6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-15 20:29:48 +00:00
Code Issues Projects Releases Wiki Activity
237137532a
llvm-6502/test/DebugInfo/X86/nodebug_with_debug_loc.ll

140 lines
6.0 KiB
LLVM
Raw Normal View History

Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
; REQUIRES: object-emission
; RUN: llc -mtriple=i386-linux-gnu -filetype=obj -relocation-model=pic %s -o /dev/null
; Derived from the test case in PR20367, there's nothing really positive to
; test here (hence no FileCheck, etc). All that was wrong is that the debug info
; intrinsics (introduced by inlining) in 'f1' were causing codegen to crash, but
; since 'f1' is a nodebug function, there's no positive outcome to confirm, just
; that debug info doesn't get in the way/cause a crash.
; The test case isn't particularly well reduced/tidy, but as simple as I could
; get the C++ source. I assume the complexity is mostly just about producing a
; certain amount of register pressure, so it might be able to be simplified/made
; more uniform.
; Generated from:
; $ clang-tot -cc1 -triple i386 -emit-obj -g -O3 repro.cpp
; void sink(const void *);
; int source();
; void f3(int);
;
; extern bool b;
;
; struct string {
; unsigned *mem;
; };
;
; extern string &str;
;
; inline __attribute__((always_inline)) void s2(string *lhs) { sink(lhs->mem); }
; inline __attribute__((always_inline)) void f() {
; string str2;
; s2(&str2);
; sink(&str2);
; }
; void __attribute__((nodebug)) f1() {
; for (int iter = 0; iter != 2; ++iter) {
; f();
; sink(str.mem);
; if (b) return;
; }
; }
%struct.string = type { i32* }
@str = external constant %struct.string*
@b = external global i8
; Function Attrs: nounwind
define void @_Z2f1v() #0 {
entry:
%str2.i = alloca %struct.string, align 4
%0 = bitcast %struct.string* %str2.i to i8*, !dbg !26
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%1 = load %struct.string*, %struct.string** @str, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%mem = getelementptr inbounds %struct.string, %struct.string* %1, i32 0, i32 0
Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
br label %for.body
for.body: ; preds = %for.body, %entry
%iter.02 = phi i32 [ 0, %entry ], [ %inc, %for.body ]
call void @llvm.lifetime.start(i64 4, i8* %0), !dbg !26
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
call void @llvm.dbg.value(metadata %struct.string* %str2.i, i64 0, metadata !16, metadata !DIExpression()) #3, !dbg !26
call void @llvm.dbg.value(metadata %struct.string* %str2.i, i64 0, metadata !27, metadata !DIExpression()) #3, !dbg !29
Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
call void @_Z4sinkPKv(i8* undef) #3, !dbg !29
call void @_Z4sinkPKv(i8* %0) #3, !dbg !30
call void @llvm.lifetime.end(i64 4, i8* %0), !dbg !31
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%2 = load i32*, i32** %mem, align 4, !tbaa !32
Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
%3 = bitcast i32* %2 to i8*
call void @_Z4sinkPKv(i8* %3) #3
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%4 = load i8, i8* @b, align 1, !tbaa !37, !range !39
Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
%tobool = icmp ne i8 %4, 0
%inc = add nsw i32 %iter.02, 1
%cmp = icmp eq i32 %inc, 2
%or.cond = or i1 %tobool, %cmp
br i1 %or.cond, label %for.end, label %for.body
for.end: ; preds = %for.body
ret void
}
declare void @_Z4sinkPKv(i8*) #1
; Function Attrs: nounwind readnone
Move the complex address expression out of DIVariable and into an extra argument of the llvm.dbg.declare/llvm.dbg.value intrinsics. Previously, DIVariable was a variable-length field that has an optional reference to a Metadata array consisting of a variable number of complex address expressions. In the case of OpPiece expressions this is wasting a lot of storage in IR, because when an aggregate type is, e.g., SROA'd into all of its n individual members, the IR will contain n copies of the DIVariable, all alike, only differing in the complex address reference at the end. By making the complex address into an extra argument of the dbg.value/dbg.declare intrinsics, all of the pieces can reference the same variable and the complex address expressions can be uniqued across the CU, too. Down the road, this will allow us to move other flags, such as "indirection" out of the DIVariable, too. The new intrinsics look like this: declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr) declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr) This patch adds a new LLVM-local tag to DIExpressions, so we can detect and pretty-print DIExpression metadata nodes. What this patch doesn't do: This patch does not touch the "Indirect" field in DIVariable; but moving that into the expression would be a natural next step. http://reviews.llvm.org/D4919 rdar://problem/17994491 Thanks to dblaikie and dexonsmith for reviewing this patch! Note: I accidentally committed a bogus older version of this patch previously. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-01 18:55:02 +00:00
