llvm-6502/lib/Target/Mips/Mips16ISelDAGToDAG.cpp

323 lines
11 KiB
C++
Raw Permalink Normal View History

//===-- Mips16ISelDAGToDAG.cpp - A Dag to Dag Inst Selector for Mips16 ----===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// Subclass of MipsDAGToDAGISel specialized for mips16.
//
//===----------------------------------------------------------------------===//
#include "Mips16ISelDAGToDAG.h"
#include "MCTargetDesc/MipsBaseInfo.h"
#include "Mips.h"
#include "MipsAnalyzeImmediate.h"
#include "MipsMachineFunction.h"
#include "MipsRegisterInfo.h"
#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/SelectionDAGNodes.h"
#include "llvm/IR/CFG.h"
#include "llvm/IR/GlobalValue.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/Intrinsics.h"
#include "llvm/IR/Type.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetMachine.h"
using namespace llvm;
#define DEBUG_TYPE "mips-isel"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
bool Mips16DAGToDAGISel::runOnMachineFunction(MachineFunction &MF) {
Subtarget = &static_cast<const MipsSubtarget &>(MF.getSubtarget());
if (!Subtarget->inMips16Mode())
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
return false;
return MipsDAGToDAGISel::runOnMachineFunction(MF);
}
/// Select multiply instructions.
std::pair<SDNode*, SDNode*>
Mips16DAGToDAGISel::selectMULT(SDNode *N, unsigned Opc, SDLoc DL, EVT Ty,
bool HasLo, bool HasHi) {
SDNode *Lo = nullptr, *Hi = nullptr;
SDNode *Mul = CurDAG->getMachineNode(Opc, DL, MVT::Glue, N->getOperand(0),
N->getOperand(1));
SDValue InFlag = SDValue(Mul, 0);
if (HasLo) {
unsigned Opcode = Mips::Mflo16;
Lo = CurDAG->getMachineNode(Opcode, DL, Ty, MVT::Glue, InFlag);
InFlag = SDValue(Lo, 1);
}
if (HasHi) {
unsigned Opcode = Mips::Mfhi16;
Hi = CurDAG->getMachineNode(Opcode, DL, Ty, InFlag);
}
return std::make_pair(Lo, Hi);
}
void Mips16DAGToDAGISel::initGlobalBaseReg(MachineFunction &MF) {
MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>();
if (!MipsFI->globalBaseRegSet())
return;
MachineBasicBlock &MBB = MF.front();
MachineBasicBlock::iterator I = MBB.begin();
MachineRegisterInfo &RegInfo = MF.getRegInfo();
const TargetInstrInfo &TII = *Subtarget->getInstrInfo();
DebugLoc DL = I != MBB.end() ? I->getDebugLoc() : DebugLoc();
unsigned V0, V1, V2, GlobalBaseReg = MipsFI->getGlobalBaseReg();
const TargetRegisterClass *RC = &Mips::CPU16RegsRegClass;
V0 = RegInfo.createVirtualRegister(RC);
V1 = RegInfo.createVirtualRegister(RC);
V2 = RegInfo.createVirtualRegister(RC);
BuildMI(MBB, I, DL, TII.get(Mips::GotPrologue16), V0).
addReg(V1, RegState::Define).
addExternalSymbol("_gp_disp", MipsII::MO_ABS_HI).
addExternalSymbol("_gp_disp", MipsII::MO_ABS_LO);
BuildMI(MBB, I, DL, TII.get(Mips::SllX16), V2).addReg(V0).addImm(16);
BuildMI(MBB, I, DL, TII.get(Mips::AdduRxRyRz16), GlobalBaseReg)
.addReg(V1).addReg(V2);
}
// Insert instructions to initialize the Mips16 SP Alias register in the
// first MBB of the function.
