llvm-6502/test/CodeGen/ARM/vfp.ll

157 lines
4.4 KiB
LLVM
Raw Normal View History

; RUN: llc < %s -mtriple=arm-apple-ios -mattr=+vfp2 -disable-post-ra | FileCheck %s
; RUN: llc < %s -mtriple=arm-apple-ios -mattr=+vfp2 -disable-post-ra -regalloc=basic | FileCheck %s
define void @test(float* %P, double* %D) {
%A = load float, float* %P ; <float> [#uses=1]
%B = load double, double* %D ; <double> [#uses=1]
store float %A, float* %P
store double %B, double* %D
ret void
}
declare float @fabsf(float)
declare double @fabs(double)
define void @test_abs(float* %P, double* %D) {
;CHECK-LABEL: test_abs:
%a = load float, float* %P ; <float> [#uses=1]
;CHECK: vabs.f32
%b = call float @fabsf( float %a ) readnone ; <float> [#uses=1]
store float %b, float* %P
%A = load double, double* %D ; <double> [#uses=1]
;CHECK: vabs.f64
%B = call double @fabs( double %A ) readnone ; <double> [#uses=1]
store double %B, double* %D
ret void
}
define void @test_add(float* %P, double* %D) {
;CHECK-LABEL: test_add:
%a = load float, float* %P ; <float> [#uses=2]
%b = fadd float %a, %a ; <float> [#uses=1]
store float %b, float* %P
%A = load double, double* %D ; <double> [#uses=2]
%B = fadd double %A, %A ; <double> [#uses=1]
store double %B, double* %D
ret void
}
define void @test_ext_round(float* %P, double* %D) {
;CHECK-LABEL: test_ext_round:
%a = load float, float* %P ; <float> [#uses=1]
;CHECK: vcvt.f64.f32
;CHECK: vcvt.f32.f64
%b = fpext float %a to double ; <double> [#uses=1]
%A = load double, double* %D ; <double> [#uses=1]
%B = fptrunc double %A to float ; <float> [#uses=1]
store double %b, double* %D
store float %B, float* %P
ret void
}
define void @test_fma(float* %P1, float* %P2, float* %P3) {
;CHECK-LABEL: test_fma:
%a1 = load float, float* %P1 ; <float> [#uses=1]
%a2 = load float, float* %P2 ; <float> [#uses=1]
%a3 = load float, float* %P3 ; <float> [#uses=1]
;CHECK: vnmls.f32
%X = fmul float %a1, %a2 ; <float> [#uses=1]
%Y = fsub float %X, %a3 ; <float> [#uses=1]
store float %Y, float* %P1
ret void
}
define i32 @test_ftoi(float* %P1) {
;CHECK-LABEL: test_ftoi:
%a1 = load float, float* %P1 ; <float> [#uses=1]
;CHECK: vcvt.s32.f32
%b1 = fptosi float %a1 to i32 ; <i32> [#uses=1]
ret i32 %b1
}
define i32 @test_ftou(float* %P1) {
;CHECK-LABEL: test_ftou:
%a1 = load float, float* %P1 ; <float> [#uses=1]
;CHECK: vcvt.u32.f32
%b1 = fptoui float %a1 to i32 ; <i32> [#uses=1]
ret i32 %b1
}
define i32 @test_dtoi(double* %P1) {
;CHECK-LABEL: test_dtoi:
%a1 = load double, double* %P1 ; <double> [#uses=1]
;CHECK: vcvt.s32.f64
%b1 = fptosi double %a1 to i32 ; <i32> [#uses=1]
ret i32 %b1
}
define i32 @test_dtou(double* %P1) {
;CHECK-LABEL: test_dtou:
%a1 = load double, double* %P1 ; <double> [#uses=1]
;CHECK: vcvt.u32.f64
%b1 = fptoui double %a1 to i32 ; <i32> [#uses=1]
ret i32 %b1
}
define void @test_utod(double* %P1, i32 %X) {
;CHECK-LABEL: test_utod:
;CHECK: vcvt.f64.u32
%b1 = uitofp i32 %X to double ; <double> [#uses=1]
store double %b1, double* %P1
ret void
}
define void @test_utod2(double* %P1, i8 %X) {
;CHECK-LABEL: test_utod2:
;CHECK: vcvt.f64.u32
%b1 = uitofp i8 %X to double ; <double> [#uses=1]
store double %b1, double* %P1
ret void
}
define void @test_cmp(float* %glob, i32 %X) {
;CHECK-LABEL: test_cmp:
entry:
%tmp = load float, float* %glob ; <float> [#uses=2]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%tmp3 = getelementptr float, float* %glob, i32 2 ; <float*> [#uses=1]
%tmp4 = load float, float* %tmp3 ; <float> [#uses=2]
%tmp.upgrd.1 = fcmp oeq float %tmp, %tmp4 ; <i1> [#uses=1]
%tmp5 = fcmp uno float %tmp, %tmp4 ; <i1> [#uses=1]
%tmp6 = or i1 %tmp.upgrd.1, %tmp5 ; <i1> [#uses=1]
;CHECK: bmi
;CHECK-NEXT: bgt
br i1 %tmp6, label %cond_true, label %cond_false
cond_true: ; preds = %entry
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction See r230786 and r230794 for similar changes to gep and load respectively. Call is a bit different because it often doesn't have a single explicit type - usually the type is deduced from the arguments, and just the return type is explicit. In those cases there's no need to change the IR. When that's not the case, the IR usually contains the pointer type of the first operand - but since typed pointers are going away, that representation is insufficient so I'm just stripping the "pointerness" of the explicit type away. This does make the IR a bit weird - it /sort of/ reads like the type of the first operand: "call void () %x(" but %x is actually of type "void ()*" and will eventually be just of type "ptr". But this seems not too bad and I don't think it would benefit from repeating the type ("void (), void () * %x(" and then eventually "void (), ptr %x(") as has been done with gep and load. This also has a side benefit: since the explicit type is no longer a pointer, there's no ambiguity between an explicit type and a function that returns a function pointer. Previously this case needed an