/INC/DGRLIB.PLH";   atftp --option "disable windowsize" $1 --put -l inc/dgrlib.plh  -r $2/BLD/INC/DGRLIB.PLH#040000
-echo "BLD/INC/FIBER.PLH";    atftp $1 --put -l inc/fiber.plh   -r $2/BLD/INC/FIBER.PLH#040000
+echo "BLD/INC/FIBER.PLH";    atftp --option "disable windowsize" $1 --put -l inc/fiber.plh   -r $2/BLD/INC/FIBER.PLH#040000
-echo "BLD/INC/FILEIO.PLH";   atftp $1 --put -l inc/fileio.plh  -r $2/BLD/INC/FILEIO.PLH#040000
+echo "BLD/INC/FILEIO.PLH";   atftp --option "disable windowsize" $1 --put -l inc/fileio.plh  -r $2/BLD/INC/FILEIO.PLH#040000
-echo "BLD/INC/INT32.PLH";    atftp $1 --put -l inc/int32.plh   -r $2/BLD/INC/INT32.PLH#040000
+echo "BLD/INC/INT32.PLH";    atftp --option "disable windowsize" $1 --put -l inc/int32.plh   -r $2/BLD/INC/INT32.PLH#040000
-echo "BLD/INC/FPSTR.PLH";    atftp $1 --put -l inc/fpstr.plh   -r $2/BLD/INC/FPSTR.PLH#040000
+echo "BLD/INC/FPSTR.PLH";    atftp --option "disable windowsize" $1 --put -l inc/fpstr.plh   -r $2/BLD/INC/FPSTR.PLH#040000
-echo "BLD/INC/FPU.PLH";      atftp $1 --put -l inc/fpu.plh     -r $2/BLD/INC/FPU.PLH#040000
+echo "BLD/INC/FPU.PLH";      atftp --option "disable windowsize" $1 --put -l inc/fpu.plh     -r $2/BLD/INC/FPU.PLH#040000
-echo "BLD/INC/GRAFIX.PLH";   atftp $1 --put -l inc/grafix.plh  -r $2/BLD/INC/GRAFIX.PLH#040000
+echo "BLD/INC/GRAFIX.PLH";   atftp --option "disable windowsize" $1 --put -l inc/grafix.plh  -r $2/BLD/INC/GRAFIX.PLH#040000
-echo "BLD/INC/INET.PLH";     atftp $1 --put -l inc/inet.plh    -r $2/BLD/INC/INET.PLH#040000
+echo "BLD/INC/JOYBUZZ.PLH";  atftp --option "disable windowsize" $1 --put -l inc/joybuzz.plh -r $2/BLD/INC/JOYBUZZ.PLH#040000
-echo "BLD/INC/JOYBUZZ.PLH";  atftp $1 --put -l inc/joybuzz.plh -r $2/BLD/INC/JOYBUZZ.PLH#040000
+echo "BLD/INC/INET.PLH";     atftp --option "disable windowsize" $1 --put -l inc/inet.plh    -r $2/BLD/INC/INET.PLH#040000
-echo "BLD/INC/LONGJUMP.PLH"; atftp $1 --put -l inc/longjmp.plh -r $2/BLD/INC/LONGJUMP.PLH#040000
+echo "BLD/INC/LONGJUMP.PLH"; atftp --option "disable windowsize" $1 --put -l inc/longjmp.plh -r $2/BLD/INC/LONGJUMP.PLH#040000
-echo "BLD/INC/LZ4.PLH";      atftp $1 --put -l inc/lz4.plh     -r $2/BLD/INC/LZ4.PLH#040000
+echo "BLD/INC/LZ4.PLH";      atftp --option "disable windowsize" $1 --put -l inc/lz4.plh     -r $2/BLD/INC/LZ4.PLH#040000
-echo "BLD/INC/MEMMGR.PLH";   atftp $1 --put -l inc/memmgr.plh  -r $2/BLD/INC/MEMMGR.PLH#040000
+echo "BLD/INC/MEMMGR.PLH";   atftp --option "disable windowsize" $1 --put -l inc/memmgr.plh  -r $2/BLD/INC/MEMMGR.PLH#040000
-echo "BLD/INC/MOUSE.PLH";    atftp $1 --put -l inc/mouse.plh   -r $2/BLD/INC/MOUSE.PLH#040000
+echo "BLD/INC/MOUSE.PLH";    atftp --option "disable windowsize" $1 --put -l inc/mouse.plh   -r $2/BLD/INC/MOUSE.PLH#040000
-echo "BLD/INC/PORTIO.PLH";   atftp $1 --put -l inc/portio.plh  -r $2/BLD/INC/PORTIO.PLH#040000
+echo "BLD/INC/PORTIO.PLH";   atftp --option "disable windowsize" $1 --put -l inc/portio.plh  -r $2/BLD/INC/PORTIO.PLH#040000
-echo "BLD/INC/SANE.PLH";     atftp $1 --put -l inc/sane.plh    -r $2/BLD/INC/SANE.PLH#040000
+echo "BLD/INC/SANE.PLH";     atftp --option "disable windowsize" $1 --put -l inc/sane.plh    -r $2/BLD/INC/SANE.PLH#040000
-echo "BLD/INC/SDFAT.PLH";    atftp $1 --put -l inc/sdfat.plh   -r $2/BLD/INC/SDFAT.PLH#040000
+echo "BLD/INC/SDFAT.PLH";    atftp --option "disable windowsize" $1 --put -l inc/sdfat.plh   -r $2/BLD/INC/SDFAT.PLH#040000
-echo "BLD/INC/SNDSEQ.PLH";   atftp $1 --put -l inc/sndseq.plh  -r $2/BLD/INC/SNDSEQ.PLH#040000
+echo "BLD/INC/SNDSEQ.PLH";   atftp --option "disable windowsize" $1 --put -l inc/sndseq.plh  -r $2/BLD/INC/SNDSEQ.PLH#040000
-echo "BLD/INC/SPIPORT.PLH";  atftp $1 --put -l inc/spiport.plh -r $2/BLD/INC/SPIPORT.PLH#040000
+echo "BLD/INC/SPIPORT.PLH";  atftp --option "disable windowsize" $1 --put -l inc/spiport.plh -r $2/BLD/INC/SPIPORT.PLH#040000
-echo "BLD/INC/TESTLIB.PLH";  atftp $1 --put -l inc/testlib.plh -r $2/BLD/INC/TESTLIB.PLH#040000
+echo "BLD/INC/TESTLIB.PLH";  atftp --option "disable windowsize" $1 --put -l inc/testlib.plh -r $2/BLD/INC/TESTLIB.PLH#040000
 
 # Sample sources
-echo "BLD/SAMPLES/HELLO.PLA";     atftp $1 --put -l samplesrc/hello.pla     -r $2/BLD/SAMPLES/HELLO.PLA#040000
+echo "BLD/SAMPLES/HELLO.PLA";     atftp --option "disable windowsize" $1 --put -l samplesrc/hello.pla     -r $2/BLD/SAMPLES/HELLO.PLA#040000
-echo "BLD/SAMPLES/TESTLIB.PLA";   atftp $1 --put -l samplesrc/testlib.pla   -r $2/BLD/SAMPLES/TESTLIB.PLA#040000
+echo "BLD/SAMPLES/TESTLIB.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/testlib.pla   -r $2/BLD/SAMPLES/TESTLIB.PLA#040000
-echo "BLD/SAMPLES/TEST.PLA";      atftp $1 --put -l samplesrc/test.pla      -r $2/BLD/SAMPLES/TEST.PLA#040000
+echo "BLD/SAMPLES/TEST.PLA";      atftp --option "disable windowsize" $1 --put -l samplesrc/test.pla      -r $2/BLD/SAMPLES/TEST.PLA#040000
-echo "BLD/SAMPLES/FIBERTEST.PLA"; atftp $1 --put -l samplesrc/fibertest.pla -r $2/BLD/SAMPLES/FIBERTEST.PLA#040000
+echo "BLD/SAMPLES/MOUSETEST.PLA"; atftp --option "disable windowsize" $1 --put -l samplesrc/mousetest.pla -r $2/BLD/SAMPLES/MOUSETEST.PLA#040000
-echo "BLD/SAMPLES/MOUSETEST.PLA"; atftp $1 --put -l samplesrc/mousetest.pla -r $2/BLD/SAMPLES/MOUSETEST.PLA#040000
+echo "BLD/SAMPLES/FIBERTEST.PLA"; atftp --option "disable windowsize" $1 --put -l samplesrc/fibertest.pla -r $2/BLD/SAMPLES/FIBERTEST.PLA#040000
-echo "BLD/SAMPLES/ROD.PLA";       atftp $1 --put -l samplesrc/rod.pla       -r $2/BLD/SAMPLES/ROD.PLA#040000
+echo "BLD/SAMPLES/ROD.PLA";       atftp --option "disable windowsize" $1 --put -l samplesrc/rod.pla       -r $2/BLD/SAMPLES/ROD.PLA#040000
-echo "BLD/SAMPLES/INT32TEST.PLA"; atftp $1 --put -l samplesrc/int32test.pla -r $2/BLD/SAMPLES/INT32TEST.PLA#040000
+echo "BLD/SAMPLES/INT32TEST.PLA"; atftp --option "disable windowsize" $1 --put -l samplesrc/int32test.pla -r $2/BLD/SAMPLES/INT32TEST.PLA#040000
-echo "BLD/SAMPLES/HGRTEST.PLA";   atftp $1 --put -l samplesrc/hgrtest.pla    -r $2/BLD/SAMPLES/HGRTEST.PLA#040000
+echo "BLD/SAMPLES/HGRTEST.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/hgrtest.pla    -r $2/BLD/SAMPLES/HGRTEST.PLA#040000
-echo "BLD/SAMPLES/GRTEST.PLA";    atftp $1 --put -l samplesrc/grtest.pla    -r $2/BLD/SAMPLES/GRTEST.PLA#040000
+echo "BLD/SAMPLES/GRTEST.PLA";    atftp --option "disable windowsize" $1 --put -l samplesrc/grtest.pla    -r $2/BLD/SAMPLES/GRTEST.PLA#040000
-echo "BLD/SAMPLES/DGRTEST.PLA";   atftp $1 --put -l samplesrc/dgrtest.pla   -r $2/BLD/SAMPLES/DGRTEST.PLA#040000
+echo "BLD/SAMPLES/DGRTEST.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/dgrtest.pla   -r $2/BLD/SAMPLES/DGRTEST.PLA#040000
-echo "BLD/SAMPLES/TILETEST.PLA";  atftp $1 --put -l samplesrc/tiletest.pla   -r $2/BLD/SAMPLES/TILETEST.PLA#040000
+echo "BLD/SAMPLES/TILETEST.PLA";  atftp --option "disable windowsize" $1 --put -l samplesrc/tiletest.pla   -r $2/BLD/SAMPLES/TILETEST.PLA#040000
-echo "BLD/SAMPLES/HGRTEST.PLA";   atftp $1 --put -l samplesrc/hgrtest.pla   -r $2/BLD/SAMPLES/HGRTEST.PLA#040000
+echo "BLD/SAMPLES/HGRTEST.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/hgrtest.pla   -r $2/BLD/SAMPLES/HGRTEST.PLA#040000
-echo "BLD/SAMPLES/PLAYSEQ.PLA";   atftp $1 --put -l samplesrc/playseq.pla   -r $2/BLD/SAMPLES/PLAYSEQ.PLA#040000
+echo "BLD/SAMPLES/PLAYSEQ.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/playseq.pla   -r $2/BLD/SAMPLES/PLAYSEQ.PLA#040000
-echo "BLD/SAMPLES/RPNCALC.PLA";   atftp $1 --put -l samplesrc/rpncalc.pla   -r $2/BLD/SAMPLES/RPNCALC.PLA#040000
+echo "BLD/SAMPLES/RPNCALC.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/rpncalc.pla   -r $2/BLD/SAMPLES/RPNCALC.PLA#040000
-echo "BLD/SAMPLES/SIEVE.PLA";     atftp $1 --put -l samplesrc/sieve.pla     -r $2/BLD/SAMPLES/SIEVE.PLA#040000
+echo "BLD/SAMPLES/SIEVE.PLA";     atftp --option "disable windowsize" $1 --put -l samplesrc/sieve.pla     -r $2/BLD/SAMPLES/SIEVE.PLA#040000
-echo "BLD/SAMPLES/MEMTEST.PLA";   atftp $1 --put -l samplesrc/memtest.pla   -r $2/BLD/SAMPLES/MEMTEST.PLA#040000
+echo "BLD/SAMPLES/MEMTEST.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/memtest.pla   -r $2/BLD/SAMPLES/MEMTEST.PLA#040000
-echo "BLD/SAMPLES/FATCAT.PLA";    atftp $1 --put -l samplesrc/fatcat.pla    -r $2/BLD/SAMPLES/FATCAT.PLA#040000
+echo "BLD/SAMPLES/FATCAT.PLA";    atftp --option "disable windowsize" $1 --put -l samplesrc/fatcat.pla    -r $2/BLD/SAMPLES/FATCAT.PLA#040000
-echo "BLD/SAMPLES/GFXDEMO.PLA";   atftp $1 --put -l samplesrc/gfxdemo.pla   -r $2/BLD/SAMPLES/GFXDEMO.PLA#040000
+echo "BLD/SAMPLES/GFXDEMO.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/gfxdemo.pla   -r $2/BLD/SAMPLES/GFXDEMO.PLA#040000
-echo "BLD/SAMPLES/LZ4CAT.PLA";    atftp $1 --put -l samplesrc/lz4cat.pla    -r $2/BLD/SAMPLES/LZ4CAT.PLA#040000
+echo "BLD/SAMPLES/LZ4CAT.PLA";    atftp --option "disable windowsize" $1 --put -l samplesrc/lz4cat.pla    -r $2/BLD/SAMPLES/LZ4CAT.PLA#040000
-echo "BLD/SAMPLES/SFM.PLA";       atftp $1 --put -l samplesrc/sfm.pla       -r $2/BLD/SAMPLES/SFM.PLA#040000
+echo "BLD/SAMPLES/SFM.PLA";       atftp --option "disable windowsize" $1 --put -l samplesrc/sfm.pla       -r $2/BLD/SAMPLES/SFM.PLA#040000
-echo "BLD/SAMPLES/SFMSPRT.PLA";   atftp $1 --put -l samplesrc/sfmsprt.pla   -r $2/BLD/SAMPLES/SFMSPRT.PLA#040000
+echo "BLD/SAMPLES/SFMSPRT.PLA";   atftp --option "disable windowsize" $1 --put -l samplesrc/sfmsprt.pla   -r $2/BLD/SAMPLES/SFMSPRT.PLA#040000
-echo "BLD/SAMPLES/MON.PLA";       atftp $1 --put -l utilsrc/apple/mon.pla   -r $2/BLD/SAMPLES/MON.PLA#040000
+echo "BLD/SAMPLES/FPPOW.PLA";     atftp --option "disable windowsize" $1 --put -l samplesrc/fppow.pla     -r $2/BLD/SAMPLES/FPPOW.PLA#040000
-
+echo "BLD/SAMPLES/MON.PLA";       atftp --option "disable windowsize" $1 --put -l utilsrc/apple/mon.pla   -r $2/BLD/SAMPLES/MON.PLA#040000

