Commodore 64 specific information for cc65 <author>Ullrich von Bassewitz, <htmlurl url="mailto:uz@cc65.org" name="uz@cc65.org"> <date>2003-09-23 <abstract> An overview over the C64 runtime system as it is implemented for the cc65 C compiler. </abstract>  <toc>  <sect>Overview This file contains an overview of the C64 runtime system as it comes with the cc65 C compiler. It describes the memory layout, C64 specific header files, available drivers, and any pitfalls specific to that platform. Please note that C64 specific functions are just mentioned here, they are described in detail in the separate <htmlurl url="funcref.html" name="function reference">. Even functions marked as "platform dependent" may be available on more than one platform. Please see the function reference for more information. <sect>Binary format The standard binary output format generated by the linker for the C64 target is a machine language program with a one line BASIC stub. This means that a program can be loaded as BASIC program and started with RUN. It is of course possible to change this behaviour by using a modified startup file and linker config. <sect>Memory layout cc65 generated programs with the default setup run with the I/O area and the kernal ROM enabled (memory under the kernal may be used for graphics or as extended memory - see the sections about graphics and extended memory drivers). The BASIC ROM is disabled, which gives a usable memory range of $0800 - $CFFF. This means that kernal entry points may be called directly, but using the BASIC ROM is not possible without additional code. Special locations: <descrip> <tag/Text screen/ The text screen is located at $400 (as in the standard setup). <tag/Stack/ The C runtime stack is located at $CFFF and growing downwards. <tag/Heap/ The C heap is located at the end of the program and grows towards the C runtime stack. </descrip> <sect>Platform specific header files Programs containing C64 specific code may use the <tt/c64.h/ or <tt/cbm.h/ header files. Using the later may be an option when writing code for more than one CBM platform, since it includes <tt/c64.h/ and declares several functions common to all CBM platforms. <sect1>C64 specific functions The functions listed below are special for the C64. See the <htmlurl url="funcref.html" name="function reference"> for declaration and usage. <itemize> <item>get_ostype </itemize> <sect1>CBM specific functions Some functions are available for all (or at least most) of the Commodore machines. See the <htmlurl url="funcref.html" name="function reference"> for declaration and usage. <itemize> <item>cbm_close <item>cbm_closedir <item>cbm_k_setlfs <item>cbm_k_setnam <item>cbm_k_load <item>cbm_k_save <item>cbm_k_open <item>cbm_k_close <item>cbm_k_readst <item>cbm_k_chkin <item>cbm_k_ckout <item>cbm_k_basin <item>cbm_k_bsout <item>cbm_k_clrch <item>cbm_load <item>cbm_open <item>cbm_opendir <item>cbm_read <item>cbm_readdir <item>cbm_save <item>cbm_write <item>get_tv </itemize> <sect1>Hardware access The following pseudo variables declared in the <tt/c64.h/ header file do allow access to hardware located in the address space. Some variables are structures, accessing the struct fields will access the chip registers. <descrip> <tag><tt/VIC/</tag> The <tt/VIC/ structure allows access to the VIC II (the graphics controller). See the <tt/_vic2.h/ header file located in the include directory for the declaration of the structure. <tag><tt/SID/</tag> The <tt/SID/ structure allows access to the SID (the sound interface device). See the <tt/_sid.h/ header file located in the include directory for the declaration of the structure. <tag><tt/CIA1, CIA2/</tag> Access to the two CIA (complex interface adapter) chips is available via the <tt/CIA1/ and <tt/CIA2/ variables. The structure behind these variables is explained in <tt/_6526.h/. <tag><tt/COLOR_RAM/</tag> A character array that mirrors the color RAM of the C64 at $D800. </descrip> <sect>Loadable drivers <sect1>Graphics drivers Note: All available graphics drivers for the TGI interface will use the space below the I/O area and kernal ROM, so you can have hires graphics in the standard setup without any memory loss or need for a changed configuration. <descrip> <tag><tt/c64-hi.tgi/</tag> This driver features a resolution of 320*200 with two colors and an adjustable