This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209082 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary step to help ease the construction of CallLoweringInfo.
Changing the construction to a chained function pattern requires that the
parameter be nullable. However, rather than copying the vector, save a pointer
rather than the reference to permit a late binding of the arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209080 91177308-0d34-0410-b5e6-96231b3b80d8
The problem occurs when a non-i1 setcc is inverted. For example 'i8 = setcc' will get 'xor 0xff' to invert this. This is clearly wrong when the boolean contents are ZeroOrOne.
This patch introduces getLogicalNOT and updates SetCC legalisation to use it.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208641 91177308-0d34-0410-b5e6-96231b3b80d8
Right now the load may not get DCE'd because of the side-effect of updating
the base pointer.
This can happen if we lower a read-modify-write of an illegal larger type
(e.g. i48) such that the modification only affects one of the subparts (the
lower i32 part but not the higher i16 part). See the testcase.
In order to spot the dead load we need to revisit it when SimplifyDemandedBits
decided that the value of the load is masked off. This is the
CommitTargetLoweringOpt piece.
I checked compile time with ARM64 by sending SPEC bitcode files through llc.
No measurable change.
Fixes <rdar://problem/16031651>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208640 91177308-0d34-0410-b5e6-96231b3b80d8
We must validate the value type in TLI::getRegisterByName, because if we
don't and the wrong type was used with the IR intrinsic, then we'll assert
(because we won't be able to find a valid register class with which to
construct the requested copy operation). For PPC64, additionally, the type
information is necessary to decide between the 64-bit register and the 32-bit
subregister.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208508 91177308-0d34-0410-b5e6-96231b3b80d8
When using the ARM AAPCS, HFAs (Homogeneous Floating-point Aggregates) must
be passed in a block of consecutive floating-point registers, or on the stack.
This means that unused floating-point registers cannot be back-filled with
part of an HFA, however this can currently happen. This patch, along with the
corresponding clang patch (http://reviews.llvm.org/D3083) prevents this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208413 91177308-0d34-0410-b5e6-96231b3b80d8
When reducing the bitwidth of a comparison against a constant, the
original setcc's result type was used, which was incorrect.
No test since I don't think any other in tree targets change the
bitwidth of the setcc type depending on the bitwidth of the compared
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208236 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208104 91177308-0d34-0410-b5e6-96231b3b80d8
For pattern like ((x >> C1) & Mask) << C2, DAG combiner may convert it
into (x >> (C1-C2)) & (Mask << C2), which makes pattern matching of ubfx
more difficult.
For example:
Given
%shr = lshr i64 %x, 4
%and = and i64 %shr, 15
%arrayidx = getelementptr inbounds [8 x [64 x i64]]* @arr, i64 0, %i64 2, i64 %and
%0 = load i64* %arrayidx
With current shift folding, it takes 3 instrs to compute base address:
lsr x8, x0, #1
and x8, x8, #0x78
add x8, x9, x8
If using ubfx, it only needs 2 instrs:
ubfx x8, x0, #4, #4
add x8, x9, x8, lsl #3
This fixes bug 19589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207702 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise the legalizer would just scalarize everything. Support for
mulhi in the targets isn't that great yet so on most targets we get
exactly the same scalarized output. Add a test for x86 vector udiv.
I had to disable the mulhi nodes on ARM because there aren't any patterns
for it. As far as I know ARM has instructions for getting the high part of
a multiply so this should be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207315 91177308-0d34-0410-b5e6-96231b3b80d8
The included test case would return the incorrect results, because the expansion
of an shift with a constant shift amount of 0 would generate undefined behavior.
This is because ExpandShiftByConstant assumes that all shifts by constants with
a value of 0 have already been optimized away. This doesn't happen for opaque
constants and usually this isn't a problem, because opaque constants won't take
this code path - they are not supposed to. In the case that the opaque constant
has to be expanded by the legalizer, the legalizer would drop the opaque flag.
In this case we hit the limitations of ExpandShiftByConstant and create incorrect
code.
This commit fixes the legalizer by not dropping the opaque flag when expanding
opaque constants and adding an assertion to ExpandShiftByConstant to catch this
not supported case in the future.
