llvm-6502/lib/CodeGen/MachineTraceMetrics.h

342 lines
13 KiB
C
Raw Normal View History

//===- lib/CodeGen/MachineTraceMetrics.h - Super-scalar metrics -*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the interface for the MachineTraceMetrics analysis pass
// that estimates CPU resource usage and critical data dependency paths through
// preferred traces. This is useful for super-scalar CPUs where execution speed
// can be limited both by data dependencies and by limited execution resources.
//
// Out-of-order CPUs will often be executing instructions from multiple basic
// blocks at the same time. This makes it difficult to estimate the resource
// usage accurately in a single basic block. Resources can be estimated better
// by looking at a trace through the current basic block.
//
// For every block, the MachineTraceMetrics pass will pick a preferred trace
// that passes through the block. The trace is chosen based on loop structure,
// branch probabilities, and resource usage. The intention is to pick likely
// traces that would be the most affected by code transformations.
//
// It is expensive to compute a full arbitrary trace for every block, so to
// save some computations, traces are chosen to be convergent. This means that
// if the traces through basic blocks A and B ever cross when moving away from
// A and B, they never diverge again. This applies in both directions - If the
// traces meet above A and B, they won't diverge when going further back.
//
// Traces tend to align with loops. The trace through a block in an inner loop
// will begin at the loop entry block and end at a back edge. If there are
// nested loops, the trace may begin and end at those instead.
//
// For each trace, we compute the critical path length, which is the number of
// cycles required to execute the trace when execution is limited by data
// dependencies only. We also compute the resource height, which is the number
// of cycles required to execute all instructions in the trace when ignoring
// data dependencies.
//
// Every instruction in the current block has a slack - the number of cycles
// execution of the instruction can be delayed without extending the critical
// path.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_CODEGEN_MACHINE_TRACE_METRICS_H
#define LLVM_CODEGEN_MACHINE_TRACE_METRICS_H
#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/DenseMap.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
namespace llvm {
class InstrItineraryData;
class MachineBasicBlock;
class MachineInstr;
class MachineLoop;
class MachineLoopInfo;
class MachineRegisterInfo;
class TargetInstrInfo;
class TargetRegisterInfo;
class raw_ostream;
class MachineTraceMetrics : public MachineFunctionPass {
const MachineFunction *MF;
const TargetInstrInfo *TII;
const TargetRegisterInfo *TRI;
const InstrItineraryData *ItinData;
const MachineRegisterInfo *MRI;
const MachineLoopInfo *Loops;
public:
class Ensemble;
class Trace;
static char ID;
MachineTraceMetrics();
void getAnalysisUsage(AnalysisUsage&) const;
bool runOnMachineFunction(MachineFunction&);
void releaseMemory();
void verifyAnalysis() const;
friend class Ensemble;
friend class Trace;
/// Per-basic block information that doesn't depend on the trace through the
/// block.
struct FixedBlockInfo {
/// The number of non-trivial instructions in the block.
/// Doesn't count PHI and COPY instructions that are likely to be removed.
unsigned InstrCount;
/// True when the block contains calls.
bool HasCalls;
FixedBlockInfo() : InstrCount(~0u), HasCalls(false) {}
/// Returns true when resource information for this block has been computed.
bool hasResources() const { return InstrCount != ~0u; }
/// Invalidate resource information.
void invalidate() { InstrCount = ~0u; }
};
/// Get the fixed resource information about MBB. Compute it on demand.
const FixedBlockInfo *getResources(const MachineBasicBlock*);
/// A virtual register or regunit required by a basic block or its trace
/// successors.
struct LiveInReg {
/// The virtual register required, or a register unit.
unsigned Reg;
/// For virtual registers: Minimum height of the defining instruction.
/// For regunits: Height of the highest user in the trace.
unsigned Height;
LiveInReg(unsigned Reg, unsigned Height = 0) : Reg(Reg), Height(Height) {}
};
/// Per-basic block information that relates to a specific trace through the
/// block. Convergent traces means that only one of these is required per
/// block in a trace ensemble.
struct TraceBlockInfo {
/// Trace predecessor, or NULL for the first block in the trace.
