Convert all tests using TCL-style quoting to use shell-style quoting.
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-02 12:47:22 +00:00
; RUN: llc < %s -mtriple=thumbv6-apple-darwin10 | grep rsbs | grep "#0"
2009-07-20 06:10:07 +00:00
%struct.FILE = type { i8 * , i32 , i32 , i16 , i16 , %struct.__sbuf , i32 , i8 * , i32 ( i8 * ) * , i32 ( i8 * , i8 * , i32 ) * , i64 ( i8 * , i64 , i32 ) * , i32 ( i8 * , i8 * , i32 ) * , %struct.__sbuf , %struct.__sFILEX * , i32 , [ 3 x i8 ] , [ 1 x i8 ] , %struct.__sbuf , i32 , i64 }
%struct.__sFILEX = type opaque
%struct.__sbuf = type { i8 * , i32 }
%struct.adpcm_state = type { i16 , i8 }
@stepsizeTable = internal constant [ 89 x i32 ] [ i32 7 , i32 8 , i32 9 , i32 10 , i32 11 , i32 12 , i32 13 , i32 14 , i32 16 , i32 17 , i32 19 , i32 21 , i32 23 , i32 25 , i32 28 , i32 31 , i32 34 , i32 37 , i32 41 , i32 45 , i32 50 , i32 55 , i32 60 , i32 66 , i32 73 , i32 80 , i32 88 , i32 97 , i32 107 , i32 118 , i32 130 , i32 143 , i32 157 , i32 173 , i32 190 , i32 209 , i32 230 , i32 253 , i32 279 , i32 307 , i32 337 , i32 371 , i32 408 , i32 449 , i32 494 , i32 544 , i32 598 , i32 658 , i32 724 , i32 796 , i32 876 , i32 963 , i32 1060 , i32 1166 , i32 1282 , i32 1411 , i32 1552 , i32 1707 , i32 1878 , i32 2066 , i32 2272 , i32 2499 , i32 2749 , i32 3024 , i32 3327 , i32 3660 , i32 4026 , i32 4428 , i32 4871 , i32 5358 , i32 5894 , i32 6484 , i32 7132 , i32 7845 , i32 8630 , i32 9493 , i32 10442 , i32 11487 , i32 12635 , i32 13899 , i32 15289 , i32 16818 , i32 18500 , i32 20350 , i32 22385 , i32 24623 , i32 27086 , i32 29794 , i32 32767 ] ; <[89 x i32]*> [#uses=4]
@indexTable = internal constant [ 16 x i32 ] [ i32 -1 , i32 -1 , i32 -1 , i32 -1 , i32 2 , i32 4 , i32 6 , i32 8 , i32 -1 , i32 -1 , i32 -1 , i32 -1 , i32 2 , i32 4 , i32 6 , i32 8 ] ; <[16 x i32]*> [#uses=2]
@abuf = common global [ 500 x i8 ] zeroinitializer ; <[500 x i8]*> [#uses=1]
@.str = private constant [ 11 x i8 ] c "input file\00" , section "__TEXT,__cstring,cstring_literals" , align 1 ; <[11 x i8]*> [#uses=1]
@sbuf = common global [ 1000 x i16 ] zeroinitializer ; <[1000 x i16]*> [#uses=1]
@state = common global %struct.adpcm_state zeroinitializer ; <%struct.adpcm_state*> [#uses=3]
@__stderrp = external global %struct.FILE * ; <%struct.FILE**> [#uses=1]
@.str1 = private constant [ 28 x i8 ] c "Final valprev=%d, index=%d\0A\00" , section "__TEXT,__cstring,cstring_literals" , align 1 ; <[28 x i8]*> [#uses=1]
2010-06-17 15:18:27 +00:00
