2013-06-13 20:23:34 +00:00
|
|
|
; RUN: llc -mcpu=pwr7 -O0 -disable-fp-elim -fast-isel=false < %s | FileCheck %s
|
This patch addresses PR13949.
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166022 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-16 13:30:53 +00:00
|
|
|
|
|
|
|
|
target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v128:128:128-n32:64"
|
|
|
|
|
target triple = "powerpc64-unknown-linux-gnu"
|
|
|
|
|
|
|
|
|
|
%struct.s1 = type { i8 }
|
|
|
|
|
%struct.s2 = type { i16 }
|
|
|
|
|
%struct.s4 = type { i32 }
|
|
|
|
|
%struct.t1 = type { i8 }
|
|
|
|
|
%struct.t3 = type <{ i16, i8 }>
|
|
|
|
|
%struct.t5 = type <{ i32, i8 }>
|
|
|
|
|
%struct.t6 = type <{ i32, i16 }>
|
|
|
|
|
%struct.t7 = type <{ i32, i16, i8 }>
|
|
|
|
|
%struct.s3 = type { i16, i8 }
|
|
|
|
|
%struct.s5 = type { i32, i8 }
|
|
|
|
|
%struct.s6 = type { i32, i16 }
|
|
|
|
|
%struct.s7 = type { i32, i16, i8 }
|
|
|
|
|
%struct.t2 = type <{ i16 }>
|
|
|
|
|
%struct.t4 = type <{ i32 }>
|
|
|
|
|
|
|
|
|
|
@caller1.p1 = private unnamed_addr constant %struct.s1 { i8 1 }, align 1
|
|
|
|
|
@caller1.p2 = private unnamed_addr constant %struct.s2 { i16 2 }, align 2
|
|
|
|
|
@caller1.p3 = private unnamed_addr constant { i16, i8, i8 } { i16 4, i8 8, i8 undef }, align 2
|
|
|
|
|
@caller1.p4 = private unnamed_addr constant %struct.s4 { i32 16 }, align 4
|
|
|
|
|
@caller1.p5 = private unnamed_addr constant { i32, i8, [3 x i8] } { i32 32, i8 64, [3 x i8] undef }, align 4
|
|
|
|
|
@caller1.p6 = private unnamed_addr constant { i32, i16, [2 x i8] } { i32 128, i16 256, [2 x i8] undef }, align 4
|
|
|
|
|
@caller1.p7 = private unnamed_addr constant { i32, i16, i8, i8 } { i32 512, i16 1024, i8 -3, i8 undef }, align 4
|
|
|
|
|
@caller2.p1 = private unnamed_addr constant %struct.t1 { i8 1 }, align 1
|
|
|
|
|
@caller2.p2 = private unnamed_addr constant { i16 } { i16 2 }, align 1
|
|
|
|
|
@caller2.p3 = private unnamed_addr constant %struct.t3 <{ i16 4, i8 8 }>, align 1
|
|
|
|
|
@caller2.p4 = private unnamed_addr constant { i32 } { i32 16 }, align 1
|
|
|
|
|
@caller2.p5 = private unnamed_addr constant %struct.t5 <{ i32 32, i8 64 }>, align 1
|
|
|
|
|
@caller2.p6 = private unnamed_addr constant %struct.t6 <{ i32 128, i16 256 }>, align 1
|
|
|
|
|
@caller2.p7 = private unnamed_addr constant %struct.t7 <{ i32 512, i16 1024, i8 -3 }>, align 1
|
|
|
|
|
|
|
|
|
|
define i32 @caller1() nounwind {
|
|
|
|
|
entry:
|
|
|
|
|
%p1 = alloca %struct.s1, align 1
|
|
|
|
|
%p2 = alloca %struct.s2, align 2
|
|
|
|
|
%p3 = alloca %struct.s3, align 2
|
|
|
|
|
%p4 = alloca %struct.s4, align 4
|
|
|
|
|
%p5 = alloca %struct.s5, align 4
|
|
|
|
|
%p6 = alloca %struct.s6, align 4
|
|
|
|
|
%p7 = alloca %struct.s7, align 4
|
|
|
|
|
%0 = bitcast %struct.s1* %p1 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %0, i8* getelementptr inbounds (%struct.s1* @caller1.p1, i32 0, i32 0), i64 1, i32 1, i1 false)
|
|
|
|
|
%1 = bitcast %struct.s2* %p2 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %1, i8* bitcast (%struct.s2* @caller1.p2 to i8*), i64 2, i32 2, i1 false)
|
|
|
|
|
%2 = bitcast %struct.s3* %p3 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %2, i8* bitcast ({ i16, i8, i8 }* @caller1.p3 to i8*), i64 4, i32 2, i1 false)
|
|
|
|
|
%3 = bitcast %struct.s4* %p4 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* bitcast (%struct.s4* @caller1.p4 to i8*), i64 4, i32 4, i1 false)
|
|
|
|
|