/// Valid when hasValidDepth().
const MachineBasicBlock *Pred;
/// Trace successor, or NULL for the last block in the trace.
/// Valid when hasValidHeight().
const MachineBasicBlock *Succ;
/// The block number of the head of the trace. (When hasValidDepth()).
unsigned Head;
/// The block number of the tail of the trace. (When hasValidHeight()).
unsigned Tail;
/// Accumulated number of instructions in the trace above this block.
/// Does not include instructions in this block.
unsigned InstrDepth;
/// Accumulated number of instructions in the trace below this block.
/// Includes instructions in this block.
unsigned InstrHeight;
TraceBlockInfo() :
Pred(0), Succ(0),
InstrDepth(~0u), InstrHeight(~0u),
HasValidInstrDepths(false), HasValidInstrHeights(false) {}
/// Returns true if the depth resources have been computed from the trace
/// above this block.
bool hasValidDepth() const { return InstrDepth != ~0u; }
/// Returns true if the height resources have been computed from the trace
/// below this block.
bool hasValidHeight() const { return InstrHeight != ~0u; }
/// Invalidate depth resources when some block above this one has changed.
void invalidateDepth() { InstrDepth = ~0u; HasValidInstrDepths = false; }
/// Invalidate height resources when a block below this one has changed.
void invalidateHeight() { InstrHeight = ~0u; HasValidInstrHeights = false; }
// Data-dependency-related information. Per-instruction depth and height
// are computed from data dependencies in the current trace, using
// itinerary data.
/// Instruction depths have been computed. This implies hasValidDepth().
bool HasValidInstrDepths;
/// Instruction heights have been computed. This implies hasValidHeight().
bool HasValidInstrHeights;
/// Critical path length. This is the number of cycles in the longest data
/// dependency chain through the trace. This is only valid when both
/// HasValidInstrDepths and HasValidInstrHeights are set.
unsigned CriticalPath;
/// Live-in registers. These registers are defined above the current block
/// and used by this block or a block below it.
/// This does not include PHI uses in the current block, but it does
/// include PHI uses in deeper blocks.
SmallVector<LiveInReg, 4> LiveIns;
void print(raw_ostream&) const;
};
/// InstrCycles represents the cycle height and depth of an instruction in a
/// trace.
struct InstrCycles {
/// Earliest issue cycle as determined by data dependencies and instruction
/// latencies from the beginning of the trace. Data dependencies from
/// before the trace are not included.
unsigned Depth;
/// Minimum number of cycles from this instruction is issued to the of the
/// trace, as determined by data dependencies and instruction latencies.
unsigned Height;
};
/// A trace represents a plausible sequence of executed basic blocks that
/// passes through the current basic block one. The Trace class serves as a
/// handle to internal cached data structures.
class Trace {
Ensemble &TE;
TraceBlockInfo &TBI;
unsigned getBlockNum() const { return &TBI - &TE.BlockInfo[0]; }
public:
explicit Trace(Ensemble &te, TraceBlockInfo &tbi) : TE(te), TBI(tbi) {}
void print(raw_ostream&) const;
/// Compute the total number of instructions in the trace.
unsigned getInstrCount() const {
return TBI.InstrDepth + TBI.InstrHeight;
}
/// Return the resource depth of the top/bottom of the trace center block.
/// This is the number of cycles required to execute all instructions from
/// the trace head to the trace center block. The resource depth only
/// considers execution resources, it ignores data dependencies.
/// When Bottom is set, instructions in the trace center block are included.
unsigned getResourceDepth(bool Bottom) const;
/// Return the resource length of the trace. This is the number of cycles
/// required to execute the instructions in the trace if they were all
/// independent, exposing the maximum instruction-level parallelism.