define void @adpcm_coder ( i16 * nocapture %indata , i8 * nocapture %outdata , i32 %len , %struct.adpcm_state * nocapture %state ) nounwind {
2009-07-20 06:10:07 +00:00
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%0 = getelementptr %struct.adpcm_state , %struct.adpcm_state * %state , i32 0 , i32 0 ; <i16*> [#uses=2]
2015-02-27 21:17:42 +00:00
%1 = load i16 , i16 * %0 , align 2 ; <i16> [#uses=1]
2009-07-20 06:10:07 +00:00
%2 = sext i16 %1 to i32 ; <i32> [#uses=2]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%3 = getelementptr %struct.adpcm_state , %struct.adpcm_state * %state , i32 0 , i32 1 ; <i8*> [#uses=2]
2015-02-27 21:17:42 +00:00
%4 = load i8 , i8 * %3 , align 2 ; <i8> [#uses=1]
2009-07-20 06:10:07 +00:00
%5 = sext i8 %4 to i32 ; <i32> [#uses=3]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%6 = getelementptr [ 89 x i32 ] , [ 89 x i32 ] * @stepsizeTable , i32 0 , i32 %5 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%7 = load i32 , i32 * %6 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%8 = icmp sgt i32 %len , 0 ; <i1> [#uses=1]
br i1 %8 , label %bb , label %bb27
bb: ; preds = %bb25, %entry
%indvar = phi i32 [ 0 , %entry ] , [ %indvar.next , %bb25 ] ; <i32> [#uses=2]
%outp.136 = phi i8 * [ %outdata , %entry ] , [ %outp.0 , %bb25 ] ; <i8*> [#uses=3]
%bufferstep.035 = phi i32 [ 1 , %entry ] , [ %tmp , %bb25 ] ; <i32> [#uses=3]
%outputbuffer.134 = phi i32 [ undef , %entry ] , [ %outputbuffer.0 , %bb25 ] ; <i32> [#uses=2]
%index.033 = phi i32 [ %5 , %entry ] , [ %index.2 , %bb25 ] ; <i32> [#uses=1]
%valpred.132 = phi i32 [ %2 , %entry ] , [ %valpred.2 , %bb25 ] ; <i32> [#uses=2]
%step.031 = phi i32 [ %7 , %entry ] , [ %36 , %bb25 ] ; <i32> [#uses=5]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%inp.038 = getelementptr i16 , i16 * %indata , i32 %indvar ; <i16*> [#uses=1]
2015-02-27 21:17:42 +00:00
%9 = load i16 , i16 * %inp.038 , align 2 ; <i16> [#uses=1]
2009-07-20 06:10:07 +00:00
%10 = sext i16 %9 to i32 ; <i32> [#uses=1]
%11 = sub i32 %10 , %valpred.132 ; <i32> [#uses=3]
%12 = icmp slt i32 %11 , 0 ; <i1> [#uses=1]
%iftmp.1.0 = select i1 %12 , i32 8 , i32 0 ; <i32> [#uses=2]
%13 = sub i32 0 , %11 ; <i32> [#uses=1]
%14 = icmp eq i32 %iftmp.1.0 , 0 ; <i1> [#uses=2]
%. = select i1 %14 , i32 %11 , i32 %13 ; <i32> [#uses=2]
%15 = ashr i32 %step.031 , 3 ; <i32> [#uses=1]
%16 = icmp slt i32 %. , %step.031 ; <i1> [#uses=2]
%delta.0 = select i1 %16 , i32 0 , i32 4 ; <i32> [#uses=2]
%17 = select i1 %16 , i32 0 , i32 %step.031 ; <i32> [#uses=2]
%diff.1 = sub i32 %. , %17 ; <i32> [#uses=2]
%18 = ashr i32 %step.031 , 1 ; <i32> [#uses=2]
