mirror of
https://github.com/catseye/SixtyPical.git
synced 2024-11-29 18:49:22 +00:00
292 lines
10 KiB
Plaintext
292 lines
10 KiB
Plaintext
; ribos.p65 - p65 assembly source for RIBOS:
|
|
; Demonstration of the VIC-II raster interrupt on the Commodore 64:
|
|
; Alter the border colour in the middle part of the screen only.
|
|
; Original (hardware IRQ vector) version.
|
|
; By Chris Pressey, Cat's Eye Technologies.
|
|
; This work has been placed in the public domain.
|
|
|
|
; ----- BEGIN ribos.p65 -----
|
|
|
|
; This source file is intented to be assembled to produce a PRG file
|
|
; which can be loaded into the C64's memory from a peripheral device.
|
|
; All C64 PRG files start with a 16-bit word which represents the
|
|
; location in memory to which they will be loaded. We can provide this
|
|
; using p65 directives as follows:
|
|
|
|
.org 0
|
|
.word $C000
|
|
|
|
; Now the actual assembly starts (at memory location 49152.)
|
|
|
|
.org $C000
|
|
|
|
; ----- Constants -----
|
|
|
|
; We first define some symbolic constants to add some clarity to our
|
|
; references to hardware registers and other locations in memory.
|
|
; Descriptions of the registers follow those given in the 'Commodore 64
|
|
; Programmer's Reference Guide'.
|
|
|
|
; The CIA #1 chip.
|
|
|
|
.alias cia1 $dc00 ; pp. 328-331
|
|
.alias intr_ctrl cia1+$d ; "CIA Interrupt Control Register
|
|
; (Read IRQs/Write Mask)"
|
|
|
|
; The VIC-II chip.
|
|
|
|
.alias vic $d000 ; Appendix G:
|
|
.alias vic_ctrl vic+$11 ; "Y SCROLL MODE"
|
|
.alias vic_raster vic+$12 ; "RASTER"
|
|
.alias vic_intr vic+$19 ; "Interrupt Request's" (sic)
|
|
.alias vic_intr_enable vic+$1a ; "Interrupt Request MASKS"
|
|
.alias border_color vic+$20 ; "BORDER COLOR"
|
|
|
|
; The address at which the IRQ vector is stored.
|
|
|
|
.alias irq_vec $fffe ; p. 411
|
|
|
|
; The zero-page address of the 6510's I/O register.
|
|
|
|
.alias io_ctrl $01 ; p. 310, "6510 On-Chip 8-Bit
|
|
; Input/Output Register"
|
|
|
|
; KERNAL and BASIC ROMs, p. 320
|
|
|
|
.alias kernal $e000
|
|
.alias basic $a000
|
|
|
|
; Zero-page addresses that the memory-copy routine uses for
|
|
; scratch space: "FREKZP", p. 316
|
|
|
|
.alias zp $fb
|
|
.alias stop_at $fd
|
|
|
|
; ----- Main Routine -----
|
|
|
|
; This routine is intended to be called by the user (by, e.g., SYS 49152).
|
|
; It installs the raster interrupt handler and returns to the caller.
|
|
|
|
; Key to installing the interrupt handler is altering the IRQ service
|
|
; vector. However, under normal circumstances, the address at which
|
|
; this vector is stored ($ffffe) maps to the C64's KERNAL ROM, which
|
|
; cannot be changed. So, in order to alter the vector, we must enable
|
|
; the RAM that underlies the ROM (i.e. the RAM that maps to the same
|
|
; address space as the KERNAL ROM.) If we were writing a bare-metal
|
|
; game, and didn't need any KERNAL routines or support, we could just
|
|
; switch it off. But for this demo, we'd like the raster effect to
|
|
; occur in the background as we use BASIC and whatnot, so we need to
|
|
; continue to have access to the KERNAL ROM. So what we do is copy the
|
|
; KERNAL ROM to the underlying RAM, then switch the RAM for the ROM.