explicit type (eg: a function returning a void() function was written as "call void () () * @x(" rather than "call void () * @x(" because of the ambiguity between a function returning a pointer to a void() function and a function returning void). No ambiguity means even function pointer return types can just be written alone, without writing the whole function's type. This leaves /only/ the varargs case where the explicit type is required. Given the special type syntax in call instructions, the regex-fu used for migration was a bit more involved in its own unique way (as every one of these is) so here it is. Use it in conjunction with the apply.sh script and associated find/xargs commands I've provided in rr230786 to migrate your out of tree tests. Do let me know if any of this doesn't cover your cases & we can iterate on a more general script/regexes to help others with out of tree tests. About 9 test cases couldn't be automatically migrated - half of those were functions returning function pointers, where I just had to manually delete the function argument types now that we didn't need an explicit function type there. The other half were typedefs of function types used in calls - just had to manually drop the * from those. import fileinput import sys import re pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)') addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$") func_end = re.compile("(?:void.*|\)\s*)\*$") def conv(match, line): if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)): return line return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():] for line in sys.stdin: sys.stdout.write(conv(re.search(pat, line), line)) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-16 23:24:18 +00:00
%tmp.upgrd.2 = tail call i32 (...) @bar( ) ; <i32> [#uses=0]
ret void
cond_false: ; preds = %entry
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction See r230786 and r230794 for similar changes to gep and load respectively. Call is a bit different because it often doesn't have a single explicit type - usually the type is deduced from the arguments, and just the return type is explicit. In those cases there's no need to change the IR. When that's not the case, the IR usually contains the pointer type of the first operand - but since typed pointers are going away, that representation is insufficient so I'm just stripping the "pointerness" of the explicit type away. This does make the IR a bit weird - it /sort of/ reads like the type of the first operand: "call void () %x(" but %x is actually of type "void ()*" and will eventually be just of type "ptr". But this seems not too bad and I don't think it would benefit from repeating the type ("void (), void () * %x(" and then eventually "void (), ptr %x(") as has been done with gep and load. This also has a side benefit: since the explicit type is no longer a pointer, there's no ambiguity between an explicit type and a function that returns a function pointer. Previously this case needed an explicit type (eg: a function returning a void() function was written as "call void () () * @x(" rather than "call void () * @x(" because of the ambiguity between a function returning a pointer to a void() function and a function returning void). No ambiguity means even function pointer return types can just be written alone, without writing the whole function's type. This leaves /only/ the varargs case where the explicit type is required. Given the special type syntax in call instructions, the regex-fu used for migration was a bit more involved in its own unique way (as every one of these is) so here it is. Use it in conjunction with the apply.sh script and associated find/xargs commands I've provided in rr230786 to migrate your out of tree tests. Do let me know if any of this doesn't cover your cases & we can iterate on a more general script/regexes to help others with out of tree tests. About 9 test cases couldn't be automatically migrated - half of those were functions returning function pointers, where I just had to manually delete the function argument types now that we didn't need an explicit function type there. The other half were typedefs of function types used in calls - just had to manually drop the * from those. import fileinput import sys import re pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)') addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$") func_end = re.compile("(?:void.*|\)\s*)\*$") def conv(match, line): if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)): return line return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():] for line in sys.stdin: sys.stdout.write(conv(re.search(pat, line), line)) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-16 23:24:18 +00:00
%tmp7 = tail call i32 (...) @baz( ) ; <i32> [#uses=0]
ret void
}
declare i1 @llvm.isunordered.f32(float, float)
declare i32 @bar(...)
