6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-16 11:30:51 +00:00
Code Issues Projects Releases Wiki Activity
da5e5688e9
llvm-6502/test/CodeGen/ARM/struct-byval-frame-index.ll

220 lines
12 KiB
LLVM
Raw Normal View History

ARM & AArch64: make use of common cmpxchg idioms after expansion The C and C++ semantics for compare_exchange require it to return a bool indicating success. This gets mapped to LLVM IR which follows each cmpxchg with an icmp of the value loaded against the desired value. When lowered to ldxr/stxr loops, this extra comparison is redundant: its results are implicit in the control-flow of the function. This commit makes two changes: it replaces that icmp with appropriate PHI nodes, and then makes sure earlyCSE is called after expansion to actually make use of the opportunities revealed. I've also added -{arm,aarch64}-enable-atomic-tidy options, so that existing fragile tests aren't perturbed too much by the change. Many of them either rely on undef/unreachable too pervasively to be restored to something well-defined (particularly while making sure they test the same obscure assert from many years ago), or depend on a particular CFG shape, which is disrupted by SimplifyCFG. rdar://problem/16227836 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209883 91177308-0d34-0410-b5e6-96231b3b80d8
2014-05-30 10:09:59 +00:00
; RUN: llc < %s -mcpu=cortex-a15 -verify-machineinstrs -arm-atomic-cfg-tidy=0 | FileCheck %s
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
; Check a spill right after a function call with large struct byval is correctly
; generated.
; PR16393
; CHECK: set_stored_macroblock_parameters
; CHECK: str r{{.*}}, [sp, [[SLOT:#[0-9]+]]] @ 4-byte Spill
; CHECK: bl RestoreMVBlock8x8
; CHECK: bl RestoreMVBlock8x8
; CHECK: bl RestoreMVBlock8x8
; CHECK: ldr r{{.*}}, [sp, [[SLOT]]] @ 4-byte Reload
target triple = "armv7l-unknown-linux-gnueabihf"
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
%structA = type { double, [16 x [16 x i16]], [16 x [16 x i16]], [16 x [16 x i16]], i32****, i32***, i32, i16, [4 x i32], [4 x i32], i8**, [16 x i8], [16 x i8], i32, i64, i32, i16******, i16******, [2 x [4 x [4 x i8]]], i32, i32, i32, i32, i32, i32, i32, i32, i32 }
%structB = type { i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, float, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i8**, i8**, i32, i32***, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, [9 x [16 x [16 x i16]]], [5 x [16 x [16 x i16]]], [9 x [8 x [8 x i16]]], [2 x [4 x [16 x [16 x i16]]]], [16 x [16 x i16]], [16 x [16 x i32]], i32****, i32***, i32***, i32***, i32****, i32****, %structC*, %structD*, %structK*, i32*, i32*, i32, i32, i32, i32, [4 x [4 x i32]], i32, i32, i32, i32, i32, double, i32, i32, i32, i32, i16******, i16******, i16******, i16******, [15 x i16], i32, i32, i32, i32, i32, i32, i32, i32, [6 x [32 x i32]], i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, [1 x i32], i32, i32, [2 x i32], i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, %structL*, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, double**, double***, i32***, double**, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, [3 x [2 x i32]], [2 x i32], i32, i32, i16, i32, i32, i32, i32, i32 }
%structC = type { i32, i32, [100 x %structD*], i32, float, float, float }
%structD = type { i32, i32, i32, i32, i32, i32, %structE*, %structH*, %structJ*, i32, i32*, i32*, i32*, i32, i32*, i32*, i32*, i32 (i32)*, [3 x [2 x i32]] }
%structE = type { %structF*, %structG, %structG }
%structF = type { i32, i32, i8, i32, i32, i8, i8, i32, i32, i8*, i32 }
%structG = type { i32, i32, i32, i32, i32, i8*, i32*, i32, i32 }
%structH = type { [3 x [11 x %structI]], [2 x [9 x %structI]], [2 x [10 x %structI]], [2 x [6 x %structI]], [4 x %structI], [4 x %structI], [3 x %structI] }
%structI = type { i16, i8, i32 }
%structJ = type { [2 x %structI], [4 x %structI], [3 x [4 x %structI]], [10 x [4 x %structI]], [10 x [15 x %structI]], [10 x [15 x %structI]], [10 x [5 x %structI]], [10 x [5 x %structI]], [10 x [15 x %structI]], [10 x [15 x %structI]] }
%structK = type { i32, i32, i32, [2 x i32], i32, [8 x i32], %structK*, %structK*, i32, [2 x [4 x [4 x [2 x i32]]]], [16 x i8], [16 x i8], i32, i64, [4 x i32], [4 x i32], i64, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i16, double, i32, i32, i32, i32, i32, i32, i32, i32, i32 }
%structL = type { i32, i32, i32, i32, i32, %structL* }
