Commander X16-specific information for cc65 <author><url url="mailto:greg.king5@verizon.net" name="Greg King"> <abstract> An overview over the CX16 run-time system as it's implemented for the cc65 C compiler. </abstract> <!-- Table of contents --> <toc> <!-- Begin the document --> <sect>Overview<p> The Commander X16 is a modern small computer with firmware that is based partly on the ROMs in Commodore's VIC-20 and 64C. It has a couple of I/O chips (WDC65C22 VIA) that are like the ones in the VIC-20. It supports file storage on Secure Digital cards. It allows two joysticks and a mouse. It has three sound devices. It's VGA screen has twice the range of the C64 (similar to the C128's 80-column screen), with 256 colors. This file contains an overview of the CX16 run-time system as it comes with the cc65 C compiler. It describes the memory layout, CX16-specific header files, available drivers, and any pitfalls specific to that platform. Please note that CX16-specific functions just are mentioned here; they might be described in detail in the separate <url url="funcref.html" name="function reference">. Even functions marked as "platform dependent" may be available on more than one platform. Please see the function reference for more information. <sect>Binary format<p> The standard binary output format generated by the linker for the CX16 target is a machine language program that's prepended with a 16-bit load address and a one-line BASIC stub which calls the machine language part via SYS. That means that a program can be loaded as a BASIC program, and started with RUN. It is, of course, possible to change that behaviour by using a modified program-header file and linker config. <sect>Memory layout<p> cc65-generated programs with the default setup run with the I/O area, RAM bank one, and the Kernal ROM being visible. That means that Kernal entry points can be called directly. The usable memory ranges are $0800 - $9EFF, $0400 - $07FF, and $A000 - $BFFF. Special locations: <descrip> <tag/Stack/ The C run-time stack is located at $9EFF, and grows downward. <tag/Heap/ The C heap is located at the end of the program, and grows toward the C run-time stack. <tag/Bank RAM/ Bank RAM is located at $A000 - $BFFF. It's an eight-Kibibyte window into a half Mebibyte or two Mebibytes of banked RAM. <tag/Bank ROM/ Bank ROM is located at $C000 - $FFFF. It's a sixteen-Kibibyte window into 128 Kibibytes of banked ROM. </descrip><p> <sect>Linker configurations<p> The ld65 linker comes with a default config. file for the Commander X16, which is used via <tt/-t cx16/. The cx16 package comes with additional secondary linker config. files which are used via <tt/-t cx16 -C <configfile>/. Those files use 94 bytes in the zero page. (The rest of page zero is reserved for Kernal and BASIC.) <sect1>Default config. file (<tt/cx16.cfg/)<p> The default configuration is tailored to C programs. It supplies the load address and a small BASIC stub that starts the compiled program using a SYS command. <sect1><tt/cx16-asm.cfg/<p> This configuration is made for Assembly programmers who don't need a special setup. The default start address is $0801. It can be changed with the linker command-line option <tt/--start-addr/ or <tt/-S/. All standard segments, with the exception of <tt/ZEROPAGE/, are written to the output file; and, a two-byte load address is prepended. To use that config. file, assemble with <tt/-t cx16/, and link with <tt/-C cx16-asm.cfg/. The former will make sure that the correct character translations are in effect, while the latter supplies the actual config. When using <tt/cl65/, use both command-line options. Sample command line for <tt/cl65/: <tscreen><verb> cl65 -o file.prg -t cx16 -C cx16-asm.cfg source.s </verb></tscreen> To generate code that loads to $A000: <tscreen><verb> cl65 -o file.prg -Wl -S,$A000 -t cx16 -C cx16-asm.cfg source.s </verb></tscreen> It also is possible to add a small BASIC header to the program, that uses SYS to jump to the program entry point (which is the start of the code segment). The advantage is that the program can be started using RUN. To generate a program with a BASIC SYS header, use <tscreen><verb> cl65 -o file.prg -u __EXEHDR__ -t cx16 -C cx16-asm.cfg source.s </verb></tscreen> Please note that, in this case, a changed start address doesn't make sense, because the program must be loaded to BASIC's start address. <sect>Platform-specific header files<p> Programs containing CX16-specific code may use the <tt/cx16.h/ or <tt/cbm.h/ header files. Using the later may be an option when writing code for more than one CBM-like platform, because it includes <tt/cx16.h/, and declares several functions common to all CBM-like platforms. <sect1>CX16-specific functions<p> The functions listed below are special for the CX16. See the <url url="funcref.html" name="function reference"> for declarations and usage. <itemize> <item>get_ostype <item>set_tv <item>videomode <item>vpeek <item>vpoke </itemize> <sect1>CBM-specific functions<p> Some functions are available for all (or, at least most) of the Commodore-like machines. See the <url url="funcref.html" name="function reference"> for declarations and usage. <itemize> <item>cbm_close <item>cbm_closedir <item>cbm_k_basin <item>cbm_k_bsout <item>cbm_k_chkin <item>cbm_k_ckout <item>cbm_k_close <item>cbm_k_clrch <item>cbm_k_getin <item>cbm_k_load <item>cbm_k_open <item>cbm_k_readst <item>cbm_k_save <item>cbm_k_second <item>cbm_k_setlfs <item>cbm_k_setnam <item>cbm_k_tksa <item>cbm_load <item>cbm_open <item>cbm_opendir <item>cbm_read <item>cbm_readdir <item>cbm_save <item>cbm_write <item>get_tv <item>waitvsync </itemize> <sect1>Hardware access<p> The following pseudo variables declared in the <tt/cx16.h/ header file do allow access to hardware located in the address space. Some variables are structures, accessing the struct fields will access the chip registers. <descrip> <tag><tt/VERA/</tag> The <tt/VERA/ structure allows access to the Video Enhanced Retro Adapter chip. <tag><tt/VIA1, VIA2/</tag> Access to the two VIA (Versatile Interface Adapter) chips is available via the <tt/VIA1/ and <tt/VIA2/ variables. The structure behind those variables is explained in <tt/_6522.h/. <tag><tt/BANK_RAM/</tag> A character array that mirrors the eight-Kibibyte window, at $A000, into banked RAM. </descrip><p> <sect>Loadable drivers<p> The names in the parentheses denote the symbols to be used for static linking of the drivers. The names fit into the 8.3 character limit of the SD-Card's FAT32 file-system. <sect1>Graphics drivers<p> The default drivers, <tt/tgi_stddrv (tgi_static_stddrv)/, point to <tt/cx320p1.tgi (cx320p1_tgi)/. <descrip> <tag><tt/cx320p1.tgi (cx320p1_tgi)/</tag> This driver features a resolution of 320 across and 200 down with 256 colors, and a slightly adjustable palette (the order of the colors can be changed in a way that's compatible with some of the other color drivers). </descrip><p> <sect1>Extended memory drivers<p> No extended memory drivers are available currently for the CX16. <sect1>Joystick drivers<p> The default drivers, <tt/joy_stddrv (joy_static_stddrv)/, point to <tt/cx16-std.joy (cx16_std_joy)/. <descrip> <tag><tt/cx16-std.joy (cx16_std_joy)/</tag> Supports up to two NES (and SNES) controllers connected to the joystick ports of the CX16. It reads the four directions, and the <bf/A/, <bf/B/, <bf/Select/, and <bf/Start/ buttons. Buttons <bf/A/ and <bf/B/ are the first and second fire buttons. </descrip><p> <sect1>Mouse drivers<p> The default drivers, <tt/mouse_stddrv (mouse_static_stddrv)/, point to <tt/cx16-std.mou (cx16_std_mou)/. <descrip> <tag><tt/cx16-std.mou (cx16_std_mou)/</tag> Supports a standard 3-button mouse connected to the PS/2 mouse port of the Commander X16. Currently, this driver doesn't support <tt/mouse_move()/ and <tt/mouse_setbox()/. </descrip><p> <sect1>RS232 device drivers<p> No serial drivers are available currently for the CX16. <sect>Limitations<p> The Commander X16 still is being designed. Its configuration can change at any time. Some changes could make old programs fail to work. <sect>Other hints<p> <sect1>STOP and RUN codes<p> The <tt/Esc/ key acts as Commodore's <tt/STOP/ key -- or, you can press the <tt/Ctrl/ key and the <tt/C/ key together. Pressing the <tt/Shift/ and the <tt/Esc/ keys together will type Commodore's <tt/RUN/ key. <sect1>Escape code<p> For an <tt/Esc/, press the <tt/Ctrl/ key and the <tt/[/ key together. <sect1>Passing arguments to the program<p> Command-line arguments can be passed to <tt/main()/. Because that is not supported directly by BASIC, the following syntax was chosen: <tscreen><verb> RUN:REM ARG1 " ARG2 IS QUOTED" ARG3 "" ARG5 </verb></tscreen> <enum> <item>Arguments are separated by spaces. <item>Arguments may be quoted. <item>Leading and trailing spaces around an argument are ignored. Spaces within a quoted argument are allowed. <item>The first argument passed to <tt/main()/ is the program name. <item>A maximum number of 10 arguments (including the program name) are supported. </enum> <sect1>Program return code<p> The program return code (low byte) is passed back to BASIC by the use of its <tt/ST/ variable. <sect1>Interrupts<p> The run-time for the CX16 uses routines marked as <tt/.INTERRUPTOR/ for interrupt handlers. Such routines must be written as simple machine language subroutines, and will be called automatically by the interrupt handler code if they are linked into a program. See the discussion of the <tt/.CONDES/ feature in the <url url="ca65.html" name="assembler manual">. <sect>License<p> This software is provided "as-is", without any expressed or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: <enum> <item> The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated, but is not required. <item> Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. <item> This notice may not be removed or altered from any source distribution. </enum> </article>