src/tftpdemos

@@ -1,44 +1,44 @@
 #!/bin/bash
 
 # Demos
-echo "DEMOS/RPNCALC";             atftp $1 --put -l rel/RPNCALC#FE1000            -r $2/DEMOS/RPNCALC#FE1000
+echo "DEMOS/RPNCALC";             atftp --option "disable windowsize" $1 --put -l rel/RPNCALC#FE1000            -r $2/DEMOS/RPNCALC#FE1000
-echo "DEMOS/LZ4CAT";              atftp $1 --put -l rel/LZ4CAT#FE1000             -r $2/DEMOS/LZ4CAT#FE1000
+echo "DEMOS/LZ4CAT";              atftp --option "disable windowsize" $1 --put -l rel/LZ4CAT#FE1000             -r $2/DEMOS/LZ4CAT#FE1000
-echo "DEMOS/SIEVE";               atftp $1 --put -l rel/SIEVE#FE1000              -r $2/DEMOS/SIEVE#FE1000
+echo "DEMOS/SIEVE";               atftp --option "disable windowsize" $1 --put -l rel/SIEVE#FE1000              -r $2/DEMOS/SIEVE#FE1000
-echo "DEMOS/ROD";                 atftp $1 --put -l rel/apple/ROD#FE1000          -r $2/DEMOS/ROD#FE1000
+echo "DEMOS/ROGUE.LZ4";           atftp --option "disable windowsize" $1 --put -l ../doc/ROGUE.LZ4.BIN       -r $2/DEMOS/ROGUE.LZ4#061000
-echo "DEMOS/INT32TEST";           atftp $1 --put -l rel/INT32TEST#FE1000       -r $2/DEMOS/INT32TEST#FE1000
+echo "DEMOS/ROD";                 atftp --option "disable windowsize" $1 --put -l rel/apple/ROD#FE1000          -r $2/DEMOS/ROD#FE1000
+echo "DEMOS/INT32TEST";           atftp --option "disable windowsize" $1 --put -l rel/INT32TEST#FE1000       -r $2/DEMOS/INT32TEST#FE1000
 
 # Music demo
-echo "DEMOS/MUSIC/PLAYSEQ";       atftp $1 --put -l rel/apple/PLAYSEQ#FE1000      -r $2/DEMOS/MUSIC/PLAYSEQ#FE1000
+echo "DEMOS/MUSIC/PLAYSEQ";       atftp --option "disable windowsize" $1 --put -l rel/apple/PLAYSEQ#FE1000      -r $2/DEMOS/MUSIC/PLAYSEQ#FE1000
-                                  atftp $1 --put -l mockingboard/ultima3.seq      -r $2/DEMOS/MUSIC/ULTIMA3.SEQ#060000
+                                  atftp --option "disable windowsize" $1 --put -l mockingboard/ultima3.seq      -r $2/DEMOS/MUSIC/ULTIMA3.SEQ#060000
-                                  atftp $1 --put -l mockingboard/startrek.seq     -r $2/DEMOS/MUSIC/STARTREK.SEQ#060000
+                                  atftp --option "disable windowsize" $1 --put -l mockingboard/startrek.seq     -r $2/DEMOS/MUSIC/STARTREK.SEQ#060000
 
 # Rogue demo
-echo "DEMOS/ROGUE/ROGUE";         atftp $1 --put -l rel/ROGUE#FE1000              -r $2/DEMOS/ROGUE/ROGUE#FE1000
+echo "DEMOS/ROGUE/ROGUE";         atftp --option "disable windowsize" $1 --put -l rel/ROGUE#FE1000              -r $2/DEMOS/ROGUE/ROGUE#FE1000
-echo "DEMOS/ROGUE/ROGUEMAP";      atftp $1 --put -l rel/ROGUEMAP#FE1000           -r $2/DEMOS/ROGUE/ROGUEMAP#FE1000
+echo "DEMOS/ROGUE/ROGUEMAP";      atftp --option "disable windowsize" $1 --put -l rel/ROGUEMAP#FE1000           -r $2/DEMOS/ROGUE/ROGUEMAP#FE1000
-echo "DEMOS/ROGUE/ROGUECOMBAT";   atftp $1 --put -l rel/ROGUECOMBAT#FE1000        -r $2/DEMOS/ROGUE/ROGUECOMBAT#FE1000
+echo "DEMOS/ROGUE/ROGUECOMBAT";   atftp --option "disable windowsize" $1 --put -l rel/ROGUECOMBAT#FE1000        -r $2/DEMOS/ROGUE/ROGUECOMBAT#FE1000
-                                  atftp $1 --put -l samplesrc/LEVEL0#040000       -r $2/DEMOS/ROGUE/LEVEL0#040000
+                                  atftp --option "disable windowsize" $1 --put -l samplesrc/LEVEL0#040000       -r $2/DEMOS/ROGUE/LEVEL0#040000
-                                  atftp $1 --put -l samplesrc/LEVEL1#040000       -r $2/DEMOS/ROGUE/LEVEL1#040000
+                                  atftp --option "disable windowsize" $1 --put -l samplesrc/LEVEL1#040000       -r $2/DEMOS/ROGUE/LEVEL1#040000
 
 # Net demos
-echo "DEMOS/NET/HTTPD";           atftp $1 --put -l rel/HTTPD#FE1000              -r $2/DEMOS/NET/HTTPD#FE1000
+echo "DEMOS/NET/HTTPD";           atftp --option "disable windowsize" $1 --put -l rel/HTTPD#FE1000              -r $2/DEMOS/NET/HTTPD#FE1000
-                                  atftp $1 --put -l samplesrc/index.html          -r $2/DEMOS/NET/INDEX.HTML#040000
+                                  atftp --option "disable windowsize" $1 --put -l samplesrc/index.html          -r $2/DEMOS/NET/INDEX.HTML#040000
 
 # Apple 2 demos
-echo "DEMOS/APPLE2/TILETEST";            atftp $1 --put -l rel/apple/TILETEST#FE1000       -r $2/DEMOS/APPLE2/TILETEST#FE1000
+echo "DEMOS/APPLE2/TILETEST";            atftp --option "disable windowsize" $1 --put -l rel/apple/TILETEST#FE1000       -r $2/DEMOS/APPLE2/TILETEST#FE1000
-echo "DEMOS/APPLE2/HGRTEST";             atftp $1 --put -l rel/apple/HGRTEST#FE1000       -r $2/DEMOS/APPLE2/HGRTEST#FE1000
+echo "DEMOS/APPLE2/HGRTEST";             atftp --option "disable windowsize" $1 --put -l rel/apple/HGRTEST#FE1000       -r $2/DEMOS/APPLE2/HGRTEST#FE1000
-echo "DEMOS/APPLE2/GRTEST";              atftp $1 --put -l rel/apple/GRTEST#FE1000       -r $2/DEMOS/APPLE2/GRTEST#FE1000
+echo "DEMOS/APPLE2/GRTEST";              atftp --option "disable windowsize" $1 --put -l rel/apple/GRTEST#FE1000       -r $2/DEMOS/APPLE2/GRTEST#FE1000
-echo "DEMOS/APPLE2/DGRTEST";             atftp $1 --put -l rel/apple/DGRTEST#FE1000      -r $2/DEMOS/APPLE2/DGRTEST#FE1000
+echo "DEMOS/APPLE2/DGRTEST";             atftp --option "disable windowsize" $1 --put -l rel/apple/DGRTEST#FE1000      -r $2/DEMOS/APPLE2/DGRTEST#FE1000
 
 # Spiders from Mars
-echo "DEMOS/APPLE2/SPIDERS/SFM";         atftp $1 --put -l rel/apple/SFM#FE1000      -r $2/DEMOS/APPLE2/SPIDERS/SFM#FE1000
+echo "DEMOS/APPLE2/SPIDERS/SFM";         atftp --option "disable windowsize" $1 --put -l rel/apple/SFM#FE1000      -r $2/DEMOS/APPLE2/SPIDERS/SFM#FE1000
-echo "DEMOS/APPLE2/SPIDERS/SFMSPRT";     atftp $1 --put -l rel/apple/SFMSPRT#FE1000      -r $2/DEMOS/APPLE2/SPIDERS/SFMSPRT#FE1000
+echo "DEMOS/APPLE2/SPIDERS/SFMSPRT";     atftp --option "disable windowsize" $1 --put -l rel/apple/SFMSPRT#FE1000      -r $2/DEMOS/APPLE2/SPIDERS/SFMSPRT#FE1000
 
 # Arduino+SD card demos
-echo "DEMOS/APPLE2/SDUTILS/SPIPORT";     atftp $1 --put -l rel/apple/SPIPORT#FE1000      -r $2/DEMOS/APPLE2/SDUTILS/SPIPORT#FE1000
+echo "DEMOS/APPLE2/SDUTILS/SPIPORT";     atftp --option "disable windowsize" $1 --put -l rel/apple/SPIPORT#FE1000      -r $2/DEMOS/APPLE2/SDUTILS/SPIPORT#FE1000
-echo "DEMOS/APPLE2/SDUTILS/SDFAT";       atftp $1 --put -l rel/apple/SDFAT#FE1000        -r $2/DEMOS/APPLE2/SDUTILS/SDFAT#FE1000
+echo "DEMOS/APPLE2/SDUTILS/SDFAT";       atftp --option "disable windowsize" $1 --put -l rel/apple/SDFAT#FE1000        -r $2/DEMOS/APPLE2/SDUTILS/SDFAT#FE1000
-echo "DEMOS/APPLE2/SDUTILS/FATCAT";      atftp $1 --put -l rel/apple/FATCAT#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATCAT#FE1000
+echo "DEMOS/APPLE2/SDUTILS/FATCAT";      atftp --option "disable windowsize" $1 --put -l rel/apple/FATCAT#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATCAT#FE1000
-echo "DEMOS/APPLE2/SDUTILS/FATGET";      atftp $1 --put -l rel/apple/FATGET#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATGET#FE1000
+echo "DEMOS/APPLE2/SDUTILS/FATGET";      atftp --option "disable windowsize" $1 --put -l rel/apple/FATGET#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATGET#FE1000
-echo "DEMOS/APPLE2/SDUTILS/FATPUT";      atftp $1 --put -l rel/apple/FATPUT#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATPUT#FE1000
+echo "DEMOS/APPLE2/SDUTILS/FATPUT";      atftp --option "disable windowsize" $1 --put -l rel/apple/FATPUT#FE1000       -r $2/DEMOS/APPLE2/SDUTILS/FATPUT#FE1000
-echo "DEMOS/APPLE2/SDUTILS/FATREADDSK";  atftp $1 --put -l rel/apple/FATREADDSK#FE1000   -r $2/DEMOS/APPLE2/SDUTILS/FATREADDSK#FE1000
+echo "DEMOS/APPLE2/SDUTILS/FATREADDSK";  atftp --option "disable windowsize" $1 --put -l rel/apple/FATREADDSK#FE1000   -r $2/DEMOS/APPLE2/SDUTILS/FATREADDSK#FE1000
-echo "DEMOS/APPLE2/SDUTILS/FATWRITEDSK"; atftp $1 --put -l rel/apple/FATWRITEDSK#FE1000  -r $2/DEMOS/APPLE2/SDUTILS/FATWRITEDSK#FE1000
+echo "DEMOS/APPLE2/SDUTILS/FATWRITEDSK"; atftp --option "disable windowsize" $1 --put -l rel/apple/FATWRITEDSK#FE1000  -r $2/DEMOS/APPLE2/SDUTILS/FATWRITEDSK#FE1000
-

src/tftpsane

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 # SANE libraries
-echo "SYS/SANE";        atftp $1 --put -l rel/SANE#FE1000 -r $2/SYS/SANE#FE1000
+echo "SYS/SANE";        atftp --option "disable windowsize" $1 --put -l rel/SANE#FE1000 -r $2/SYS/SANE#FE1000
-echo "SYS/FPSTR";       atftp $1 --put -l rel/FPSTR#FE1000 -r $2/SYS/FPSTR#FE1000
+echo "SYS/FPSTR";       atftp --option "disable windowsize" $1 --put -l rel/FPSTR#FE1000 -r $2/SYS/FPSTR#FE1000
-echo "SYS/FPU";         atftp $1 --put -l rel/FPU#FE1000 -r $2/SYS/FPU#FE1000
+echo "SYS/FPU";         atftp --option "disable windowsize" $1 --put -l rel/FPU#FE1000 -r $2/SYS/FPU#FE1000
-echo "SYS/FP6502.CODE"; atftp $1 --put -l ../sysfiles/FP6502.CODE#060000 -r $2/SYS/FP6502.CODE#060000
+echo "SYS/FP6502.CODE"; atftp --option "disable windowsize" $1 --put -l ../sysfiles/FP6502.CODE#060000 -r $2/SYS/FP6502.CODE#060000
-echo "SYS/ELEMS.CODE";  atftp $1 --put -l ../sysfiles/ELEMS.CODE#060000 -r $2/SYS/ELEMS.CODE#060000
+echo "SYS/ELEMS.CODE";  atftp --option "disable windowsize" $1 --put -l ../sysfiles/ELEMS.CODE#060000 -r $2/SYS/ELEMS.CODE#060000