This fixes <rdar://problem/16718472>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207304 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
various .cpp files. This macro is inherently non-modular, and it wasn't
even needed in this header file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206775 91177308-0d34-0410-b5e6-96231b3b80d8
Win64 stack unwinder gets confused when execution flow "falls through" after
a call to 'noreturn' function. This fixes the "missing epilogue" problem by
emitting a trap instruction for IR 'unreachable' on x86_x64-pc-windows.
A secondary use for it would be for anyone wanting to make double-sure that
'noreturn' functions, indeed, do not return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206684 91177308-0d34-0410-b5e6-96231b3b80d8
This particular DAG combine is designed to kick in when both ConstantFPs will
end up being loaded via a litpool, however those nodes have a semi-legal
status, dictated by isFPImmLegal so in some cases there wouldn't have been a
litpool in the first place. Don't try to be clever in those circumstances.
Picked up while merging some AArch64 tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206365 91177308-0d34-0410-b5e6-96231b3b80d8
handles Intrinsic::trap if TargetOptions::TrapFuncName is set.
This fixes a bug in which the trap function was not taken into consideration
when a program was compiled without optimization (at -O0).
<rdar://problem/16291933>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206323 91177308-0d34-0410-b5e6-96231b3b80d8
ARM64 suffered multiple -verify-machineinstr failures (principally over the
xsp/xzr issue) because FastISel was completely ignoring which subset of the
general-purpose registers each instruction required.
More fixes are coming in ARM64 specific FastISel, but this should cover the
generic problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206283 91177308-0d34-0410-b5e6-96231b3b80d8
We had disabled use of TBAA during CodeGen (even when otherwise using AA)
because the ptrtoint/inttoptr used by CGP for address sinking caused BasicAA to
miss basic type punning that it should catch (and, thus, we'd fail to override
TBAA when we should).
However, when AA is in use during CodeGen, CGP now uses normal GEPs and
bitcasts, instead of ptrtoint/inttoptr, when doing address sinking. As a
result, BasicAA should be able to make us do the right thing in the face of
type-punning, and it seems safe to enable use of TBAA again. self-hosting seems
fine on PPC64/Linux on the P7, with TBAA enabled and -misched=shuffle.
Note: We still don't update TBAA when merging stack slots, although because
BasicAA should now catch all such cases, this is no longer a blocking issue.
Nevertheless, I plan to commit code to deal with this properly in the near
future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206093 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetLowering::expandMUL() helper contains lowering code extracted
from the DAGTypeLegalizer and allows the SelectionDAGLegalizer to expand more
ISD::MUL patterns without having to use a library call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206037 91177308-0d34-0410-b5e6-96231b3b80d8
This code has been moved to a new function in the TargetLowering
class called expandMUL(). The purpose of this is to be able
to share lowering code between the SelectionDAGLegalize and
DAGTypeLegalizer classes.
No functionality changed intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206036 91177308-0d34-0410-b5e6-96231b3b80d8
FoldConstantArithmetic() only knows how to deal with a few target independent
ISD opcodes. Bail early if it sees a target-specific ISD node. These node do
funny things with operand types which may break the assumptions of the code
that follows, and there's no actual folding that can be done anyway. For example,
non-constant 256 bit vector shifts on X86 have a shift-amount operand that's a
128-bit v4i32 vector regardless of what the first operand type is and that breaks
the assumption that the operand types must match.
rdar://16530923
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205937 91177308-0d34-0410-b5e6-96231b3b80d8
sign/zero/any extensions. However a few places were not checking properly the
property of the load and were turning an indexed load into a regular extended
load. Therefore the indexed value was lost during the process and this was
triggering an assertion.
<rdar://problem/16389332>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205923 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR16365 - Extremely slow compilation in -O1 and -O2.
The SD scheduler has a quadratic implementation of load clustering
which absolutely blows up compile time for large blocks with constant
pool loads. The MI scheduler has a better implementation of load
clustering. However, we have not done the work yet to completely
eliminate the SD scheduler. Some benchmarks still seem to benefit from
early load clustering, although maybe by chance.
As an intermediate term fix, I just put a nice limit on the number of
DAG users to search before finding a match. With this limit there are no
binary differences in the LLVM test suite, and the PR16365 test case
does not suffer any compile time impact from this routine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205738 91177308-0d34-0410-b5e6-96231b3b80d8
This way, you can check the number of sign bits in the
operands. The depth parameter it already has is pretty useless
without this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205649 91177308-0d34-0410-b5e6-96231b3b80d8
When LLVM sees something like (v1iN (vselect v1i1, v1iN, v1iN)) it can
decide that the result is OK (v1i64 is legal on AArch64, for example)
but it still need scalarising because of that v1i1. There was no code
to do this though.