%structM = type { i32, i32, i32, i32, i32, i32, [6 x [33 x i64]], [6 x [33 x i64]], [6 x [33 x i64]], [6 x [33 x i64]], i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i32, i16**, i16****, i16****, i16*****, i16***, i8*, i8***, i64***, i64***, i16****, i8**, i8**, %structM*, %structM*, %structM*, i32, i32, i32, i32, i32, i32, i32 }
%structN = type { i32, [16 x [16 x i32]], [16 x [16 x i32]], [16 x [16 x i32]], [3 x [16 x [16 x i32]]], [4 x i16], [4 x i8], [4 x i8], [4 x i8], [16 x [16 x i16]], [16 x [16 x i16]], [16 x [16 x i32]] }
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
@cofAC = external global i32****, align 4
@cofDC = external global i32***, align 4
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
@rdopt = external global %structA*, align 4
@img = external global %structB*
@enc_picture = external global %structM*
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
@si_frame_indicator = external global i32, align 4
@sp2_frame_indicator = external global i32, align 4
@lrec = external global i32**, align 4
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
@tr8x8 = external global %structN, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
@best_mode = external global i16, align 2
@best_c_imode = external global i32, align 4
@best_i16offset = external global i32, align 4
@bi_pred_me = external global i16, align 2
@b8mode = external global [4 x i32], align 4
@b8pdir = external global [4 x i32], align 4
@b4_intra_pred_modes = external global [16 x i8], align 1
@b8_intra_pred_modes8x8 = external global [16 x i8], align 1
@b4_ipredmode = external global [16 x i8], align 1
@b8_ipredmode8x8 = external global [4 x [4 x i8]], align 1
@rec_mbY = external global [16 x [16 x i16]], align 2
@lrec_rec = external global [16 x [16 x i32]], align 4
@rec_mbU = external global [16 x [16 x i16]], align 2
@rec_mbV = external global [16 x [16 x i16]], align 2
@lrec_rec_U = external global [16 x [16 x i32]], align 4
@lrec_uv = external global i32***, align 4
@lrec_rec_V = external global [16 x [16 x i32]], align 4
@cbp = external global i32, align 4
@cbp_blk = external global i64, align 8
@luma_transform_size_8x8_flag = external global i32, align 4
@frefframe = external global [4 x [4 x i8]], align 1
@brefframe = external global [4 x [4 x i8]], align 1
; Function Attrs: nounwind
declare void @llvm.memcpy.p0i8.p0i8.i32(i8* nocapture, i8* nocapture, i32, i32, i1) #0
; Function Attrs: nounwind
declare void @llvm.memset.p0i8.i32(i8* nocapture, i8, i32, i32, i1) #0
; Function Attrs: nounwind
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
declare void @SetMotionVectorsMB(%structK* nocapture, i32) #1
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
; Function Attrs: nounwind
define void @set_stored_macroblock_parameters() #1 {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%0 = load %structB*, %structB** @img, align 4
%1 = load i32, i32* undef, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%mb_data = getelementptr inbounds %structB, %structB* %0, i32 0, i32 61
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%2 = load %structK*, %structK** %mb_data, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br label %for.body
for.body: ; preds = %for.body, %entry
br i1 undef, label %for.end, label %for.body
for.end: ; preds = %for.body
br i1 undef, label %for.body20, label %if.end
for.body20: ; preds = %for.end
unreachable
if.end: ; preds = %for.end
br i1 undef, label %if.end40, label %for.cond31.preheader
for.cond31.preheader: ; preds = %if.end
unreachable
if.end40: ; preds = %if.end
br i1 undef, label %if.end43, label %if.then42
if.then42: ; preds = %if.end40
br label %if.end43
if.end43: ; preds = %if.then42, %if.end40
br i1 undef, label %if.end164, label %for.cond47.preheader
for.cond47.preheader: ; preds = %if.end43
br i1 undef, label %for.body119, label %if.end164
for.body119: ; preds = %for.body119, %for.cond47.preheader
br i1 undef, label %for.body119, label %if.end164
if.end164: ; preds = %for.body119, %for.cond47.preheader, %if.end43
TBAA: remove !tbaa from testing cases when they are not needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191689 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-30 18:17:35 +00:00
store i32*** null, i32**** @cofDC, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%mb_type = getelementptr inbounds %structK, %structK* %2, i32 %1, i32 8
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br i1 undef, label %if.end230, label %if.then169
if.then169: ; preds = %if.end164
br i1 undef, label %for.cond185.preheader, label %for.cond210.preheader
for.cond185.preheader: ; preds = %if.then169
unreachable
for.cond210.preheader: ; preds = %if.then169
unreachable
