6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-14 11:32:34 +00:00
Code Issues Projects Releases Wiki Activity
2f5d14af9d
llvm-6502/test/CodeGen/X86/tls-pie.ll

74 lines
1.7 KiB
LLVM
Raw Normal View History

Fix remaining lit tests which were failing when run on an Atom processor. Patches by Tyler Nowicki, Andy Zhang, and Preston Gurd! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160520 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-19 18:53:21 +00:00
; RUN: llc < %s -march=x86 -mcpu=generic -mtriple=i386-linux-gnu -relocation-model=pic -enable-pie \
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; RUN: | FileCheck -check-prefix=X32 %s
Fix remaining lit tests which were failing when run on an Atom processor. Patches by Tyler Nowicki, Andy Zhang, and Preston Gurd! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160520 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-19 18:53:21 +00:00
; RUN: llc < %s -march=x86-64 -mcpu=generic -mtriple=x86_64-linux-gnu -relocation-model=pic -enable-pie \
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; RUN: | FileCheck -check-prefix=X64 %s
@i = thread_local global i32 15
@i2 = external thread_local global i32
define i32 @f1() {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X32-LABEL: f1:
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X32: movl %gs:i@NTPOFF, %eax
; X32-NEXT: ret
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X64-LABEL: f1:
Cleanup and relax a restriction on the matching of global offsets into x86 addressing modes. This allows PIE-based TLS offsets to fit directly into an addressing mode immediate offset, which is the last remaining code quality issue from PR12380. With this patch, that PR is completely fixed. To understand why this patch is correct to match these offsets into addressing mode immediates, break it down by cases: 1) 32-bit is trivially correct, and unmodified here. 2) 64-bit non-small mode is unchanged and never matches. 3) 64-bit small PIC code which is RIP-relative is handled specially in the match to try to fit RIP into the base register. If it fails, it now early exits. This behavior is unchanged by the patch. 4) 64-bit small non-PIC code which is not RIP-relative continues to work as it did before. The reason these immediates are safe is because the ABI ensures they fit in small mode. This behavior is unchanged. 5) 64-bit small PIC code which is *not* using RIP-relative addressing. This is the only case changed by the patch, and the primary place you see it is in TLS, either the win64 section offset TLS or Linux local-exec TLS model in a PIC compilation. Here the ABI again ensures that the immediates fit because we are in small mode, and any other operations required due to the PIC relocation model have been handled externally to the Wrapper node (extra loads etc are made around the wrapper node in ISelLowering). I've tested this as much as I can comparing it with GCC's output, and everything appears safe. I discussed this with Anton and it made sense to him at least at face value. That said, if there are issues with PIC code after this patch, yell and we can revert it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154304 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 02:13:06 +00:00
; X64: movl %fs:i@TPOFF, %eax
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X64-NEXT: ret
entry:
%tmp1 = load i32* @i
ret i32 %tmp1
}
define i32* @f2() {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X32-LABEL: f2:
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X32: movl %gs:0, %eax
; X32-NEXT: leal i@NTPOFF(%eax), %eax
; X32-NEXT: ret
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X64-LABEL: f2:
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X64: movq %fs:0, %rax
Cleanup and relax a restriction on the matching of global offsets into x86 addressing modes. This allows PIE-based TLS offsets to fit directly into an addressing mode immediate offset, which is the last remaining code quality issue from PR12380. With this patch, that PR is completely fixed. To understand why this patch is correct to match these offsets into addressing mode immediates, break it down by cases: 1) 32-bit is trivially correct, and unmodified here. 2) 64-bit non-small mode is unchanged and never matches. 3) 64-bit small PIC code which is RIP-relative is handled specially in the match to try to fit RIP into the base register. If it fails, it now early exits. This behavior is unchanged by the patch. 4) 64-bit small non-PIC code which is not RIP-relative continues to work as it did before. The reason these immediates are safe is because the ABI ensures they fit in small mode. This behavior is unchanged. 5) 64-bit small PIC code which is *not* using RIP-relative addressing. This is the only case changed by the patch, and the primary place you see it is in TLS, either the win64 section offset TLS or Linux local-exec TLS model in a PIC compilation. Here the ABI again ensures that the immediates fit because we are in small mode, and any other operations required due to the PIC relocation model have been handled externally to the Wrapper node (extra loads etc are made around the wrapper node in ISelLowering). I've tested this as much as I can comparing it with GCC's output, and everything appears safe. I discussed this with Anton and it made sense to him at least at face value. That said, if there are issues with PIC code after this patch, yell and we can revert it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154304 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 02:13:06 +00:00