AArch64 and ARM64 have DAG combines to produce efficient code and
prevent that occuring in *most* such situations, but there are edge
cases that they miss. This adds a legalization to cope with that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205626 91177308-0d34-0410-b5e6-96231b3b80d8
There were several overlapping problems here, and this solution is
closely inspired by the one adopted in AArch64 in r201381.
Firstly, scalarisation of v1i1 setcc operations simply fails if the
input types are legal. This is fixed in LegalizeVectorTypes.cpp this
time, and allows AArch64 code to be simplified slightly.
Second, vselect with such a setcc feeding into it ends up in
ScalarizeVectorOperand, where it's not handled. I experimented with an
implementation, but found that whatever DAG came out was rather
horrific. I think Hao's DAG combine approach is a good one for
quality, though there are edge cases it won't catch (to be fixed
separately).
Should fix PR19335.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205625 91177308-0d34-0410-b5e6-96231b3b80d8
llc doesn't generate nodes for unconditional fall-through branches for targets
without FastISel implementation (X86 has it, but can be disabled by
"-fast-isel=false") in SelectionDAGBuilder::visitBr().
So for line 4 in the following testcase
1: void foo(int i){
2: switch(i){
3: default:
4: break;
5: }
6: return;
7: }
there is no corresponding line in .debug_line section, and a debugger
cannot set a breakpoint at line 4.
Fix this by always emitting a branch when we're not optimizing and add a
testcase to ensure that there's code on every line we'd want to break.
Patch by Daniil Fukalov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205529 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the ability to expand large (meaning with more than two unique
defined values) BUILD_VECTOR nodes in terms of SCALAR_TO_VECTOR and (legal)
vector shuffles. There is now no limit of the size we are capable of expanding
this way, although we don't currently do this for vectors with many unique
values because of the default implementation of TLI's
shouldExpandBuildVectorWithShuffles function.
There is currently no functional change to any existing targets because the new
capabilities are not used unless some target overrides the TLI
shouldExpandBuildVectorWithShuffles function. As a result, I've not included a
test case for the new functionality in this commit, but regression tests will
(at least) be added soon when I commit support for the PPC QPX vector
instruction set.
The benefit of committing this now is that it makes the
shouldExpandBuildVectorWithShuffles callback, which had to be added for other
reasons regardless, fully functional. I suspect that other targets will
also benefit from tuning the heuristic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205243 91177308-0d34-0410-b5e6-96231b3b80d8
There are two general methods for expanding a BUILD_VECTOR node:
1. Use SCALAR_TO_VECTOR on the defined scalar values and then shuffle
them together.
2. Build the vector on the stack and then load it.
Currently, we use a fixed heuristic: If there are only one or two unique
defined values, then we attempt an expansion in terms of SCALAR_TO_VECTOR and
vector shuffles (provided that the required shuffle mask is legal). Otherwise,
always expand via the stack. Even when SCALAR_TO_VECTOR is not legal, this
can still be a good idea depending on what tricks the target can play when
lowering the resulting shuffle. If the target can't do anything special,
however, and if SCALAR_TO_VECTOR is expanded via the stack, this heuristic
leads to sub-optimal code (two stack loads instead of one).
Because only the target knows whether the SCALAR_TO_VECTORs and shuffles for a
build vector of a particular type are likely to be optimial, this adds a new
TLI function: shouldExpandBuildVectorWithShuffles which takes the vector type
and the count of unique defined values. If this function returns true, then
method (1) will be used, subject to the constraint that all of the necessary
shuffles are legal (as determined by isShuffleMaskLegal). If this function
returns false, then method (2) is always used.