%4 = bitcast %struct.s5* %p5 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %4, i8* bitcast ({ i32, i8, [3 x i8] }* @caller1.p5 to i8*), i64 8, i32 4, i1 false)
|
|
|
|
|
%5 = bitcast %struct.s6* %p6 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %5, i8* bitcast ({ i32, i16, [2 x i8] }* @caller1.p6 to i8*), i64 8, i32 4, i1 false)
|
|
|
|
|
%6 = bitcast %struct.s7* %p7 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %6, i8* bitcast ({ i32, i16, i8, i8 }* @caller1.p7 to i8*), i64 8, i32 4, i1 false)
|
|
|
|
|
%call = call i32 @callee1(i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, %struct.s1* byval %p1, %struct.s2* byval %p2, %struct.s3* byval %p3, %struct.s4* byval %p4, %struct.s5* byval %p5, %struct.s6* byval %p6, %struct.s7* byval %p7)
|
|
|
|
|
ret i32 %call
|
|
|
|
|
|
|
|
|
|
; CHECK: stb {{[0-9]+}}, 119(1)
|
|
|
|
|
; CHECK: sth {{[0-9]+}}, 126(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 132(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 140(1)
|
|
|
|
|
; CHECK: std {{[0-9]+}}, 144(1)
|
|
|
|
|
; CHECK: std {{[0-9]+}}, 152(1)
|
|
|
|
|
; CHECK: std {{[0-9]+}}, 160(1)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture, i8* nocapture, i64, i32, i1) nounwind
|
|
|
|
|
|
|
|
|
|
define internal i32 @callee1(i32 %z1, i32 %z2, i32 %z3, i32 %z4, i32 %z5, i32 %z6, i32 %z7, i32 %z8, %struct.s1* byval %v1, %struct.s2* byval %v2, %struct.s3* byval %v3, %struct.s4* byval %v4, %struct.s5* byval %v5, %struct.s6* byval %v6, %struct.s7* byval %v7) nounwind {
|
|
|
|
|
entry:
|
|
|
|
|
%z1.addr = alloca i32, align 4
|
|
|
|
|
%z2.addr = alloca i32, align 4
|
|
|
|
|
%z3.addr = alloca i32, align 4
|
|
|
|
|
%z4.addr = alloca i32, align 4
|
|
|
|
|
%z5.addr = alloca i32, align 4
|
|
|
|
|
%z6.addr = alloca i32, align 4
|
|
|
|
|
%z7.addr = alloca i32, align 4
|
|
|
|
|
%z8.addr = alloca i32, align 4
|
|
|
|
|
store i32 %z1, i32* %z1.addr, align 4
|
|
|
|
|
store i32 %z2, i32* %z2.addr, align 4
|
|
|
|
|
store i32 %z3, i32* %z3.addr, align 4
|
|
|
|
|
store i32 %z4, i32* %z4.addr, align 4
|
|
|
|
|
store i32 %z5, i32* %z5.addr, align 4
|
|
|
|
|
store i32 %z6, i32* %z6.addr, align 4
|
|
|
|
|
store i32 %z7, i32* %z7.addr, align 4
|
|
|
|
|
store i32 %z8, i32* %z8.addr, align 4
|
|
|
|
|
%a = getelementptr inbounds %struct.s1* %v1, i32 0, i32 0
|
|
|
|
|
%0 = load i8* %a, align 1
|
|
|
|
|
%conv = zext i8 %0 to i32
|
|
|
|
|
%a1 = getelementptr inbounds %struct.s2* %v2, i32 0, i32 0
|
|
|
|
|
%1 = load i16* %a1, align 2
|
|
|
|
|
%conv2 = sext i16 %1 to i32
|
|
|
|
|
%add = add nsw i32 %conv, %conv2
|
|
|
|
|
%a3 = getelementptr inbounds %struct.s3* %v3, i32 0, i32 0
|
|
|
|
|
%2 = load i16* %a3, align 2
|
|
|
|
|
%conv4 = sext i16 %2 to i32
|
|
|
|
|
%add5 = add nsw i32 %add, %conv4
|
|
|
|
|
%a6 = getelementptr inbounds %struct.s4* %v4, i32 0, i32 0
|
|
|
|
|
%3 = load i32* %a6, align 4
|
|
|
|
|
%add7 = add nsw i32 %add5, %3
|
|
|
|
|
%a8 = getelementptr inbounds %struct.s5* %v5, i32 0, i32 0
|
|
|
|
|
%4 = load i32* %a8, align 4
|
|
|
|
|
%add9 = add nsw i32 %add7, %4
|
|
|
|
|
%a10 = getelementptr inbounds %struct.s6* %v6, i32 0, i32 0
|
|
|
|
|
%5 = load i32* %a10, align 4
|
|
|
|
|
%add11 = add nsw i32 %add9, %5
|
|
|
|
|
%a12 = getelementptr inbounds %struct.s7* %v7, i32 0, i32 0
|
|
|
|
|
%6 = load i32* %a12, align 4
|
|
|
|
|
%add13 = add nsw i32 %add11, %6
|
|
|
|
|
ret i32 %add13
|
|
|
|
|
|
|
|
|
|
; CHECK: lha {{[0-9]+}}, 126(1)
|
|
|
|
|
; CHECK: lha {{[0-9]+}}, 132(1)
|
2013-03-27 02:40:14 +00:00
|
|
|
; CHECK: lbz {{[0-9]+}}, 119(1)
|
This patch addresses PR13949.