; X64-NEXT: leaq i@TPOFF(%rax), %rax
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X64-NEXT: ret
entry:
ret i32* @i
}
define i32 @f3() {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X32-LABEL: f3:
Implement initial-exec TLS model for 32-bit PIC x86 This fixes a TODO from 2007 :) Previously, LLVM would emit the wrong code here (see the update to test/CodeGen/X86/tls-pie.ll). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156611 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-11 10:11:01 +00:00
; X32: calll .L{{[0-9]+}}$pb
; X32-NEXT: .L{{[0-9]+}}$pb:
; X32-NEXT: popl %eax
; X32-NEXT: .Ltmp{{[0-9]+}}:
; X32-NEXT: addl $_GLOBAL_OFFSET_TABLE_+(.Ltmp{{[0-9]+}}-.L{{[0-9]+}}$pb), %eax
In the initial exec mode we always do a load to find the address of a variable. Before this patch in pic 32 bit code we would add the global base register and not load from that address. This is a really old bug, but before the introduction of the tls attributes we would never select initial exec for pic code. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-29 04:22:35 +00:00
; X32-NEXT: movl i2@GOTNTPOFF(%eax), %eax
; X32-NEXT: movl %gs:(%eax), %eax
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X32-NEXT: ret
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X64-LABEL: f3:
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X64: movq i2@GOTTPOFF(%rip), %rax
; X64-NEXT: movl %fs:(%rax), %eax
; X64-NEXT: ret
entry:
%tmp1 = load i32* @i2
ret i32 %tmp1
}
define i32* @f4() {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X32-LABEL: f4:
Implement initial-exec TLS model for 32-bit PIC x86 This fixes a TODO from 2007 :) Previously, LLVM would emit the wrong code here (see the update to test/CodeGen/X86/tls-pie.ll). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156611 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-11 10:11:01 +00:00
; X32: calll .L{{[0-9]+}}$pb
; X32-NEXT: .L{{[0-9]+}}$pb:
In the initial exec mode we always do a load to find the address of a variable. Before this patch in pic 32 bit code we would add the global base register and not load from that address. This is a really old bug, but before the introduction of the tls attributes we would never select initial exec for pic code. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-29 04:22:35 +00:00
; X32-NEXT: popl %ecx
Implement initial-exec TLS model for 32-bit PIC x86 This fixes a TODO from 2007 :) Previously, LLVM would emit the wrong code here (see the update to test/CodeGen/X86/tls-pie.ll). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156611 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-11 10:11:01 +00:00
; X32-NEXT: .Ltmp{{[0-9]+}}:
In the initial exec mode we always do a load to find the address of a variable. Before this patch in pic 32 bit code we would add the global base register and not load from that address. This is a really old bug, but before the introduction of the tls attributes we would never select initial exec for pic code. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-29 04:22:35 +00:00
; X32-NEXT: addl $_GLOBAL_OFFSET_TABLE_+(.Ltmp{{[0-9]+}}-.L{{[0-9]+}}$pb), %ecx
; X32-NEXT: movl %gs:0, %eax
; X32-NEXT: addl i2@GOTNTPOFF(%ecx), %eax
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X32-NEXT: ret
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
; X64-LABEL: f4:
Teach LLVM about a PIE option which, when enabled on top of PIC, makes optimizations which are valid for position independent code being linked into a single executable, but not for such code being linked into a shared library. I discussed the design of this with Eric Christopher, and the decision was to support an optional bit rather than a completely separate relocation model. Fundamentally, this is still PIC relocation, its just that certain optimizations are only valid under a PIC relocation model when the resulting code won't be in a shared library. The simplest path to here is to expose a single bit option in the TargetOptions. If folks have different/better designs, I'm all ears. =] I've included the first optimization based upon this: changing TLS models to the *Exec models when PIE is enabled. This is the LLVM component of PR12380 and is all of the hard work. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
; X64: movq %fs:0, %rax
; X64-NEXT: addq i2@GOTTPOFF(%rip), %rax
; X64-NEXT: ret
entry:
ret i32* @i2
}
Reference in New Issue Copy Permalink