Oric Atmos specific information for cc65 <author>Ullrich von Bassewitz <htmlurl url="mailto:uz@cc65.org" name="uz@cc65.org"><newline> Stefan A. Haubenthal <htmlurl url="mailto:polluks@sdf.lonestar.org" name="polluks@sdf.lonestar.org"><newline> <url url="mailto:greg.king5@verizon.net" name="Greg King"> <date>2013-01-08 <abstract> An overview over the Atmos runtime system as it is implemented for the cc65 C compiler. </abstract>  <toc>  <sect>Overview This file contains an overview of the Atmos runtime system as it comes with the cc65 C compiler. It describes the memory layout, Atmos specific header files, available drivers, and any pitfalls specific to that platform. Please note that Atmos specific functions are just mentioned here, they are described in detail in the separate <htmlurl url="funcref.html" name="function reference">. Even functions marked as "platform dependent" may be available on more than one platform. Please see the function reference for more information. <sect>Binary format The standard binary output format generated by the linker for the Atmos target is a machine language program with a 17 byte tape header including a cc65 tag. The standard load and autostart address is $500. <sect>Memory layout In the standard setup, cc65 generated programs use the memory from $500 to $9800, so nearly 37K of memory (including the stack) is available. ROM calls are possible without further precautions. Special locations: <descrip> <tag/Stack/ The C runtime stack is located at $97FF and growing downwards. <tag/Heap/ The C heap is located at the end of the program and grows towards the C runtime stack. </descrip> <sect>Platform specific header files Programs containing Atmos specific code may use the <tt/atmos.h/ header file. <sect1>Atmos specific functions The functions listed below are special for the Atmos. See the <htmlurl url="funcref.html" name="function reference"> for declaration and usage. <itemize> <item>atmos_load <item>atmos_save </itemize> <sect1>Hardware access The following pseudo variables declared in the <tt/atmos.h/ header file do allow access to hardware located in the address space. Some variables are structures, accessing the struct fields will access the chip registers. <descrip> <tag><tt/VIA/</tag> Access to the VIA (versatile interface adapter) chip is available via the <tt/VIA/ variable. The structure behind this variable is explained in <tt/_6522.h/. </descrip> <sect>Loadable drivers Note: Since the Atmos doesn't have working disk I/O (see <ref id="limitations" name="section "Limitations"">), the available drivers cannot be loaded at runtime (so the term "loadable drivers" is somewhat misleading). Instead, the drivers have to be statically linked. While this may seem overhead, it has two advantages: <enum> <item>The interface is identical to the one used for other platforms and to the one for the Atmos once it has disk I/O. <item>Once disk I/O is available, existing code can be changed to load drivers at runtime with almost no effort. </enum> The names in the parentheses denote the symbols to be used for static linking of the drivers. <sect1>Graphics drivers <descrip> <tag><tt/atmos-228-200-3.tgi (atmos_228_200_3)/</tag> This driver was written by Greg King and Stefan Haubenthal. It features a resolution of 228×200 with a palette of two colors that can be chosen from the Atmos's eight colors. The driver supports a third palette-"color" that actually "flips" the pixel (it becomes the other color) that is on the screen under the graphics cursor. <tag><tt/atmos-240-200-2.tgi (atmos_240_200_2)/</tag> This driver was written by Stefan Haubenthal and Greg King. It features a resolution of 240×200 with black and white colors. It is the default graphics driver for the Atmos. </descrip> <sect1>Extended memory drivers No extended memory drivers are currently available for the Atmos. <sect1>Joystick drivers <descrip> <tag><tt/atmos-pase.joy (atmos_pase)/</tag> Supports two standard joysticks connected to the P.A.S.E. interface of the Atmos. </descrip> <sect1>Mouse drivers No mouse drivers are currently available for the Atmos. <sect1>RS232 device drivers <descrip> <tag><tt/atmos-acia.ser (atmos_acia)/</tag> Driver for the Telestrat integrated serial controller and the Atmos with a serial add-on. Note that because of the peculiarities of the 6551 chip together with the use of the NMI, transmits are not interrupt driven, and the transceiver blocks if the receiver asserts flow control because of a full buffer. </descrip> <sect>Limitations<label id="limitations"> <sect1>Disk I/O The existing library for the Atmos doesn't implement C file I/O. There is one hack for the <tt/write()/ routine in place, which will make functions work that write to <tt/stdout/ (like <tt/printf()/). However, this function has some shortcomings which won't be fixed, because it's going to be replaced anyway. To be more concrete, this limitation means that you cannot use any of the following functions (and a few others): <itemize> <item>fclose <item>fopen <item>fread <item>fprintf <item>fputc <item>fscanf <item>fwrite <item>... </itemize> <sect>Other hints <sect1>Function keys These are defined to be FUNCT + number key. <sect1>Passing arguments to the program Command line arguments can be passed to <tt/main()/. Since this is not supported by BASIC, the following syntax was chosen: <tscreen><verb> CALL#500:REM ARG1 " ARG2 IS QUOTED" ARG3 "" ARG5 </verb></tscreen> <enum> <item>Arguments are separated by spaces. <item>Arguments may be quoted. <item>Leading and trailing spaces around an argument are ignored. Spaces within a quoted argument are allowed. <item>The first argument passed to <tt/main/ is the program name. <item>A maximum number of 10 arguments (including the program name) are supported. </enum> <sect1>Interrupts The runtime for the Atmos uses routines marked as <tt/.INTERRUPTOR/ for interrupt handlers. Such routines must be written as simple machine language subroutines and will be called automatically by the interrupt handler code when they are linked into a program. See the discussion of the <tt/.CONDES/ feature in the <htmlurl url="ca65.html" name="assembler manual">. <sect>Bugs/Feedback If you have problems using the library, if you find any bugs, or if you're doing something interesting with it, I would be glad to hear from you. Feel free to contact me by email (<htmlurl url="mailto:uz@cc65.org" name="uz@cc65.org">). <sect>License This software is provided 'as-is', without any expressed or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: <enum> <item> The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. <item> Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. <item> This notice may not be removed or altered from any source distribution. </enum> </article>