6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-09-30 19:55:11 +00:00
Code Issues Projects Releases Wiki Activity
bef4c3e069
llvm-6502/test/CodeGen/ARM/fast-isel-call.ll

254 lines
7.4 KiB
LLVM
Raw Normal View History

ARM target code clean up. Check for iOS, not Darwin where it makes sense. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146981 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-20 18:26:50 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-apple-ios | FileCheck %s --check-prefix=ARM
Enable FastISel on ARM for Linux and NaCl, not MCJIT This is a resubmit of r182877, which was reverted because it broken MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only enabled for iOS. I've CC'ed people from the original review and revert. FastISel was only enabled for iOS ARM and Thumb2, this patch enables it for ARM (not Thumb2) on Linux and NaCl, but not MCJIT. Thumb2 support needs a bit more work, mainly around register class restrictions. The patch punts to SelectionDAG when doing TLS relocation on non-Darwin targets. I will fix this and other FastISel-to-SelectionDAG failures in a separate patch. The patch also forces FastISel to retain frame pointers: iOS always keeps them for backtracking (so emitted code won't change because of this), but Linux was getting much worse code that was incorrect when using big frames (such as test-suite's lencod). I'll also fix this in a later patch, it will probably require a peephole so that FastISel doesn't rematerialize frame pointers back-to-back. The test changes are straightforward, similar to: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html They also add a vararg test that got dropped in that change. I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0 and all the tests pass. All the tests also pass on x86 make check-all. I also re-ran the check-all tests that failed on ARM, and they all seem to pass. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183966 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-14 02:49:43 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-linux-gnueabi | FileCheck %s --check-prefix=ARM
ARM target code clean up. Check for iOS, not Darwin where it makes sense. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146981 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-20 18:26:50 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=thumbv7-apple-ios | FileCheck %s --check-prefix=THUMB
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-apple-ios -arm-long-calls | FileCheck %s --check-prefix=ARM-LONG
Enable FastISel on ARM for Linux and NaCl, not MCJIT This is a resubmit of r182877, which was reverted because it broken MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only enabled for iOS. I've CC'ed people from the original review and revert. FastISel was only enabled for iOS ARM and Thumb2, this patch enables it for ARM (not Thumb2) on Linux and NaCl, but not MCJIT. Thumb2 support needs a bit more work, mainly around register class restrictions. The patch punts to SelectionDAG when doing TLS relocation on non-Darwin targets. I will fix this and other FastISel-to-SelectionDAG failures in a separate patch. The patch also forces FastISel to retain frame pointers: iOS always keeps them for backtracking (so emitted code won't change because of this), but Linux was getting much worse code that was incorrect when using big frames (such as test-suite's lencod). I'll also fix this in a later patch, it will probably require a peephole so that FastISel doesn't rematerialize frame pointers back-to-back. The test changes are straightforward, similar to: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html They also add a vararg test that got dropped in that change. I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0 and all the tests pass. All the tests also pass on x86 make check-all. I also re-ran the check-all tests that failed on ARM, and they all seem to pass. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183966 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-14 02:49:43 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-linux-gnueabi -arm-long-calls | FileCheck %s --check-prefix=ARM-LONG
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=thumbv7-apple-ios -arm-long-calls | FileCheck %s --check-prefix=THUMB-LONG
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-apple-ios -mattr=-vfp2 | FileCheck %s --check-prefix=ARM-NOVFP
Enable FastISel on ARM for Linux and NaCl, not MCJIT This is a resubmit of r182877, which was reverted because it broken MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only enabled for iOS. I've CC'ed people from the original review and revert. FastISel was only enabled for iOS ARM and Thumb2, this patch enables it for ARM (not Thumb2) on Linux and NaCl, but not MCJIT. Thumb2 support needs a bit more work, mainly around register class restrictions. The patch punts to SelectionDAG when doing TLS relocation on non-Darwin targets. I will fix this and other FastISel-to-SelectionDAG failures in a separate patch. The patch also forces FastISel to retain frame pointers: iOS always keeps them for backtracking (so emitted code won't change because of this), but Linux was getting much worse code that was incorrect when using big frames (such as test-suite's lencod). I'll also fix this in a later patch, it will probably require a peephole so that FastISel doesn't rematerialize frame pointers back-to-back. The test changes are straightforward, similar to: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html They also add a vararg test that got dropped in that change. I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0 and all the tests pass. All the tests also pass on x86 make check-all. I also re-ran the check-all tests that failed on ARM, and they all seem to pass. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183966 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-14 02:49:43 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=armv7-linux-gnueabi -mattr=-vfp2 | FileCheck %s --check-prefix=ARM-NOVFP
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; RUN: llc < %s -O0 -fast-isel-abort -relocation-model=dynamic-no-pic -mtriple=thumbv7-apple-ios -mattr=-vfp2 | FileCheck %s --check-prefix=THUMB-NOVFP
; Note that some of these tests assume that relocations are either
; movw/movt or constant pool loads. Different platforms will select
; different approaches.