This commit does not enhance the current code to support expanding a
build_vector with more than two unique values using shuffles, but I'll commit
an implementation of the more-general case shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205230 91177308-0d34-0410-b5e6-96231b3b80d8
When the loop vectorizer vectorizes code that uses the loop induction variable,
we often end up with IR like this:
%b1 = insertelement <2 x i32> undef, i32 %v, i32 0
%b2 = shufflevector <2 x i32> %b1, <2 x i32> undef, <2 x i32> zeroinitializer
%i = add <2 x i32> %b2, <i32 2, i32 3>
If the add in this example is not legal (as is the case on PPC with VSX), it
will be scalarized, and we'll end up with a number of extract_vector_elt nodes
with the vector shuffle as the input operand, and that vector shuffle is fed by
one or more build_vector nodes. By the time that vector operations are
expanded, visitEXTRACT_VECTOR_ELT will not create new extract_vector_elt by
looking through the vector shuffle (to make sure that no illegal operations are
created), and so the extract_vector_elt -> vector shuffle -> build_vector is
never simplified to an operand of the build vector.
By looking at build_vectors through a shuffle we fix this particular situation,
preventing a vector from being built, only to be deconstructed again (for the
scalarized add) -- an expensive proposition when this all needs to be done via
the stack. We probably want a more comprehensive fix here where we look back
recursively through any shuffles to any build_vectors or scalar_to_vectors,
etc. but that can come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205179 91177308-0d34-0410-b5e6-96231b3b80d8
When expanding EXTRACT_VECTOR_ELT and EXTRACT_SUBVECTOR using
SelectionDAGLegalize::ExpandExtractFromVectorThroughStack, we store the entire
vector and then load the piece we want. This is fine in isolation, but
generating a new store (and corresponding stack slot) for each extraction ends
up producing code of poor quality. When we scalarize a vector operation (using
SelectionDAG::UnrollVectorOp for example) we generate one EXTRACT_VECTOR_ELT
for each element in the vector. This used to generate one stored copy of the
vector for each element in the vector. Now we search the uses of the vector for
a suitable store before generating a new one, which results in much more
efficient scalarization code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205153 91177308-0d34-0410-b5e6-96231b3b80d8
This adds back r204781.
Original message:
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204934 91177308-0d34-0410-b5e6-96231b3b80d8
Implementing the LLVM part of the call to __builtin___clear_cache
which translates into an intrinsic @llvm.clear_cache and is lowered
by each target, either to a call to __clear_cache or nothing at all
incase the caches are unified.
Updating LangRef and adding some tests for the implemented architectures.
Other archs will have to implement the method in case this builtin
has to be compiled for it, since the default behaviour is to bail
unimplemented.
A Clang patch is required for the builtin to be lowered into the
llvm intrinsic. This will be done next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204802 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r204781.
I will follow up to with msan folks to see what is what they
were trying to do with aliases to weak aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204784 91177308-0d34-0410-b5e6-96231b3b80d8
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204781 91177308-0d34-0410-b5e6-96231b3b80d8
Usually opaque constants shouldn't be folded, unless they are simple unary
operations that don't create new constants. Although this shouldn't drop the
opaque constant flag. This commit fixes this.
Related to <rdar://problem/14774662>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204737 91177308-0d34-0410-b5e6-96231b3b80d8
If GT/UGT or LT/ULT were set to expand, a comparison
with a constant would replace it with the illegal
cond code.
There are several more places later in this function that
will have the same basic problem.
Theoretically R600 should hit this problem for a test,
but for some reason it doesn't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204727 91177308-0d34-0410-b5e6-96231b3b80d8
And vice-versa, as long as the types are the same width.
There are a few R600 tests that will cover this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204616 91177308-0d34-0410-b5e6-96231b3b80d8
This patch renames method 'isConstantSplat' as 'getConstantSplatValue'
(mainly for consistency reasons), and rewrites its logic to ensure
that we always perform a legal 'cast<ConstantSDNode>'.
Added test shift-combine-crash.ll to verify that DAGCombiner no longer crashes with an assertion failure in the attempt to simplify a vector shift by a vector of all undef counts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204536 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than LegalizeAction::Expand, this needs LegalizeAction::Promote to get
promoted to fp_to_sint v8f32->v8i32. This is a legal operation on AVX.
For that to work properly, we also need to teach the legalizer about the
specific promotion required here. The default vector promotion uses
bitcasting to a vector type of the same total size. We want to promote the
vector element type, effectively widening the operation and then truncating
the result. This is analogous to the current logic of how int_to_fp is
promoted.
