llvm-6502/test/CodeGen/R600/vselect.ll

77 lines
3.3 KiB
LLVM
Raw Normal View History

;RUN: llc < %s -march=r600 -mcpu=redwood | FileCheck --check-prefix=EG-CHECK %s
;RUN: llc < %s -march=r600 -mcpu=SI -verify-machineinstrs | FileCheck --check-prefix=SI-CHECK %s
;EG-CHECK: {{^}}test_select_v2i32:
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;SI-CHECK: {{^}}test_select_v2i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
;SI-CHECK: v_cndmask_b32_e64
;SI-CHECK: v_cndmask_b32_e64
define void @test_select_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> addrspace(1)* %in0, <2 x i32> addrspace(1)* %in1) {
entry:
%0 = load <2 x i32> addrspace(1)* %in0
%1 = load <2 x i32> addrspace(1)* %in1
%cmp = icmp ne <2 x i32> %0, %1
%result = select <2 x i1> %cmp, <2 x i32> %0, <2 x i32> %1
store <2 x i32> %result, <2 x i32> addrspace(1)* %out
ret void
}
;EG-CHECK: {{^}}test_select_v2f32:
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;SI-CHECK: {{^}}test_select_v2f32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
;SI-CHECK: v_cndmask_b32_e64
;SI-CHECK: v_cndmask_b32_e64
define void @test_select_v2f32(<2 x float> addrspace(1)* %out, <2 x float> addrspace(1)* %in0, <2 x float> addrspace(1)* %in1) {
entry:
%0 = load <2 x float> addrspace(1)* %in0
%1 = load <2 x float> addrspace(1)* %in1
%cmp = fcmp une <2 x float> %0, %1
%result = select <2 x i1> %cmp, <2 x float> %0, <2 x float> %1
store <2 x float> %result, <2 x float> addrspace(1)* %out
ret void
}
;EG-CHECK: {{^}}test_select_v4i32:
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;SI-CHECK: {{^}}test_select_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
;SI-CHECK: v_cndmask_b32_e64
;SI-CHECK: v_cndmask_b32_e64
;SI-CHECK: v_cndmask_b32_e64
;SI-CHECK: v_cndmask_b32_e64
define void @test_select_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> addrspace(1)* %in0, <4 x i32> addrspace(1)* %in1) {
entry:
%0 = load <4 x i32> addrspace(1)* %in0
%1 = load <4 x i32> addrspace(1)* %in1
%cmp = icmp ne <4 x i32> %0, %1
%result = select <4 x i1> %cmp, <4 x i32> %0, <4 x i32> %1
store <4 x i32> %result, <4 x i32> addrspace(1)* %out
ret void
}
;EG-CHECK: {{^}}test_select_v4f32:
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
;EG-CHECK: CNDE_INT {{\** *}}T{{[0-9]+\.[XYZW], PV\.[XYZW], T[0-9]+\.[XYZW], T[0-9]+\.[XYZW]}}
define void @test_select_v4f32(<4 x float> addrspace(1)* %out, <4 x float> addrspace(1)* %in0, <4 x float> addrspace(1)* %in1) {
entry:
%0 = load <4 x float> addrspace(1)* %in0
%1 = load <4 x float> addrspace(1)* %in1
%cmp = fcmp une <4 x float> %0, %1
%result = select <4 x i1> %cmp, <4 x float> %0, <4 x float> %1
store <4 x float> %result, <4 x float> addrspace(1)* %out
ret void
}