%19 = icmp slt i32 %diff.1 , %18 ; <i1> [#uses=2]
%20 = or i32 %delta.0 , 2 ; <i32> [#uses=1]
%21 = select i1 %19 , i32 %delta.0 , i32 %20 ; <i32> [#uses=1]
%22 = select i1 %19 , i32 0 , i32 %18 ; <i32> [#uses=2]
%diff.2 = sub i32 %diff.1 , %22 ; <i32> [#uses=1]
%23 = ashr i32 %step.031 , 2 ; <i32> [#uses=2]
%24 = icmp slt i32 %diff.2 , %23 ; <i1> [#uses=2]
%25 = zext i1 %24 to i32 ; <i32> [#uses=1]
%26 = select i1 %24 , i32 0 , i32 %23 ; <i32> [#uses=1]
%vpdiff.0 = add i32 %17 , %15 ; <i32> [#uses=1]
%vpdiff.1 = add i32 %vpdiff.0 , %22 ; <i32> [#uses=1]
%vpdiff.2 = add i32 %vpdiff.1 , %26 ; <i32> [#uses=2]
%tmp30 = sub i32 0 , %vpdiff.2 ; <i32> [#uses=1]
%valpred.0.p = select i1 %14 , i32 %vpdiff.2 , i32 %tmp30 ; <i32> [#uses=1]
%valpred.0 = add i32 %valpred.0.p , %valpred.132 ; <i32> [#uses=3]
%27 = icmp sgt i32 %valpred.0 , 32767 ; <i1> [#uses=1]
br i1 %27 , label %bb18 , label %bb16
bb16: ; preds = %bb
%28 = icmp slt i32 %valpred.0 , -32768 ; <i1> [#uses=1]
br i1 %28 , label %bb17 , label %bb18
bb17: ; preds = %bb16
br label %bb18
bb18: ; preds = %bb17, %bb16, %bb
%valpred.2 = phi i32 [ -32768 , %bb17 ] , [ 32767 , %bb ] , [ %valpred.0 , %bb16 ] ; <i32> [#uses=2]
%delta.1 = or i32 %21 , %iftmp.1.0 ; <i32> [#uses=1]
%delta.2 = or i32 %delta.1 , %25 ; <i32> [#uses=1]
%29 = xor i32 %delta.2 , 1 ; <i32> [#uses=3]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%30 = getelementptr [ 16 x i32 ] , [ 16 x i32 ] * @indexTable , i32 0 , i32 %29 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%31 = load i32 , i32 * %30 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%32 = add i32 %31 , %index.033 ; <i32> [#uses=2]
%33 = icmp slt i32 %32 , 0 ; <i1> [#uses=1]
%index.1 = select i1 %33 , i32 0 , i32 %32 ; <i32> [#uses=2]
%34 = icmp sgt i32 %index.1 , 88 ; <i1> [#uses=1]
%index.2 = select i1 %34 , i32 88 , i32 %index.1 ; <i32> [#uses=3]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%35 = getelementptr [ 89 x i32 ] , [ 89 x i32 ] * @stepsizeTable , i32 0 , i32 %index.2 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%36 = load i32 , i32 * %35 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%37 = icmp eq i32 %bufferstep.035 , 0 ; <i1> [#uses=1]
br i1 %37 , label %bb24 , label %bb23
bb23: ; preds = %bb18
%38 = shl i32 %29 , 4 ; <i32> [#uses=1]
%39 = and i32 %38 , 240 ; <i32> [#uses=1]
br label %bb25
bb24: ; preds = %bb18
%40 = trunc i32 %29 to i8 ; <i8> [#uses=1]
%41 = and i8 %40 , 15 ; <i8> [#uses=1]
%42 = trunc i32 %outputbuffer.134 to i8 ; <i8> [#uses=1]
%43 = or i8 %41 , %42 ; <i8> [#uses=1]
