llvm-6502/test/CodeGen/X86/lsr-reuse.ll

; RUN: llc < %s -march=x86-64 -O3 | FileCheck %s
target datalayout = "e-p:64:64:64"
target triple = "x86_64-unknown-unknown"

; Full strength reduction reduces register pressure from 5 to 4 here.
; Instruction selection should use the FLAGS value from the dec for
; the branch. Scheduling should push the adds upwards.

; CHECK: full_me_0:
; CHECK: movsd   (%rsi), %xmm0
; CHECK: addq    $8, %rsi
; CHECK: mulsd   (%rdx), %xmm0
; CHECK: addq    $8, %rdx
; CHECK: movsd   %xmm0, (%rdi)
; CHECK: addq    $8, %rdi
; CHECK: decq    %rcx
; CHECK: jne

define void @full_me_0(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; Mostly-full strength reduction means we do full strength reduction on all
; except for the offsets.
;
; Given a choice between constant offsets -2048 and 2048, choose the negative
; value, because at boundary conditions it has a smaller encoding.
; TODO: That's an over-general heuristic. It would be better for the target
; to indicate what the encoding cost would be. Then using a 2048 offset
; would be better on x86-64, since the start value would be 0 instead of
; 2048.

; CHECK: mostly_full_me_0:
; CHECK: movsd   -2048(%rsi), %xmm0
; CHECK: mulsd   -2048(%rdx), %xmm0
; CHECK: movsd   %xmm0, -2048(%rdi)
; CHECK: movsd   (%rsi), %xmm0
; CHECK: addq    $8, %rsi
; CHECK: divsd   (%rdx), %xmm0
; CHECK: addq    $8, %rdx
; CHECK: movsd   %xmm0, (%rdi)
; CHECK: addq    $8, %rdi
; CHECK: decq    %rcx
; CHECK: jne

define void @mostly_full_me_0(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %j = add i64 %i, 256
  %Aj = getelementptr inbounds double* %A, i64 %j
  %Bj = getelementptr inbounds double* %B, i64 %j
  %Cj = getelementptr inbounds double* %C, i64 %j
  %t3 = load double* %Bj
  %t4 = load double* %Cj
  %o = fdiv double %t3, %t4
  store double %o, double* %Aj
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; A minor variation on mostly_full_me_0.
; Prefer to start the indvar at 0.

; CHECK: mostly_full_me_1:
; CHECK: movsd   (%rsi), %xmm0
; CHECK: mulsd   (%rdx), %xmm0
; CHECK: movsd   %xmm0, (%rdi)
; CHECK: movsd   -2048(%rsi), %xmm0
; CHECK: addq    $8, %rsi
; CHECK: divsd   -2048(%rdx), %xmm0
; CHECK: addq    $8, %rdx
; CHECK: movsd   %xmm0, -2048(%rdi)
; CHECK: addq    $8, %rdi
; CHECK: decq    %rcx
; CHECK: jne

define void @mostly_full_me_1(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %j = sub i64 %i, 256
  %Aj = getelementptr inbounds double* %A, i64 %j
  %Bj = getelementptr inbounds double* %B, i64 %j
  %Cj = getelementptr inbounds double* %C, i64 %j
  %t3 = load double* %Bj
  %t4 = load double* %Cj
  %o = fdiv double %t3, %t4
  store double %o, double* %Aj
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; A slightly less minor variation on mostly_full_me_0.

; CHECK: mostly_full_me_2:
; CHECK: movsd   (%rsi), %xmm0
; CHECK: mulsd   (%rdx), %xmm0
; CHECK: movsd   %xmm0, (%rdi)
; CHECK: movsd   -4096(%rsi), %xmm0
; CHECK: addq    $8, %rsi
; CHECK: divsd   -4096(%rdx), %xmm0
; CHECK: addq    $8, %rdx
; CHECK: movsd   %xmm0, -4096(%rdi)
; CHECK: addq    $8, %rdi
; CHECK: decq    %rcx
; CHECK: jne

define void @mostly_full_me_2(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %k = add i64 %i, 256
  %Ak = getelementptr inbounds double* %A, i64 %k
  %Bk = getelementptr inbounds double* %B, i64 %k
  %Ck = getelementptr inbounds double* %C, i64 %k
  %t1 = load double* %Bk
  %t2 = load double* %Ck
  %m = fmul double %t1, %t2
  store double %m, double* %Ak
  %j = sub i64 %i, 256
  %Aj = getelementptr inbounds double* %A, i64 %j
  %Bj = getelementptr inbounds double* %B, i64 %j
  %Cj = getelementptr inbounds double* %C, i64 %j
  %t3 = load double* %Bj
  %t4 = load double* %Cj
  %o = fdiv double %t3, %t4
  store double %o, double* %Aj
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; In this test, the counting IV exit value is used, so full strength reduction
; would not reduce register pressure. IndVarSimplify ought to simplify such
; cases away, but it's useful here to verify that LSR's register pressure
; heuristics are working as expected.

; CHECK: count_me_0:
; CHECK: movsd   (%rsi,%rax,8), %xmm0
; CHECK: mulsd   (%rdx,%rax,8), %xmm0
; CHECK: movsd   %xmm0, (%rdi,%rax,8)
; CHECK: incq    %rax
; CHECK: cmpq    %rax, %rcx
; CHECK: jne

define i64 @count_me_0(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  %q = phi i64 [ 0, %entry ], [ %i.next, %loop ]
  ret i64 %q
}

; In this test, the trip count value is used, so full strength reduction
; would not reduce register pressure.
; (though it would reduce register pressure inside the loop...)