The change also factors out some code from the int_to_fp promotion code to
ValueType::widenIntegerVectorElementType. This is now shared between
int_to_fp and fp_to_int.
There is no longer need for the custom lowering of fp_to_sint f32->v8i16 in
X86. It can now go through the new target-independent fp_to_*int promotion
logic.
I also checked that no other target uses Promote for these ops yet, so there
shouldn't be any unexpected change in behavior.
Fixes <rdar://problem/16202247>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204058 91177308-0d34-0410-b5e6-96231b3b80d8
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203865 91177308-0d34-0410-b5e6-96231b3b80d8
for use with C++11 range-based for-loops.
The gist of phase 1 is to remove the skipInstruction() and skipBundle()
methods from these iterators, instead splitting each iterator into a version
that walks operands, a version that walks instructions, and a version that
walks bundles. This has the result of making some "clever" loops in lib/CodeGen
more verbose, but also makes their iterator invalidation characteristics much
more obvious to the casual reader. (Making them concise again in the future is a
good motivating case for a pre-incrementing range adapter!)
Phase 2 of this undertaking with consist of removing the getOperand() method,
and changing operator*() of the operand-walker to return a MachineOperand&. At
that point, it should be possible to add range views for them that work as one
might expect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203757 91177308-0d34-0410-b5e6-96231b3b80d8
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203559 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203364 91177308-0d34-0410-b5e6-96231b3b80d8
This is already done for shifts. Allow it for rotations as well. E.g.:
(rotl:i32 x, (trunc (and y, 31))) -> (rotl:i32 x, (and (trunc y), 31))
Use the newly factored-out distributeTruncateThroughAnd.
With this patch and some X86.td tweaks we should be able to remove redundant
masking of the rotation amount like in the example above. HW implicitly
performs this masking.
The testcase will be added as part of the X86 patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203316 91177308-0d34-0410-b5e6-96231b3b80d8
This is the new idiom:
x<<(y&31) | x>>((0-y)&31)
which is recognized as:
x ROTL (y&31)
The change refines matchRotateSub. In
Neg & (OpSize - 1) == (OpSize - Pos) & (OpSize - 1), if Pos is
Pos' & (OpSize - 1) we can just use Pos' instead of Pos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203315 91177308-0d34-0410-b5e6-96231b3b80d8
Slightly change the wording in the function comment. Originally, it can be
misunderstood as we turned the input into two subsequent rotates.
Better connect the comment which talks about Mask and the code which used
LoBits. Renamed variable to MaskLoBits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203314 91177308-0d34-0410-b5e6-96231b3b80d8
be split and the result type widened.
When the condition of a vselect has to be split it makes no sense widening the
vselect and thereby widening the condition. We end up in an endless loop of
widening (vselect result type) and splitting (condition mask type) doing this.
Instead, split both the condition and the vselect and widen the result.
I ran this over the test suite with i686 and mattr=+sse and saw no regressions.
Fixes PR18036.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203311 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to fold a binary OR between two
shufflevector into a single shuffle vector when possible.
The rules are:
1. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf A, B, Mask1)
2. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf B, A, Mask2)
The DAGCombiner can take advantage of the fact that OR is commutative and
compute two possible shuffle masks (Mask1 and Mask2) for the resulting
shuffle node.
Before folding a dag according to either rule 1 or 2, DAGCombiner verifies
that the resulting shuffle mask is legal for the target.
DAGCombiner would firstly try to fold according to 1.; If not possible
then it will try to fold according to 2.
If both Mask1 and Mask2 are illegal then we conservatively don't fold
the OR instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203156 91177308-0d34-0410-b5e6-96231b3b80d8
already lived there and it is where it belongs -- this is the in-memory
debug location representation.
This is just cleanup -- Modules can actually cope with this, but that
doesn't make it right. After chatting with folks that have out-of-tree
stuff, going ahead and moving the rest of the headers seems preferable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202960 91177308-0d34-0410-b5e6-96231b3b80d8
Patchpoints already did this. Doing it for stackmaps is a convenience
for the runtime in the event that it needs to scratch register to
patch or perform a runtime call thunk.