//
void Mips16DAGToDAGISel::initMips16SPAliasReg(MachineFunction &MF) {
MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>();
if (!MipsFI->mips16SPAliasRegSet())
return;
MachineBasicBlock &MBB = MF.front();
MachineBasicBlock::iterator I = MBB.begin();
const TargetInstrInfo &TII = *Subtarget->getInstrInfo();
DebugLoc DL = I != MBB.end() ? I->getDebugLoc() : DebugLoc();
unsigned Mips16SPAliasReg = MipsFI->getMips16SPAliasReg();
BuildMI(MBB, I, DL, TII.get(Mips::MoveR3216), Mips16SPAliasReg)
.addReg(Mips::SP);
}
void Mips16DAGToDAGISel::processFunctionAfterISel(MachineFunction &MF) {
initGlobalBaseReg(MF);
initMips16SPAliasReg(MF);
}
/// getMips16SPAliasReg - Output the instructions required to put the
/// SP into a Mips16 accessible aliased register.
SDValue Mips16DAGToDAGISel::getMips16SPAliasReg() {
unsigned Mips16SPAliasReg =
MF->getInfo<MipsFunctionInfo>()->getMips16SPAliasReg();
auto PtrVT = getTargetLowering()->getPointerTy(CurDAG->getDataLayout());
return CurDAG->getRegister(Mips16SPAliasReg, PtrVT);
}
void Mips16DAGToDAGISel::getMips16SPRefReg(SDNode *Parent, SDValue &AliasReg) {
auto PtrVT = getTargetLowering()->getPointerTy(CurDAG->getDataLayout());
SDValue AliasFPReg = CurDAG->getRegister(Mips::S0, PtrVT);
if (Parent) {
switch (Parent->getOpcode()) {
case ISD::LOAD: {
LoadSDNode *SD = dyn_cast<LoadSDNode>(Parent);
switch (SD->getMemoryVT().getSizeInBits()) {
case 8:
case 16:
AliasReg = Subtarget->getFrameLowering()->hasFP(*MF)
? AliasFPReg
: getMips16SPAliasReg();
return;
}
break;
}
case ISD::STORE: {
StoreSDNode *SD = dyn_cast<StoreSDNode>(Parent);
switch (SD->getMemoryVT().getSizeInBits()) {
case 8:
case 16:
AliasReg = Subtarget->getFrameLowering()->hasFP(*MF)
? AliasFPReg
: getMips16SPAliasReg();
return;
}
break;
}
}
}
AliasReg = CurDAG->getRegister(Mips::SP, PtrVT);
return;
}
bool Mips16DAGToDAGISel::selectAddr16(
SDNode *Parent, SDValue Addr, SDValue &Base, SDValue &Offset,
SDValue &Alias) {
SDLoc DL(Addr);
EVT ValTy = Addr.getValueType();
Alias = CurDAG->getTargetConstant(0, DL, ValTy);
// if Address is FI, get the TargetFrameIndex.
if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>(Addr)) {
Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
Offset = CurDAG->getTargetConstant(0, DL, ValTy);
getMips16SPRefReg(Parent, Alias);
return true;
}
// on PIC code Load GA
if (Addr.getOpcode() == MipsISD::Wrapper) {
Base = Addr.getOperand(0);
Offset = Addr.getOperand(1);
return true;
}
if (TM.getRelocationModel() != Reloc::PIC_) {
if ((Addr.getOpcode() == ISD::TargetExternalSymbol ||
Addr.getOpcode() == ISD::TargetGlobalAddress))
return false;
}
// Addresses of the form FI+const or FI|const
if (CurDAG->isBaseWithConstantOffset(Addr)) {
ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1));
if (isInt<16>(CN->getSExtValue())) {
// If the first operand is a FI, get the TargetFI Node
if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>
(Addr.getOperand(0))) {
Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
getMips16SPRefReg(Parent, Alias);
}
else
Base = Addr.getOperand(0);
Offset = CurDAG->getTargetConstant(CN->getZExtValue(), DL, ValTy);
return true;
}
}
// Operand is a result from an ADD.