src/tftpsys

@@ -1,38 +1,38 @@
 #!/bin/bash
 
 # Core VM, CMDSYS, JITC files
-echo "PLASMA.SYSTEM"; atftp $1 --put -l rel/apple/PLASMA.SYSTEM#FF2000 -r $2/PLASMA.SYSTEM#FF2000
+echo "PLASMA.SYSTEM"; atftp --option "disable windowsize" $1 --put -l rel/apple/PLASMA.SYSTEM#FF2000 -r $2/PLASMA.SYSTEM#FF2000
-echo "PLVM.128";      atftp $1 --put -l rel/apple/PLVM.128#FF2000 -r $2/PLVM.128#FF2000
+echo "PLVM.128";      atftp --option "disable windowsize" $1 --put -l rel/apple/PLVM.128#FF2000 -r $2/PLVM.128#FF2000
-echo "PLVM16";        atftp $1 --put -l rel/apple/PLVM16#FF2000 -r $2/PLVM16#FF2000
+echo "PLVM16";        atftp --option "disable windowsize" $1 --put -l rel/apple/PLVM16#FF2000 -r $2/PLVM16#FF2000
-echo "CMD";           atftp $1 --put -l rel/apple/CMD#061000 -r $2/CMD#061000
+echo "CMD";           atftp --option "disable windowsize" $1 --put -l rel/apple/CMD#061000 -r $2/CMD#061000
-echo "CMD128";        atftp $1 --put -l rel/apple/CMD128#061000 -r $2/CMD128#061000
+echo "CMD128";        atftp --option "disable windowsize" $1 --put -l rel/apple/CMD128#061000 -r $2/CMD128#061000
-echo "SYS/JIT";       atftp $1 --put -l rel/apple/JIT#FE1000 -r $2/SYS/JIT#FE1000
+echo "SYS/JIT";       atftp --option "disable windowsize" $1 --put -l rel/apple/JIT#FE1000 -r $2/SYS/JIT#FE1000
-echo "SYS/JIT16";     atftp $1 --put -l rel/apple/JIT16#FE1000 -r $2/SYS/JIT16#FE1000
+echo "SYS/JIT16";     atftp --option "disable windowsize" $1 --put -l rel/apple/JIT16#FE1000 -r $2/SYS/JIT16#FE1000
-echo "SYS/JITUNE";    atftp $1 --put -l rel/apple/JITUNE#FE1000 -r $2/SYS/JITUNE#FE1000
+echo "SYS/JITUNE";    atftp --option "disable windowsize" $1 --put -l rel/apple/JITUNE#FE1000 -r $2/SYS/JITUNE#disable FE1000
 
 # Core libraries
-echo "SYS/MATCHFILES"; atftp $1 --put -l rel/apple/MATCHFILES#FE1000 -r $2/SYS/MATCHFILES#FE1000
+echo "SYS/MATCHFILES"; atftp --option "disable windowsize" $1 --put -l rel/apple/MATCHFILES#FE1000 -r $2/SYS/MATCHFILES#FE1000
-echo "SYS/ARGS";     atftp $1 --put -l rel/ARGS#FE1000 -r $2/SYS/ARGS#FE1000
+echo "SYS/ARGS";     atftp --option "disable windowsize" $1 --put -l rel/ARGS#FE1000 -r $2/SYS/ARGS#FE1000
-echo "SYS/INT32";    atftp $1 --put -l rel/INT32#FE1000 -r $2/SYS/INT32#FE1000
+echo "SYS/INT32";    atftp --option "disable windowsize" $1 --put -l rel/INT32#FE1000 -r $2/SYS/INT32#FE1000
-echo "SYS/DHCP";     atftp $1 --put -l rel/DHCP#FE1000 -r $2/SYS/DHCP#FE1000
+echo "SYS/DHCP";     atftp --option "disable windowsize" $1 --put -l rel/DHCP#FE1000 -r $2/SYS/DHCP#FE1000
-echo "SYS/ETHERIP";  atftp $1 --put -l rel/ETHERIP#FE1000 -r $2/SYS/ETHERIP#FE1000
+echo "SYS/ETHERIP";  atftp --option "disable windowsize" $1 --put -l rel/ETHERIP#FE1000 -r $2/SYS/ETHERIP#FE1000
-echo "SYS/MOUSE";    atftp $1 --put -l rel/apple/MOUSE#FE1000 -r $2/SYS/MOUSE#FE1000
+echo "SYS/MOUSE";    atftp --option "disable windowsize" $1 --put -l rel/apple/MOUSE#FE1000 -r $2/SYS/MOUSE#FE1000
-echo "SYS/FIBER";    atftp $1 --put -l rel/FIBER#FE1000 -r $2/SYS/FIBER#FE1000
+echo "SYS/FIBER";    atftp --option "disable windowsize" $1 --put -l rel/FIBER#FE1000 -r $2/SYS/FIBER#FE1000
-echo "SYS/INET";     atftp $1 --put -l rel/INET#FE1000 -r $2/SYS/INET#FE1000
+echo "SYS/INET";     atftp --option "disable windowsize" $1 --put -l rel/INET#FE1000 -r $2/SYS/INET#FE1000
-echo "SYS/LONGJUMP"; atftp $1 --put -l rel/LONGJMP#FE1000 -r $2/SYS/LONGJMP#FE1000
+echo "SYS/LONGJUMP"; atftp --option "disable windowsize" $1 --put -l rel/LONGJMP#FE1000 -r $2/SYS/LONGJMP#FE1000
-echo "SYS/MEMMGR";   atftp $1 --put -l rel/MEMMGR#FE1000 -r $2/SYS/MEMMGR#FE1000
+echo "SYS/MEMMGR";   atftp --option "disable windowsize" $1 --put -l rel/MEMMGR#FE1000 -r $2/SYS/MEMMGR#FE1000
-echo "SYS/LZ4";      atftp $1 --put -l rel/LZ4#FE1000 -r $2/SYS/LZ4#FE1000
+echo "SYS/LZ4";      atftp --option "disable windowsize" $1 --put -l rel/LZ4#FE1000 -r $2/SYS/LZ4#FE1000
-echo "SYS/CONIO";    atftp $1 --put -l rel/apple/CONIO#FE1000 -r $2/SYS/CONIO#FE1000
+echo "SYS/CONIO";    atftp --option "disable windowsize" $1 --put -l rel/apple/CONIO#FE1000 -r $2/SYS/CONIO#FE1000
-echo "SYS/HGRTILE";  atftp $1 --put -l rel/apple/HGRTILE#FE1000 -r $2/SYS/HGRTILE#FE1000
+echo "SYS/HGRTILE";  atftp --option "disable windowsize" $1 --put -l rel/apple/HGRTILE#FE1000 -r $2/SYS/HGRTILE#FE1000
-echo "SYS/HGRFONT";  atftp $1 --put -l rel/apple/HGRFONT#FE1000 -r $2/SYS/HGRFONT#FE1000
+echo "SYS/HGRFONT";  atftp --option "disable windowsize" $1 --put -l rel/apple/HGRFONT#FE1000 -r $2/SYS/HGRFONT#FE1000
-echo "SYS/HGRSPRITE"; atftp $1 --put -l rel/apple/HGRSPRITE#FE1000 -r $2/SYS/HGRSPRITE#FE1000
+echo "SYS/HGRSPRITE"; atftp --option "disable windowsize" $1 --put -l rel/apple/HGRSPRITE#FE1000 -r $2/SYS/HGRSPRITE#FE1000
-echo "SYS/LINES"; atftp $1 --put -l rel/LINES#FE1000 -r $2/SYS/LINES#FE1000
+echo "SYS/LINES";    atftp --option "disable windowsize" $1 --put -l rel/LINES#FE1000 -r $2/SYS/LINES#FE1000
-echo "SYS/HGRLIB";   atftp $1 --put -l rel/apple/HGRLIB#FE1000 -r $2/SYS/HGRLIB#FE1000
+echo "SYS/HGRLIB";   atftp --option "disable windowsize" $1 --put -l rel/apple/HGRLIB#FE1000 -r $2/SYS/HGRLIB#FE1000
-echo "SYS/GRLIB";    atftp $1 --put -l rel/apple/GRLIB#FE1000 -r $2/SYS/GRLIB#FE1000
+echo "SYS/GRLIB";    atftp --option "disable windowsize" $1 --put -l rel/apple/GRLIB#FE1000 -r $2/SYS/GRLIB#FE1000
-echo "SYS/DGRLIB";   atftp $1 --put -l rel/apple/DGRLIB#FE1000 -r $2/SYS/DGRLIB#FE1000
+echo "SYS/DGRLIB";   atftp --option "disable windowsize" $1 --put -l rel/apple/DGRLIB#FE1000 -r $2/SYS/DGRLIB#FE1000
-echo "SYS/FILEIO";   atftp $1 --put -l rel/apple/FILEIO#FE1000 -r $2/SYS/FILEIO#FE1000
+echo "SYS/FILEIO";   atftp --option "disable windowsize" $1 --put -l rel/apple/FILEIO#FE1000 -r $2/SYS/FILEIO#FE1000
-echo "SYS/JOYBUZZ";  atftp $1 --put -l rel/apple/JOYBUZZ#FE1000 -r $2/SYS/JOYBUZZ#FE1000
+echo "SYS/JOYBUZZ";  atftp --option "disable windowsize" $1 --put -l rel/apple/JOYBUZZ#FE1000 -r $2/SYS/JOYBUZZ#FE1000
-echo "SYS/SNDSEQ";   atftp $1 --put -l rel/apple/SNDSEQ#FE1000 -r $2/SYS/SNDSEQ#FE1000
+echo "SYS/SNDSEQ";   atftp --option "disable windowsize" $1 --put -l rel/apple/SNDSEQ#FE1000 -r $2/SYS/SNDSEQ#FE1000
-echo "SYS/PORTIO";   atftp $1 --put -l rel/apple/PORTIO#FE1000 -r $2/SYS/PORTIO#FE1000
+echo "SYS/PORTIO";   atftp --option "disable windowsize" $1 --put -l rel/apple/PORTIO#FE1000 -r $2/SYS/PORTIO#FE1000
-echo "SYS/UTHERNET2";atftp $1 --put -l rel/apple/UTHERNET2#FE1000 -r $2/SYS/UTHERNET2#FE1000
+echo "SYS/UTHERNET2";atftp --option "disable windowsize" $1 --put -l rel/apple/UTHERNET2#FE1000 -r $2/SYS/UTHERNET2#FE1000
-echo "SYS/UTHERNET"; atftp $1 --put -l rel/apple/UTHERNET#FE1000 -r $2/SYS/UTHERNET#FE1000
+echo "SYS/UTHERNET"; atftp --option "disable windowsize" $1 --put -l rel/apple/UTHERNET#FE1000 -r $2/SYS/UTHERNET#FE1000

src/tftputil

@@ -1,14 +1,14 @@
 #!/bin/bash
 
 # Core utilities
-echo "SYS/ED";       atftp $1 --put -l rel/ED#FE1000 -r $2/SYS/ED#FE1000
+echo "SYS/ED";       atftp --option "disable windowsize" $1 --put -l rel/ED#FE1000 -r $2/SYS/ED#FE1000
-echo "SYS/TFTPD";    atftp $1 --put -l rel/TFTPD#FE1000 -r $2/SYS/TFTPD#FE1000
+echo "SYS/TFTPD";    atftp --option "disable windowsize" $1 --put -l rel/TFTPD#FE1000 -r $2/SYS/TFTPD#FE1000
-echo "SYS/COPY";     atftp $1 --put -l rel/apple/COPY#FE1000 -r $2/SYS/COPY#FE1000
+echo "SYS/COPY";     atftp --option "disable windowsize" $1 --put -l rel/apple/COPY#FE1000 -r $2/SYS/COPY#FE1000
-echo "SYS/DEL";      atftp $1 --put -l rel/apple/DEL#FE1000 -r $2/SYS/DEL#FE1000
+echo "SYS/DEL";      atftp --option "disable windowsize" $1 --put -l rel/apple/DEL#FE1000 -r $2/SYS/DEL#FE1000
-echo "SYS/REN";      atftp $1 --put -l rel/apple/REN#FE1000 -r $2/SYS/REN#FE1000
+echo "SYS/REN";      atftp --option "disable windowsize" $1 --put -l rel/apple/REN#FE1000 -r $2/SYS/REN#FE1000
-echo "SYS/CAT";      atftp $1 --put -l rel/apple/CAT#FE1000 -r $2/SYS/CAT#FE1000
+echo "SYS/CAT";      atftp --option "disable windowsize" $1 --put -l rel/apple/CAT#FE1000 -r $2/SYS/CAT#FE1000
-echo "SYS/NEWDIR";   atftp $1 --put -l rel/apple/NEWDIR#FE1000 -r $2/SYS/NEWDIR#FE1000
+echo "SYS/NEWDIR";   atftp --option "disable windowsize" $1 --put -l rel/apple/NEWDIR#FE1000 -r $2/SYS/NEWDIR#FE1000
-echo "SYS/TYPE";     atftp $1 --put -l rel/apple/TYPE#FE1000 -r $2/SYS/TYPE#FE1000
+echo "SYS/TYPE";     atftp --option "disable windowsize" $1 --put -l rel/apple/TYPE#FE1000 -r $2/SYS/TYPE#FE1000
-echo "SYS/MON";      atftp $1 --put -l rel/apple/MON#FE1000 -r $2/SYS/MON#FE1000
+echo "SYS/MON";      atftp --option "disable windowsize" $1 --put -l rel/apple/MON#FE1000 -r $2/SYS/MON#FE1000
-echo "SYS/SOS";      atftp $1 --put -l rel/apple/SOS#FE1000 -r $2/SYS/SOS#FE1000
+echo "SYS/SOS";      atftp --option "disable windowsize" $1 --put -l rel/apple/SOS#FE1000 -r $2/SYS/SOS#FE1000
-echo "SYS/ZIPCHIP";  atftp $1 --put -l rel/apple/ZIPCHIP#FE1000 -r $2/SYS/ZIPCHIP#FE1000
+echo "SYS/ZIPCHIP";  atftp --option "disable windowsize" $1 --put -l rel/apple/ZIPCHIP#FE1000 -r $2/SYS/ZIPCHIP#FE1000