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166022 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-16 13:30:53 +00:00
|
|
|
; CHECK: lwz {{[0-9]+}}, 140(1)
|
|
|
|
|
; CHECK: lwz {{[0-9]+}}, 144(1)
|
|
|
|
|
; CHECK: lwz {{[0-9]+}}, 152(1)
|
|
|
|
|
; CHECK: lwz {{[0-9]+}}, 160(1)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
define i32 @caller2() nounwind {
|
|
|
|
|
entry:
|
|
|
|
|
%p1 = alloca %struct.t1, align 1
|
|
|
|
|
%p2 = alloca %struct.t2, align 1
|
|
|
|
|
%p3 = alloca %struct.t3, align 1
|
|
|
|
|
%p4 = alloca %struct.t4, align 1
|
|
|
|
|
%p5 = alloca %struct.t5, align 1
|
|
|
|
|
%p6 = alloca %struct.t6, align 1
|
|
|
|
|
%p7 = alloca %struct.t7, align 1
|
|
|
|
|
%0 = bitcast %struct.t1* %p1 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %0, i8* getelementptr inbounds (%struct.t1* @caller2.p1, i32 0, i32 0), i64 1, i32 1, i1 false)
|
|
|
|
|
%1 = bitcast %struct.t2* %p2 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %1, i8* bitcast ({ i16 }* @caller2.p2 to i8*), i64 2, i32 1, i1 false)
|
|
|
|
|
%2 = bitcast %struct.t3* %p3 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %2, i8* bitcast (%struct.t3* @caller2.p3 to i8*), i64 3, i32 1, i1 false)
|
|
|
|
|
%3 = bitcast %struct.t4* %p4 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* bitcast ({ i32 }* @caller2.p4 to i8*), i64 4, i32 1, i1 false)
|
|
|
|
|
%4 = bitcast %struct.t5* %p5 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %4, i8* bitcast (%struct.t5* @caller2.p5 to i8*), i64 5, i32 1, i1 false)
|
|
|
|
|
%5 = bitcast %struct.t6* %p6 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %5, i8* bitcast (%struct.t6* @caller2.p6 to i8*), i64 6, i32 1, i1 false)
|
|
|
|
|
%6 = bitcast %struct.t7* %p7 to i8*
|
|
|
|
|
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %6, i8* bitcast (%struct.t7* @caller2.p7 to i8*), i64 7, i32 1, i1 false)
|
|
|
|
|
%call = call i32 @callee2(i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, %struct.t1* byval %p1, %struct.t2* byval %p2, %struct.t3* byval %p3, %struct.t4* byval %p4, %struct.t5* byval %p5, %struct.t6* byval %p6, %struct.t7* byval %p7)
|
|
|
|
|
ret i32 %call
|
|
|
|
|
|
|
|
|
|
; CHECK: stb {{[0-9]+}}, 119(1)
|
|
|
|
|
; CHECK: sth {{[0-9]+}}, 126(1)
|
|
|
|
|
; CHECK: stb {{[0-9]+}}, 135(1)
|
|
|
|
|
; CHECK: sth {{[0-9]+}}, 133(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 140(1)
|
|
|
|
|
; CHECK: stb {{[0-9]+}}, 151(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 147(1)
|
|
|
|
|
; CHECK: sth {{[0-9]+}}, 158(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 154(1)
|
|
|
|
|
; CHECK: stb {{[0-9]+}}, 167(1)
|
|
|
|
|
; CHECK: sth {{[0-9]+}}, 165(1)
|
|
|
|
|
; CHECK: stw {{[0-9]+}}, 161(1)
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