if (Addr.getOpcode() == ISD::ADD) {
// When loading from constant pools, load the lower address part in
// the instruction itself. Example, instead of:
// lui $2, %hi($CPI1_0)
// addiu $2, $2, %lo($CPI1_0)
// lwc1 $f0, 0($2)
// Generate:
// lui $2, %hi($CPI1_0)
// lwc1 $f0, %lo($CPI1_0)($2)
if (Addr.getOperand(1).getOpcode() == MipsISD::Lo ||
Addr.getOperand(1).getOpcode() == MipsISD::GPRel) {
SDValue Opnd0 = Addr.getOperand(1).getOperand(0);
if (isa<ConstantPoolSDNode>(Opnd0) || isa<GlobalAddressSDNode>(Opnd0) ||
isa<JumpTableSDNode>(Opnd0)) {
Base = Addr.getOperand(0);
Offset = Opnd0;
return true;
}
}
// If an indexed floating point load/store can be emitted, return false.
const LSBaseSDNode *LS = dyn_cast<LSBaseSDNode>(Parent);
if (LS) {
if (LS->getMemoryVT() == MVT::f32 && Subtarget->hasMips4_32r2())
return false;
if (LS->getMemoryVT() == MVT::f64 && Subtarget->hasMips4_32r2())
return false;
}
}
Base = Addr;
Offset = CurDAG->getTargetConstant(0, DL, ValTy);
return true;
}
/// Select instructions not customized! Used for
/// expanded, promoted and normal instructions
std::pair<bool, SDNode*> Mips16DAGToDAGISel::selectNode(SDNode *Node) {
unsigned Opcode = Node->getOpcode();
SDLoc DL(Node);
///
// Instruction Selection not handled by the auto-generated
// tablegen selection should be handled here.
///
EVT NodeTy = Node->getValueType(0);
unsigned MultOpc;
switch(Opcode) {
default: break;
case ISD::SUBE:
case ISD::ADDE: {
SDValue InFlag = Node->getOperand(2), CmpLHS;
unsigned Opc = InFlag.getOpcode(); (void)Opc;
assert(((Opc == ISD::ADDC || Opc == ISD::ADDE) ||
(Opc == ISD::SUBC || Opc == ISD::SUBE)) &&
"(ADD|SUB)E flag operand must come from (ADD|SUB)C/E insn");
unsigned MOp;
if (Opcode == ISD::ADDE) {
CmpLHS = InFlag.getValue(0);
MOp = Mips::AdduRxRyRz16;
} else {
CmpLHS = InFlag.getOperand(0);
MOp = Mips::SubuRxRyRz16;
}
SDValue Ops[] = { CmpLHS, InFlag.getOperand(1) };
SDValue LHS = Node->getOperand(0);
SDValue RHS = Node->getOperand(1);
EVT VT = LHS.getValueType();
unsigned Sltu_op = Mips::SltuRxRyRz16;
SDNode *Carry = CurDAG->getMachineNode(Sltu_op, DL, VT, Ops);
unsigned Addu_op = Mips::AdduRxRyRz16;
SDNode *AddCarry = CurDAG->getMachineNode(Addu_op, DL, VT,
SDValue(Carry,0), RHS);
SDNode *Result = CurDAG->SelectNodeTo(Node, MOp, VT, MVT::Glue, LHS,
SDValue(AddCarry,0));
return std::make_pair(true, Result);
}
/// Mul with two results
case ISD::SMUL_LOHI:
case ISD::UMUL_LOHI: {
MultOpc = (Opcode == ISD::UMUL_LOHI ? Mips::MultuRxRy16 : Mips::MultRxRy16);
std::pair<SDNode*, SDNode*> LoHi = selectMULT(Node, MultOpc, DL, NodeTy,
true, true);
if (!SDValue(Node, 0).use_empty())
ReplaceUses(SDValue(Node, 0), SDValue(LoHi.first, 0));
if (!SDValue(Node, 1).use_empty())
ReplaceUses(SDValue(Node, 1), SDValue(LoHi.second, 0));
return std::make_pair(true, nullptr);
}
case ISD::MULHS:
case ISD::MULHU: {
MultOpc = (Opcode == ISD::MULHU ? Mips::MultuRxRy16 : Mips::MultRxRy16);
SDNode *Result = selectMULT(Node, MultOpc, DL, NodeTy, false, true).second;
return std::make_pair(true, Result);
}
}
return std::make_pair(false, nullptr);
}
FunctionPass *llvm::createMips16ISelDag(MipsTargetMachine &TM) {
return new Mips16DAGToDAGISel(TM);
}