src/toolsrc/codegen.c

@@ -173,7 +173,7 @@ int idglobal_add(char *name, int len, int type, int size)
     }
     else
     {
-        printf("\t\t\t\t\t; %s -> X%03d\n", &idglobal_name[globals][1], externs);
+        fprintf(outputfile, "\t\t\t\t\t; %s -> X%03d\n", &idglobal_name[globals][1], externs);
         idglobal_tag[globals++] = externs++;
     }
     return (1);
@@ -219,7 +219,7 @@ int idfunc_add(char *name, int len, int type, int tag)
     idglobal_type[globals]  = type;
     idglobal_tag[globals++] = tag;
     if (type & EXTERN_TYPE)
-        printf("\t\t\t\t\t; %s -> X%03d\n", &idglobal_name[globals - 1][1], tag);
+        fprintf(outputfile, "\t\t\t\t\t; %s -> X%03d\n", &idglobal_name[globals - 1][1], tag);
     return (1);
 }
 int idfunc_set(char *name, int len, int type, int tag)
@@ -343,11 +343,11 @@ void emit_dci(char *str, int len)
 {
     if (len--)
     {
-        printf("\t; DCI STRING: %s\n", supper(str));
+        fprintf(outputfile, "\t; DCI STRING: %s\n", supper(str));
-        printf("\t%s\t$%02X", DB, toupper(*str++) | (len ? 0x80 : 0x00));
+        fprintf(outputfile, "\t%s\t$%02X", DB, toupper(*str++) | (len ? 0x80 : 0x00));
         while (len--)
-            printf(",$%02X", toupper(*str++) | (len ? 0x80 : 0x00));
+            fprintf(outputfile, ",$%02X", toupper(*str++) | (len ? 0x80 : 0x00));
-        printf("\n");
+        fprintf(outputfile, "\n");
     }
 }
 void emit_flags(int flags)
@@ -365,22 +365,22 @@ void emit_header(void)
     int i;
 
     if (outflags & ACME)
-        printf("; ACME COMPATIBLE OUTPUT\n");
+        fprintf(outputfile, "; ACME COMPATIBLE OUTPUT\n");
     else
-        printf("; CA65 COMPATIBLE OUTPUT\n");
+        fprintf(outputfile, "; CA65 COMPATIBLE OUTPUT\n");
     if (outflags & MODULE)
     {
-        printf("\t%s\t_SEGEND-_SEGBEGIN\t; LENGTH OF HEADER + CODE/DATA + BYTECODE SEGMENT\n", DW);
+        fprintf(outputfile, "\t%s\t_SEGEND-_SEGBEGIN\t; LENGTH OF HEADER + CODE/DATA + BYTECODE SEGMENT\n", DW);
-        printf("_SEGBEGIN%c\n", LBL);
+        fprintf(outputfile, "_SEGBEGIN%c\n", LBL);
-        printf("\t%s\t$6502\t\t\t; MAGIC #\n", DW);
+        fprintf(outputfile, "\t%s\t$6502\t\t\t; MAGIC #\n", DW);
-        printf("\t%s\t_SYSFLAGS\t\t\t; SYSTEM FLAGS\n", DW);
+        fprintf(outputfile, "\t%s\t_SYSFLAGS\t\t\t; SYSTEM FLAGS\n", DW);
-        printf("\t%s\t_SUBSEG\t\t\t; BYTECODE SUB-SEGMENT\n", DW);
+        fprintf(outputfile, "\t%s\t_SUBSEG\t\t\t; BYTECODE SUB-SEGMENT\n", DW);
-        printf("\t%s\t_DEFCNT\t\t\t; BYTECODE DEF COUNT\n", DW);
+        fprintf(outputfile, "\t%s\t_DEFCNT\t\t\t; BYTECODE DEF COUNT\n", DW);
-        printf("\t%s\t_INIT\t\t\t; MODULE INITIALIZATION ROUTINE\n", DW);
+        fprintf(outputfile, "\t%s\t_INIT\t\t\t; MODULE INITIALIZATION ROUTINE\n", DW);
     }
     else
     {
-        printf("\tJMP\t_INIT\t\t\t; MODULE INITIALIZATION ROUTINE\n");
+        fprintf(outputfile, "\tJMP\t_INIT\t\t\t; MODULE INITIALIZATION ROUTINE\n");
     }
     /*
      * Init free op sequence table
@@ -393,7 +393,7 @@ void emit_rld(void)
 {
     int i, j;
 
-    printf(";\n; RE-LOCATEABLE DICTIONARY\n;\n");
+    fprintf(outputfile, ";\n; RE-LOCATEABLE DICTIONARY\n;\n");
     /*
      * First emit the bytecode definition entrypoint information.
      */
@@ -409,9 +409,9 @@ void emit_rld(void)
     j = outflags & INIT ? defs - 1 : defs;
     for (i = 0; i < j; i++)
     {
-        printf("\t%s\t$02\t\t\t; CODE TABLE FIXUP\n", DB);
+        fprintf(outputfile, "\t%s\t$02\t\t\t; CODE TABLE FIXUP\n", DB);
-        printf("\t%s\t_C%03d\t\t\n", DW, i);
+        fprintf(outputfile, "\t%s\t_C%03d\t\t\n", DW, i);
-        printf("\t%s\t$00\n", DB);
+        fprintf(outputfile, "\t%s\t$00\n", DB);
     }
     /*
      * Now emit the fixup table.
@@ -420,53 +420,53 @@ void emit_rld(void)
     {
         if (fixup_type[i] & EXTERN_TYPE)
         {
-            printf("\t%s\t$%02X\t\t\t; EXTERNAL FIXUP\n", DB, 0x11 + fixup_size[i] & 0xFF);
+            fprintf(outputfile, "\t%s\t$%02X\t\t\t; EXTERNAL FIXUP\n", DB, 0x11 + fixup_size[i] & 0xFF);
-            printf("\t%s\t_F%03d-_SEGBEGIN\t\t\n", DW, i);
+            fprintf(outputfile, "\t%s\t_F%03d-_SEGBEGIN\t\t\n", DW, i);
-            printf("\t%s\t%d\t\t\t; ESD INDEX\n", DB, fixup_tag[i]);
+            fprintf(outputfile, "\t%s\t%d\t\t\t; ESD INDEX\n", DB, fixup_tag[i]);
         }
         else
         {
-            printf("\t%s\t$%02X\t\t\t; INTERNAL FIXUP\n", DB, 0x01 + fixup_size[i] & 0xFF);
+            fprintf(outputfile, "\t%s\t$%02X\t\t\t; INTERNAL FIXUP\n", DB, 0x01 + fixup_size[i] & 0xFF);
-            printf("\t%s\t_F%03d-_SEGBEGIN\t\t\n", DW, i);
+            fprintf(outputfile, "\t%s\t_F%03d-_SEGBEGIN\t\t\n", DW, i);
-            printf("\t%s\t$00\n", DB);
+            fprintf(outputfile, "\t%s\t$00\n", DB);
         }
     }
-    printf("\t%s\t$00\t\t\t; END OF RLD\n", DB);
+    fprintf(outputfile, "\t%s\t$00\t\t\t; END OF RLD\n", DB);
 }
 void emit_esd(void)
 {
     int i;
 