store i8 %43 , i8 * %outp.136 , align 1
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%44 = getelementptr i8 , i8 * %outp.136 , i32 1 ; <i8*> [#uses=1]
2009-07-20 06:10:07 +00:00
br label %bb25
bb25: ; preds = %bb24, %bb23
%outputbuffer.0 = phi i32 [ %39 , %bb23 ] , [ %outputbuffer.134 , %bb24 ] ; <i32> [#uses=2]
%outp.0 = phi i8 * [ %outp.136 , %bb23 ] , [ %44 , %bb24 ] ; <i8*> [#uses=2]
%tmp = xor i32 %bufferstep.035 , 1 ; <i32> [#uses=1]
%indvar.next = add i32 %indvar , 1 ; <i32> [#uses=2]
%exitcond = icmp eq i32 %indvar.next , %len ; <i1> [#uses=1]
br i1 %exitcond , label %bb26.bb27_crit_edge , label %bb
bb26.bb27_crit_edge: ; preds = %bb25
%phitmp44 = icmp eq i32 %bufferstep.035 , 1 ; <i1> [#uses=1]
br label %bb27
bb27: ; preds = %bb26.bb27_crit_edge, %entry
%outp.1.lcssa = phi i8 * [ %outp.0 , %bb26.bb27_crit_edge ] , [ %outdata , %entry ] ; <i8*> [#uses=1]
%bufferstep.0.lcssa = phi i1 [ %phitmp44 , %bb26.bb27_crit_edge ] , [ false , %entry ] ; <i1> [#uses=1]
%outputbuffer.1.lcssa = phi i32 [ %outputbuffer.0 , %bb26.bb27_crit_edge ] , [ undef , %entry ] ; <i32> [#uses=1]
%index.0.lcssa = phi i32 [ %index.2 , %bb26.bb27_crit_edge ] , [ %5 , %entry ] ; <i32> [#uses=1]
%valpred.1.lcssa = phi i32 [ %valpred.2 , %bb26.bb27_crit_edge ] , [ %2 , %entry ] ; <i32> [#uses=1]
br i1 %bufferstep.0.lcssa , label %bb28 , label %bb29
bb28: ; preds = %bb27
%45 = trunc i32 %outputbuffer.1.lcssa to i8 ; <i8> [#uses=1]
store i8 %45 , i8 * %outp.1.lcssa , align 1
br label %bb29
bb29: ; preds = %bb28, %bb27
%46 = trunc i32 %valpred.1.lcssa to i16 ; <i16> [#uses=1]
store i16 %46 , i16 * %0 , align 2
%47 = trunc i32 %index.0.lcssa to i8 ; <i8> [#uses=1]
store i8 %47 , i8 * %3 , align 2
ret void
}
2010-06-17 15:18:27 +00:00
define void @adpcm_decoder ( i8 * nocapture %indata , i16 * nocapture %outdata , i32 %len , %struct.adpcm_state * nocapture %state ) nounwind {
2009-07-20 06:10:07 +00:00
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%0 = getelementptr %struct.adpcm_state , %struct.adpcm_state * %state , i32 0 , i32 0 ; <i16*> [#uses=2]
2015-02-27 21:17:42 +00:00
%1 = load i16 , i16 * %0 , align 2 ; <i16> [#uses=1]
2009-07-20 06:10:07 +00:00
%2 = sext i16 %1 to i32 ; <i32> [#uses=2]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%3 = getelementptr %struct.adpcm_state , %struct.adpcm_state * %state , i32 0 , i32 1 ; <i8*> [#uses=2]
2015-02-27 21:17:42 +00:00
%4 = load i8 , i8 * %3 , align 2 ; <i8> [#uses=1]
2009-07-20 06:10:07 +00:00