if.end230: ; preds = %if.end164
tail call void @llvm.memcpy.p0i8.p0i8.i32(i8* undef, i8* bitcast ([4 x i32]* @b8mode to i8*), i32 16, i32 4, i1 false)
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%b8pdir = getelementptr inbounds %structK, %structK* %2, i32 %1, i32 15
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%3 = bitcast [4 x i32]* %b8pdir to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i32(i8* %3, i8* bitcast ([4 x i32]* @b8pdir to i8*), i32 16, i32 4, i1 false)
br i1 undef, label %if.end236, label %if.then233
if.then233: ; preds = %if.end230
unreachable
if.end236: ; preds = %if.end230
%cmp242 = icmp ne i16 undef, 8
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%4 = load i32, i32* @luma_transform_size_8x8_flag, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%tobool245 = icmp ne i32 %4, 0
%or.cond812 = or i1 %cmp242, %tobool245
br i1 %or.cond812, label %if.end249, label %land.lhs.true246
land.lhs.true246: ; preds = %if.end236
br i1 undef, label %if.end249, label %if.then248
if.then248: ; preds = %land.lhs.true246
Allocate local registers in order for optimal coloring. Also avoid locals evicting locals just because they want a cheaper register. Problem: MI Sched knows exactly how many registers we have and assumes they can be colored. In cases where we have large blocks, usually from unrolled loops, greedy coloring fails. This is a source of "regressions" from the MI Scheduler on x86. I noticed this issue on x86 where we have long chains of two-address defs in the same live range. It's easy to see this in matrix multiplication benchmarks like IRSmk and even the unit test misched-matmul.ll. A fundamental difference between the LLVM register allocator and conventional graph coloring is that in our model a live range can't discover its neighbors, it can only verify its neighbors. That's why we initially went for greedy coloring and added eviction to deal with the hard cases. However, for singly defined and two-address live ranges, we can optimally color without visiting neighbors simply by processing the live ranges in instruction order. Other beneficial side effects: It is much easier to understand and debug regalloc for large blocks when the live ranges are allocated in order. Yes, global allocation is still very confusing, but it's nice to be able to comprehend what happened locally. Heuristics could be added to bias register assignment based on instruction locality (think late register pairing, banks...). Intuituvely this will make some test cases that are on the threshold of register pressure more stable. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187139 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-25 18:35:14 +00:00
tail call void asm sideeffect "", "~{r1},~{r2},~{r3},~{r4},~{r5},~{r6},~{r7},~{r8},~{r9},~{r10},~{r11}"() nounwind
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
tail call void @RestoreMVBlock8x8(i32 1, i32 0, %structN* byval @tr8x8, i32 0) #0
tail call void @RestoreMVBlock8x8(i32 1, i32 2, %structN* byval @tr8x8, i32 0) #0
tail call void @RestoreMVBlock8x8(i32 1, i32 3, %structN* byval @tr8x8, i32 0) #0
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br label %if.end249
if.end249: ; preds = %if.then248, %land.lhs.true246, %if.end236
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%5 = load i32, i32* @luma_transform_size_8x8_flag, align 4
%6 = load %structA*, %structA** @rdopt, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%luma_transform_size_8x8_flag264 = getelementptr inbounds %structA, %structA* %6, i32 0, i32 21
TBAA: remove !tbaa from testing cases when they are not needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191689 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-30 18:17:35 +00:00
store i32 %5, i32* %luma_transform_size_8x8_flag264, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%7 = load i32, i32* undef, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%add281 = add nsw i32 %7, 0
br label %for.body285
for.body285: ; preds = %for.inc503, %if.end249
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
%8 = phi %structB* [ undef, %if.end249 ], [ %.pre1155, %for.inc503 ]
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%i.21103 = phi i32 [ 0, %if.end249 ], [ %inc504, %for.inc503 ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%block_x286 = getelementptr inbounds %structB, %structB* %8, i32 0, i32 37
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%9 = load i32, i32* %block_x286, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%add287 = add nsw i32 %9, %i.21103