Unlike patchpoints, we just assume the AnyRegCC calling
convention. This is the only language and target independent calling
convention specific to stackmaps so makes sense. Although the calling
convention is not currently used to select the scratch registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202943 91177308-0d34-0410-b5e6-96231b3b80d8
selection dag (PR19012)
In X86SelectionDagInfo::EmitTargetCodeForMemcpy we check with MachineFrameInfo
to make sure that ESI isn't used as a base pointer register before we choose to
emit rep movs (which clobbers esi).
The problem is that MachineFrameInfo wouldn't know about dynamic allocas or
inline asm that clobbers the stack pointer until SelectionDAGBuilder has
encountered them.
This patch fixes the problem by checking for such things when building the
FunctionLoweringInfo.
Differential Revision: http://llvm-reviews.chandlerc.com/D2954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202930 91177308-0d34-0410-b5e6-96231b3b80d8
Currently this code is duplicated across visitSHL, visitSRA and visitSRL. The
plan is to add rotates as clients to this new function.
There is no functional change intended here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202908 91177308-0d34-0410-b5e6-96231b3b80d8
This extract-and-trunc vector optimization cannot work for i1 values as
currently implemented, and so I'm disabling this for now for i1 values. In the
future, this can be fixed properly.
Soon I'll commit support for i1 CR bit tracking in the PowerPC backend, and
this will be covered by one of the existing regression tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202449 91177308-0d34-0410-b5e6-96231b3b80d8
shifted mask rather than masking and shifting separately.
The patch adds this transformation to the DAGCombiner:
(shl (and (setcc:i8v16 ...) N01C) N1C) -> (and (setcc:i8v16 ...) N01C<<N1C)
<rdar://problem/16054492>
Patch by Adam Nemet <anemet@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201906 91177308-0d34-0410-b5e6-96231b3b80d8
This fix checks the original LLVM IR node to identify opaque constants by
looking for the bitcast-constant pattern. Originally we looked at the generated
SDNode, but this might lead to incorrect results. The SDNode could have been
generated by an constant expression that was folded to a constant.
This fixes <rdar://problem/16050719>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201291 91177308-0d34-0410-b5e6-96231b3b80d8
We are now no longer relying on the target-specific call lowering implementation
to lower a stackmap intrinsic call. Instead we perform the call lowering in a
target-independent way directly in the stackmap lowering code. This simplifies
the code and removes the need to fixup the code after the target-specific call
lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201263 91177308-0d34-0410-b5e6-96231b3b80d8
The ID type for the stackmap and patchpoint intrinsics are in both cases i64.
This fixes an zero extend in the SelectionDAGBuilder that still used i32. This
also updates the target independent instructions STACKMAP and PATCHPOINT to use
the correct type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201262 91177308-0d34-0410-b5e6-96231b3b80d8
BUILD_VECTOR nodes, e.g.:
(concat_vectors (BUILD_VECTOR a1, a2, a3, a4), (BUILD_VECTOR b1, b2, b3, b4))
->
(BUILD_VECTOR a1, a2, a3, a4, b1, b2, b3, b4)
This fixes an issue with AVX, where a sequence was not recognized as a 256-bit
vbroadcast due to the concat_vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201158 91177308-0d34-0410-b5e6-96231b3b80d8
During DAGCombine visitShiftByConstant assumes that certain binary operations
with only constant operands can always be folded successfully. This is no longer
true when the constant is opaque. This commit fixes visitShiftByConstant by not
performing the optimization for opaque constants. Otherwise we would end up in
an infinite DAGCombine loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200900 91177308-0d34-0410-b5e6-96231b3b80d8
Calls with inalloca are lowered by skipping all stores for arguments
passed in memory and the initial stack adjustment to allocate argument
memory.
Now the frontend is responsible for the memory layout, and the backend
doesn't have to do any work. As a result these changes are pretty
minimal.
Reviewers: echristo
Differential Revision: http://llvm-reviews.chandlerc.com/D2637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200596 91177308-0d34-0410-b5e6-96231b3b80d8
Allocas marked inalloca are never static, but we were trying to put them
into the static alloca map if they were in the entry block. Also add an
assertion in x86 fastisel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200593 91177308-0d34-0410-b5e6-96231b3b80d8
when the input is a concat_vectors and the insert replaces one of the
concat halves:
Lower half: fold (insert_subvector (concat_vectors X, Y), Z) ->
(concat_vectors Z, Y)
Upper half: fold (insert_subvector (concat_vectors X, Y), Z) ->
(concat_vectors X, Z)
This can be seen with the following IR:
define <8 x float> @lower_half(<4 x float> %v1, <4 x float> %v2, <4 x
float> %v3) {
%1 = shufflevector <4 x float> %v1, <4 x float> %v2, <8 x i32> <i32
0, i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7>
%2 = tail call <8 x float> @llvm.x86.avx.vinsertf128.ps.256(<8 x
float> %1, <4 x float> %v3, i8 0)
The vinsertf128 intrinsic is converted into an insert_subvector node
in SelectionDAGBuilder.cpp.