palette (that means that the two colors can be chosen out of a palette of the 16 C64 colors). </descrip> <sect1>Extended memory drivers <descrip> <tag><tt/c64-georam.emd/</tag> A driver for the GeoRam cartridge. The driver will always assume 2048 pages of 256 bytes each. There are no checks, so if your program knows better, just go ahead. <tag><tt/c64-ram.emd/</tag> A driver for the hidden RAM below the I/O area and kernal ROM. Supports 48 256 byte pages. Please note that this driver is incompatible with any of the graphics drivers! <tag><tt/c64-ramcart.emd/</tag> A driver for the RamCart 64/128 written and contributed by Maciej Witkowiak. Will test the hardware for the available RAM. <tag><tt/c64-reu.emd/</tag> A driver for the CBM REUs. The driver will determine from the connected REU if it supports 128KB of RAM or more. In the latter case, 256KB are assumed, but since there are no range checks, the application can use more memory if it has better knowledge about the hardware than the driver. <tag><tt/c64-vdc.emd/</tag> A driver for the VDC memory of the C128. Written and contributed by Maciej WitkowiakCan be used if the program is running in C64 mode of the C128. Autodetects the amount of memory available (16 or 64K) and offers 64 or 256 pages of 256 bytes each. </descrip> <sect1>Joystick drivers <descrip> <tag><tt/c64-hitjoy.joy/</tag> Driver for the Digital Excess & Hitmen adapter contributed by Groepaz. See <htmlurl url="http://www.digitalexcess.de/downloads/productions.php" name="http://www.digitalexcess.de/downloads/productions.php"> on instructions how to build one. Up to four joysticks are supported. <tag><tt/c64-ptvjoy.joy/</tag> Driver for the Protovision 4-player adapter contributed by Groepaz. See <htmlurl url="http://www.protovision-online.de/hardw/hardwstart.htm" name="http://www.protovision-online.de/hardw/hardwstart.htm"> for prices and building instructions. Up to four joysticks are supported. <tag><tt/c64-stdjoy.joy/</tag> Supports up to two standard joysticks connected to the joysticks port of the C64. </descrip> <sect1>Mouse drivers Currently no drivers available (in fact, the API for loadable mouse drivers does not exist). <sect1>RS232 device drivers <descrip> <tag><tt/c64-swlink.ser/</tag> Driver for the SwiftLink cartridge. Supports up to 38400 baud, hardware flow control (RTS/CTS) and interrupt driven receives. Note that because of the peculiarities of the 6551 chip together with the use of the NMI, transmits are not interrupt driven, and the transceiver blocks if the receiver asserts flow control because of a full buffer. </descrip> <sect>Limitations <sect>Other hints <sect1>Passing arguments to the program Command line arguments can be passed to <tt/main()/. Since this is not supported by BASIC, the following syntax was chosen: <tscreen><verb> RUN:REM ARG1 " ARG2 IS QUOTED" ARG3 "" ARG5 </verb></tscreen> <enum> <item>Arguments are separated by spaces. <item>Arguments may be quoted. <item>Leading and trailing spaces around an argument are ignored. Spaces within a quoted argument are allowed. <item>The first argument passed to <tt/main/ is the program name. <item>A maximum number of 10 arguments (including the program name) are supported. </enum> <sect1>Program return code The program return code (low byte) is passed back to BASIC by use of the <tt/ST/ variable. <sect1>Interrupts The runtime for the C64 uses routines marked as <tt/.CONDES/ type 2 for interrupt handlers. Such routines must be written as simple machine language subroutines and will be called automatically by the interrupt handler code when they are linked into a program. See the discussion of the <tt/.CONDES/ feature in the <htmlurl url="ca65.html" name="assembler manual">. <sect>Bugs/Feedback If you have problems using the library, if you find any bugs, or if you're doing something interesting with it, I would be glad to hear from you. Feel free to contact me by email (<htmlurl url="mailto:uz@cc65.org" name="uz@cc65.org">). <sect>License This software is provided 'as-is', without any expressed or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: <enum> <item> The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. <item> Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. <item> This notice may not be removed or altered from any source distribution. </enum> </article>