declare i32 @baz(...)
define void @test_cmpfp0(float* %glob, i32 %X) {
;CHECK-LABEL: test_cmpfp0:
entry:
%tmp = load float, float* %glob ; <float> [#uses=1]
;CHECK: vcmpe.f32
%tmp.upgrd.3 = fcmp ogt float %tmp, 0.000000e+00 ; <i1> [#uses=1]
br i1 %tmp.upgrd.3, label %cond_true, label %cond_false
cond_true: ; preds = %entry
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction See r230786 and r230794 for similar changes to gep and load respectively. Call is a bit different because it often doesn't have a single explicit type - usually the type is deduced from the arguments, and just the return type is explicit. In those cases there's no need to change the IR. When that's not the case, the IR usually contains the pointer type of the first operand - but since typed pointers are going away, that representation is insufficient so I'm just stripping the "pointerness" of the explicit type away. This does make the IR a bit weird - it /sort of/ reads like the type of the first operand: "call void () %x(" but %x is actually of type "void ()*" and will eventually be just of type "ptr". But this seems not too bad and I don't think it would benefit from repeating the type ("void (), void () * %x(" and then eventually "void (), ptr %x(") as has been done with gep and load. This also has a side benefit: since the explicit type is no longer a pointer, there's no ambiguity between an explicit type and a function that returns a function pointer. Previously this case needed an explicit type (eg: a function returning a void() function was written as "call void () () * @x(" rather than "call void () * @x(" because of the ambiguity between a function returning a pointer to a void() function and a function returning void). No ambiguity means even function pointer return types can just be written alone, without writing the whole function's type. This leaves /only/ the varargs case where the explicit type is required. Given the special type syntax in call instructions, the regex-fu used for migration was a bit more involved in its own unique way (as every one of these is) so here it is. Use it in conjunction with the apply.sh script and associated find/xargs commands I've provided in rr230786 to migrate your out of tree tests. Do let me know if any of this doesn't cover your cases & we can iterate on a more general script/regexes to help others with out of tree tests. About 9 test cases couldn't be automatically migrated - half of those were functions returning function pointers, where I just had to manually delete the function argument types now that we didn't need an explicit function type there. The other half were typedefs of function types used in calls - just had to manually drop the * from those. import fileinput import sys import re pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)') addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$") func_end = re.compile("(?:void.*|\)\s*)\*$") def conv(match, line): if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)): return line return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():] for line in sys.stdin: sys.stdout.write(conv(re.search(pat, line), line)) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-16 23:24:18 +00:00
%tmp.upgrd.4 = tail call i32 (...) @bar( ) ; <i32> [#uses=0]
ret void
cond_false: ; preds = %entry
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction See r230786 and r230794 for similar changes to gep and load respectively. Call is a bit different because it often doesn't have a single explicit type - usually the type is deduced from the arguments, and just the return type is explicit. In those cases there's no need to change the IR. When that's not the case, the IR usually contains the pointer type of the first operand - but since typed pointers are going away, that representation is insufficient so I'm just stripping the "pointerness" of the explicit type away. This does make the IR a bit weird - it /sort of/ reads like the type of the first operand: "call void () %x(" but %x is actually of type "void ()*" and will eventually be just of type "ptr". But this seems not too bad and I don't think it would benefit from repeating the type ("void (), void () * %x(" and then eventually "void (), ptr %x(") as has been done with gep and load. This also has a side benefit: since the explicit type is no longer a pointer, there's no ambiguity between an explicit type and a function that returns a function pointer. Previously this case needed an explicit type (eg: a function returning a void() function was written as "call void () () * @x(" rather than "call void () * @x(" because of the ambiguity between a function returning a pointer to a void() function and a function returning void). No ambiguity means even function pointer return types can just be written alone, without writing the whole function's type. This leaves /only/ the varargs case where the explicit type is required. Given the special type syntax in call instructions, the regex-fu used for migration was a bit more involved in its own unique way (as every one of these is) so here it is. Use it in conjunction with the apply.sh script and associated find/xargs commands I've provided in rr230786 to migrate your out of tree tests. Do let me know if any of this doesn't cover your cases & we can iterate on a more general script/regexes to help others with out of tree tests. About 9 test cases couldn't be automatically migrated - half of those were functions returning function pointers, where I just had to manually delete the function argument types now that we didn't need an explicit function type there. The other half were typedefs of function types used in calls - just had to manually drop the * from those. import fileinput import sys import re pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)') addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$") func_end = re.compile("(?:void.*|\)\s*)\*$") def conv(match, line): if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)): return line return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():] for line in sys.stdin: sys.stdout.write(conv(re.search(pat, line), line)) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
2015-04-16 23:24:18 +00:00
%tmp1 = tail call i32 (...) @baz( ) ; <i32> [#uses=0]
ret void
}