define internal i32 @callee2(i32 %z1, i32 %z2, i32 %z3, i32 %z4, i32 %z5, i32 %z6, i32 %z7, i32 %z8, %struct.t1* byval %v1, %struct.t2* byval %v2, %struct.t3* byval %v3, %struct.t4* byval %v4, %struct.t5* byval %v5, %struct.t6* byval %v6, %struct.t7* byval %v7) nounwind {
|
|
|
|
|
entry:
|
|
|
|
|
%z1.addr = alloca i32, align 4
|
|
|
|
|
%z2.addr = alloca i32, align 4
|
|
|
|
|
%z3.addr = alloca i32, align 4
|
|
|
|
|
%z4.addr = alloca i32, align 4
|
|
|
|
|
%z5.addr = alloca i32, align 4
|
|
|
|
|
%z6.addr = alloca i32, align 4
|
|
|
|
|
%z7.addr = alloca i32, align 4
|
|
|
|
|
%z8.addr = alloca i32, align 4
|
|
|
|
|
store i32 %z1, i32* %z1.addr, align 4
|
|
|
|
|
store i32 %z2, i32* %z2.addr, align 4
|
|
|
|
|
store i32 %z3, i32* %z3.addr, align 4
|
|
|
|
|
store i32 %z4, i32* %z4.addr, align 4
|
|
|
|
|
store i32 %z5, i32* %z5.addr, align 4
|
|
|
|
|
store i32 %z6, i32* %z6.addr, align 4
|
|
|
|
|
store i32 %z7, i32* %z7.addr, align 4
|
|
|
|
|
store i32 %z8, i32* %z8.addr, align 4
|
|
|
|
|
%a = getelementptr inbounds %struct.t1* %v1, i32 0, i32 0
|
|
|
|
|
%0 = load i8* %a, align 1
|
|
|
|
|
%conv = zext i8 %0 to i32
|
|
|
|
|
%a1 = getelementptr inbounds %struct.t2* %v2, i32 0, i32 0
|
|
|
|
|
%1 = load i16* %a1, align 1
|
|
|
|
|
%conv2 = sext i16 %1 to i32
|
|
|
|
|
%add = add nsw i32 %conv, %conv2
|
|
|
|
|
%a3 = getelementptr inbounds %struct.t3* %v3, i32 0, i32 0
|
|
|
|
|
%2 = load i16* %a3, align 1
|
|
|
|
|
%conv4 = sext i16 %2 to i32
|
|
|
|
|
%add5 = add nsw i32 %add, %conv4
|
|
|
|
|
%a6 = getelementptr inbounds %struct.t4* %v4, i32 0, i32 0
|
|
|
|
|
%3 = load i32* %a6, align 1
|
|
|
|
|
%add7 = add nsw i32 %add5, %3
|
|
|
|
|
%a8 = getelementptr inbounds %struct.t5* %v5, i32 0, i32 0
|
|
|
|
|
%4 = load i32* %a8, align 1
|
|
|
|
|
%add9 = add nsw i32 %add7, %4
|
|
|
|
|
%a10 = getelementptr inbounds %struct.t6* %v6, i32 0, i32 0
|
|
|
|
|
%5 = load i32* %a10, align 1
|
|
|
|
|
%add11 = add nsw i32 %add9, %5
|
|
|
|
|
%a12 = getelementptr inbounds %struct.t7* %v7, i32 0, i32 0
|
|
|
|
|
%6 = load i32* %a12, align 1
|
|
|
|
|
%add13 = add nsw i32 %add11, %6
|
|
|
|
|
ret i32 %add13
|
|
|
|
|
|
|
|
|
|
; CHECK: lha {{[0-9]+}}, 126(1)
|
2013-03-18 22:12:04 +00:00
|
|
|
; CHECK: lha {{[0-9]+}}, 133(1)
|
2013-03-27 02:40:14 +00:00
|
|
|
; CHECK: lbz {{[0-9]+}}, 119(1)
|
This patch addresses PR13949.
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166022 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-16 13:30:53 +00:00
|
|
|
; CHECK: lwz {{[0-9]+}}, 140(1)
|
2013-03-18 22:12:04 +00:00
|
|
|
; CHECK: lwz {{[0-9]+}}, 147(1)
|
|
|
|
|
; CHECK: lwz {{[0-9]+}}, 154(1)
|
|
|
|
|
; CHECK: lwz {{[0-9]+}}, 161(1)
|
This patch addresses PR13949.
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166022 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-16 13:30:53 +00:00
|
|
|
}
|