|
|
|
|
jsr copy_rom_to_ram
|
|
|
|
; Interrupts can occur at any time. If one were to occur while we were
|
|
; changing the interrupt vector - for example, after we have stored the
|
|
; low byte of the address but before we have stored the high byte -
|
|
; unpredictable behaviour would result. To be safe, we disable interrupts
|
|
; with the 'sei' instruction before changing anything.
|
|
|
|
sei
|
|
|
|
; We obtain the address of the current IRQ service routine and save it
|
|
; in the variable 'saved_irq_vec'.
|
|
|
|
lda irq_vec ; save low byte
|
|
sta saved_irq_vec
|
|
lda irq_vec+1 ; save high byte
|
|
sta saved_irq_vec+1
|
|
|
|
; We then store the address of our IRQ service routine in its place.
|
|
|
|
lda #<our_service_routine
|
|
sta irq_vec
|
|
lda #>our_service_routine
|
|
sta irq_vec+1
|
|
|
|
; Now we must specify the raster line at which the interrupt gets called.
|
|
|
|
lda scanline
|
|
sta vic_raster
|
|
|
|
; Note that the position of the raster line is given by a 9-bit value,
|
|
; and we can't just assume that, because the raster line we want is less
|
|
; than 256, that the high bit will automatically be set to zero, because
|
|
; it won't. We have to explicitly set it high or low. It is found as
|
|
; the most significant bit of a VIC-II control register which has many
|
|
; different functions, so we must be careful to preserve all other bits.
|
|
|
|
lda vic_ctrl
|
|
and #%01111111
|
|
sta vic_ctrl
|
|
|
|
; Then we enable the raster interrupt on the VIC-II chip.
|
|
|
|
lda #$01
|
|
sta vic_intr_enable
|
|
|
|
; The article at everything2 suggests that we read the interrupt control
|
|
; port of the CIA #1 chip, presumably to acknowledge any pending IRQ and
|
|
; avoid the problem of having some sort of lockup due to a spurious IRQ.
|
|
; I've tested leaving this out, and the interrupt handler still seems get
|
|
; installed alright. But, I haven't tested it very demandingly, and it's
|
|
; likely to open up a race condition that I just haven't encountered (much
|
|
; like if we were to forget to execute the 'sei' instruction, above.)
|
|
; So, to play it safe, we read the port here.
|
|
|
|
lda intr_ctrl
|
|
|
|
; We re-enable interrupts to resume normal operation - normal, that is,
|
|
; except that our raster interrupt service routine will be called the next
|
|
; time the raster reaches the line stored in the 'vic_raster' register of
|
|
; the VIC-II chip.
|
|
|
|
cli
|
|
|
|
; Finally, we return to the caller.
|
|
|
|
rts
|
|
|
|
; ----- Raster Interrupt Service Routine ------
|
|
|
|
our_service_routine:
|
|
|
|
; This is an interrupt service routine (a.k.a. interrupt handler,) and as
|
|
; such, it can be called from anywhere. Since the code that was interrupted
|
|
; likely cares deeply about the values in its registers, we must be careful
|
|
; to save any that we change, and restore them before switching back to it.
|
|
; In this case, we only affect the processor flags and the accumulator, so
|
|
; we push them onto the stack.
|
|
|
|
php
|
|
pha
|
|
|
|
; The interrupt service routine on the Commodore 64 is very general-purpose,
|
|
; and may be invoked by any number of different kinds of interrupts. We,
|
|
; however, only care about a certain kind - the VIC-II's raster interrupt.
|
|
; We check to see if the current interrupt was caused by the raster by
|
|
; looking at the low bit of the VIC-II interrupt register. Note that we
|
|
; immediately store back the value found there before testing it. This is
|
|
; to acknowledge to the VIC-II chip that we got the interrupt. If we don't
|
|
; do this, it won't send us another interrupt next time.
|
|
|
|
lda vic_intr
|
|
sta vic_intr
|
|
and #$01
|
|
cmp #$01
|
|
beq we_handle_it
|
|
|
|
; If the interrupt was not caused by the raster, we restore the values
|
|
; of the registers from the stack, and continue execution as normal with
|
|
; the existing interrupt service routine.