Add support for passing i1, i8, and i16 call parameters. Also, be sure to zero-extend the constant integer encoding. Test case provides testing for both call parameters and materialization of i1, i8, and i16 types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143821 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-05 20:16:15 +00:00
define i32 @t0(i1 zeroext %a) nounwind {
%1 = zext i1 %a to i32
ret i32 %1
}
define i32 @t1(i8 signext %a) nounwind {
%1 = sext i8 %a to i32
ret i32 %1
}
define i32 @t2(i8 zeroext %a) nounwind {
%1 = zext i8 %a to i32
ret i32 %1
}
define i32 @t3(i16 signext %a) nounwind {
%1 = sext i16 %a to i32
ret i32 %1
}
define i32 @t4(i16 zeroext %a) nounwind {
%1 = zext i16 %a to i32
ret i32 %1
}
define void @foo(i8 %a, i16 %b) nounwind {
; ARM: foo
; THUMB: foo
;; Materialize i1 1
; ARM: movw r2, #1
;; zero-ext
; ARM: and r2, r2, #1
; THUMB: and r2, r2, #1
%1 = call i32 @t0(i1 zeroext 1)
; ARM: sxtb r2, r1
; ARM: mov r0, r2
; THUMB: sxtb r2, r1
; THUMB: mov r0, r2
%2 = call i32 @t1(i8 signext %a)
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; ARM: and r2, r1, #255
Add support for passing i1, i8, and i16 call parameters. Also, be sure to zero-extend the constant integer encoding. Test case provides testing for both call parameters and materialization of i1, i8, and i16 types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143821 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-05 20:16:15 +00:00
; ARM: mov r0, r2
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; THUMB: and r2, r1, #255
Add support for passing i1, i8, and i16 call parameters. Also, be sure to zero-extend the constant integer encoding. Test case provides testing for both call parameters and materialization of i1, i8, and i16 types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143821 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-05 20:16:15 +00:00
; THUMB: mov r0, r2
%3 = call i32 @t2(i8 zeroext %a)
; ARM: sxth r2, r1
; ARM: mov r0, r2
; THUMB: sxth r2, r1
; THUMB: mov r0, r2
%4 = call i32 @t3(i16 signext %b)
; ARM: uxth r2, r1
; ARM: mov r0, r2
; THUMB: uxth r2, r1
; THUMB: mov r0, r2
%5 = call i32 @t4(i16 zeroext %b)
;; A few test to check materialization
;; Note: i1 1 was materialized with t1 call
; ARM: movw r1, #255
%6 = call i32 @t2(i8 zeroext 255)
; ARM: movw r1, #65535
; THUMB: movw r1, #65535
%7 = call i32 @t4(i16 zeroext 65535)
ret void
}
Enable support for returning i1, i8, and i16. Nothing special todo as it's the callee's responsibility to sign or zero-extend the return value. The additional test case just checks to make sure the calls are selected (i.e., -fast-isel-abort doesn't assert). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144047 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-08 00:03:32 +00:00
define void @foo2() nounwind {
%1 = call signext i16 @t5()
%2 = call zeroext i16 @t6()
%3 = call signext i8 @t7()
%4 = call zeroext i8 @t8()
%5 = call zeroext i1 @t9()
ret void
}
declare signext i16 @t5();
declare zeroext i16 @t6();
declare signext i8 @t7();
declare zeroext i8 @t8();
declare zeroext i1 @t9();
[arm-fast-isel] After promoting a function parameter be sure to update the argument value type. Otherwise, the sign/zero-extend has no effect on arguments passed via the stack (i.e., undefined high-order bits). rdar://10515467 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145701 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-02 20:25:18 +00:00