%5 = sext i8 %4 to i32 ; <i32> [#uses=3]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%6 = getelementptr [ 89 x i32 ] , [ 89 x i32 ] * @stepsizeTable , i32 0 , i32 %5 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%7 = load i32 , i32 * %6 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%8 = icmp sgt i32 %len , 0 ; <i1> [#uses=1]
br i1 %8 , label %bb , label %bb22
bb: ; preds = %bb20, %entry
%indvar = phi i32 [ 0 , %entry ] , [ %indvar.next , %bb20 ] ; <i32> [#uses=2]
%inp.131 = phi i8 * [ %indata , %entry ] , [ %inp.0 , %bb20 ] ; <i8*> [#uses=3]
%bufferstep.028 = phi i32 [ 0 , %entry ] , [ %tmp , %bb20 ] ; <i32> [#uses=2]
%inputbuffer.127 = phi i32 [ undef , %entry ] , [ %inputbuffer.0 , %bb20 ] ; <i32> [#uses=2]
%index.026 = phi i32 [ %5 , %entry ] , [ %index.2 , %bb20 ] ; <i32> [#uses=1]
%valpred.125 = phi i32 [ %2 , %entry ] , [ %valpred.2 , %bb20 ] ; <i32> [#uses=1]
%step.024 = phi i32 [ %7 , %entry ] , [ %35 , %bb20 ] ; <i32> [#uses=4]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%outp.030 = getelementptr i16 , i16 * %outdata , i32 %indvar ; <i16*> [#uses=1]
2009-07-20 06:10:07 +00:00
%9 = icmp eq i32 %bufferstep.028 , 0 ; <i1> [#uses=1]
br i1 %9 , label %bb2 , label %bb3
bb2: ; preds = %bb
2015-02-27 21:17:42 +00:00
%10 = load i8 , i8 * %inp.131 , align 1 ; <i8> [#uses=1]
2009-07-20 06:10:07 +00:00
%11 = sext i8 %10 to i32 ; <i32> [#uses=2]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%12 = getelementptr i8 , i8 * %inp.131 , i32 1 ; <i8*> [#uses=1]
2009-07-20 06:10:07 +00:00
%13 = ashr i32 %11 , 4 ; <i32> [#uses=1]
br label %bb3
bb3: ; preds = %bb2, %bb
%inputbuffer.0 = phi i32 [ %11 , %bb2 ] , [ %inputbuffer.127 , %bb ] ; <i32> [#uses=1]
%delta.0.in = phi i32 [ %13 , %bb2 ] , [ %inputbuffer.127 , %bb ] ; <i32> [#uses=5]
%inp.0 = phi i8 * [ %12 , %bb2 ] , [ %inp.131 , %bb ] ; <i8*> [#uses=1]
%delta.0 = and i32 %delta.0.in , 15 ; <i32> [#uses=1]
%tmp = xor i32 %bufferstep.028 , 1 ; <i32> [#uses=1]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%14 = getelementptr [ 16 x i32 ] , [ 16 x i32 ] * @indexTable , i32 0 , i32 %delta.0 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%15 = load i32 , i32 * %14 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%16 = add i32 %15 , %index.026 ; <i32> [#uses=2]
%17 = icmp slt i32 %16 , 0 ; <i1> [#uses=1]
%index.1 = select i1 %17 , i32 0 , i32 %16 ; <i32> [#uses=2]
%18 = icmp sgt i32 %index.1 , 88 ; <i1> [#uses=1]
%index.2 = select i1 %18 , i32 88 , i32 %index.1 ; <i32> [#uses=3]
%19 = and i32 %delta.0.in , 8 ; <i32> [#uses=1]
%20 = ashr i32 %step.024 , 3 ; <i32> [#uses=1]