-    printf(";\n; EXTERNAL/ENTRY SYMBOL DICTIONARY\n;\n");
+    fprintf(outputfile, ";\n; EXTERNAL/ENTRY SYMBOL DICTIONARY\n;\n");
     for (i = 0; i < globals; i++)
     {
         if (idglobal_type[i] & ACCESSED_TYPE) // Only refer to accessed externals
         {
             emit_dci(&idglobal_name[i][1], idglobal_name[i][0]);
-            printf("\t%s\t$10\t\t\t; EXTERNAL SYMBOL FLAG\n", DB);
+            fprintf(outputfile, "\t%s\t$10\t\t\t; EXTERNAL SYMBOL FLAG\n", DB);
-            printf("\t%s\t%d\t\t\t; ESD INDEX\n", DW, idglobal_tag[i]);
+            fprintf(outputfile, "\t%s\t%d\t\t\t; ESD INDEX\n", DW, idglobal_tag[i]);
         }
         else if (idglobal_type[i] & EXPORT_TYPE)
         {
             emit_dci(&idglobal_name[i][1], idglobal_name[i][0]);
-            printf("\t%s\t$08\t\t\t; ENTRY SYMBOL FLAG\n", DB);
+            fprintf(outputfile, "\t%s\t$08\t\t\t; ENTRY SYMBOL FLAG\n", DB);
-            printf("\t%s\t%s\t\t\n", DW, tag_string(idglobal_tag[i], idglobal_type[i]));
+            fprintf(outputfile, "\t%s\t%s\t\t\n", DW, tag_string(idglobal_tag[i], idglobal_type[i]));
         }
     }
-    printf("\t%s\t$00\t\t\t; END OF ESD\n", DB);
+    fprintf(outputfile, "\t%s\t$00\t\t\t; END OF ESD\n", DB);
 }
 void emit_trailer(void)
 {
     if (!(outflags & BYTECODE_SEG))
         emit_bytecode_seg();
     if (!(outflags & INIT))
-        printf("_INIT\t=\t0\n");
+        fprintf(outputfile, "_INIT\t=\t0\n");
     if (!(outflags & SYSFLAGS))
-        printf("_SYSFLAGS\t=\t0\n");
+        fprintf(outputfile, "_SYSFLAGS\t=\t0\n");
     if (outflags & MODULE)
     {
-        printf("_DEFCNT\t=\t%d\n", defs);
+        fprintf(outputfile, "_DEFCNT\t=\t%d\n", defs);
-        printf("_SEGEND%c\n", LBL);
+        fprintf(outputfile, "_SEGEND%c\n", LBL);
         emit_rld();
         emit_esd();
     }
@@ -481,12 +481,12 @@ void emit_moddep(char *name, int len)
             idglobal_add(name, len, EXTERN_TYPE | WORD_TYPE, 2); // Add to symbol table
         }
         else
-            printf("\t%s\t$00\t\t\t; END OF MODULE DEPENDENCIES\n", DB);
+            fprintf(outputfile, "\t%s\t$00\t\t\t; END OF MODULE DEPENDENCIES\n", DB);
     }
 }
 void emit_sysflags(int val)
 {
-    printf("_SYSFLAGS\t=\t$%04X\t\t; SYSTEM FLAGS\n", val);
+    fprintf(outputfile, "_SYSFLAGS\t=\t$%04X\t\t; SYSTEM FLAGS\n", val);
     outflags |= SYSFLAGS;
 }
 void emit_bytecode_seg(void)
@@ -494,57 +494,57 @@ void emit_bytecode_seg(void)
     if ((outflags & MODULE) && !(outflags & BYTECODE_SEG))
     {
         if (lastglobalsize == 0) // Pad a byte if last label is at end of data segment
-            printf("\t%s\t$00\t\t\t; PAD BYTE\n", DB);
+            fprintf(outputfile, "\t%s\t$00\t\t\t; PAD BYTE\n", DB);
-        printf("_SUBSEG%c\t\t\t\t; BYTECODE STARTS\n", LBL);
+        fprintf(outputfile, "_SUBSEG%c\t\t\t\t; BYTECODE STARTS\n", LBL);
     }
     outflags |= BYTECODE_SEG;
 }
 void emit_comment(char *s)
 {
-    printf("\t\t\t\t\t; %s\n", s);
+    fprintf(outputfile, "\t\t\t\t\t; %s\n", s);
 }
 void emit_asm(char *s)
 {
-    printf("%s\n", s);
+    fprintf(outputfile, "%s\n", s);
 }
 void emit_idlocal(char *name, int value)
 {
-    printf("\t\t\t\t\t; %s -> [%d]\n", name, value);
+    fprintf(outputfile, "\t\t\t\t\t; %s -> [%d]\n", name, value);
 }
 void emit_idglobal(int tag, int size, char *name)
 {
     lastglobalsize = size;
     if (size == 0)
-        printf("_D%03d%c\t\t\t\t\t; %s\n", tag, LBL, name);
+        fprintf(outputfile, "_D%03d%c\t\t\t\t\t; %s\n", tag, LBL, name);
     else
-        printf("_D%03d%c\t%s\t%d\t\t\t; %s\n", tag, LBL, DS, size, name);
+        fprintf(outputfile, "_D%03d%c\t%s\t%d\t\t\t; %s\n", tag, LBL, DS, size, name);
 }
 void emit_idfunc(int tag, int type, char *name, int is_bytecode)
 {
     if (name)
-        printf("%s%c\t\t\t\t\t; %s()\n", tag_string(tag, type), LBL, name);
+        fprintf(outputfile, "%s%c\t\t\t\t\t; %s()\n", tag_string(tag, type), LBL, name);
     if (!(outflags & MODULE))
     {
-        //printf("%s%c\n", name, LBL);
+        //fprintf(outputfile, "%s%c\n", name, LBL);
         if (is_bytecode)
-            printf("\tJSR\tINTERP\n");
+            fprintf(outputfile, "\tJSR\tINTERP\n");
     }
 }
 void emit_lambdafunc(int tag, char *name, int cparams, t_opseq *lambda_seq)
 {
     emit_idfunc(tag, DEF_TYPE, name, 1);
     if (cparams)
-        printf("\t%s\t$58,$%02X,$%02X\t\t; ENTER\t%d,%d\n", DB, cparams*2, cparams, cparams*2, cparams);
+        fprintf(outputfile, "\t%s\t$58,$%02X,$%02X\t\t; ENTER\t%d,%d\n", DB, cparams*2, cparams, cparams*2, cparams);
     emit_seq(lambda_seq);
     emit_pending_seq();
     if (cparams)
-        printf("\t%s\t$5A,$%02X\t\t\t; LEAVE\t%d\n", DB, cparams*2, cparams*2);
+        fprintf(outputfile, "\t%s\t$5A,$%02X\t\t\t; LEAVE\t%d\n", DB, cparams*2, cparams*2);
     else
-        printf("\t%s\t$5C\t\t\t; RET\n", DB);
+        fprintf(outputfile, "\t%s\t$5C\t\t\t; RET\n", DB);
 }
 void emit_idconst(char *name, int value)
 {
-    printf("\t\t\t\t\t; %s = %d\n", name, value);
+    fprintf(outputfile, "\t\t\t\t\t; %s = %d\n", name, value);
 }
 int emit_data(int vartype, int consttype, long constval, int constsize)
 {
@@ -553,25 +553,25 @@ int emit_data(int vartype, int consttype, long constval, int constsize)
     if (consttype == 0)
     {
         datasize = constsize;
-        printf("\t%s\t$%02X\n", DS, constsize);
+        fprintf(outputfile, "\t%s\t$%02X\n", DS, constsize);
     }
     else if (consttype & STRING_TYPE)
     {
         str = (unsigned char *)constval;
         constsize = *str++;
         datasize = constsize + 1;
-        printf("\t%s\t$%02X\n", DB, constsize);
+        fprintf(outputfile, "\t%s\t$%02X\n", DB, constsize);
         while (constsize-- > 0)
         {
-            printf("\t%s\t$%02X", DB, *str++);
+            fprintf(outputfile, "\t%s\t$%02X", DB, *str++);
             for (i = 0; i < 7; i++)
             {
                 if (constsize-- > 0)
-                    printf(",$%02X", *str++);
+                    fprintf(outputfile, ",$%02X", *str++);
                 else
                     break;
             }
-            printf("\n");
+            fprintf(outputfile, "\n");
         }
     }
     else if (consttype & ADDR_TYPE)
@@ -581,18 +581,18 @@ int emit_data(int vartype, int consttype, long constval, int constsize)
             int fixup = fixup_new(constval, consttype, FIXUP_WORD);
             datasize = 2;
             if (consttype & EXTERN_TYPE)
-                printf("_F%03d%c\t%s\t0\t\t\t; %s\n", fixup, LBL, DW, tag_string(constval, consttype));
+                fprintf(outputfile, "_F%03d%c\t%s\t0\t\t\t; %s\n", fixup, LBL, DW, tag_string(constval, consttype));
             else
-                printf("_F%03d%c\t%s\t%s\n", fixup, LBL, DW, tag_string(constval, consttype));
+                fprintf(outputfile, "_F%03d%c\t%s\t%s\n", fixup, LBL, DW, tag_string(constval, consttype));
         }
         else
         {
             int fixup = fixup_new(constval, consttype, FIXUP_BYTE);
             datasize = 1;
             if (consttype & EXTERN_TYPE)
-                printf("_F%03d%c\t%s\t0\t\t\t; %s\n", fixup, LBL, DB, tag_string(constval, consttype));
+                fprintf(outputfile, "_F%03d%c\t%s\t0\t\t\t; %s\n", fixup, LBL, DB, tag_string(constval, consttype));
             else
-                printf("_F%03d%c\t%s\t%s\n", fixup, LBL, DB, tag_string(constval, consttype));
+                fprintf(outputfile, "_F%03d%c\t%s\t%s\n", fixup, LBL, DB, tag_string(constval, consttype));
         }
     }
     else
@@ -600,12 +600,12 @@ int emit_data(int vartype, int consttype, long constval, int constsize)
         if (vartype & WORD_TYPE)
         {
             datasize = 2;
-            printf("\t%s\t$%04lX\n", DW, constval & 0xFFFF);
+            fprintf(outputfile, "\t%s\t$%04lX\n", DW, constval & 0xFFFF);
         }
         else
         {
             datasize = 1;
-            printf("\t%s\t$%02lX\n", DB, constval & 0xFF);
+            fprintf(outputfile, "\t%s\t$%02lX\n", DB, constval & 0xFF);
         }
     }
     return (datasize);
@@ -613,78 +613,78 @@ int emit_data(int vartype, int consttype, long constval, int constsize)
 void emit_codetag(int tag)
 {
     emit_pending_seq();
-    printf("_B%03d%c\n", tag, LBL);
+    fprintf(outputfile, "_B%03d%c\n", tag, LBL);
 }
 void emit_const(int cval)
 {
     emit_pending_seq();
     if ((cval & 0xFFFF) == 0xFFFF)
-        printf("\t%s\t$20\t\t\t; MINUS ONE\n", DB);
+        fprintf(outputfile, "\t%s\t$20\t\t\t; MINUS ONE\n", DB);
     else if ((cval & 0xFFF0) == 0x0000)
-        printf("\t%s\t$%02X\t\t\t; CN\t%d\n", DB, cval*2, cval);
+        fprintf(outputfile, "\t%s\t$%02X\t\t\t; CN\t%d\n", DB, cval*2, cval);
     else if ((cval & 0xFF00) == 0x0000)
-        printf("\t%s\t$2A,$%02X\t\t\t; CB\t%d\n", DB, cval, cval);
+        fprintf(outputfile, "\t%s\t$2A,$%02X\t\t\t; CB\t%d\n", DB, cval, cval);
     else if ((cval & 0xFF00) == 0xFF00)
-        printf("\t%s\t$5E,$%02X\t\t\t; CFFB\t%d\n", DB, cval&0xFF, cval);
+        fprintf(outputfile, "\t%s\t$5E,$%02X\t\t\t; CFFB\t%d\n", DB, cval&0xFF, cval);
     else
-        printf("\t%s\t$2C,$%02X,$%02X\t\t; CW\t%d\n", DB, cval&0xFF,(cval>>8)&0xFF, cval);
+        fprintf(outputfile, "\t%s\t$2C,$%02X,$%02X\t\t; CW\t%d\n", DB, cval&0xFF,(cval>>8)&0xFF, cval);
 }
 void emit_conststr(long conststr)
 {
-    printf("\t%s\t$2E\t\t\t; CS\n", DB);
+    fprintf(outputfile, "\t%s\t$2E\t\t\t; CS\n", DB);
     emit_data(0, STRING_TYPE, conststr, 0);
 }
 void emit_addi(int cval)
 {
     emit_pending_seq();
-    printf("\t%s\t$38,$%02X\t\t\t; ADDI\t%d\n", DB, cval, cval);
+    fprintf(outputfile, "\t%s\t$38,$%02X\t\t\t; ADDI\t%d\n", DB, cval, cval);
 }
 void emit_subi(int cval)
 {
     emit_pending_seq();
-    printf("\t%s\t$3A,$%02X\t\t\t; SUBI\t%d\n", DB, cval, cval);
+    fprintf(outputfile, "\t%s\t$3A,$%02X\t\t\t; SUBI\t%d\n", DB, cval, cval);
 }
 void emit_andi(int cval)
 {
     emit_pending_seq();
-    printf("\t%s\t$3C,$%02X\t\t\t; ANDI\t%d\n", DB, cval, cval);
+    fprintf(outputfile, "\t%s\t$3C,$%02X\t\t\t; ANDI\t%d\n", DB, cval, cval);
 }
 void emit_ori(int cval)
 {
     emit_pending_seq();
-    printf("\t%s\t$3E,$%02X\t\t\t; ORI\t%d\n", DB, cval, cval);
+    fprintf(outputfile, "\t%s\t$3E,$%02X\t\t\t; ORI\t%d\n", DB, cval, cval);
 }
 void emit_lb(void)
 {
-    printf("\t%s\t$60\t\t\t; LB\n", DB);
+    fprintf(outputfile, "\t%s\t$60\t\t\t; LB\n", DB);
 }
 void emit_lw(void)
 {
-    printf("\t%s\t$62\t\t\t; LW\n", DB);
+    fprintf(outputfile, "\t%s\t$62\t\t\t; LW\n", DB);
 }
 void emit_llb(int index)
 {
-    printf("\t%s\t$64,$%02X\t\t\t; LLB\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$64,$%02X\t\t\t; LLB\t[%d]\n", DB, index, index);
 }
 void emit_llw(int index)
 {
-    printf("\t%s\t$66,$%02X\t\t\t; LLW\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$66,$%02X\t\t\t; LLW\t[%d]\n", DB, index, index);
 }
 void emit_addlb(int index)
 {
-    printf("\t%s\t$B0,$%02X\t\t\t; ADDLB\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$B0,$%02X\t\t\t; ADDLB\t[%d]\n", DB, index, index);
 }
 void emit_addlw(int index)
 {
-    printf("\t%s\t$B2,$%02X\t\t\t; ADDLW\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$B2,$%02X\t\t\t; ADDLW\t[%d]\n", DB, index, index);
 }
 void emit_idxlb(int index)
 {
-    printf("\t%s\t$B8,$%02X\t\t\t; IDXLB\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$B8,$%02X\t\t\t; IDXLB\t[%d]\n", DB, index, index);
 }
 void emit_idxlw(int index)
 {
-    printf("\t%s\t$BA,$%02X\t\t\t; IDXLW\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$BA,$%02X\t\t\t; IDXLW\t[%d]\n", DB, index, index);
 }
 void emit_lab(int tag, int offset, int type)
 {
@@ -692,12 +692,12 @@ void emit_lab(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$68\t\t\t; LAB\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$68\t\t\t; LAB\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$68,$%02X,$%02X\t\t; LAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$68,$%02X,$%02X\t\t; LAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_law(int tag, int offset, int type)
@@ -706,12 +706,12 @@ void emit_law(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$6A\t\t\t; LAW\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$6A\t\t\t; LAW\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$6A,$%02X,$%02X\t\t; LAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$6A,$%02X,$%02X\t\t; LAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_addab(int tag, int offset, int type)
@@ -720,12 +720,12 @@ void emit_addab(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$B4\t\t\t; ADDAB\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$B4\t\t\t; ADDAB\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$B4,$%02X,$%02X\t\t; ADDAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$B4,$%02X,$%02X\t\t; ADDAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_addaw(int tag, int offset, int type)
@@ -734,12 +734,12 @@ void emit_addaw(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$B6\t\t\t; ADDAW\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$B6\t\t\t; ADDAW\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$B6,$%02X,$%02X\t\t; ADDAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$B6,$%02X,$%02X\t\t; ADDAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_idxab(int tag, int offset, int type)
@@ -748,12 +748,12 @@ void emit_idxab(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$BC\t\t\t; IDXAB\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$BC\t\t\t; IDXAB\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$BC,$%02X,$%02X\t\t; IDXAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$BC,$%02X,$%02X\t\t; IDXAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_idxaw(int tag, int offset, int type)
@@ -762,37 +762,37 @@ void emit_idxaw(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$BE\t\t\t; IDXAW\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$BE\t\t\t; IDXAW\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$BE,$%02X,$%02X\t\t; IDXAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$BE,$%02X,$%02X\t\t; IDXAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_sb(void)
 {
-    printf("\t%s\t$70\t\t\t; SB\n", DB);
+    fprintf(outputfile, "\t%s\t$70\t\t\t; SB\n", DB);
 }
 void emit_sw(void)
 {
-    printf("\t%s\t$72\t\t\t; SW\n", DB);
+    fprintf(outputfile, "\t%s\t$72\t\t\t; SW\n", DB);
 }
 void emit_slb(int index)
 {
-    printf("\t%s\t$74,$%02X\t\t\t; SLB\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$74,$%02X\t\t\t; SLB\t[%d]\n", DB, index, index);
 }
 void emit_slw(int index)
 {
-    printf("\t%s\t$76,$%02X\t\t\t; SLW\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$76,$%02X\t\t\t; SLW\t[%d]\n", DB, index, index);
 }
 void emit_dlb(int index)
 {
-    printf("\t%s\t$6C,$%02X\t\t\t; DLB\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$6C,$%02X\t\t\t; DLB\t[%d]\n", DB, index, index);
 }
 void emit_dlw(int index)
 {
-    printf("\t%s\t$6E,$%02X\t\t\t; DLW\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$6E,$%02X\t\t\t; DLW\t[%d]\n", DB, index, index);
 }
 void emit_sab(int tag, int offset, int type)
 {
@@ -800,12 +800,12 @@ void emit_sab(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$78\t\t\t; SAB\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$78\t\t\t; SAB\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$78,$%02X,$%02X\t\t; SAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$78,$%02X,$%02X\t\t; SAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_saw(int tag, int offset, int type)
@@ -814,12 +814,12 @@ void emit_saw(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$7A\t\t\t; SAW\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$7A\t\t\t; SAW\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
     {
-        printf("\t%s\t$7A,$%02X,$%02X\t\t; SAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$7A,$%02X,$%02X\t\t; SAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
     }
 }
 void emit_dab(int tag, int offset, int type)
@@ -828,11 +828,11 @@ void emit_dab(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$7C\t\t\t; DAB\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$7C\t\t\t; DAB\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
-        printf("\t%s\t$7C,$%02X,$%02X\t\t; DAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$7C,$%02X,$%02X\t\t; DAB\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
 }
 void emit_daw(int tag, int offset, int type)
 {
@@ -840,36 +840,36 @@ void emit_daw(int tag, int offset, int type)
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$7E\t\t\t; DAW\t%s+%d\n", DB, taglbl, offset);
+        fprintf(outputfile, "\t%s\t$7E\t\t\t; DAW\t%s+%d\n", DB, taglbl, offset);
-        printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
     }
     else
-        printf("\t%s\t$7E,$%02X,$%02X\t\t; DAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
+        fprintf(outputfile, "\t%s\t$7E,$%02X,$%02X\t\t; DAW\t%d\n", DB, offset&0xFF,(offset>>8)&0xFF, offset);
 }
 void emit_localaddr(int index)
 {
-    printf("\t%s\t$28,$%02X\t\t\t; LLA\t[%d]\n", DB, index, index);
+    fprintf(outputfile, "\t%s\t$28,$%02X\t\t\t; LLA\t[%d]\n", DB, index, index);
 }
 void emit_globaladdr(int tag, int offset, int type)
 {
     int fixup = fixup_new(tag, type, FIXUP_WORD);
     char *taglbl = tag_string(tag, type);
-    printf("\t%s\t$26\t\t\t; LA\t%s+%d\n", DB, taglbl, offset);
+    fprintf(outputfile, "\t%s\t$26\t\t\t; LA\t%s+%d\n", DB, taglbl, offset);
-    printf("_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
+    fprintf(outputfile, "_F%03d%c\t%s\t%s+%d\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl, offset);
 }
 void emit_indexbyte(void)
 {
-    printf("\t%s\t$82\t\t\t; IDXB\n", DB);
+    fprintf(outputfile, "\t%s\t$82\t\t\t; IDXB\n", DB);
 }
 void emit_indexword(void)
 {
-    printf("\t%s\t$9E\t\t\t; IDXW\n", DB);
+    fprintf(outputfile, "\t%s\t$9E\t\t\t; IDXW\n", DB);
 }
 void emit_select(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$52\t\t\t; SEL\n", DB);
+    fprintf(outputfile, "\t%s\t$52\t\t\t; SEL\n", DB);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_caseblock(int casecnt, int *caseof, int *casetag)
 {
@@ -878,144 +878,144 @@ void emit_caseblock(int casecnt, int *caseof, int *casetag)
     if (casecnt < 1 || casecnt > 256)
         parse_error("Switch count under/overflow\n");
     emit_pending_seq();
-    printf("\t%s\t$%02X\t\t\t; CASEBLOCK\n", DB, casecnt & 0xFF);
+    fprintf(outputfile, "\t%s\t$%02X\t\t\t; CASEBLOCK\n", DB, casecnt & 0xFF);
     for (i = 0; i < casecnt; i++)
     {
-        printf("\t%s\t$%04X\n", DW, caseof[i] & 0xFFFF);
+        fprintf(outputfile, "\t%s\t$%04X\n", DW, caseof[i] & 0xFFFF);
-        printf("\t%s\t_B%03d-*\n", DW, casetag[i]);
+        fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, casetag[i]);
     }
 }
 void emit_breq(int tag)
 {
-    printf("\t%s\t$22\t\t\t; BREQ\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$22\t\t\t; BREQ\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brne(int tag)
 {
-    printf("\t%s\t$24\t\t\t; BRNE\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$24\t\t\t; BRNE\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brfls(int tag)
 {
-    printf("\t%s\t$4C\t\t\t; BRFLS\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$4C\t\t\t; BRFLS\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brtru(int tag)
 {
-    printf("\t%s\t$4E\t\t\t; BRTRU\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$4E\t\t\t; BRTRU\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brnch(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$50\t\t\t; BRNCH\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$50\t\t\t; BRNCH\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brand(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$AC\t\t\t; BRAND\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$AC\t\t\t; BRAND\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_bror(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$AE\t\t\t; BROR\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$AE\t\t\t; BROR\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brgt(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$A0\t\t\t; BRGT\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$A0\t\t\t; BRGT\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_brlt(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$A2\t\t\t; BRLT\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$A2\t\t\t; BRLT\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_incbrle(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$A4\t\t\t; INCBRLE\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$A4\t\t\t; INCBRLE\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_addbrle(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$A6\t\t\t; ADDBRLE\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$A6\t\t\t; ADDBRLE\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_decbrge(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$A8\t\t\t; DECBRGE\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$A8\t\t\t; DECBRGE\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_subbrge(int tag)
 {
     emit_pending_seq();
-    printf("\t%s\t$AA\t\t\t; SUBBRGE\t_B%03d\n", DB, tag);
+    fprintf(outputfile, "\t%s\t$AA\t\t\t; SUBBRGE\t_B%03d\n", DB, tag);
-    printf("\t%s\t_B%03d-*\n", DW, tag);
+    fprintf(outputfile, "\t%s\t_B%03d-*\n", DW, tag);
 }
 void emit_call(int tag, int type)
 {
     if (type == CONST_TYPE)
     {
-        printf("\t%s\t$54\t\t\t; CALL\t%i\n", DB, tag);
+        fprintf(outputfile, "\t%s\t$54\t\t\t; CALL\t%i\n", DB, tag);
-        printf("\t%s\t%i\t\t\n", DW, tag);
+        fprintf(outputfile, "\t%s\t%i\t\t\n", DW, tag);
     }
     else
     {
         int fixup = fixup_new(tag, type, FIXUP_WORD);
         char *taglbl = tag_string(tag, type);
-        printf("\t%s\t$54\t\t\t; CALL\t%s\n", DB, taglbl);
+        fprintf(outputfile, "\t%s\t$54\t\t\t; CALL\t%s\n", DB, taglbl);
-        printf("_F%03d%c\t%s\t%s\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl);
+        fprintf(outputfile, "_F%03d%c\t%s\t%s\t\t\n", fixup, LBL, DW, type & EXTERN_TYPE ? "0" : taglbl);
     }
 }
 void emit_ical(void)
 {
-    printf("\t%s\t$56\t\t\t; ICAL\n", DB);
+    fprintf(outputfile, "\t%s\t$56\t\t\t; ICAL\n", DB);
 }
 void emit_leave(void)
 {
     emit_pending_seq();
     if (localsize)
-        printf("\t%s\t$5A,$%02X\t\t\t; LEAVE\t%d\n", DB, localsize, localsize);
+        fprintf(outputfile, "\t%s\t$5A,$%02X\t\t\t; LEAVE\t%d\n", DB, localsize, localsize);
     else
-        printf("\t%s\t$5C\t\t\t; RET\n", DB);
+        fprintf(outputfile, "\t%s\t$5C\t\t\t; RET\n", DB);
 }
 void emit_ret(void)
 {
     emit_pending_seq();
-    printf("\t%s\t$5C\t\t\t; RET\n", DB);
+    fprintf(outputfile, "\t%s\t$5C\t\t\t; RET\n", DB);
 }
 void emit_enter(int cparams)
 {
     if (localsize)
-        printf("\t%s\t$58,$%02X,$%02X\t\t; ENTER\t%d,%d\n", DB, localsize, cparams, localsize, cparams);
+        fprintf(outputfile, "\t%s\t$58,$%02X,$%02X\t\t; ENTER\t%d,%d\n", DB, localsize, cparams, localsize, cparams);
 }
 void emit_start(void)
 {
-    printf("_INIT%c\n", LBL);
+    fprintf(outputfile, "_INIT%c\n", LBL);
     outflags |= INIT;
     defs++;
 }
 void emit_drop(void)
 {
     emit_pending_seq();
-    printf("\t%s\t$30\t\t\t; DROP \n", DB);
+    fprintf(outputfile, "\t%s\t$30\t\t\t; DROP \n", DB);
 }
 void emit_drop2(void)
 {
     emit_pending_seq();
-    printf("\t%s\t$32\t\t\t; DROP2\n", DB);
+    fprintf(outputfile, "\t%s\t$32\t\t\t; DROP2\n", DB);
 }
 void emit_dup(void)
 {
     emit_pending_seq();
-    printf("\t%s\t$34\t\t\t; DUP\n", DB);
+    fprintf(outputfile, "\t%s\t$34\t\t\t; DUP\n", DB);
 }
 int emit_unaryop(t_token op)
 {
@@ -1023,19 +1023,19 @@ int emit_unaryop(t_token op)
     switch (op)
     {
         case NEG_TOKEN:
-            printf("\t%s\t$90\t\t\t; NEG\n", DB);
+            fprintf(outputfile, "\t%s\t$90\t\t\t; NEG\n", DB);
             break;
         case COMP_TOKEN:
-            printf("\t%s\t$92\t\t\t; COMP\n", DB);
+            fprintf(outputfile, "\t%s\t$92\t\t\t; COMP\n", DB);
             break;
         case LOGIC_NOT_TOKEN:
-            printf("\t%s\t$80\t\t\t; NOT\n", DB);
+            fprintf(outputfile, "\t%s\t$80\t\t\t; NOT\n", DB);
             break;
         case INC_TOKEN:
-            printf("\t%s\t$8C\t\t\t; INCR\n", DB);
+            fprintf(outputfile, "\t%s\t$8C\t\t\t; INCR\n", DB);
             break;
         case DEC_TOKEN:
-            printf("\t%s\t$8E\t\t\t; DECR\n", DB);
+            fprintf(outputfile, "\t%s\t$8E\t\t\t; DECR\n", DB);
             break;
         case BPTR_TOKEN:
             emit_lb();
@@ -1055,52 +1055,52 @@ int emit_op(t_token op)
     switch (op)
     {
         case MUL_TOKEN:
-            printf("\t%s\t$86\t\t\t; MUL\n", DB);
+            fprintf(outputfile, "\t%s\t$86\t\t\t; MUL\n", DB);
             break;
         case DIV_TOKEN:
-            printf("\t%s\t$88\t\t\t; DIV\n", DB);
+            fprintf(outputfile, "\t%s\t$88\t\t\t; DIV\n", DB);
             break;
         case MOD_TOKEN:
-            printf("\t%s\t$8A\t\t\t; MOD\n", DB);
+            fprintf(outputfile, "\t%s\t$8A\t\t\t; MOD\n", DB);
             break;
         case ADD_TOKEN:
-            printf("\t%s\t$82\t\t\t; ADD \n", DB);
+            fprintf(outputfile, "\t%s\t$82\t\t\t; ADD \n", DB);
             break;
         case SUB_TOKEN:
-            printf("\t%s\t$84\t\t\t; SUB \n", DB);
+            fprintf(outputfile, "\t%s\t$84\t\t\t; SUB \n", DB);
             break;
         case SHL_TOKEN:
-            printf("\t%s\t$9A\t\t\t; SHL\n", DB);
+            fprintf(outputfile, "\t%s\t$9A\t\t\t; SHL\n", DB);
             break;
         case SHR_TOKEN:
-            printf("\t%s\t$9C\t\t\t; SHR\n", DB);
+            fprintf(outputfile, "\t%s\t$9C\t\t\t; SHR\n", DB);
             break;
         case AND_TOKEN:
-            printf("\t%s\t$94\t\t\t; AND \n", DB);
+            fprintf(outputfile, "\t%s\t$94\t\t\t; AND \n", DB);
             break;
         case OR_TOKEN:
-            printf("\t%s\t$96\t\t\t; OR \n", DB);
+            fprintf(outputfile, "\t%s\t$96\t\t\t; OR \n", DB);
             break;
         case EOR_TOKEN:
-            printf("\t%s\t$98\t\t\t; XOR\n", DB);
+            fprintf(outputfile, "\t%s\t$98\t\t\t; XOR\n", DB);
             break;
         case EQ_TOKEN:
-            printf("\t%s\t$40\t\t\t; ISEQ\n", DB);
+            fprintf(outputfile, "\t%s\t$40\t\t\t; ISEQ\n", DB);
             break;
         case NE_TOKEN:
-            printf("\t%s\t$42\t\t\t; ISNE\n", DB);
+            fprintf(outputfile, "\t%s\t$42\t\t\t; ISNE\n", DB);
             break;
         case GE_TOKEN:
-            printf("\t%s\t$48\t\t\t; ISGE\n", DB);
+            fprintf(outputfile, "\t%s\t$48\t\t\t; ISGE\n", DB);
             break;
         case LT_TOKEN:
-            printf("\t%s\t$46\t\t\t; ISLT\n", DB);
+            fprintf(outputfile, "\t%s\t$46\t\t\t; ISLT\n", DB);
             break;
         case GT_TOKEN:
-            printf("\t%s\t$44\t\t\t; ISGT\n", DB);
+            fprintf(outputfile, "\t%s\t$44\t\t\t; ISGT\n", DB);
             break;
         case LE_TOKEN:
-            printf("\t%s\t$4A\t\t\t; ISLE\n", DB);
+            fprintf(outputfile, "\t%s\t$4A\t\t\t; ISLE\n", DB);
             break;
         case COMMA_TOKEN:
             break;
@@ -2040,7 +2040,7 @@ int emit_pending_seq()
                 emit_brlt(op->tag);
                 break;
             case CODETAG_CODE:
-                printf("_B%03d%c\n", op->tag, LBL);
+                fprintf(outputfile, "_B%03d%c\n", op->tag, LBL);
                 break;
             case NOP_CODE:
                 break;