DebugInfo: Don't lose unreferenced non-trivial by-value parameters A FastISel optimization was causing us to emit no information for such parameters & when they go missing we end up emitting a different function type. By avoiding that shortcut we not only get types correct (very important) but also location information (handy) - even if it's only live at the start of a function & may be clobbered later. Reviewed/discussion by Evan Cheng & Dan Gohman. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184604 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-21 22:56:30 +00:00
define i32 @t10() {
[arm-fast-isel] After promoting a function parameter be sure to update the argument value type. Otherwise, the sign/zero-extend has no effect on arguments passed via the stack (i.e., undefined high-order bits). rdar://10515467 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145701 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-02 20:25:18 +00:00
entry:
; ARM: @t10
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM: movw [[R0:l?r[0-9]*]], #0
; ARM: movw [[R1:l?r[0-9]*]], #248
; ARM: movw [[R2:l?r[0-9]*]], #187
; ARM: movw [[R3:l?r[0-9]*]], #28
; ARM: movw [[R4:l?r[0-9]*]], #40
; ARM: movw [[R5:l?r[0-9]*]], #186
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; ARM: and [[R0]], [[R0]], #255
; ARM: and [[R1]], [[R1]], #255
; ARM: and [[R2]], [[R2]], #255
; ARM: and [[R3]], [[R3]], #255
; ARM: and [[R4]], [[R4]], #255
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM: str [[R4]], [sp]
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; ARM: and [[R4]], [[R5]], #255
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM: str [[R4]], [sp, #4]
; ARM: bl {{_?}}bar
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; ARM-LONG: @t10
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM-LONG: {{(movw)|(ldr)}} [[R:l?r[0-9]*]], {{(:lower16:L_bar\$non_lazy_ptr)|(.LCPI)}}
; ARM-LONG: {{(movt [[R]], :upper16:L_bar\$non_lazy_ptr)?}}
; ARM-LONG: ldr [[R]], {{\[}}[[R]]{{\]}}
; ARM-LONG: blx [[R]]
[arm-fast-isel] After promoting a function parameter be sure to update the argument value type. Otherwise, the sign/zero-extend has no effect on arguments passed via the stack (i.e., undefined high-order bits). rdar://10515467 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145701 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-02 20:25:18 +00:00
; THUMB: @t10
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB: movs [[R0:l?r[0-9]*]], #0
; THUMB: movt [[R0]], #0
; THUMB: movs [[R1:l?r[0-9]*]], #248
; THUMB: movt [[R1]], #0
; THUMB: movs [[R2:l?r[0-9]*]], #187
; THUMB: movt [[R2]], #0
; THUMB: movs [[R3:l?r[0-9]*]], #28
; THUMB: movt [[R3]], #0
; THUMB: movw [[R4:l?r[0-9]*]], #40
; THUMB: movt [[R4]], #0
; THUMB: movw [[R5:l?r[0-9]*]], #186
; THUMB: movt [[R5]], #0
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; THUMB: and [[R0]], [[R0]], #255
; THUMB: and [[R1]], [[R1]], #255
; THUMB: and [[R2]], [[R2]], #255
; THUMB: and [[R3]], [[R3]], #255
; THUMB: and [[R4]], [[R4]], #255
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB: str.w [[R4]], [sp]
