llvm-6502/test/CodeGen/R600/insert_vector_elt.ll

253 lines
9.3 KiB
LLVM
Raw Normal View History

; RUN: llc -verify-machineinstrs -march=amdgcn -mcpu=SI < %s | FileCheck -check-prefix=SI %s
; RUN: llc -verify-machineinstrs -march=amdgcn -mcpu=tonga < %s | FileCheck -check-prefix=SI %s
; FIXME: Broken on evergreen
; FIXME: For some reason the 8 and 16 vectors are being stored as
; individual elements instead of 128-bit stores.
; FIXME: Why is the constant moved into the intermediate register and
; not just directly into the vector component?
; SI-LABEL: {{^}}insertelement_v4f32_0:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; s_load_dwordx4 s{{[}}[[LOW_REG:[0-9]+]]:
; v_mov_b32_e32
; v_mov_b32_e32 [[CONSTREG:v[0-9]+]], 5.000000e+00
; v_mov_b32_e32 v[[LOW_REG]], [[CONSTREG]]
; buffer_store_dwordx4 v{{[}}[[LOW_REG]]:
define void @insertelement_v4f32_0(<4 x float> addrspace(1)* %out, <4 x float> %a) nounwind {
%vecins = insertelement <4 x float> %a, float 5.000000e+00, i32 0
store <4 x float> %vecins, <4 x float> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}insertelement_v4f32_1:
define void @insertelement_v4f32_1(<4 x float> addrspace(1)* %out, <4 x float> %a) nounwind {
%vecins = insertelement <4 x float> %a, float 5.000000e+00, i32 1
store <4 x float> %vecins, <4 x float> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}insertelement_v4f32_2:
define void @insertelement_v4f32_2(<4 x float> addrspace(1)* %out, <4 x float> %a) nounwind {
%vecins = insertelement <4 x float> %a, float 5.000000e+00, i32 2
store <4 x float> %vecins, <4 x float> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}insertelement_v4f32_3:
define void @insertelement_v4f32_3(<4 x float> addrspace(1)* %out, <4 x float> %a) nounwind {
%vecins = insertelement <4 x float> %a, float 5.000000e+00, i32 3
store <4 x float> %vecins, <4 x float> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}insertelement_v4i32_0:
define void @insertelement_v4i32_0(<4 x i32> addrspace(1)* %out, <4 x i32> %a) nounwind {
%vecins = insertelement <4 x i32> %a, i32 999, i32 0
store <4 x i32> %vecins, <4 x i32> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_mov_b32_e32 [[CONST:v[0-9]+]], 0x40a00000
; SI: v_movreld_b32_e32 v[[LOW_RESULT_REG:[0-9]+]], [[CONST]]
; SI: buffer_store_dwordx2 {{v\[}}[[LOW_RESULT_REG]]:
define void @dynamic_insertelement_v2f32(<2 x float> addrspace(1)* %out, <2 x float> %a, i32 %b) nounwind {
%vecins = insertelement <2 x float> %a, float 5.000000e+00, i32 %b
store <2 x float> %vecins, <2 x float> addrspace(1)* %out, align 8
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v4f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_mov_b32_e32 [[CONST:v[0-9]+]], 0x40a00000
; SI: v_movreld_b32_e32 v[[LOW_RESULT_REG:[0-9]+]], [[CONST]]
; SI: buffer_store_dwordx4 {{v\[}}[[LOW_RESULT_REG]]:
define void @dynamic_insertelement_v4f32(<4 x float> addrspace(1)* %out, <4 x float> %a, i32 %b) nounwind {
%vecins = insertelement <4 x float> %a, float 5.000000e+00, i32 %b
store <4 x float> %vecins, <4 x float> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v8f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v8f32(<8 x float> addrspace(1)* %out, <8 x float> %a, i32 %b) nounwind {
%vecins = insertelement <8 x float> %a, float 5.000000e+00, i32 %b
store <8 x float> %vecins, <8 x float> addrspace(1)* %out, align 32
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v16f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v16f32(<16 x float> addrspace(1)* %out, <16 x float> %a, i32 %b) nounwind {
%vecins = insertelement <16 x float> %a, float 5.000000e+00, i32 %b
store <16 x float> %vecins, <16 x float> addrspace(1)* %out, align 64
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx2
define void @dynamic_insertelement_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> %a, i32 %b) nounwind {
%vecins = insertelement <2 x i32> %a, i32 5, i32 %b
store <2 x i32> %vecins, <2 x i32> addrspace(1)* %out, align 8
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx4
define void @dynamic_insertelement_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> %a, i32 %b) nounwind {
%vecins = insertelement <4 x i32> %a, i32 5, i32 %b
store <4 x i32> %vecins, <4 x i32> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v8i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v8i32(<8 x i32> addrspace(1)* %out, <8 x i32> %a, i32 %b) nounwind {