%21 = and i32 %delta.0.in , 4 ; <i32> [#uses=1]
%22 = icmp eq i32 %21 , 0 ; <i1> [#uses=1]
%23 = select i1 %22 , i32 0 , i32 %step.024 ; <i32> [#uses=1]
%vpdiff.0 = add i32 %23 , %20 ; <i32> [#uses=2]
%24 = and i32 %delta.0.in , 2 ; <i32> [#uses=1]
%25 = icmp eq i32 %24 , 0 ; <i1> [#uses=1]
br i1 %25 , label %bb11 , label %bb10
bb10: ; preds = %bb3
%26 = ashr i32 %step.024 , 1 ; <i32> [#uses=1]
%27 = add i32 %vpdiff.0 , %26 ; <i32> [#uses=1]
br label %bb11
bb11: ; preds = %bb10, %bb3
%vpdiff.1 = phi i32 [ %27 , %bb10 ] , [ %vpdiff.0 , %bb3 ] ; <i32> [#uses=2]
%28 = and i32 %delta.0.in , 1 ; <i32> [#uses=1]
%toBool = icmp eq i32 %28 , 0 ; <i1> [#uses=1]
br i1 %toBool , label %bb13 , label %bb12
bb12: ; preds = %bb11
%29 = ashr i32 %step.024 , 2 ; <i32> [#uses=1]
%30 = add i32 %vpdiff.1 , %29 ; <i32> [#uses=1]
br label %bb13
bb13: ; preds = %bb12, %bb11
%vpdiff.2 = phi i32 [ %30 , %bb12 ] , [ %vpdiff.1 , %bb11 ] ; <i32> [#uses=2]
%31 = icmp eq i32 %19 , 0 ; <i1> [#uses=1]
%tmp23 = sub i32 0 , %vpdiff.2 ; <i32> [#uses=1]
%valpred.0.p = select i1 %31 , i32 %vpdiff.2 , i32 %tmp23 ; <i32> [#uses=1]
%valpred.0 = add i32 %valpred.0.p , %valpred.125 ; <i32> [#uses=3]
%32 = icmp sgt i32 %valpred.0 , 32767 ; <i1> [#uses=1]
br i1 %32 , label %bb20 , label %bb18
bb18: ; preds = %bb13
%33 = icmp slt i32 %valpred.0 , -32768 ; <i1> [#uses=1]
br i1 %33 , label %bb19 , label %bb20
bb19: ; preds = %bb18
br label %bb20
bb20: ; preds = %bb19, %bb18, %bb13
%valpred.2 = phi i32 [ -32768 , %bb19 ] , [ 32767 , %bb13 ] , [ %valpred.0 , %bb18 ] ; <i32> [#uses=3]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 19:29:02 +00:00
%34 = getelementptr [ 89 x i32 ] , [ 89 x i32 ] * @stepsizeTable , i32 0 , i32 %index.2 ; <i32*> [#uses=1]
2015-02-27 21:17:42 +00:00
%35 = load i32 , i32 * %34 , align 4 ; <i32> [#uses=1]
2009-07-20 06:10:07 +00:00
%36 = trunc i32 %valpred.2 to i16 ; <i16> [#uses=1]
store i16 %36 , i16 * %outp.030 , align 2
%indvar.next = add i32 %indvar , 1 ; <i32> [#uses=2]
%exitcond = icmp eq i32 %indvar.next , %len ; <i1> [#uses=1]
br i1 %exitcond , label %bb22 , label %bb
bb22: ; preds = %bb20, %entry
%index.0.lcssa = phi i32 [ %5 , %entry ] , [ %index.2 , %bb20 ] ; <i32> [#uses=1]
%valpred.1.lcssa = phi i32 [ %2 , %entry ] , [ %valpred.2 , %bb20 ] ; <i32> [#uses=1]
%37 = trunc i32 %valpred.1.lcssa to i16 ; <i16> [#uses=1]
store i16 %37 , i16 * %0 , align 2
%38 = trunc i32 %index.0.lcssa to i8 ; <i8> [#uses=1]
store i8 %38 , i8 * %3 , align 2
ret void
}
2010-06-17 15:18:27 +00:00
define i32 @main ( ) nounwind {