src/toolsrc/ed.pla

@@ -993,11 +993,27 @@ def keyin3
     return key | $80
 end
 def keyin2e
-    byte key
+    byte key, vbl
+    ^$C079 = 0 // IOU enable and clear VBL int on //c
+    ^$C05B = 0 // Enable VBL Ints on //c
+    vbl    = ^$C019
     repeat
-        cursflash
+        if flags & showcurs
+            if flash == 0
+                ^cursptr = curschr
+            elsif flash == 128
+                ^cursptr = underchr
+            fin
+            if vbl ^ ^$C019
+                flash = flash + 8
+                vbl = ^$C019
+                ^$C079 = 0 // Clear VBL int on //c
+            fin
+        fin
         key = ^keyboard
     until key >= 128
+    ^$C05A = 0 // Disable VBL Ints on //c
+    ^$C078 = 0 // IOU disable on //c
     ^keystrobe
     if ^pushbttn2 & 128 // Closed Apple pressed
         when key
@@ -1615,7 +1631,7 @@ def cmdmode#0
     word cmdptr, line
 
     clrscrn
-    puts("PLASMA Editor, Version 2.0 ALPHA2\n")
+    puts("PLASMA Editor, Version 2.0\n")
     while not exit
         puts(@filename)
         cmdptr = gets($BA)

src/toolsrc/lex.c

@@ -9,8 +9,6 @@ char *statement, *tokenstr, *scanpos = "", *strpos = "";
 t_token scantoken = EOL_TOKEN, prevtoken;
 int tokenlen;
 long constval;
-FILE* inputfile;
-char *filename;
 int lineno = 0;
 FILE* outer_inputfile = NULL;
 char* outer_filename;
@@ -448,14 +446,6 @@ int next_line(void)
     t_token token;
     char* new_filename;
     strpos = conststr;
-    if (inputfile == NULL)
-    {
-        /*
-         * First-time init
-         */
-        inputfile = stdin;
-        filename = "<stdin>";
-    }
     if (*scanpos == ';')
     {
         statement = ++scanpos;
@@ -500,7 +490,7 @@ int next_line(void)
             inputline[len-1] = '\0';
         lineno++;
         scantoken = EOL_TOKEN;
-        printf("; %s: %04d: %s\n", filename, lineno, inputline);
+        fprintf(outputfile, "; %s: %04d: %s\n", filename, lineno, inputline);
     }
     token = scan();
     /*

src/toolsrc/parse.c

@@ -1,11 +1,13 @@
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#include <ctype.h>
 #include "plasm.h"
 #define LVALUE      0
 #define RVALUE      1
 #define MAX_LAMBDA  64
 
