llvm-6502/test/CodeGen/R600/gv-const-addrspace.ll

98 lines
3.1 KiB
LLVM
Raw Normal View History

; RUN: llc -march=r600 -mcpu=redwood < %s | FileCheck -check-prefix=EG -check-prefix=FUNC %s
; RUN: llc -march=amdgcn -mcpu=SI -verify-machineinstrs < %s | FileCheck -check-prefix=SI -check-prefix=FUNC %s
@b = internal addrspace(2) constant [1 x i16] [ i16 7 ], align 2
@float_gv = internal unnamed_addr addrspace(2) constant [5 x float] [float 0.0, float 1.0, float 2.0, float 3.0, float 4.0], align 4
; FUNC-LABEL: {{^}}float:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXME: We should be using s_load_dword here.
; SI: buffer_load_dword
; EG-DAG: MOV {{\** *}}T2.X
; EG-DAG: MOV {{\** *}}T3.X
; EG-DAG: MOV {{\** *}}T4.X
; EG-DAG: MOV {{\** *}}T5.X
; EG-DAG: MOV {{\** *}}T6.X
; EG: MOVA_INT
define void @float(float addrspace(1)* %out, i32 %index) {
entry:
%0 = getelementptr inbounds [5 x float] addrspace(2)* @float_gv, i32 0, i32 %index
%1 = load float addrspace(2)* %0
store float %1, float addrspace(1)* %out
ret void
}
@i32_gv = internal unnamed_addr addrspace(2) constant [5 x i32] [i32 0, i32 1, i32 2, i32 3, i32 4], align 4
; FUNC-LABEL: {{^}}i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXME: We should be using s_load_dword here.
; SI: buffer_load_dword
; EG-DAG: MOV {{\** *}}T2.X
; EG-DAG: MOV {{\** *}}T3.X
; EG-DAG: MOV {{\** *}}T4.X
; EG-DAG: MOV {{\** *}}T5.X
; EG-DAG: MOV {{\** *}}T6.X
; EG: MOVA_INT
define void @i32(i32 addrspace(1)* %out, i32 %index) {
entry:
%0 = getelementptr inbounds [5 x i32] addrspace(2)* @i32_gv, i32 0, i32 %index
%1 = load i32 addrspace(2)* %0
store i32 %1, i32 addrspace(1)* %out
ret void
}
%struct.foo = type { float, [5 x i32] }
@struct_foo_gv = internal unnamed_addr addrspace(2) constant [1 x %struct.foo] [ %struct.foo { float 16.0, [5 x i32] [i32 0, i32 1, i32 2, i32 3, i32 4] } ]
; FUNC-LABEL: {{^}}struct_foo_gv_load:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_load_dword
define void @struct_foo_gv_load(i32 addrspace(1)* %out, i32 %index) {
%gep = getelementptr inbounds [1 x %struct.foo] addrspace(2)* @struct_foo_gv, i32 0, i32 0, i32 1, i32 %index
%load = load i32 addrspace(2)* %gep, align 4
store i32 %load, i32 addrspace(1)* %out, align 4
ret void
}
@array_v1_gv = internal addrspace(2) constant [4 x <1 x i32>] [ <1 x i32> <i32 1>,
<1 x i32> <i32 2>,
<1 x i32> <i32 3>,
<1 x i32> <i32 4> ]
; FUNC-LABEL: {{^}}array_v1_gv_load:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; FIXME: We should be using s_load_dword here.
; SI: buffer_load_dword
define void @array_v1_gv_load(<1 x i32> addrspace(1)* %out, i32 %index) {
%gep = getelementptr inbounds [4 x <1 x i32>] addrspace(2)* @array_v1_gv, i32 0, i32 %index
%load = load <1 x i32> addrspace(2)* %gep, align 4
store <1 x i32> %load, <1 x i32> addrspace(1)* %out, align 4
ret void
}
define void @gv_addressing_in_branch(float addrspace(1)* %out, i32 %index, i32 %a) {
entry:
%0 = icmp eq i32 0, %a
br i1 %0, label %if, label %else
if:
%1 = getelementptr inbounds [5 x float] addrspace(2)* @float_gv, i32 0, i32 %index
%2 = load float addrspace(2)* %1
store float %2, float addrspace(1)* %out
br label %endif
else:
store float 1.0, float addrspace(1)* %out
br label %endif
endif:
ret void
}