declare void @llvm.dbg.value(metadata, i64, metadata, metadata) #2
Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-25 16:10:16 +00:00
; Function Attrs: nounwind
declare void @llvm.lifetime.start(i64, i8* nocapture) #3
; Function Attrs: nounwind
declare void @llvm.lifetime.end(i64, i8* nocapture) #3
attributes #0 = { nounwind "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #2 = { nounwind readnone }
attributes #3 = { nounwind }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!23, !24}
!llvm.ident = !{!25}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!0 = !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.5.0 ", isOptimized: true, emissionKind: 1, file: !1, enums: !2, retainedTypes: !3, subprograms: !10, globals: !2, imports: !2)
!1 = !DIFile(filename: "<stdin>", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!2 = !{}
!3 = !{!4}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!4 = !DICompositeType(tag: DW_TAG_structure_type, name: "string", line: 7, size: 32, align: 32, file: !5, elements: !6, identifier: "_ZTS6string")
!5 = !DIFile(filename: "repro.cpp", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!6 = !{!7}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!7 = !DIDerivedType(tag: DW_TAG_member, name: "mem", line: 8, size: 32, align: 32, file: !5, scope: !"_ZTS6string", baseType: !8)
!8 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 32, align: 32, baseType: !9)
!9 = !DIBasicType(tag: DW_TAG_base_type, name: "unsigned int", size: 32, align: 32, encoding: DW_ATE_unsigned)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!10 = !{!11, !17}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!11 = !DISubprogram(name: "f", linkageName: "_Z1fv", line: 14, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, scopeLine: 14, file: !5, scope: !12, type: !13, variables: !15)
!12 = !DIFile(filename: "repro.cpp", directory: "/tmp/dbginfo")
!13 = !DISubroutineType(types: !14)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!14 = !{null}
!15 = !{!16}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!16 = !DILocalVariable(tag: DW_TAG_auto_variable, name: "str2", line: 15, scope: !11, file: !12, type: !"_ZTS6string")
!17 = !DISubprogram(name: "s2", linkageName: "_Z2s2P6string", line: 13, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, scopeLine: 13, file: !5, scope: !12, type: !18, variables: !21)
!18 = !DISubroutineType(types: !19)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!19 = !{null, !20}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!20 = !DIDerivedType(tag: DW_TAG_pointer_type, size: 32, align: 32, baseType: !"_ZTS6string")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!21 = !{!22}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!22 = !DILocalVariable(tag: DW_TAG_arg_variable, name: "lhs", line: 13, arg: 1, scope: !17, file: !12, type: !20)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!23 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231082 91177308-0d34-0410-b5e6-96231b3b80d8
2015-03-03 17:24:31 +00:00
!24 = !{i32 2, !"Debug Info Version", i32 3}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!25 = !{!"clang version 3.5.0 "}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-29 16:38:44 +00:00
!26 = !DILocation(line: 15, scope: !11)
!27 = !DILocalVariable(tag: DW_TAG_arg_variable, name: "lhs", line: 13, arg: 1, scope: !17, file: !12, type: !20)
!28 = !DILocation(line: 16, scope: !11)
!29 = !DILocation(line: 13, scope: !17, inlinedAt: !28)
!30 = !DILocation(line: 17, scope: !11)
!31 = !DILocation(line: 18, scope: !11)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:07:53 +00:00
!32 = !{!33, !34, i64 0}
!33 = !{!"_ZTS6string", !34, i64 0}
!34 = !{!"any pointer", !35, i64 0}
!35 = !{!"omnipotent char", !36, i64 0}
!36 = !{!"Simple C/C++ TBAA"}
!37 = !{!38, !38, i64 0}
!38 = !{!"bool", !35, i64 0}
!39 = !{i8 0, i8 2}
Reference in New Issue Copy Permalink