+int id_match(char *name, int len, char *id);
 int parse_mods(void);
 
 int infunc = 0, break_tag = 0, cont_tag = 0, stack_loop = 0;
@@ -802,7 +804,8 @@ t_opseq *parse_expr(t_opseq *codeseq, int *stackdepth)
         codeseq = gen_codetag(codeseq, tag_endtri);
     }
     return (codeseq);
-}t_opseq *parse_set(t_opseq *codeseq)
+}
+t_opseq *parse_set(t_opseq *codeseq)
 {
     char *setptr = tokenstr;
     int lparms = 0, rparms = 0;
@@ -1221,7 +1224,7 @@ int parse_stmnt(void)
     }
     return (scan() == EOL_TOKEN);
 }
-int parse_var(int type, long basesize)
+int parse_var(int type, long basesize, int ignore_var)
 {
     char *idstr;
     long constval;
@@ -1267,7 +1270,7 @@ int parse_var(int type, long basesize)
         else
             parse_error("Bad variable initializer");
     }
-    else
+    else if (!ignore_var)
     {
         if (idlen)
             id_add(idstr, idlen, type, size);
@@ -1341,7 +1344,7 @@ int parse_struc(void)
     scan();
     return (1);
 }
-int parse_vars(int type)
+int parse_vars(int type, int ignore_vars)
 {
     long value;
     int idlen, size, cfnparms, emit = 0;
@@ -1358,6 +1361,8 @@ int parse_vars(int type)
             emit_sysflags(value);
             break;
         case CONST_TOKEN:
+            if (type & LOCAL_TYPE)
+                parse_error("Cannot define local constant");
             if (scan() != ID_TOKEN)
                 parse_error("Missing variable");
             idstr = tokenstr;
@@ -1406,7 +1411,7 @@ int parse_vars(int type)
                 scan_rewind(tokenstr);
             if (type & WORD_TYPE)
                 cfnvals *= 2;
-            do parse_var(type, cfnvals); while (scantoken == COMMA_TOKEN);
+            do parse_var(type, cfnvals, ignore_vars); while (scantoken == COMMA_TOKEN);
             emit = type == GLOBAL_TYPE;
             break;
         case PREDEF_TOKEN:
@@ -1463,13 +1468,18 @@ int parse_vars(int type)
 }
 int parse_mods(void)
 {
+    int i, ignore_emit;
+
     if (scantoken == IMPORT_TOKEN)
     {
         if (scan() != ID_TOKEN)
             parse_error("Bad import definition");
-        emit_moddep(tokenstr, tokenlen);
+        for (i = 0; i < tokenlen; i++)
+            tokenstr[i] = toupper(tokenstr[i]);
+        if (!(ignore_emit = id_match(tokenstr, tokenlen, modfile)))
+            emit_moddep(tokenstr, tokenlen);
         scan();
-        while (parse_vars(EXTERN_TYPE)) next_line();
+        while (parse_vars(EXTERN_TYPE, ignore_emit)) next_line();
         if (scantoken != END_TOKEN)
             parse_error("Missing END");
         scan();
@@ -1549,7 +1559,7 @@ int parse_defs(void)
     {
         case CONST_TOKEN:
         case STRUC_TOKEN:
-            return parse_vars(GLOBAL_TYPE);
+            return parse_vars(GLOBAL_TYPE, FALSE);
         case EXPORT_TOKEN:
             if (scan() != DEF_TOKEN && scantoken != ASM_TOKEN)
                 parse_error("Bad export definition");
@@ -1617,7 +1627,7 @@ int parse_defs(void)
         /*
          * Parse local vars
          */
-        while (parse_vars(LOCAL_TYPE)) next_line();
+        while (parse_vars(LOCAL_TYPE, FALSE)) next_line();
         emit_enter(cfnparms);
         prevstmnt = 0;
         while (parse_stmnt()) next_line();
@@ -1714,7 +1724,7 @@ int parse_module(void)
     if (next_line())
     {
         while (parse_mods())            next_line();
-        while (parse_vars(GLOBAL_TYPE)) next_line();
+        while (parse_vars(GLOBAL_TYPE, FALSE)) next_line();
         while (parse_defs())            next_line();
         emit_bytecode_seg();
         emit_start();

src/toolsrc/parse.h

@@ -1 +1,2 @@
+int id_match(char *name, int len, char *id);
 int parse_module(void);

src/toolsrc/parse.pla

@@ -967,7 +967,7 @@ def parse_stmnt
     wend
     return scan == EOL_TKN
 end
-def parse_var(type, basesize)#0
+def parse_var(type, basesize, ignore_var)#0
     byte consttype, constsize, idlen
     word idptr, constval, arraysize, size
 
@@ -995,7 +995,7 @@ def parse_var(type, basesize)#0
             arraysize = arraysize + emit_data(type, consttype, constval, constsize)
         loop
         size_iddata(PTR_TYPE, size, arraysize)
-    else
+    elsif not ignore_var
         if idlen
             if infunc
                 new_idlocal(idptr, idlen, type, size)
@@ -1066,7 +1066,7 @@ def parse_struc#0
     if token <> END_TKN; exit_err(ERR_MISS|ERR_CLOSE|ERR_STATE); fin
     scan
 end
-def parse_vars(type)
+def parse_vars(type, ignore_vars)
     byte idlen, cfnparms, cfnvals
     word size, value, idptr
 
@@ -1076,6 +1076,7 @@ def parse_vars(type)
             modsysflags, drop, drop = parse_constexpr
             break
         is CONST_TKN
+            if type & LOCAL_TYPE; exit_err(ERR_INVAL|ERR_GLOBAL|ERR_INIT); fin
             if scan <> ID_TKN; exit_err(ERR_INVAL|ERR_CONST); fin
             idptr = tknptr
             idlen = tknlen
@@ -1107,7 +1108,7 @@ def parse_vars(type)
                 rewind(tknptr)
             fin
             if type & WORD_TYPE; size = size * 2; fin
-            repeat; parse_var(type, size); until token <> COMMA_TKN
+            repeat; parse_var(type, size, ignore_vars); until token <> COMMA_TKN
             break
         is PREDEF_TKN
             repeat
@@ -1149,11 +1150,23 @@ def parse_vars(type)
     return TRUE
 end
 def parse_mods
+    byte i, ignore_emit
+
     if token == IMPORT_TKN
         if scan <> ID_TKN; exit_err(ERR_MISS|ERR_ID); fin
-        new_moddep(tknptr, tknlen)
+        if tknlen == modfile
+            ignore_emit = TRUE
+            for i = 1 to tknlen
+                if toupper(tknptr->[i - 1]) <> modfile[i]; ignore_emit = FALSE; break; fin
+            next
+        else
+            ignore_emit = FALSE
+        fin
+        if not ignore_emit
+            new_moddep(tknptr, tknlen)
+        fin
         scan
-        while parse_vars(EXTERN_TYPE); nextln; loop
+        while parse_vars(EXTERN_TYPE, ignore_emit); nextln; loop
         if token <> END_TKN; exit_err(ERR_MISS|ERR_CLOSE|ERR_STATE); fin
         scan
     fin
@@ -1228,7 +1241,7 @@ def parse_defs
     when token
         is CONST_TKN
         is STRUC_TKN
-            return parse_vars(GLOBAL_TYPE)
+            return parse_vars(GLOBAL_TYPE, FALSE)
         is EXPORT_TKN
             if scan <> DEF_TKN; exit_err(ERR_INVAL|ERR_STATE); fin
             type = type | EXPORT_TYPE
@@ -1273,7 +1286,7 @@ def parse_defs
             defcodeptr = codeptr
             emit_tag(func_tag)
             new_dfd(func_tag)
-            while parse_vars(LOCAL_TYPE); nextln; loop
+            while parse_vars(LOCAL_TYPE, FALSE); nextln; loop
             emit_enter(cfnparms)
             prevstmnt = 0
             while parse_stmnt; nextln; loop
@@ -1299,18 +1312,19 @@ end
 def parse_module#0
     init_idglobal
     init_idlocal
-    puts("Data+Code buffer size = "); puti(codebufsz); putln
+    puts("Data+Code buffer size = "); puti(codebufsz); putln; putln
+    puts(@modfile); putln
     if nextln
         //
         // Compile module
         //
-        puts("\nDATA:");
+        puts("DATA:");
         while parse_mods;              nextln; loop
-        while parse_vars(GLOBAL_TYPE); nextln; loop
+        while parse_vars(GLOBAL_TYPE, FALSE); nextln; loop
         emit_codeseg
         puti(codeptr - codebuff); puts(@bytesln)
         while parse_defs;              nextln; loop
-        puts("INIT:")
+        puts("INIT:");
         entrypoint = codeptr
         prevstmnt  = 0
         init_idlocal

src/toolsrc/plasm.c

@@ -1,11 +1,17 @@
 #include <stdio.h>
+#include <stdlib.h>
+#include <strings.h>
+#include <string.h>
+#include <ctype.h>
 #include "plasm.h"
 
 int outflags = 0;
+FILE *inputfile = NULL, *outputfile;
+char *filename, asmfile[128], modfile[17];
 
 int main(int argc, char **argv)
 {
-    int j, i, flags = 0;
+    int k, j, i, flags = 0;
     for (i = 1; i < argc; i++)
     {
         if (argv[i][0] == '-')
@@ -29,14 +35,72 @@ int main(int argc, char **argv)
                         break;
                     case 'W':
                         outflags |= WARNINGS;
+                        break;
+                    case 'S':
+                        outflags |= STREAM;
+                        break;
                 }
             }
         }
+        else
+        {
+            if (inputfile == NULL)
+            {
+                filename = argv[i];
+                inputfile = fopen(filename, "r");
+                if (!inputfile)
+                {
+                    printf("Error opening input file: %s\n", filename);
+                    exit(1);
+                }
+                strcpy(asmfile, filename);
+                j = strlen(asmfile);
+                while (j && asmfile[j] != '.')
+                {
+                    asmfile[j] = '\0';
+                    j--;
+                }
+                asmfile[j+1] = 'a';
+                while (j && asmfile[j-1] != '/')
+                    j--;
+                k = 1;
+                while (asmfile[j] != '.')
+                    modfile[k++] = toupper(asmfile[j++]);
+                modfile[k] = '\0';
+                modfile[0] = k - 1;
+                if (outflags & STREAM)
+                {
+                    strcpy(asmfile, "STDOUT");
+                    outputfile = stdout;
+                }
+                else
+                {
+                    outputfile = fopen(asmfile, "w");
+                    if (!outputfile)
+                    {
+                        printf("Error opening output file %s\n", asmfile);
+                        exit(1);
+                    }
+                }
+            }
+            else
+            {
+                printf("Too many input files\n");
+                exit(1);
+            }
+        }
+    }
+    if (inputfile == NULL)
+    {
+        printf("Usage: %s [-AMONWS] <inputfile>\n", argv[0]);
+        return (0);
     }
     emit_flags(outflags);
     if (parse_module())
     {
         fprintf(stderr, "Compilation complete.\n");
     }
+    fclose(inputfile);
+    fclose(outputfile);
     return (0);
 }

src/toolsrc/plasm.h

@@ -9,7 +9,12 @@
 #define SYSFLAGS        (1<<5)
 #define WARNINGS        (1<<6)
 #define NO_COMBINE      (1<<7)
+#define STREAM          (1<<8)
+#define FALSE           0
+#define TRUE            (!FALSE)
 extern int outflags;
+extern FILE *inputfile, *outputfile;
+extern char *filename, modfile[17];
 #include "tokens.h"
 #include "lex.h"
 #include "symbols.h"

src/toolsrc/plasm.pla

@@ -276,7 +276,7 @@ byte outflags
 // ProDOS/SOS file references
 //
 byte refnum, srcref, incref
-byte[32] srcfile, incfile, relfile
+byte[32] srcfile, incfile, relfile, modfile
 word parsefile            // Pointer to current file
 word srcline              // Saved source line number
 //
@@ -508,7 +508,7 @@ include "toolsrc/parse.pla"
 //
 // Look at command line arguments and compile module
 //
-puts("PLASMA Compiler, Version 2.0 ALPHA2\n")
+puts("PLASMA Compiler, Version 2.0\n")
 arg = argNext(argFirst)
 if ^arg and ^(arg + 1) == '-'
     opt = arg + 2
@@ -560,6 +560,15 @@ if ^arg
             //
             strcpy(@relfile, "A.OUT")
         fin
+        modfile = 0
+        for srcref = 1 to relfile
+            if relfile[srcref] == '/'
+                modfile = 0
+            else
+                modfile++
+                modfile[modfile] = toupper(relfile[srcref])
+            fin
+        next
     fin
 fin
 if srcfile and relfile

src/utilsrc/apple/copy.pla

@@ -217,6 +217,9 @@ if not except(exit)
                 pathcpy(@dstpath, arg)
                 arg = argNext(arg)
             loop
+            if dstpath[0] == 1 and dstpath[1] == '='
+                fileio:getpfx(@dstpath)
+            fin
             if not chkdstpath(@dstpath) and (srccnt > 1 or isWildName(srcfilelist))
                 puts("Destination must be a directory: "); puts(@dstpath); putln
                 return

src/utilsrc/tftpd.pla

@@ -5,6 +5,7 @@ include "inc/cmdsys.plh"
 include "inc/inet.plh"
 include "inc/fileio.plh"
 include "inc/conio.plh"
+sysflags nojitc // Keep JITC from compiling and pausing while transferring
 //
 // TFTP values
 //
@@ -369,7 +370,7 @@ def volumes#0
     next
 end
 