ARM FastISel integer sext/zext improvements My recent ARM FastISel patch exposed this bug: http://llvm.org/bugs/show_bug.cgi?id=16178 The root cause is that it can't select integer sext/zext pre-ARMv6 and asserts out. The current integer sext/zext code doesn't handle other cases gracefully either, so this patch makes it handle all sext and zext from i1/i8/i16 to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This should fix the bug as well as make FastISel faster because it bails to SelectionDAG less often. See fastisel-ext.patch for this. fastisel-ext-tests.patch changes current tests to always use reg-imm AND for 8-bit zext instead of UXTB. This simplifies code since it is supported on ARMv4t and later, and at least on A15 both should perform exactly the same (both have exec 1 uop 1, type I). 2013-05-31-char-shift-crash.ll is a bitcode version of the above bug 16178 repro. fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel should now handle. Note that my ARM FastISel enabling patch was reverted due to a separate failure when dealing with MCJIT, I'll fix this second failure and then turn FastISel on again for non-iOS ARM targets. I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15 hardware. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-07 20:10:37 +00:00
; THUMB: and [[R4]], [[R5]], #255
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB: str.w [[R4]], [sp, #4]
; THUMB: bl {{_?}}bar
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; THUMB-LONG: @t10
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB-LONG: {{(movw)|(ldr.n)}} [[R:l?r[0-9]*]], {{(:lower16:L_bar\$non_lazy_ptr)|(.LCPI)}}
; THUMB-LONG: {{(movt [[R]], :upper16:L_bar\$non_lazy_ptr)?}}
; THUMB-LONG: ldr{{(.w)?}} [[R]], {{\[}}[[R]]{{\]}}
; THUMB-LONG: blx [[R]]
[arm-fast-isel] After promoting a function parameter be sure to update the argument value type. Otherwise, the sign/zero-extend has no effect on arguments passed via the stack (i.e., undefined high-order bits). rdar://10515467 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145701 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-02 20:25:18 +00:00
%call = call i32 @bar(i8 zeroext 0, i8 zeroext -8, i8 zeroext -69, i8 zeroext 28, i8 zeroext 40, i8 zeroext -70)
ret i32 0
}
declare i32 @bar(i8 zeroext, i8 zeroext, i8 zeroext, i8 zeroext, i8 zeroext, i8 zeroext)
[arm-fast-isel] Add support for non-global callee. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157336 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-23 18:38:57 +00:00
define i32 @bar0(i32 %i) nounwind {
ret i32 0
}
define void @foo3() uwtable {
; ARM: movw r0, #0
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM: {{(movw r1, :lower16:_?bar0)|(ldr r1, .LCPI)}}
; ARM: {{(movt r1, :upper16:_?bar0)|(ldr r1, \[r1\])}}
[arm-fast-isel] Add support for non-global callee. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157336 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-23 18:38:57 +00:00
; ARM: blx r1
; THUMB: movs r0, #0
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB: {{(movw r1, :lower16:_?bar0)|(ldr.n r1, .LCPI)}}
; THUMB: {{(movt r1, :upper16:_?bar0)|(ldr r1, \[r1\])}}
[arm-fast-isel] Add support for non-global callee. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157336 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-23 18:38:57 +00:00
; THUMB: blx r1
%fptr = alloca i32 (i32)*, align 8
store i32 (i32)* @bar0, i32 (i32)** %fptr, align 8
%1 = load i32 (i32)** %fptr, align 8
%call = call i32 %1(i32 0)
ret void
}
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
define i32 @LibCall(i32 %a, i32 %b) {
entry:
; ARM: LibCall
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM: bl {{___udivsi3|__aeabi_uidiv}}
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; ARM-LONG: LibCall
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; ARM-LONG: {{(movw r2, :lower16:L___udivsi3\$non_lazy_ptr)|(ldr r2, .LCPI)}}
; ARM-LONG: {{(movt r2, :upper16:L___udivsi3\$non_lazy_ptr)?}}
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; ARM-LONG: ldr r2, [r2]