///
/// Any blocks in Extrablocks are included as if they were part of the
/// trace.
unsigned getResourceLength(ArrayRef<const MachineBasicBlock*> Extrablocks =
ArrayRef<const MachineBasicBlock*>()) const;
/// Return the length of the (data dependency) critical path through the
/// trace.
unsigned getCriticalPath() const { return TBI.CriticalPath; }
/// Return the depth and height of MI. The depth is only valid for
/// instructions in or above the trace center block. The height is only
/// valid for instructions in or below the trace center block.
InstrCycles getInstrCycles(const MachineInstr *MI) const {
return TE.Cycles.lookup(MI);
}
/// Return the slack of MI. This is the number of cycles MI can be delayed
/// before the critical path becomes longer.
/// MI must be an instruction in the trace center block.
unsigned getInstrSlack(const MachineInstr *MI) const;
/// Return the Depth of a PHI instruction in a trace center block successor.
/// The PHI does not have to be part of the trace.
unsigned getPHIDepth(const MachineInstr *PHI) const;
};
/// A trace ensemble is a collection of traces selected using the same
/// strategy, for example 'minimum resource height'. There is one trace for
/// every block in the function.
class Ensemble {
SmallVector<TraceBlockInfo, 4> BlockInfo;
DenseMap<const MachineInstr*, InstrCycles> Cycles;
friend class Trace;
void computeTrace(const MachineBasicBlock*);
void computeDepthResources(const MachineBasicBlock*);
void computeHeightResources(const MachineBasicBlock*);
unsigned computeCrossBlockCriticalPath(const TraceBlockInfo&);
void computeInstrDepths(const MachineBasicBlock*);
void computeInstrHeights(const MachineBasicBlock*);
void addLiveIns(const MachineInstr *DefMI,
ArrayRef<const MachineBasicBlock*> Trace);
protected:
MachineTraceMetrics &MTM;
virtual const MachineBasicBlock *pickTracePred(const MachineBasicBlock*) =0;
virtual const MachineBasicBlock *pickTraceSucc(const MachineBasicBlock*) =0;
explicit Ensemble(MachineTraceMetrics*);
const MachineLoop *getLoopFor(const MachineBasicBlock*) const;
const TraceBlockInfo *getDepthResources(const MachineBasicBlock*) const;
const TraceBlockInfo *getHeightResources(const MachineBasicBlock*) const;
public:
virtual ~Ensemble();
virtual const char *getName() const =0;
void print(raw_ostream&) const;
void invalidate(const MachineBasicBlock *MBB);
void verify() const;
/// Get the trace that passes through MBB.
/// The trace is computed on demand.
Trace getTrace(const MachineBasicBlock *MBB);
};
/// Strategies for selecting traces.
enum Strategy {
/// Select the trace through a block that has the fewest instructions.
TS_MinInstrCount,
TS_NumStrategies
};
/// Get the trace ensemble representing the given trace selection strategy.
/// The returned Ensemble object is owned by the MachineTraceMetrics analysis,
/// and valid for the lifetime of the analysis pass.
Ensemble *getEnsemble(Strategy);
/// Invalidate cached information about MBB. This must be called *before* MBB
/// is erased, or the CFG is otherwise changed.
///
/// This invalidates per-block information about resource usage for MBB only,
/// and it invalidates per-trace information for any trace that passes
/// through MBB.
///
/// Call Ensemble::getTrace() again to update any trace handles.
void invalidate(const MachineBasicBlock *MBB);
private:
// One entry per basic block, indexed by block number.
SmallVector<FixedBlockInfo, 4> BlockInfo;
// One ensemble per strategy.
Ensemble* Ensembles[TS_NumStrategies];
};
inline raw_ostream &operator<<(raw_ostream &OS,
const MachineTraceMetrics::Trace &Tr) {
Tr.print(OS);
return OS;
}
inline raw_ostream &operator<<(raw_ostream &OS,
const MachineTraceMetrics::Ensemble &En) {
En.print(OS);
return OS;
}
} // end namespace llvm
#endif