; CHECK: count_me_1:
; CHECK: movsd   (%rsi,%rax,8), %xmm0
; CHECK: mulsd   (%rdx,%rax,8), %xmm0
; CHECK: movsd   %xmm0, (%rdi,%rax,8)
; CHECK: incq    %rax
; CHECK: cmpq    %rax, %rcx
; CHECK: jne

define i64 @count_me_1(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  %q = phi i64 [ 0, %entry ], [ %n, %loop ]
  ret i64 %q
}

; Full strength reduction doesn't save any registers here because the
; loop tripcount is a constant.

; CHECK: count_me_2:
; CHECK: movl    $10, %eax
; CHECK: align
; CHECK: BB7_1:
; CHECK: movsd   -40(%rdi,%rax,8), %xmm0
; CHECK: addsd   -40(%rsi,%rax,8), %xmm0
; CHECK: movsd   %xmm0, -40(%rdx,%rax,8)
; CHECK: movsd   (%rdi,%rax,8), %xmm0
; CHECK: subsd   (%rsi,%rax,8), %xmm0
; CHECK: movsd   %xmm0, (%rdx,%rax,8)
; CHECK: incq    %rax
; CHECK: cmpq    $5010, %rax
; CHECK: jne

define void @count_me_2(double* nocapture %A, double* nocapture %B, double* nocapture %C) nounwind {
entry:
  br label %loop

loop:
  %i = phi i64 [ 0, %entry ], [ %i.next, %loop ]
  %i5 = add i64 %i, 5
  %Ai = getelementptr double* %A, i64 %i5
  %t2 = load double* %Ai
  %Bi = getelementptr double* %B, i64 %i5
  %t4 = load double* %Bi
  %t5 = fadd double %t2, %t4
  %Ci = getelementptr double* %C, i64 %i5
  store double %t5, double* %Ci
  %i10 = add i64 %i, 10
  %Ai10 = getelementptr double* %A, i64 %i10
  %t9 = load double* %Ai10
  %Bi10 = getelementptr double* %B, i64 %i10
  %t11 = load double* %Bi10
  %t12 = fsub double %t9, %t11
  %Ci10 = getelementptr double* %C, i64 %i10
  store double %t12, double* %Ci10
  %i.next = add i64 %i, 1
  %exitcond = icmp eq i64 %i.next, 5000
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; This should be fully strength-reduced to reduce register pressure.

; CHECK: full_me_1:
; CHECK: align
; CHECK: BB8_1:
; CHECK: movsd   (%rdi), %xmm0
; CHECK: addsd   (%rsi), %xmm0
; CHECK: movsd   %xmm0, (%rdx)
; CHECK: movsd   40(%rdi), %xmm0
; CHECK: addq    $8, %rdi
; CHECK: subsd   40(%rsi), %xmm0
; CHECK: addq    $8, %rsi
; CHECK: movsd   %xmm0, 40(%rdx)
; CHECK: addq    $8, %rdx
; CHECK: decq    %rcx
; CHECK: jne

define void @full_me_1(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  br label %loop

loop:
  %i = phi i64 [ 0, %entry ], [ %i.next, %loop ]
  %i5 = add i64 %i, 5
  %Ai = getelementptr double* %A, i64 %i5
  %t2 = load double* %Ai
  %Bi = getelementptr double* %B, i64 %i5
  %t4 = load double* %Bi
  %t5 = fadd double %t2, %t4
  %Ci = getelementptr double* %C, i64 %i5
  store double %t5, double* %Ci
  %i10 = add i64 %i, 10
  %Ai10 = getelementptr double* %A, i64 %i10
  %t9 = load double* %Ai10
  %Bi10 = getelementptr double* %B, i64 %i10
  %t11 = load double* %Bi10
  %t12 = fsub double %t9, %t11
  %Ci10 = getelementptr double* %C, i64 %i10
  store double %t12, double* %Ci10
  %i.next = add i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}

; This is a variation on full_me_0 in which the 0,+,1 induction variable
; has a non-address use, pinning that value in a register.

; CHECK: count_me_3:
; CHECK: call
; CHECK: movsd   (%r15,%r13,8), %xmm0
; CHECK: mulsd   (%r14,%r13,8), %xmm0
; CHECK: movsd   %xmm0, (%r12,%r13,8)
; CHECK: incq    %r13
; CHECK: cmpq    %r13, %rbx
; CHECK: jne

declare void @use(i64)

define void @count_me_3(double* nocapture %A, double* nocapture %B, double* nocapture %C, i64 %n) nounwind {
entry:
  %t0 = icmp sgt i64 %n, 0
  br i1 %t0, label %loop, label %return

loop:
  %i = phi i64 [ %i.next, %loop ], [ 0, %entry ]
  call void @use(i64 %i)
  %Ai = getelementptr inbounds double* %A, i64 %i
  %Bi = getelementptr inbounds double* %B, i64 %i
  %Ci = getelementptr inbounds double* %C, i64 %i
  %t1 = load double* %Bi
  %t2 = load double* %Ci
  %m = fmul double %t1, %t2
  store double %m, double* %Ai
  %i.next = add nsw i64 %i, 1
  %exitcond = icmp eq i64 %i.next, %n
  br i1 %exitcond, label %return, label %loop

return:
  ret void
}