|
|
|
|
pla
|
|
plp
|
|
jmp (saved_irq_vec)
|
|
|
|
we_handle_it:
|
|
|
|
; If we got here, the interrupt _was_ caused by the raster. So, we get
|
|
; to do our thing. To keep things simple, we just invert the border colour.
|
|
|
|
lda border_color
|
|
eor #$ff
|
|
sta border_color
|
|
|
|
; Now, we make the interrupt trigger on a different scan line so that we'll
|
|
; invert the colour back to normal lower down on the screen.
|
|
|
|
lda scanline
|
|
eor #$ff
|
|
sta scanline
|
|
sta vic_raster
|
|
|
|
; Restore the registers that we saved at the beginning of this routine.
|
|
|
|
pla
|
|
plp
|
|
|
|
; Return to normal operation. Note that we must issue an 'rti' instruction
|
|
; here, not 'rts', as we are returning from an interrupt.
|
|
|
|
rti
|
|
|
|
|
|
; ----- Utility Routine: copy KERNAL ROM to underlying RAM -----
|
|
|
|
copy_rom_to_ram:
|
|
|
|
; This is somewhat more involved than I let on above. The memory mapping
|
|
; facilities of the C64 are a bit convoluted. The Programmer's Reference
|
|
; Guide states on page 261 that the way to map out the KERNAL ROM, and
|
|
; map in the RAM underlying it, is to set the HIRAM signal on the 6510's
|
|
; I/O line (which is memory-mapped to address $0001) to 0. This is true.
|
|
; However, it is not the whole story: setting HIRAM to 0 *also* maps out
|
|
; BASIC ROM and maps in the RAM underlying *it*. I suppose this makes
|
|
; sense from a design point of view; after all, BASIC uses the KERNAL, so
|
|
; there wouldn't be much sense leaving it mapped when the KERNAL is mapped
|
|
; out. Anyway, what this means for us is that we must copy both of these
|
|
; ROMs to their respective underlying RAMs if we want to survive returning
|
|
; to BASIC.
|
|
|
|
ldx #>basic
|
|
ldy #$c0
|
|
jsr copy_block
|
|
|
|
ldx #>kernal
|
|
ldy #$00
|
|
jsr copy_block
|
|
|
|
; To actually substitute the RAM for the ROM in the memory map, we
|
|
; set HIRAM (the second least significant bit) to 0.
|
|
|
|
lda io_ctrl
|
|
and #%11111101
|
|
sta io_ctrl
|
|
|
|
rts
|
|
|
|
|
|
; ----- Utility Routine: copy a ROM memory block to the underlying RAM -----
|
|
|
|
; Input: x register = high byte of start address (low byte = #$00)
|
|
; y register = high byte of end address (stops at address $yy00 - 1)
|
|
|
|
; This subroutine is a fairly straightforward memory copy loop. A somewhat
|
|
; counter-intuitive feature is that we immediately store each byte in the
|
|
; same location where we just read it from. We can do this because, even
|
|
; when the KERNAL or BASIC ROM is mapped in, writes to those locations still
|
|
; go to the underlying RAM.
|
|
|
|
copy_block: stx zp+1
|
|
sty stop_at
|
|
ldy #$00
|
|
sty zp
|
|
|
|
copy_loop: lda (zp), y
|
|
sta (zp), y
|
|
iny
|
|
cpy #$00
|
|
bne copy_loop
|
|
ldx zp+1
|
|
inx
|
|
stx zp+1
|
|
cpx stop_at
|
|
bne copy_loop
|
|
rts
|
|
|
|
; ----- Variables -----
|
|
|
|
; 'scanline' stores the raster line that we want the interrupt to trigger
|
|
; on; it gets loaded into the VIC-II's 'vic_raster' register.
|
|
|
|
scanline: .byte %01010101
|
|
|
|
; We also reserve space to store the address of the interrupt service
|
|
; routine that we are replacing in the IRQ vector, so that we can transfer
|
|
; control to it at the end of our routine.
|
|
|
|
.space saved_irq_vec 2
|
|
|
|
; ----- END of ribos.p65 -----
|