llvm-6502/Makefile.config.in

#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
#
#                     The LLVM Compiler Infrastructure
#
# This file was developed by the LLVM research group and is distributed under
# the University of Illinois Open Source License. See LICENSE.TXT for details.
# 
#===------------------------------------------------------------------------===#
#
# This file is included by Makefile.common.  It defines paths and other
# values specific to a particular installation of LLVM.
#
#===------------------------------------------------------------------------===#

# Define LLVM speific info and directories
PACKAGE_NAME      := @PACKAGE_NAME@
PACKAGE_VERSION   := @PACKAGE_VERSION@
LLVM_PREFIX       := @LLVM_PREFIX@
LLVM_BINDIR       := @LLVM_BINDIR@
LLVM_LIBDIR       := @LLVM_LIBDIR@
LLVM_DATADIR      := @LLVM_DATADIR@
LLVM_DOCSDIR      := @LLVM_DOCSDIR@
LLVM_ETCDIR       := @LLVM_ETCDIR@
LLVM_INCLUDEDIR   := @LLVM_INCLUDEDIR@
LLVM_INFODIR      := @LLVM_INFODIR@
LLVM_MANDIR       := @LLVM_MANDIR@
LLVM_CONFIGTIME   := @LLVM_CONFIGTIME@
LLVM_TARBALL_NAME := @PACKAGE_NAME@-@PACKAGE_VERSION@

# Target operating system for which LLVM will be compiled.
OS=@OS@

# Target hardware architecture
ARCH=@ARCH@

# Target triple (cpu-vendor-os) for which we should generate code
TARGET_TRIPLE=@target@

# Endian-ness of the target
ENDIAN=@ENDIAN@

# Path to the C++ compiler to use.  This is an optional setting, which defaults
# to whatever your gmake defaults to.
CXX = @CXX@

# Path to the CC binary, which use used by testcases for native builds.
CC := @CC@

# Linker flags.
LDFLAGS+=@LDFLAGS@

# Libraries needed by tools
TOOLLINKOPTS=@LIBS@

# Path to the library archiver program.
AR_PATH = @AR@

# The pathnames of the programs we require to build
BISON      := @BISON@
DATE       := @DATE@
FIND       := @FIND@
FLEX       := @LEX@
GREP       := @GREP@
INSTALL    := @INSTALL@
INSTALL_SH := $(BUILD_SRC_ROOT)/autoconf/install-sh
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@
MKDIR      := @abs_top_srcdir@/autoconf/mkinstalldirs
MV         := @MV@
PAX        := @PAX@
RANLIB     := @RANLIB@
RM         := @RM@
SED        := @SED@
TAR        := @TAR@
YACC       := @YACC@

# Paths to miscellaneous programs we hope are present but might not be
BZIP2      := @BZIP2@
DOT        := @DOT@
DOXYGEN    := @DOXYGEN@
ETAGS      := @ETAGS@
ETAGSFLAGS := @ETAGSFLAGS@
GROFF      := @GROFF@
GZIP       := @GZIP@
POD2HTML   := @POD2HTML@
POD2MAN    := @POD2MAN@
PYTHON     := @PYTHON@
RUNTEST    := @RUNTEST@
TCLSH      := @TCLSH@
ZIP        := @ZIP@

# Paths to miscellaneous programs we assume are present
RPWD       := pwd
ECHO       := echo
# Determine the target for which LLVM should generate code.
LLVMGCCARCH := @target@/3.4-llvm

# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
LCC1 = @LLVMCC1@
LCC1XX = @LLVMCC1PLUS@

# Path to directory where object files should be stored during a build.
# Set OBJ_ROOT to "." if you do not want to use a separate place for
# object files.
OBJ_ROOT := .

# Path to location for LLVM C/C++ front-end. You can modify this if you
# want to override the value set by configure.
LLVMGCCDIR := @LLVMGCCDIR@

# These are options that can either be enabled here, or can be enabled on the
# make command line (ie, make ENABLE_PROFILING=1):

# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
# turned on, and Debug builds are turned off.
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@

# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
#ENABLE_PROFILING = 1

# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
ENABLE_DOXYGEN = @ENABLE_DOXYGEN@

# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
#VERBOSE = 1

# Enable JIT for this platform
@JIT@

# Shared library extension for this platform.
SHLIBEXT = @SHLIBEXT@

# Executable file extension for this platform.
EXEEXT = @EXEEXT@

###########################################################################
# Directory Configuration
#	This section of the Makefile determines what is where.  To be
#	specific, there are several locations that need to be defined:
#
#	o LLVM_SRC_ROOT  : The root directory of the LLVM source code.
#	o LLVM_OBJ_ROOT  : The root directory containing the built LLVM code.
#
#	o BUILD_SRC_DIR  : The directory containing the code to build.
#	o BUILD_SRC_ROOT : The root directory of the code to build.
#
#	o BUILD_OBJ_DIR  : The directory in which compiled code will be placed.
#	o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
#
###########################################################################

# Set the object build directory.  By default, it is the current directory.
ifndef BUILD_OBJ_DIR
BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
endif

# Set the root of the object directory.
ifndef BUILD_OBJ_ROOT
BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
endif

# Set the source build directory.  That is almost always the current directory.
ifndef BUILD_SRC_DIR
BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
endif

# Set the source root directory.
ifndef BUILD_SRC_ROOT
BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
endif

# Set the LLVM object directory.
ifndef LLVM_OBJ_ROOT
ifdef LLVM_SRC_ROOT
LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
else
LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
endif
endif

# Set the LLVM source directory.
# It is typically the root directory of what we're compiling now.
ifndef LLVM_SRC_ROOT
LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
endif

# Installation directories, as provided by the configure script.
abs_top_srcdir = @abs_top_srcdir@
abs_top_builddir = @abs_top_builddir@
exec_prefix = @exec_prefix@
prefix = @prefix@
program_transform_name = @program_transform_name@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@ 
localstatedir = @localstatedir@
libdir = @libdir@
bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
includedir = @includedir@
infodir = @infodir@
mandir = @mandir@