%vecins = insertelement <8 x i32> %a, i32 5, i32 %b
store <8 x i32> %vecins, <8 x i32> addrspace(1)* %out, align 32
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v16i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v16i32(<16 x i32> addrspace(1)* %out, <16 x i32> %a, i32 %b) nounwind {
%vecins = insertelement <16 x i32> %a, i32 5, i32 %b
store <16 x i32> %vecins, <16 x i32> addrspace(1)* %out, align 64
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2i16:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx2
define void @dynamic_insertelement_v2i16(<2 x i16> addrspace(1)* %out, <2 x i16> %a, i32 %b) nounwind {
%vecins = insertelement <2 x i16> %a, i16 5, i32 %b
store <2 x i16> %vecins, <2 x i16> addrspace(1)* %out, align 8
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v4i16:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v4i16(<4 x i16> addrspace(1)* %out, <4 x i16> %a, i32 %b) nounwind {
%vecins = insertelement <4 x i16> %a, i16 5, i32 %b
store <4 x i16> %vecins, <4 x i16> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2i8:
; FIXMESI: BUFFER_STORE_USHORT
define void @dynamic_insertelement_v2i8(<2 x i8> addrspace(1)* %out, <2 x i8> %a, i32 %b) nounwind {
%vecins = insertelement <2 x i8> %a, i8 5, i32 %b
store <2 x i8> %vecins, <2 x i8> addrspace(1)* %out, align 8
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v4i8:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dword
define void @dynamic_insertelement_v4i8(<4 x i8> addrspace(1)* %out, <4 x i8> %a, i32 %b) nounwind {
%vecins = insertelement <4 x i8> %a, i8 5, i32 %b
store <4 x i8> %vecins, <4 x i8> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v8i8:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx2
define void @dynamic_insertelement_v8i8(<8 x i8> addrspace(1)* %out, <8 x i8> %a, i32 %b) nounwind {
%vecins = insertelement <8 x i8> %a, i8 5, i32 %b
store <8 x i8> %vecins, <8 x i8> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v16i8:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXMESI: buffer_store_dwordx4
define void @dynamic_insertelement_v16i8(<16 x i8> addrspace(1)* %out, <16 x i8> %a, i32 %b) nounwind {
%vecins = insertelement <16 x i8> %a, i8 5, i32 %b
store <16 x i8> %vecins, <16 x i8> addrspace(1)* %out, align 16
ret void
}
; This test requires handling INSERT_SUBREG in SIFixSGPRCopies. Check that
; the compiler doesn't crash.
; SI-LABEL: {{^}}insert_split_bb:
define void @insert_split_bb(<2 x i32> addrspace(1)* %out, i32 addrspace(1)* %in, i32 %a, i32 %b) {
entry:
%0 = insertelement <2 x i32> undef, i32 %a, i32 0
%1 = icmp eq i32 %a, 0
br i1 %1, label %if, label %else
if:
%2 = load i32 addrspace(1)* %in
%3 = insertelement <2 x i32> %0, i32 %2, i32 1
br label %endif
else:
%4 = getelementptr i32 addrspace(1)* %in, i32 1
%5 = load i32 addrspace(1)* %4
%6 = insertelement <2 x i32> %0, i32 %5, i32 1
br label %endif
endif:
%7 = phi <2 x i32> [%3, %if], [%6, %else]
store <2 x i32> %7, <2 x i32> addrspace(1)* %out
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2f64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: s_endpgm
define void @dynamic_insertelement_v2f64(<2 x double> addrspace(1)* %out, <2 x double> %a, i32 %b) nounwind {
%vecins = insertelement <2 x double> %a, double 8.0, i32 %b
store <2 x double> %vecins, <2 x double> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v2i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: s_endpgm
define void @dynamic_insertelement_v2i64(<2 x i64> addrspace(1)* %out, <2 x i64> %a, i32 %b) nounwind {
%vecins = insertelement <2 x i64> %a, i64 5, i32 %b
store <2 x i64> %vecins, <2 x i64> addrspace(1)* %out, align 8
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v4f64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: s_endpgm
define void @dynamic_insertelement_v4f64(<4 x double> addrspace(1)* %out, <4 x double> %a, i32 %b) nounwind {
%vecins = insertelement <4 x double> %a, double 8.0, i32 %b
store <4 x double> %vecins, <4 x double> addrspace(1)* %out, align 16
ret void
}
; SI-LABEL: {{^}}dynamic_insertelement_v8f64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: buffer_store_dwordx2
; SI: s_endpgm
define void @dynamic_insertelement_v8f64(<8 x double> addrspace(1)* %out, <8 x double> %a, i32 %b) nounwind {
%vecins = insertelement <8 x double> %a, double 8.0, i32 %b
store <8 x double> %vecins, <8 x double> addrspace(1)* %out, align 16
ret void
}