Using AVX, without the patch this generates two vinsertf128 instructions:
vinsertf128 $1, %xmm1, %ymm0, %ymm0
vinsertf128 $0, %xmm2, %ymm0, %ymm0
With the patch this is optimized into:
vinsertf128 $1, %xmm1, %ymm2, %ymm0
Patch by Robert Lougher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200506 91177308-0d34-0410-b5e6-96231b3b80d8
When converting from "or + br" to two branches, or converting from
"and + br" to two branches, we correctly update the edge weights of
the two branches.
The previous attempt at r200431 was reverted at r200434 because of
two testing case failures. I modified my patch a little, but forgot
to re-run "make check-all".
Testing case CodeGen/ARM/lsr-unfolded-offset.ll is updated because of
the patch's impact on branch probability which causes changes in
spill placement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200502 91177308-0d34-0410-b5e6-96231b3b80d8
When converting from "or + br" to two branches, or converting from
"and + br" to two branches, we correctly update the edge weights of
the two branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200431 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure that we don't introduce illegal build_vector dag nodes
when trying to fold a sign_extend of a build_vector.
This fixes a regression introduced by r200234.
Added test CodeGen/X86/fold-vector-sext-crash.ll
to verify that llc no longer crashes with an assertion failure
due to an illegal build_vector of type MVT::v4i64.
Thanks to Ilia Filippov for spotting this regression and for
providing a reproducible test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200313 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we used getIntImmCost from TargetTransformInfo to determine if
a load of a constant should be converted to just a constant, but the threshold
for this was set to an arbitrary value. This value works well for the two
targets (X86 and ARM) that implement this target-hook, but it isn't
target-independent at all.
Now targets have the possibility to decide directly if this optimization should
be performed. The default value is set to false to preserve the current
behavior. The target hook has been moved to TargetLowering, which removed the
last use and need of TargetTransformInfo in SelectionDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200271 91177308-0d34-0410-b5e6-96231b3b80d8
Also update the comment, since it actually produces a
select (setcc) instead of select_cc.
It was checking and using the setcc result type for the
type of the sext, instead of the type of the compared items.
In my problem case, the sext was to i32 and was used as the setcc type,
but the expected type was i64.
No test since I haven't been able to hit the problem with
this on any in-tree targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200249 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to fold a sext/aext/zext dag node when
the operand in input is a build vector of constants (or UNDEFs).
The inability to fold a sext/zext of a constant build_vector was the root
cause of some pcg bugs affecting vselect expansion on x86-64 with AVX support.
Before this change, the DAGCombiner only knew how to fold a sext/zext/aext of a
ConstantSDNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200234 91177308-0d34-0410-b5e6-96231b3b80d8
Issue outcomes from DAGCombiner::MergeConsequtiveStores, more precisely from
mem-ops sequence sorting.
Consider, how MergeConsequtiveStores works for next example:
store i8 1, a[0]
store i8 2, a[1]
store i8 3, a[1] ; a[1] again.
return ; DAG starts here
1. Method will collect all the 3 stores.
2. It sorts them by distance from the base pointer (farthest with highest
index).
3. It takes first consecutive non-overlapping stores and (if possible) replaces
them with a single store instruction.
The point is, we can't determine here which 'store' instruction
would be the second after sorting ('store 2' or 'store 3').
It happens that 'store 3' would be the second, and 'store 2' would be the third.
So after merging we have the next result:
store i16 (1 | 3 << 8), base ; is a[0] but bit-casted to i16
store i8 2, a[1]
So actually we swapped 'store 3' and 'store 2' and got wrong contents in a[1].
Fix: In sort routine just also take into account mem-op sequence number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200201 91177308-0d34-0410-b5e6-96231b3b80d8