%shr289 = ashr i32 %i.21103, 1
%add290 = add nsw i32 %shr289, 0
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%arrayidx292 = getelementptr inbounds %structK, %structK* %2, i32 %1, i32 15, i32 %add290
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%10 = load %structM*, %structM** @enc_picture, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%ref_idx = getelementptr inbounds %structM, %structM* %10, i32 0, i32 35
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%11 = load i8***, i8**** %ref_idx, align 4
%12 = load i8**, i8*** %11, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%arrayidx313 = getelementptr inbounds i8*, i8** %12, i32 %add281
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%13 = load i8*, i8** %arrayidx313, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%arrayidx314 = getelementptr inbounds i8, i8* %13, i32 %add287
TBAA: remove !tbaa from testing cases when they are not needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191689 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-30 18:17:35 +00:00
store i8 -1, i8* %arrayidx314, align 1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%14 = load %structB*, %structB** @img, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%MbaffFrameFlag327 = getelementptr inbounds %structB, %structB* %14, i32 0, i32 100
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%15 = load i32, i32* %MbaffFrameFlag327, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%tobool328 = icmp eq i32 %15, 0
br i1 %tobool328, label %if.end454, label %if.then329
if.then329: ; preds = %for.body285
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%16 = load %structA*, %structA** @rdopt, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br label %if.end454
if.end454: ; preds = %if.then329, %for.body285
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%17 = load i32, i32* %arrayidx292, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
%cmp457 = icmp eq i32 %17, 0
br i1 %cmp457, label %if.then475, label %lor.lhs.false459
lor.lhs.false459: ; preds = %if.end454
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%18 = load i32, i32* %mb_type, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
switch i32 %18, label %for.inc503 [
i32 9, label %if.then475
i32 10, label %if.then475
i32 13, label %if.then475
i32 14, label %if.then475
]
if.then475: ; preds = %lor.lhs.false459, %lor.lhs.false459, %lor.lhs.false459, %lor.lhs.false459, %if.end454
TBAA: remove !tbaa from testing cases when they are not needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191689 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-30 18:17:35 +00:00
store i16 0, i16* undef, align 2
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br label %for.inc503
for.inc503: ; preds = %if.then475, %lor.lhs.false459
%inc504 = add nsw i32 %i.21103, 1
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%.pre1155 = load %structB*, %structB** @img, align 4
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
br label %for.body285
}
; Function Attrs: nounwind
declare void @update_offset_params(i32, i32) #1
; Function Attrs: nounwind
Cleanup testing case by using a shorter name for types. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186436 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 18:26:48 +00:00
declare void @RestoreMVBlock8x8(i32, i32, %structN* byval nocapture, i32) #1
PEI: Support for non-zero SPAdj at beginning of a basic block. We can have a FrameSetup in one basic block and the matching FrameDestroy in a different basic block when we have struct byval. In that case, SPAdj is not zero at beginning of the basic block. Modify PEI to correctly set SPAdj at beginning of each basic block using DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block. PEI had an assert SPAdjCount || SPAdj == 0. If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure. We can add an extra condition to make sure the pairs are matched: The pairs start with a FrameSetup. But since we are doing a much better job in the verifier, this patch removes the check in PEI. PR16393 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
attributes #0 = { nounwind }
Fix some tests. The 'false' version just omits the attribute altogether. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189065 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-22 21:20:14 +00:00
attributes #1 = { nounwind "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "unsafe-fp-math"="false" "use-soft-float"="false" }
Reference in New Issue Copy Permalink