; ARM-LONG: blx r2
; THUMB: LibCall
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB: bl {{___udivsi3|__aeabi_uidiv}}
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; THUMB-LONG: LibCall
Fix ARM FastISel tests, as a first step to enabling ARM FastISel ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on enabling it for other targets. As a first step I've fixed some of the tests. Changes to ARM FastISel tests: - Different triples don't generate the same relocations (especially movw/movt versus constant pool loads). Use a regex to allow either. - Mangling is different. Use a regex to allow either. - The reserved registers are sometimes different, so registers get allocated in a different order. Capture the names only where this occurs. - Add -verify-machineinstrs to some tests where it works. It doesn't work everywhere it should yet. - Add -fast-isel-abort to many tests that didn't have it before. - Split out the VarArg test from fast-isel-call.ll into its own test. This simplifies test setup because of --check-prefix. Patch by JF Bastien git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:26:38 +00:00
; THUMB-LONG: {{(movw r2, :lower16:L___udivsi3\$non_lazy_ptr)|(ldr.n r2, .LCPI)}}
; THUMB-LONG: {{(movt r2, :upper16:L___udivsi3\$non_lazy_ptr)?}}
[arm-fast-isel] Add support for -arm-long-calls. Patch by Jush Lu <jush.msn@gmail.com>. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158368 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-12 19:25:13 +00:00
; THUMB-LONG: ldr r2, [r2]
; THUMB-LONG: blx r2
%tmp1 = udiv i32 %a, %b ; <i32> [#uses=1]
ret i32 %tmp1
}
[arm-fast-isel] Add support for vararg function calls. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160500 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-19 09:49:00 +00:00
[arm-fast-isel] Add support for fastcc. Without fastcc support, the caller just falls through to CallingConv::C for fastcc, but callee still uses fastcc, this inconsistency of calling convention is a problem, and fastcc support can fix it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162013 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-16 05:15:53 +00:00
; Test fastcc
define fastcc void @fast_callee(float %i) ssp {
entry:
; ARM: fast_callee
; ARM: vmov r0, s0
; THUMB: fast_callee
; THUMB: vmov r0, s0
; ARM-NOVFP: fast_callee
; ARM-NOVFP-NOT: s0
; THUMB-NOVFP: fast_callee
; THUMB-NOVFP-NOT: s0
call void @print(float %i)
ret void
}
define void @fast_caller() ssp {
entry:
; ARM: fast_caller
; ARM: vldr s0,
; THUMB: fast_caller
; THUMB: vldr s0,
; ARM-NOVFP: fast_caller
; ARM-NOVFP: movw r0, #13107
; ARM-NOVFP: movt r0, #16611
; THUMB-NOVFP: fast_caller
; THUMB-NOVFP: movw r0, #13107
; THUMB-NOVFP: movt r0, #16611
call fastcc void @fast_callee(float 0x401C666660000000)
ret void
}
define void @no_fast_callee(float %i) ssp {
entry:
; ARM: no_fast_callee
; ARM: vmov s0, r0
; THUMB: no_fast_callee
; THUMB: vmov s0, r0
; ARM-NOVFP: no_fast_callee
; ARM-NOVFP-NOT: s0
; THUMB-NOVFP: no_fast_callee
; THUMB-NOVFP-NOT: s0
call void @print(float %i)
ret void
}
define void @no_fast_caller() ssp {
entry:
; ARM: no_fast_caller
; ARM: vmov r0, s0
; THUMB: no_fast_caller
; THUMB: vmov r0, s0
; ARM-NOVFP: no_fast_caller
; ARM-NOVFP: movw r0, #13107
; ARM-NOVFP: movt r0, #16611
; THUMB-NOVFP: no_fast_caller
; THUMB-NOVFP: movw r0, #13107
; THUMB-NOVFP: movt r0, #16611
call void @no_fast_callee(float 0x401C666660000000)
ret void
}
declare void @print(float)
Reference in New Issue Copy Permalink