-puts("TFTP Server Version 2.0 ALPHA1\n")
+puts("TFTP Server, Version 2.0\n")
 if !iNet:initIP()
     return -1
 fin

src/vmsrc/apple/a1cmd.pla

@@ -52,7 +52,7 @@ byte perr, refauto
 // String pool.
 //
 byte autorun[]    = "AUTORUN"
-byte verstr[]     = "\nPLASMA ALPHA2"
+byte verstr[]     = "\nPLASMA BETA"
 byte freestr[]    = "MEM FREE:$"
 byte errorstr[]   = "ERR:$"
 byte prompt[]     = "PLASMA"

src/vmsrc/apple/cmd.pla

@@ -72,7 +72,6 @@ byte hpalignstr = "HEAPALLOCALIGN"
 byte hpallocstr = "HEAPALLOC"
 byte hprelstr   = "HEAPRELEASE"
 byte hpavlstr   = "HEAPAVAIL"
-byte sysmods[] // overlay with exported strings
 word memsetstr  = "MEMSET"
 byte memcpystr  = "MEMCPY"
 byte uisgtstr   = "ISUGT"
@@ -84,7 +83,6 @@ byte divmodstr  = "DIVMOD"
 byte machidstr  = "MACHID"
 byte sysstr     = "SYSCALL"
 byte callstr    = "CALL"
-byte prefix[] // overlay with exported symbols table
 word exports    = @sysmodstr, @version
 word            = @sysstr,    @syscall
 word            = @callstr,   @call
@@ -98,6 +96,7 @@ word            = @getcstr,   @cin
 word            = @getsstr,   @rdstr
 word            = @toupstr,   @toupper
 word            = @hpmarkstr, @markheap
+byte sysmods[] // overlay with exported strings
 word            = @hpallocstr,@allocheap
 word            = @hpalignstr,@allocalignheap
 word            = @hprelstr,  @releaseheap
@@ -1174,9 +1173,6 @@ def catalog(path)#0
     byte i, type, len
     word entry
 
-    if !^path
-        path = @prefix
-    fin
     refnum = open(path)
     if perr
         return
@@ -1320,23 +1316,25 @@ end
 // Command line processor
 //
 def docmds#0
-    strcpy(getlnbuf, @cmdln)
+    word prefix
-    while 1
+
+    prefix = pfxop(heap, GET_PFX)
+    repeat
         if ^getlnbuf
             strcpy(@cmdln, getlnbuf)
             when toupper(parsecmd(getlnbuf))
                 is 'C'
-                    catalog(getlnbuf)
+                    catalog(^getlnbuf ?? getlnbuf :: prefix)
                     break
                 is 'P'
                     pfxop(getlnbuf, SET_PFX)
                     break
                 is '/'
                     repeat
-                        prefix--
+                        ^prefix--
-                    until prefix[prefix] == '/'
+                    until ^(prefix + ^prefix) == '/'
-                    if prefix > 1
+                    if ^prefix > 1
-                        pfxop(@prefix, SET_PFX)
+                        pfxop(prefix, SET_PFX)
                     fin
                     break
                 is 'V'
@@ -1346,6 +1344,9 @@ def docmds#0
                     execsys(getlnbuf)
                     break
                 is '+'
+                    //
+					// Exec module
+					//
                     execmod(striptrail(getlnbuf))
                     //
                     // Clean up
@@ -1361,9 +1362,9 @@ def docmds#0
 		crout()
             fin
         fin
-        prstr(pfxop(@prefix, GET_PFX))
+        prstr(pfxop(prefix, GET_PFX))
         rdstr($BA)
-    loop
+    until 0
 end
 //
 // Dummy definition to get free heap
@@ -1377,7 +1378,7 @@ heap = @lastdef
 //
 // Print PLASMA version
 //
-prstr("PLASMA 2.0 ALPHA2 64K\n")//; prbyte(version.1); cout('.'); prbyte(version.0); crout
+prstr("PLASMA 2.0 64K\n")//; prbyte(version.1); cout('.'); prbyte(version.0); crout
 //
 // Init symbol table.
 //
@@ -1398,13 +1399,14 @@ syscmdln = @cmdln
 autorun = open(@autorun)
 if autorun
     cmdln = read(autorun, @cmdln+1, 81)
+    strcpy(getlnbuf, @cmdln)
     close(0)
 else
+    ^getlnbuf = 0
     //
     // Print some startup info.
     //
     prstr("MEM FREE:$"); prword(availheap); crout
 fin
-pfxop(@prefix, GET_PFX)
 docmds
 done

src/vmsrc/apple/cmdjit.pla

@@ -90,7 +90,6 @@ byte hpalignstr = "HEAPALLOCALIGN"
 byte hpallocstr = "HEAPALLOC"
 byte hprelstr   = "HEAPRELEASE"
 byte hpavlstr   = "HEAPAVAIL"
-byte sysmods[] // overlay with exported strings
 word memsetstr  = "MEMSET"
 byte memcpystr  = "MEMCPY"
 byte uisgtstr   = "ISUGT"
@@ -102,7 +101,6 @@ byte divmodstr  = "DIVMOD"
 byte machidstr  = "MACHID"
 byte sysstr     = "SYSCALL"
 byte callstr    = "CALL"
-byte prefix[] // overlay with exported symbols table
 word exports    = @sysmodstr, @version
 word            = @sysstr,    @syscall
 word            = @callstr,   @call
@@ -116,6 +114,7 @@ word            = @getcstr,   @cin
 word            = @getsstr,   @rdstr
 word            = @toupstr,   @toupper
 word            = @hpmarkstr, @markheap
+byte sysmods[] // overlay with exported strings
 word            = @hpallocstr,@allocheap
 word            = @hpalignstr,@allocalignheap
 word            = @hprelstr,  @releaseheap
@@ -1239,9 +1238,6 @@ def catalog(path)#0
     byte i, type, len
     word entry
 
-    if !^path
-        path = @prefix
-    fin
     refnum = open(path)
     if perr
         return
@@ -1387,26 +1383,28 @@ end
 // Command line processor
 //
 def docmds#0
+    word prefix
+
     loadmod(jitmod)  // Cannot do this in init code - it will overwrite it!
     xheap    = $0400 // Reset heap to point at low memory
     xheaptop = $A000 // Top below JITC
-    strcpy(getlnbuf, @cmdln)
+    prefix   = pfxop(heap, GET_PFX)
-    while 1
+    repeat
         if ^getlnbuf
             strcpy(@cmdln, getlnbuf)
             when toupper(parsecmd(getlnbuf))
                 is 'C'
-                    catalog(getlnbuf)
+                    catalog(^getlnbuf ?? getlnbuf :: prefix)
                     break
                 is 'P'
                     pfxop(getlnbuf, SET_PFX)
                     break
                 is '/'
                     repeat
-                        prefix--
+                        ^prefix--
-                    until prefix[prefix] == '/'
+                    until ^(prefix + ^prefix) == '/'
-                    if prefix > 1
+                    if ^prefix > 1
-                        pfxop(@prefix, SET_PFX)
+                        pfxop(prefix, SET_PFX)
                     fin
                     break
                 is 'V'
@@ -1438,9 +1436,9 @@ def docmds#0
 		crout()
             fin
         fin
-        prstr(pfxop(@prefix, GET_PFX))
+        prstr(pfxop(prefix, GET_PFX))
         rdstr($BA)
-    loop
+    until 0
 end
 //
 // Dummy definition to get free heap
@@ -1454,7 +1452,7 @@ heap = @lastdef
 //
 // Print PLASMA version
 //
-prstr("PLASMA 2.0 ALPHA2 128K\n")//; prbyte(version.1); cout('.'); prbyte(version.0); crout
+prstr("PLASMA 2.0 128K\n")//; prbyte(version.1); cout('.'); prbyte(version.0); crout
 //
 // Init symbol table.
 //
@@ -1475,13 +1473,14 @@ syscmdln = @cmdln
 autorun = open(@autorun)
 if autorun
     cmdln = read(autorun, @cmdln+1, 81)
+    strcpy(getlnbuf, @cmdln)
     close(0)
 else
+    ^getlnbuf = 0
     //
     // Print some startup info.
     //
     prstr("MEM FREE:$"); prword(availheap); crout
 fin
-pfxop(@prefix, GET_PFX)
 docmds
 done

src/vmsrc/apple/soscmd.pla

@@ -173,6 +173,7 @@ def shell#1
     byte prefix[64]
     byte err[]
     word cmdptr
+
     //
     // Copy AUTORUN commmand line
     //
@@ -180,6 +181,7 @@ def shell#1
     //
     // Handle commands.
     //
+    getpfx(@prefix))
     repeat
         if ^cmdptr
             when toupper(parsecmd(cmdptr))
@@ -210,9 +212,7 @@ def shell#1
                     volumes
                     break
                 is '+'
-					//cmdsys:modexec(striptrail(cmdptr))
                     return striptrail(cmdptr)
-                    //cmdsys:syswrite(cmdsys.refcons, @textmode, 3)
                     break
                 otherwise
                     puts("?\n")

src/vmsrc/apple/soscmdjit.pla

@@ -248,6 +248,7 @@ def shell#1
     byte prefix[64]
     byte err[]
     word cmdptr
+
     //
     // Copy AUTORUN commmand line
     //
@@ -255,6 +256,7 @@ def shell#1
     //
     // Handle commands.
     //
+    getpfx(@prefix))
     repeat
         if ^cmdptr
             when toupper(parsecmd(cmdptr))
@@ -286,9 +288,7 @@ def shell#1
                     break
                 is '+'
 					*jitcodeptr = jitcbuf
-                    //cmdsys:modexec(striptrail(cmdptr))
                     return striptrail(cmdptr)
-                    //cmdsys:syswrite(cmdsys.refcons, @textmode, 3)
                     break
                 otherwise
                     puts("?\n")

src/vmsrc/apple/sossys.pla

@@ -106,7 +106,6 @@ byte uisltstr[]   = "ISULT"
 byte uislestr[]   = "ISULE"
 byte sextstr[]    = "SEXT"
 byte divmodstr[]  = "DIVMOD"
-byte sysmods[]    = "" // overlay sys path with exports
 word exports[]    = @sysmodstr, @version
 word              = @sysstr,    @syscall
 word              = @callstr,   @call
@@ -119,6 +118,7 @@ word              = @putwstr,   @prword
 word              = @getcstr,   @cin
 word              = @getsstr,   @rdstr
 word              = @toupstr,   @toupper
+byte sysmods[] // overlay sys path with exports
 word              = @hpmarkstr, @markheap
 word              = @hpallocstr,@allocheap
 word              = @hpalignstr,@allocalignheap
@@ -1263,7 +1263,7 @@ cmdlnptr = @cmdln
 // Print PLASMA version
 //
 init_cons
-prstr("PLASMA 2.0 ALPHA2\n")//; putb(version.1); putc('.'); putb(version.0); putln
+prstr("PLASMA 2.0\n")//; putb(version.1); putc('.'); putb(version.0); putln
 prstr("MEM:$"); prword(availheap); crout
 //
 // Exec command line parser

src/vmsrc/apple/sossysjit.pla

@@ -117,7 +117,6 @@ byte uisltstr[]   = "ISULT"
 byte uislestr[]   = "ISULE"
 byte sextstr[]    = "SEXT"
 byte divmodstr[]  = "DIVMOD"
-byte sysmods[]    = "" // overlay sys path with exports
 word exports[]    = @sysmodstr, @version
 word              = @sysstr,    @syscall
 word              = @callstr,   @call
@@ -130,6 +129,7 @@ word              = @putwstr,   @prword
 word              = @getcstr,   @cin
 word              = @getsstr,   @rdstr
 word              = @toupstr,   @toupper
+byte sysmods[] // overlay sys path with exports
 word              = @hpmarkstr, @markheap
 word              = @hpallocstr,@allocheap
 word              = @hpalignstr,@allocalignheap
@@ -1286,7 +1286,7 @@ cmdlnptr = @cmdln
 // Print PLASMA version
 //
 init_cons
-prstr("PLASMA 2.0 ALPHA2 JITC\n")//; putb(version.1); putc('.'); putb(version.0); putln
+prstr("PLASMA 2.0 JITC\n")//; putb(version.1); putc('.'); putb(version.0); putln
 prstr("MEM:$"); prword(availheap); crout
 //
 // Exec command line parser