2009-07-20 06:10:07 +00:00
entry:
br label %bb
bb: ; preds = %bb3, %entry
2015-03-13 18:20:45 +00:00
%0 = tail call i32 ( . . . ) * @read ( i32 0 , i8 * getelementptr ( [ 500 x i8 ] , [ 500 x i8 ] * @abuf , i32 0 , i32 0 ) , i32 500 ) nounwind ; <i32> [#uses=4]
2009-07-20 06:10:07 +00:00
%1 = icmp slt i32 %0 , 0 ; <i1> [#uses=1]
br i1 %1 , label %bb1 , label %bb2
bb1: ; preds = %bb
2015-03-13 18:20:45 +00:00
tail call void @perror ( i8 * getelementptr ( [ 11 x i8 ] , [ 11 x i8 ] * @.str , i32 0 , i32 0 ) ) nounwind
2009-07-20 06:10:07 +00:00
ret i32 1
bb2: ; preds = %bb
%2 = icmp eq i32 %0 , 0 ; <i1> [#uses=1]
br i1 %2 , label %bb4 , label %bb3
bb3: ; preds = %bb2
%3 = shl i32 %0 , 1 ; <i32> [#uses=1]
2015-03-13 18:20:45 +00:00
tail call void @adpcm_decoder ( i8 * getelementptr ( [ 500 x i8 ] , [ 500 x i8 ] * @abuf , i32 0 , i32 0 ) , i16 * getelementptr ( [ 1000 x i16 ] , [ 1000 x i16 ] * @sbuf , i32 0 , i32 0 ) , i32 %3 , %struct.adpcm_state * @state ) nounwind
2009-07-20 06:10:07 +00:00
%4 = shl i32 %0 , 2 ; <i32> [#uses=1]
2015-03-13 18:20:45 +00:00
%5 = tail call i32 ( . . . ) * @write ( i32 1 , i16 * getelementptr ( [ 1000 x i16 ] , [ 1000 x i16 ] * @sbuf , i32 0 , i32 0 ) , i32 %4 ) nounwind ; <i32> [#uses=0]
2009-07-20 06:10:07 +00:00
br label %bb
bb4: ; preds = %bb2
2015-02-27 21:17:42 +00:00
%6 = load %struct.FILE * , %struct.FILE * * @__stderrp , align 4 ; <%struct.FILE*> [#uses=1]
2015-03-13 18:20:45 +00:00
%7 = load i16 , i16 * getelementptr ( %struct.adpcm_state , %struct.adpcm_state * @state , i32 0 , i32 0 ) , align 4 ; <i16> [#uses=1]
2009-07-20 06:10:07 +00:00
%8 = sext i16 %7 to i32 ; <i32> [#uses=1]
2015-03-13 18:20:45 +00:00
%9 = load i8 , i8 * getelementptr ( %struct.adpcm_state , %struct.adpcm_state * @state , i32 0 , i32 1 ) , align 2 ; <i8> [#uses=1]
2009-07-20 06:10:07 +00:00
%10 = sext i8 %9 to i32 ; <i32> [#uses=1]
2015-03-13 18:20:45 +00:00
%11 = tail call i32 ( %struct.FILE * , i8 * , . . . ) * @fprintf ( %struct.FILE * %6 , i8 * getelementptr ( [ 28 x i8 ] , [ 28 x i8 ] * @.str1 , i32 0 , i32 0 ) , i32 %8 , i32 %10 ) nounwind ; <i32> [#uses=0]
2009-07-20 06:10:07 +00:00
ret i32 0
}
2010-06-17 15:18:27 +00:00
declare i32 @read ( . . . )
2009-07-20 06:10:07 +00:00
2010-06-17 15:18:27 +00:00
declare void @perror ( i8 * nocapture ) nounwind
2009-07-20 06:10:07 +00:00
2010-06-17 15:18:27 +00:00
declare i32 @write ( . . . )
2009-07-20 06:10:07 +00:00
2010-06-17 15:18:27 +00:00
declare i32 @fprintf ( %struct.FILE * nocapture , i8 * nocapture , . . . ) nounwind
