6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-15 04:30:12 +00:00
Code Issues Projects Releases Wiki Activity
e95f704ed9
llvm-6502/test/CodeGen/X86/addr-mode-matcher.ll

63 lines
1.8 KiB
LLVM
Raw Normal View History

[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
; RUN: llc < %s | FileCheck %s
; This testcase used to hit an assert during ISel. For details, see the big
; comment inside the function.
; CHECK-LABEL: foo:
; The AND should be turned into a subreg access.
; CHECK-NOT: and
; The shift (leal) should be folded into the scale of the address in the load.
; CHECK-NOT: leal
; CHECK: movl {{.*}},4),
target datalayout = "e-m:o-p:32:32-f64:32:64-f80:128-n8:16:32-S128"
target triple = "i386-apple-macosx10.6.0"
define void @foo(i32 %a) {
bb:
br label %bb1692
bb1692:
%tmp1694 = phi i32 [ 0, %bb ], [ %tmp1745, %bb1692 ]
%xor = xor i32 0, %tmp1694
; %load1 = (load (and (shl %xor, 2), 1020))
%tmp1701 = shl i32 %xor, 2
%tmp1702 = and i32 %tmp1701, 1020
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%tmp1703 = getelementptr inbounds [1028 x i8], [1028 x i8]* null, i32 0, i32 %tmp1702
[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
%tmp1704 = bitcast i8* %tmp1703 to i32*
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%load1 = load i32, i32* %tmp1704, align 4
[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
; %load2 = (load (shl (and %xor, 255), 2))
%tmp1698 = and i32 %xor, 255
%tmp1706 = shl i32 %tmp1698, 2
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%tmp1707 = getelementptr inbounds [1028 x i8], [1028 x i8]* null, i32 0, i32 %tmp1706
[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
%tmp1708 = bitcast i8* %tmp1707 to i32*
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%load2 = load i32, i32* %tmp1708, align 4
[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
%tmp1710 = or i32 %load2, %a
; While matching xor we address-match %load1. The and-of-shift reassocication
; in address matching transform this into into a shift-of-and and the resuting
; node becomes identical to %load2. CSE replaces %load1 which leaves its
; references in MatchScope and RecordedNodes stale.
%tmp1711 = xor i32 %load1, %tmp1710
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%tmp1744 = getelementptr inbounds [256 x i32], [256 x i32]* null, i32 0, i32 %tmp1711
[ISel] Keep matching state consistent when folding during X86 address match In the X86 backend, matching an address is initiated by the 'addr' complex pattern and its friends. During this process we may reassociate and-of-shift into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the shift into the scale of the address. However as demonstrated by the testcase, this can trigger CSE of not only the shift and the AND which the code is prepared for but also the underlying load node. In the testcase this node is sitting in the RecordedNode and MatchScope data structures of the matcher and becomes a deleted node upon CSE. Returning from the complex pattern function, we try to access it again hitting an assert because the node is no longer a load even though this was checked before. Now obviously changing the DAG this late is bending the rules but I think it makes sense somewhat. Outside of addresses we prefer and-of-shift because it may lead to smaller immediates (FoldMaskAndShiftToScale is an even better example because it create a non-canonical node). We currently don't recognize addresses during DAGCombiner where arguably this canonicalization should be performed. On the other hand, having this in the matcher allows us to cover all the cases where an address can be used in an instruction. I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible for initiating the recursive CSE on users (http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it is not strictly necessary since the shift is hooked into the visited user. Of course it's safer to keep the DAG consistent at all times (e.g. for accurate number of uses, etc.). So rather than changing the fundamentals, I've decided to continue along the previous patches and detect the CSE. This patch installs a very targeted DAGUpdateListener for the duration of a complex-pattern match and updates the matching state accordingly. (Previous patches used HandleSDNode to detect the CSE but that's not practical here). The listener is only installed on X86. I tested that there is no measurable overhead due to this while running through the spec2k BC files with llc. The only thing we pay for is the creation of the listener. The callback never ever triggers in spec2k since this is a corner case. Fixes rdar://problem/18206171 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-03 20:00:34 +00:00
store i32 0, i32* %tmp1744, align 4
%tmp1745 = add i32 %tmp1694, 1
indirectbr i8* undef, [label %bb1756, label %bb1692]
bb1756:
br label %bb2705
bb2705:
indirectbr i8* undef, [label %bb5721, label %bb5736]
bb5721:
br label %bb2705
bb5736:
ret void
}
Reference in New Issue Copy Permalink